FTP Bug ?
Hi,
I'm testing the authorware FTP-demo.a6p file, in the
"Quicktest" area.
I connect to my server OK
1. FtpStore copies a local file to the server and gives no
errors. However,
if the local file has a size LESS than 32KB, the copied file
has zero bytes.
2. A similar thing happens with FtpAppend. In addition, when
attempting to
append a file (rather than create a new one), an error
occurs.
Has anyone else experienced this ?
Is there a fix please ?
Thanks for your help.
Thanks Erik.
That's the sample I've been testing.
I managed to get around the problem with a POSTURL and a bit
of perl cgi
script on the server ... but I have some more things I need
to do as well.
It would be nice if I could get the FTP working.
"Erik L. **Community Expert**"
<[email protected]> wrote in
message news:gbavql$g0q$[email protected]..
> I've not used that functionality much at all, so don't
know if that's a
> bug with the .u32 or perhaps a coding issue. As I recall
from when I did
> play with it a bit, I never got the append function to
work, but may be
> because the FTP server didn't support it (was years
ago)?
>
> An alternative to try may be the sample file here:
>
http://awaretips.net/Authorware_samples.php
- the fourth sample up from
> the bottom of the list.
>
> It's not all that different from the sample I think
you're working with
> but is a bit more refined. If nothing else, it's
something to try and see
> if you can spot any differences in the results.
> HTH
> Erik
>
> Tony wrote:
>
>>
>> 1. FtpStore copies a local file to the server and
gives no errors.
>> However, if the local file has a size LESS than
32KB, the copied file has
>> zero bytes.
>>
>> 2. A similar thing happens with FtpAppend. In
addition, when attempting
>> to append a file (rather than create a new one), an
error occurs.
>
> --
> Erik Lord
>
http://www.capemedia.net
> Adobe Community Expert - eLearning
>
http://www.adobe.com/communities/experts/
>
>
http://www.awaretips.net -
Authorware Tips!
Similar Messages
-
There is a issue with Dreamweaver CS3 and ftp connections. For some reason if I leave dreamweaver open for a few hours and come back, I get an error when saving to the web server that an ftp error has occurred. There is no problem with ftp service on the server and no the users are not maxing out the connection.
The simple yet odd fix is to restart dreamweaver. The problem is that dreamweaver should not do this. If i have saved documents and open from the remote, and if the remote over rides the local, I have lost changes made to given file.
Dreamweaver's ftp bug is a problem. Having 18 specific documents open in dreamweaver, just to have to close and re open dreamweaver just to save files to a known working ftp server.
Has anyone else had this issue?Those seem like good practices.
As far as the firewall issue, I am very sure that it is not the firewall, unless its a bug with windows firewall being disabled and dreamweaver checking its status and getting confused. The windows firewall is disabled by group policy and being a local admin, I am sure of this.
Just to give a better idea of the issue.
I come in at 8, and I open dreamweaver. I open files edit them, save them, which by my settings ftp's saved files. I have no problem saving the files to the remote server.
Around 12 ish i leave for lunch and I come back to dreamweaver. Dreamweaver, is the way i left it, it has a few of the files I am working on open inside of dreamweaver. I make a change to any given file and save it, i then get the FTP error. I could try changing the "site" i am working on and connect to its ftp, just to get an FTP error. I leave dreamweaver in its current state, and i open filezilla and ftp into the same server as well as delete, rename, copy files to the ftp.
In order to resolve the connecting to ftp issue, I have to close and reopen dreamweaver. And only after doing that can i access any ftp server through dreamweaver.
If i could never get to the ftp server through dreamweaver, I would assume a firewall issue, but that is not the case. -
FTP BUG in Dreamweaver CS6 after upgrading to build 5861
I just updated Dreamweaver CS6 to 12.0.1 build 5861. Now Dreamwearver fails to put files after several successful puts of the same file. Only symptom is that the background uploader window fails to appear. Only solution is to close and re-open Dreamweaver.
Further testing seems to indicate this condition only happens if I manually save a changed file before attempting the Put. It seems to consistently work correctly if I perform the Put and wait for Dreamweaver to prompt me to save the file.
THIS IS DEFINITELY A BUG THAT SHOULD BE FIXED - Dreamweaver CS6 Perpetual license (Not Cloud)Ask in the DW forum.
Mylenium -
Hi Everyone, I am unable to ftp to GoDaddy with Muse 2014.2 no matter what settings I use, including basic FTP to my server's IP address. Is there a new Hotfix? I am running Muse on latest Yosemite. I would really like to get this working, so that I can use in browser editing with a client.
