FTP Adapter polling lowercase or uppercase files using single adapter

Hello All,
I was wondering if we can use a single FTP Adapter to poll Lowercase or Uppercase files. For example either abc*.txt or ABC*.txt.
Does the FTP adapter by default support this option, because its not working in my Case and if its supported does it depend on the FTP server settings/security.
Help is much appreciated.
Thanks
Kris

Hema wrote:
How does it decide which files to pickup ? It will pick up files with modification dates more recent than the last processed file.
sometimes it picks up all old files from FTP directoryIf it is picking up the same files, probably it is not being able to calculate the modification dates.
That can be a configuration problem, take a look at this:
http://docs.oracle.com/cd/E17904_01/integration.1111/e10231/adptr_file.htm#BABECEGD
Note: We are not deleting already read files from the folderProbably, not a good thing to do. May you can archive them instead.
Cheers,
Vlad
Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question. If you think this is helpful, please consider giving points

Similar Messages

  • Sending empty files using SFTP Adapter

    I am trying to send empty files using SFTP adapter. The interface has to send the file whether its empty file or containing data using SFTP adapter. I am using BizTalk Server 2013 R2. Is it a bug or the hotfix is already there for this issue.

    The issue here is not your SFTP not able to send 0KB files, but the file receive adapter that is receiving the file. The file adapter deletes 0 KB files and doest not transmit it further.
    If u have a ftp receive for example you should be able to send 0KB files.
    If u have a custom file receive adapter , is it handling 0KB files ?
    Regards <br/> When you see answers and helpful posts,<br/> please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

  • Error on polling 2.5 gb file using FTP adapter

    HI All
    We have FTP adapter which is polling 2.5 gb of file on single node instance in SOA 11.1.1.6.
    It is working fine with single node instance but its failing on cluster 2 node instance.
    We are polling zip file and all the FTP configuration are made as per the HAFTPAdapter settings and its using SOA dataSource .We have changed all the possible setting for JTA  time out and also on data source XA transaction but still no luck.
    Error
    ====
    The action "update action" cannot be performed on the instance "2340091" because of its current state ("unknown").
    The current instance state did not allow the requested action to be performed.
    Consult the product documentation for a list of all the permissible actions that can be performed on an instance when it is in the "unknown" state.
    ORABPEL-02041……..
    [2013-11-28T05:57:00.324+00:00] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.dispatch] [tid: orabpel.invoke.pool-4.thread-14] [userId: <anonymous>] [ecid: fcc5d9e1c7acffe4:f35f602:14299c196ac:-8000-0000000000036f42,1:18707] [APP: soa-infra] [URI: /soa-infra/services/default/XMLValidation_FileNameBPEL/FileNameValidationBPEL_client_ep] failed to handle message[[
    weblogic.transaction.internal.TimedOutException: Transaction timed out after 302 seconds
    BEA1-25F2BD0F3E4FBDE133EB
        at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1788)
        at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1676)
        at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1988)
        at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1586)
        at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
        at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    =====
    Is there anything we need to check or change in SOA server configuration .
    Thanks
    AK

    Below are the settings which we tried out. The file where it's writing is shared network drive.
    1) SOA datasource
    <xa-transaction-timeout>1000</xa-transaction-timeout>
    2)JTA
    Parameter Name
    Default Value
    Tuned Value
    Timeout Seconds
    30
    3600
    Abandon Timeout Seconds
    86400
    3600
    Maximum Duration of XA Calls
    240000
    24000
    Thanks
    AK

  • How o place Flat file Using JMS Adapter.

    Hi Frnds,
    I have one scenario ,
    Sender side i am having IDOC, i want convet the IDOC into Flat file. But my receiver side i have to use only JMS Adapter,
    Flat file i have to place in FTP Server using JMS Adapter.
    Can ne share your thoughts..
    Regards,
    raj

    Raj,
    The below Link will help
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50061bd9-e56e-2910-3495-c5faa652b710
    Surya,
    Welcome Back to SDN.
    Regards
    Agasthuri Doss

  • How to handle empty file using sftp adapter

    Hi,
    Please explain me how to handle empty files in sftp adapter.
    Thanks,
    Enivass

    Hi Enivaas,
                        I don't have the seeburger sftp adapter at hand at the moment, but asfar as I remember, this does not specifically have an empty-file handling option like the standard ftp adapter.
    So to stop emtyp files from being written, guess would need to handle this at the mapping level. For example, check for target creation criteria in the header node in mapping. If the creation criteria is not met, you can throw an error in mapping.
    You may also incorporate this condition in your Receiver determination. In this case, if the condition is not satisfied, no receiver is determined in PI.
    Regards

  • How 2 read two files from 2 diff. directories, using single adapter

    How 2 read two files from 2 diff. directories in same system, using single file adapter.

    you can use advanced selection for source file
    see
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm

  • File adapter polling a folder and accepting a single document at a time?