I can ftp to the same account using FileZilla or other external ftp clients like ForkLift. So the login is fine and so is ftp. When I use Muse I get the error: "Could not sign you in. Check your user name and password, and try again." If I press "resume" over and over again, with the patience of a spinal surgeon, it will finally compete.
Please help or advise if you can.Having the same issue here. Server, User Name and Password are all correct (double, triple, quadruple, quintuple checked).
Still receive the following error.
Ended up being a hosting-side error. -
I just upgraded to DW 5.5 included in my master collection, I'm connecting to FTP no problem, but I'm unable to upload to the ROOT folder only.
I can upload to any other folder, for example, images in the assets, swf in the flash folder etc.
Premission are correct, godaddy hosting upper tier support thought they fixed a rare problem on there end.
Turns out they can upload to the root folder on there end but not on mine through dreamweaver 5.5. FTP
Any else have this problem and know how to fix it? Fillezilla is my only option right now.
Big thanks.Yet another GoDaddy/DW ftp problem... Since DW works pretty well with everything BUT GoDaddy, I keep saying this is a GoDaddy problem.
They may be the biggest, but that CERTAINLY doesn't mean they're the best. -
System specs
Mac pro Early 2009 2.66 mhz 12 gigs ddr3
Osx 10.6.3
I don't know if anyone else has seen any of these issues, so i will post them in hopes that there may be a fix.
Downloaded creative suite cs5 for mac (trial)
Installed Photoshop/Dreamweaver
Testing how each work on Osx 10.6.3
Observations
1) can't always upload pages to ftp server (when clicling on file upload arrows Put and get will be grayed out) some times if I save the file before trying to upload the put/get option are available. sometimes I don't need to save the file first as the put/get option are available. And sometimes Imust click inside my page to be uploaded several time, and or save the file several times before I can get the Put/get option. I have even had to sometimes go to force quit to turn DW off and restart it to get DW working again
2) DW will not always shut down. ( when going to Dreamweaver>Quit Dreamweaver nothing will happen)
3) Copy paste of text inside of source code
I have had issues with DW not pasting a peice of code in to the page I am working on correctly. If I was to put
<hr /><br />
<p class="datatable"><strong>Want to be a host?</strong></p>
</div>
I mught see something like
<hr /><br />
< ="datatable">< g>Want to be a host?</strong></ >
This is vauge I know. I should of copied it down, but if it happens again I will add the exact code
</div>
4) when adding text from a docx I will sometime get the microsoft preferences embeded in the source code. so if I try to higliht all the new text from the docx tehn tell DW to reformat the text to one I use as a standard, DW will either only remove some of the original Docs embeding, So therefore I have to go into the code manuualy and remove all the microsoft source doe manually.
I know this is a bit, but before I decide to upgrade to cs5 I would like to know it works properly.
Just a side not
The Ftp bugs in cs4 have seemed to be taken care of( slow ftp transfer/files not being uploaded(even though dw said they were successfully uploaded even after several tries) would have to check each update to make sure ftp worked properly
Dw seems to work/open much faster.
Now I do have parallels for mac and haven't setup DW on it yet for testing, but I was hoping not to have to use two os's at once just to do my work.My keychain assess requests will not take my password that I know is correct and I have been in the fix problem for the issue and at first it had a problem and now I go in and it says there is no problem. This was since I installed CS5 suite.
I worked with someone yesterday for the ftp problem because the site management would not keep the ftp information and I had to reinsert it each time. Well, that part was fixed but I can only drag and drop the files into the remote server and the "put arrow" says there is an error. He closed the case thinking it was going to work.
Now, with another site I can't get the connection to the FTP even though I checked with the host and found out that I had all the FTP info correct.
I haven't worked with any of the other sites as yet.
Thanks! Elvi -
Since I'd moved to tiger, I'm not able to use my powerbook to update my web site. The command ftp bugs : impossible to list the content of some directory but it works fine on others. In fact it seems not to work on big directories, it's also impossible to put file file on that kind of directory...
I used to work fine with panther...
I tried third party programm but I got the same results... the server doesn't respond when I try to access some directory.
It works fine using the DOS ftp command on my PC. It's creasy.