    Hi,
    Is it possible to make file adapter read a single file at a time though it is polling a directory that may contain more than one document?
    In other words is it possible to make file adapter reading documents sequentially?
    Do I need to put a queue to achieve this?
    Queue will read the incoming documents and puts the documents to another directory one by ome so that the file adapter picks up only one file at a time?
    Thanks,
    Sasi Bhushan

    Hi,
    have you read
    http://download-uk.oracle.com/docs/cd/B31017_01/core.1013/b28941/soa.htm#CEGJIDAC
    There is explained what concurrency level you can achieve for adapters...

  • Polling Two or More Tables using DB Adapter

    Hi,
         Is it possible to poll two or more tables using a db adapter at a time?

    Hi,
         Is it possible to poll two or more tables using a db adapter at a time?

  • How to put edfact file using b2b adapter

    All,
    I have to print a edifact file and place it in a certain location using b2b and soa. could you please let me know how this could be done. in the b2b console i could see only listening channels. could this be done directly through b2b adapter or should i use soa adapter.. if either how..
    pls guide..
    regards
    Rakesh

    hi Anuj,
    i went through the docs
    1. the doc with the sample is hard to understand. i opened the composite, but i guess the b2b config changes also needs to be done. they are not clearly mentioned in the doc.
    2. cant find details to create outbound adapter in edifact faormat...
    you aware of any other links or samples. Also I am new to B2B...
    regards
    Rakesh

  • Read/Write using single adapter

    How can i move the files from one location to another location using single file adapter?

    Adapter can have only one operation either of the below.
    Read, Write, Synchronous and Listing
    To move the files you can refer the below URL and navigate to the below topic
    http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_file.htm#CIACJFHF
    *4.5.11 Copying, Moving, and Deleting Files*
    - It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
    Thanks,
    Vijay

  • File adapter polling and getting the file name 11g Jdeveloper

    I am using JDeveloper 11g. My process is something like;
    A file adapter reads a XML file
    This triggers the BPM process, file content is sent to start activity as message
    I have to get the file name that is read by file adapter.
    How to do that? Any help is appreciated.
    I have seen couple of answers like bellow in forum but did not help me much
    This is a very simple task in JDeveloper 11g, file adapters are linked to the receive activity, here there is a tab called Properties which you can use to extract the file name. Please follow the steps below:
    1. Create a Simple Type variable of string type, call it fileName_var or any name you wish.
    2. Open the Receive activity in your bpel project.
    3. Scroll down to jca.file.FileName and double click on the value column, click on the browse button (...), select Variable, then click the search icon
    4. Locate your recently created variable
    5. Now when your project runs it will assign the file name to this variable, you can use this same approach also to pull the directory, file size, etc.
    *************************/

    hi,
    Like you said.. steps are simple and clearly mentioned in guide.
    1. create a variable of type string
    2. after configuring the file adapter , go to corresponding receive activity , go to properties tab
    3. search for a property with name as jca.file.FileName . This basically keeps track of file name
    4. for this property, give the value as name of variable created in step 1 above
    5. Use this variable anywhere in assign / transform
    HTH,
    Ketan

  • File adapter polling and getting the file name

    I have a requirement where I have to poll a file and dump the data into the DB. But while polling a file for a particular file name, I also need to get the name of the file to do some operations on the file. The file name should be passed from the adapter in order to do some operations based on the file name. Is it possible to get the file name by any chance?