Would should I do except from swithing to windows,... or installing panther again (but I don't know how to do that afer installing tiger without reformated my disk....)Hi,
Yes i found a solution, but it was not a nice one! My solution was to create an ABAP mapping. When the files comes to the XI i use this mapping and inside i have coded the FTP send procedure. For that i use the FTP_CONNECT and FTP_COMMAND function modules.
After the file has passed the mapping i just use af dummy Communication Channel to place the file on af arcive space.
/Jakob -
Enable group mailing list in Server.app not working
Hello everyone,
I have been trying to enable a new (?) feature of Server.app : "Enable group mailing list". Until now, it does not work for me. When I try to send an email to the group [email protected], Mail tells me that the smtp server cannot send my message. Here is what I see on the server's /var/log/mail.log file :
Sep 10 16:55:54 testserver01.pretendco.net postfix/smtpd[2311]: NOQUEUE: reject: RCPT from testclient01.pretendco.net[10.1.101.10]: 550 5.1.1 <[email protected]>: Recipient address rejected: User unknown in local recipient table; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<testclient01.pretendco.net>
Sep 10 16:55:54 testserver01.pretendco.net postfix/smtpd[2311]: disconnect from testclient01.pretendco.net[10.1.101.10]
It is interesting to note that group mailing list aren't even mentioned in the Mac OS X Server Advanced Administration Guide :
http://help.apple.com/advancedserveradmin/mac/10.8/#apd9430d30c-5796-4a20-a8f9-1 20638938942
Does any has any good/bad experience with group mailing lists under Mountain Lion Server ? Any advice ?
Thanks a lot !Hello Mark23 and thanks for your help !
The log says nothing particular when I (un)set the "Enable Group Mailing List Option". The only difference I see is a line saying mail_groups[127]: sleeping for: 1 hour(s). I have no idea what this means exactly. Googling it did not help me much either.
I post the /etc/aliases file below. Interesting : every time I (un)set the "Enable Group Mailing List" option, the /etc/aliases last access time changes. But the md5 hash of the file stays the same.
I guess that the "sudo newaliases" uses /etc/aliases to construct the binary database file /etc/aliases.db ? It seems that this script is run every time I (un)check the option since the access time of *both* /etc/aliases and /etc/aliases.db are changed to the current time.
Do you have any other option checked ?
Here is my /etc/aliases (I removed the blocks of comments at the beginning and at the end):
# Person who should get root's mail. Don't receive mail as root!
#root: you
# Basic system aliases -- these MUST be present
MAILER-DAEMON: postmaster
postmaster: root
# General redirections for pseudo accounts
bin: root
daemon: root
named: root
nobody: root
uucp: root
www: root
ftp-bugs: root
postfix: root
# Put your local aliases here.
# ==== Begin auto-generated section ========================================
# This section of the aliases file is auto-generated by server admin tools
# Please do not edit this section or your modifications will be lost
# === End auto-generated section ===========================================
# Well-known aliases
manager: root
dumper: root
operator: root
abuse: postmaster
# trap decode to catch security attacks
decode: root -
Mailman + Postfix + Virtual Domains
I'm going nuts trying to get this thing working... I spent the best part of yesterday getting Postfix and Courier working with Virtual Domains and a PostgreSQL backend. That's all working fine.
Now I've spent about the last 5 - 6 hours trying to get Mailman working -- obviously without any luck.
Can someone point me in the right direction? I tried installing from source, and following the 'official' installation manual, but that doesn't cover Virtual Domains very well (obviously not well enough to get it working at least).
*Then* I realized that their's a package in EXTRA for Mailman, so I wiped the source install I did, and installed the package, but I'm still stuck.
I think the main part of my problem, is the manual says that I should have a 'data/virtual-mailman' in the mailman installation directory, but I don't, and can't find any information on how it is created!
At the end of the day, I just need a single damn mail list on one of my virtual domains for a dozen people -- if anyone has an easier solution than this, please suggest!windowbreaker wrote:
Also, what's the output of
postconf virtual_maps virtual_alias_maps
Let me be sure I understand your situation. You currently have postfix setup with virtual domains and mysql. You are successfully able to send/receive emails from your virtual accounts, correct?