    Hi,
    its easy to get the file name..by creating the variable for the fileAdapterInboundHeader.wsdl
    just follow the below link.
    http://abhishek-soablog.blogspot.com/2008/06/bpel-getting-file-name-from-file.html
    Edited by: Oraacler on Mar 19, 2010 2:59 AM

  • SSIS and Secured FTP Commands to GET a Remote File using wildcards

    So my biggest caveat here is dealing with wildcards! For the life of me I cannot find any good examples of SSIS and scripting that uses FTP wildcards to GET certain Files. In a nutshell, here's what I need to do...
    Query a SQL Server Database which has a parsed File Name, the first 50 characters of the file name.
    The Query "Result Set" is put into an Object Variable User::SQLServerFileList
    I then utilize a "Foreach Loop Container" which reads the User::SQLServerFileList and puts it into Variable User::SQLServerFileNm...which is again the first 50 characters of the File Name
    Within the "Foreach Loop Container", I then utilize an "Expression Task" which builds a variable User::RemoteFileLookup which is a concatenation of the User::RemoteFolderPath + User::SQLServerFileNm + the wildcard *(Variable
    User::RemoteWildCard)
    I then try and utilize a "FTP Task" to use that concatenated Variable to go and GET the Filename but every time I try, it does not like what I'm sending via the "FTP Task"
    Error: 0x0 at TF Secure FTP Task, ExecuteTask Failed:: Illegal characters in path.
    I realize I might have to do something like this via C#.
    My biggest challenge is providing the GET Command via the Remote FTP Site with a parsed Filename and utilizing a wildcard.
    mc7i1231_20140227_050114_27_05_02_09*.999
    And the Filename that exists on the FTP Server is...
    mc7i1231_20140227_050114_27_05_02_09_x12_a43419452ca844a9b8a00f61e655dca3.x12-20140303180032.999
    Can any gurus out there PLEASE help me out???
    Thanks in advance for your review and am hopeful for a reply.
    PSULionRP

    Hi PSULionRP,
    According to the document
    FTP Task, we can read that:
    The FTP task supports the ? and * wildcard characters in paths. This lets the task access multiple files. However, you can use wildcard characters only in the part of the path that specifies the file name. For example, C:\MyDirectory\*.txt is a valid
    path, but C:\*\MyText.txt is not.
    So, when you use expression tobuild the variable RemoteFolderPath, make sure the evaluated value of the expression conforms to the above rule. 
    Regards,
    Mike Yin
    TechNet Community Support

  • Addition of a header line to a flat file using Custom Adapter Module?

    Is the header that you want to add to the input file always a constant?
    In that case why go for a module. Directly map the required constants during the mapping to your IDoc.
    My suggestion is to avoid the module

    Hi Shabrish,
    The Header is not a constant field always as the value changes per file adapter so a module will be helpful, and it will be a must to add the Header record as the first line.
    Can you suggest/direct me to some appropriate blogs? Thanks
    Regards,
    Nipun

  • Handling empty files Using SFTP adapter

    Hi folks,
    Can any please let me know how to handle empty file handling in SFTP adapter as a sender.
    I getting error in sxmb_moni while empty file coming in sftp adapter. Please help me on this issue.
    Thanks,
    Enivass

    Hi,
    please select option "Empty file Handling-*do not create Message*" in sender comm channel as per your requirement.
    Try this.
    Reg

Maybe you are looking for

  • How can I read the voltage from a serial port

    I am fairly new to LabView and I am having trouble figuring out how to read the DC voltage coming out of an RF Power Supply through a serial port so that I can monitor the voltage every few seconds. In order to do this do I need to purchase a DAQ car

  • My subscription payment didn't work

    Hi I need help with my subscription payments, it's been working for over a year and now suddenly it has a problem with my payment. My back account is not the problem money wise. So my question is do I start up a new subscription or wait and it will r

  • SAP BP Master data amendment to send Auto mail to customer to inform the changes

    Hi, Need advise for my requirement to send an auto mail to customer whenever any amendment is made on customer data. As i read in SAP help there are some standard workflows which will help to perform this task. Names of Standard workflows. Need urgen

  • Leopard and mobile me

    I have leopard 10.3.9 and can no longer view my .mac mail as I cannot load Safari 3 on my ibook because my software will not support it. Is there any way around this problem?

  • Synchronization cockpit problem

    Hi, I have some customers. I want to create BP master for those customer automatically. I have check all the settings of synchronization and cross-applications. But getting below error "No transfer of interval   for object BU_PARTNER Message no. NR02