Correct.
postconf: warning: virtual_maps: unknown parameter
virtual_alias_maps = hash:/etc/postfix/virtual_alias, pgsql:/etc/postfix/pgsql-virtual-forwards.cf
And the contents of /etc/postfix/pgsql-virtual-forwards.cf
hosts = localhost
user = postfix
password = MY_PASSWORD
dbname = db_postfix
query = SELECT forward_to FROM aliases WHERE email = '%s'
/etc/postfix/virtual_alias
MAILER-DAEMON: postmaster
postmaster: root
bin: root
daemon: root
named: root
nobody: root
uucp: root
www: root
ftp-bugs: root
postfix: root
manager: root
dumper: root
operator: root
abuse: postmaster
decode: root
root: [email protected]
windowbreaker wrote:In that case, you're probably trying to have postfix process all email sent to, say, [email protected], by mailman. In which case you need to pass that email message to a mailman command, right? I'm sure I got some things wrong, so go ahead and clear them up so I can give you detailed advice.
Correct. My domain in question is ryla9810.org which has one alias that forwards to my gmail account (phil@), and I need one mail list with a dozen members (team@). The forward works, but the maillist is causing me grief
Thanks for all your input so far -
Mailman / Postfix aliases problem?
Hello, all!
I've got mailman running, finally, after many hours of fighting with it. It is now to the point where it will accept new subscribers through the listinfo page, send them their confirmation, and accept a confirmation action by the user on the html page to do so. The list currently only has 2 members - the moderator and one test email account. The server is hosting many virtual domains. The list in question is in one; it is currently the only virt-domain that is using a mailman list.
However...
Attempts to send from the moderator to the list result in the following:
<[email protected]>: host
/var/imap/socket/lmtp[/var/imap/socket/lmtp] said: 550-Mailbox unknown.
Either there is no mailbox associated with this 550-name or you do not have
authorization to see it. 550 5.1.1 User unknown (in reply to RCPT TO
command)
OK, so it seems to me that Postfix is not correctly figuring out that the listname is not a hosted mailbox, but is indeed a list name, and thus never bothers to send it off to mailman. I'm guessing this means I'm missing 1 little thing or other in postfix's main.cf but I can't figure out what. Help?
here is my main.cf:
smtpdtls_keyfile =
myhostname = my.fqdnname.com
mailbox_transport = cyrus
enableserveroptions = yes
mydomain = sysop.com
messagesizelimit = 104857600
spam_enabled = yes
virtual_transport = lmtp:unix:/var/imap/socket/lmtp
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
smtp_principal = smtp/[email protected]
virusdb_lastupdate = 2006-01-05 14:54:45 -0600
mynetworks = 127.0.0.0/8,MY.CLASS.C.0/24
mydestination = $myhostname,localhost.$mydomain,localhost,my.fqdnname.com
smtpdsasl_authenable = yes
smtpduse_pwserver = yes
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdpw_server_securityoptions = plain,login,cram-md5
content_filter = smtp-amavis:[127.0.0.1]:10024
ownerrequestspecial = no
recipient_delimiter = +
smtpdhelorequired=yes
disablevrfycommand=yes
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
Any help would be appreciated. I've Googled my eyes out and keep not finding what I need.windowbreaker wrote:
Also, what's the output of
postconf virtual_maps virtual_alias_maps
Let me be sure I understand your situation. You currently have postfix setup with virtual domains and mysql. You are successfully able to send/receive emails from your virtual accounts, correct?
Correct.
postconf: warning: virtual_maps: unknown parameter
virtual_alias_maps = hash:/etc/postfix/virtual_alias, pgsql:/etc/postfix/pgsql-virtual-forwards.cf
And the contents of /etc/postfix/pgsql-virtual-forwards.cf
hosts = localhost
user = postfix
password = MY_PASSWORD
dbname = db_postfix
query = SELECT forward_to FROM aliases WHERE email = '%s'
/etc/postfix/virtual_alias
MAILER-DAEMON: postmaster
postmaster: root
bin: root
daemon: root
named: root
nobody: root
uucp: root
www: root
ftp-bugs: root
postfix: root
manager: root
dumper: root
operator: root
abuse: postmaster
decode: root
root: [email protected]
windowbreaker wrote:In that case, you're probably trying to have postfix process all email sent to, say, [email protected], by mailman. In which case you need to pass that email message to a mailman command, right? I'm sure I got some things wrong, so go ahead and clear them up so I can give you detailed advice.
Correct. My domain in question is ryla9810.org which has one alias that forwards to my gmail account (phil@), and I need one mail list with a dozen members (team@). The forward works, but the maillist is causing me grief
Thanks for all your input so far -
Email to 'hidden' accounts - what addresses are they and where does it go?
Is there a list of hidden email accounts?
I found a new one yesterday, 'uucp', and cannot find where it goes...
Any ideas?
Thanks
BPwell to partly answer my own question, from the postfix aliases file:
bin
daemon
named
nobody
uucp
www
ftp-bugs
postfix
postmaster
all these seem to goto root, which is where?
then mailer-daemon goes to postmaster, which is also effecively root? -
I have a FTP server that supports encrypted sessions. When I approach this server from the internal network, encryption works fine. However, when I approach the server from outside only non-encrypted sessions work. With the FileZilla FTP client I get the following error when I try an encrypted session:
"GnuTLS error -9: A TLS packet with unexpected length was received."
Now, when I use the router of my ISP (instead of the Airport Extreme), encrypted sessions from outside work fine.
So this makes me believe there is a bug in the Airport Extreme. This 4y old blog posting suggests that as well:
http://fetchsoftworks.com/fetch/news/ftp-with-tlsssl-ftps-and-the-new-airport-ex treme-base-station
but it also says it has been fixed in version 7.2.1. Perhaps the bug reappeared?Granted, the same problem. Firmware 7.5.2, everything works except FTP.Tak alsotried firmware 7.5.1, the problem remained. And for some reason, I will not let meand just to FTP without encryption.
ps long thought AE rebuilt poor server times 4
I apologize for the mistake, I do not speak English, use translate.google -
I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.
Hi Jaap,
Are you sure about your FTP credentials (FTP folder and site URL) that you are using for the upload? Are you able to see the updated files in the remote directory of the FTP server, after you finish uploading the muse file, using an external FTP client like FileZilla?
Thanks
-Prashanth -
I have been having trouble with my ftp. I have my site set up to automatically upload the files on save. When I do that and when I select "Put" Dreamweaver shows it's uploading files but when I refresh my page, there is no change. Is there a bug and a fix for this bug? Does cs6 have these issues?
Hello,
I am going to look into this behavior. What version of LabVIEW are you using?
Regards,
Patricia B.
National Instruments
Applications Engineer -
Another bug: FTP Upload causing broken link?
hi, i have a file that has multiple parent(created using create link option).
When i update the file via WCP in drive O:,
changes to this file was reflected to other parent, which was correct, ofcourse.
But when i try to update the file via FTP,
only file in the corresponding/current folder was updated,
and link to other folders was gone,
and other parent folders still refering to the old file.
is this a bug? has anybody else notice this problem?
I also noticed inconsistent behaviour between deleting files via WCP and via FTP.
when i deleted files via FTP, it seems that the file was completely freed, removing the file from current folder and from all other related/linked folder.
but when i use WCP to delete file, it only delete file from current folder, and the same file in other related folder is still preserved.
another bug?
btw i'm using IFS 9.0.1,Windows 20001. Updating documents with multiple parents.
The behaivor you describe is expected. Here is why.
WCP updates the content of the document using RACI while
FTP put creates a new document, replacing the existing document, and thus
the link to other parents do not exist for the new document, and the other
parents still point to the old document.
One way around this problem is to have the folder containing the
document have the multiparents, instead of the document itself. This
would maintain the links if the docment content is changed or if the document
is replaced.
2. Deleting documents with multiple parents
This does apear to be a bug. The correct behaiver is to only delete the
file from current folder, and the same file in other related folders
is still preserved.
This is fixed in the next iFS release 9.0.3 for FTP.
hope this helps!
Bob
Maybe you are looking for
-
How can I set default values for Allocate Mode in AO config?
Hi, How can I set default values for allocate mode in AO config. To be specific, in the attached vi, I need to set the Allocate Mode in AO Config to 'Use FIFO Memory (6)' if the value inside my case structure is false and to 'no change (0)' if the va
-
Do Apple stores do Year 10 work experience?
I wanted to know whether Apple stores do Year 10 work experience in the UK, I've asked in a lot of places but I haven't gotten a straight answer. (Sorry if this is posted in the wrong area)
-
why cant i connect to wifi since i started to download ios7. I cant pair my bluetooth in my auto and I cant hook up to wifi on my iphone
-
Listening to streaming/online radio stations?
Hi there! Is anyone here who manages to listen to MP3 streaming radio stations? shoutcast.com requires flash, so it does not work with my slide 3600.... The *.pls playlists from mobtuner.com are not recognized by my phone, though the 3600 slide coul
-
hi there, I am trying to increase the parameter open_cursors for the database, initially it was 100 and now i made it to 500, but now when i try to start the database it gives me error post initialization failed. I feel i need to set some OS paramete