FTP problem. causing incorrect data transfer ?

I am trying to upload a php page the sends data to a hosted payment page. The payment centre who in this case is Barclaycard are saying when they test the page in there environment (that i emailed them) is sends all the correct data to their hosted payment page. When i try to upload the page to their servers using dreamweaver cs 5.5 it doesnt work and part of the data is incorrect and therefor shows errors and not the correct information on the payment page.
is there any truth in this and should i be trying another FTP method or scripting?
thanks

the payment centre found out i couldnt use a £ sign...their issue

Similar Messages

  • SSAS Default Member Causing incorrect data in Excel Pivot Table using Multi-select in filter

    I have an Excel 2013 pivot table connected to an SSAS (2012) cube. One of my dimensions has a default member specified. When I drop this dimension in the filter area of my pivot table and select multiple members including the default member then
    only data for the default member is shown. Selecting multiple members where the default member is not included does not result in an issue.
    I believe this may be in an issue in how Excel builds the MDX but wanted to see if there are any work arounds.
    This issue can be recreated using AdvetureWorks using the following steps:
    Alter the Product Dimension of the SSAS Default Member by setting the default member of the Product Line Attribute to Mountain: [Product].[Product Line]&[M] 
    Process the cube
    Connect to the cube via Excel 2013
    Drag internet gross profit to the Values area (The value will be 4700437.22 which reflects the Mountain default filter)
    Drag Product Model Lines to the Filters area (you will see Mountain selected by default)
    Change the filter by checking the Select Multiple Items checkbox and checking Mountain and Road (You will see that the amount does not change)
    Change the filter again by selecting Road only (to demonstrate that Road has a value, 5602105.8, associated with it)
    Change the filter again to select Road and Touring (to demonstrate that the correct aggregation of the two selected members is preformed)

    Hi Hirmando,
    According to your description, the default member cause incorrect data when dragging a attribute that contain a default member to the FILTERS area, right?
    I can reproduce this issue on my environment, when dropping this dimension in the filter area of my pivot table and select multiple members including the default member then only data for the default member is shown. Currently, it's hard to say the root
    reason that cause this issue. In order to narrow down this issue, please apply the latest server pack and cumulative update.
    Besides, you can submit a feedback at
    http://connect.microsoft.com/SQLServer/Feedback So that microsoft will confirm if this is a know issue.
    Regards,
    Charlie Liao
    If you have any feedback on our support, please click
    here.
    Charlie Liao
    TechNet Community Support

  • Problems when creating data transfer process for  0EC_CPLAN (Compensation )

    Hi experts,
    I have the infoobject 0EC_CPLAN (Compensation Plan) Active in my BW sistem.
    I tri to create data transfer process for text and atributtes for it, but when i do this i get a "Target 0EC_CPLAN (Type IOBJA) is not active" error message.
    When i double-click on the texts or attributes i recive an  "Administration function is not possible for this InfoObject" information message and i can not active or edit it.
    What could this be? I am breaking my brain.
    Thank you all!

    Debugging i have seen this:
    15         CALL FUNCTION 'RSD_IOBJ_GET'
    16           EXPORTING
    17             i_iobjnm         = l_iobjnm
    18             i_objvers        = rs_c_objvers-active
    19             i_bypass_buffer  = rs_c_false
    20           IMPORTING
    21             e_s_vcha         = l_s_vcha
    22           EXCEPTIONS
    23             iobj_not_found   = 1
    24             illegal_input    = 2
    25             bct_comp_invalid = 3
    26             OTHERS           = 4.
    27         IF sy-subrc <> 0 OR l_s_vcha-infoarea IS INITIAL.
    28           MESSAGE i025(rsawbn).
    l_s_vcha-infoarea is Initial.
    Dues this mean that the object has no-infoarea??? In infoprovider i is under "enterprise compensation management" Does it give you a clue?
    Thanks!

  • Linked Server Problem while SQL Data Transfer using Non-sys Admin Account

    Hi Team,
    I've an issue while transferring the data from ServerA to ServerB. I've made the ServerB as "Linked Server" to Server A. Pre requisite like:
    1) SQL Account is been created on ServerB.
    2) Timeout settings for remote connections is set to "No Timeout".
    When I execute the below script using Query Window, It executes successfully:
    Insert into ServerB.DBName.dbo.TableName1
    Select * from dbo.TableName1
    But when I execute the same step by creating a SQL Job, it fails with the below error message:
    Message
    Executed as user: DomainName\UserName. Named Pipes Provider: Could not open a connection to SQL Server [1450]. [SQLSTATE 42000] (Error 1450)  OLE DB provider "SQLNCLI" for linked server "ServerB" returned message "Login
    timeout expired". [SQLSTATE 01000] (Error 7412)  OLE DB provider "SQLNCLI" for linked server "ServerB" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005,
    this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". [SQLSTATE 01000] (Error 7412).  The step failed.
    Could you please help me in fixing the above error message and I can transfer the SQL Data between 2 Servers.
    Thank You
    Sridhar D Naik

    Sridhar,
    Is this still an issue?
    Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • File Sharing Problem and slow data transfer

    Hi,
    i just receive my MBP a few weeks ago and i wanted to transfer some data with a friend who has a MacBook. I tried to share a folder and it cold not be seen by the MB as guest login. i checked the permission when i add the folder to the file sharing as read only. Second problem i had is more intriguing...finally a i decide to log in as Me with the MB, and then i saw my folder shared. he copy the stuff he need it with an acceptable speed. He shared a folder to me the same way i tried and it works!! but the more frustrating was to see how slow was the transfer from the MB to my MBP. Can find any explication...any suggestion???? please !!

    slowness of wireless transfer speeds could have something to do with your access point/wireless router.... if you have bad bars on your airport card then try moving closer to the signal.
    also what is that total size of the files you are trying to move to each laptop?
    i remember when i transferred a fair amount of MP3's it did take a little bit of time....

  • Problem's in data transfer  to target components in SAP PS - CATS

    Hi all
    I am trying to transfer data from CATS to PS and CO for month end closing .
    I have checked the budget in planned/actual/assigned report, and the
    WBS has sufficient budget.
    T-code used is CATA, and we are using a varient, and while transfering the data
    we are mentioning the cost center instead of employee number.
    The following message is displayed which is show in the attachement.
    Can  any body please let me know solution for this.
    What is difference between "Budget exceeded" and "Budget almost exhausted" ?
    How to check the error in the document ?

    "What is difference between "Budget exceeded" and "Budget almost exhausted" ?"
    The tolerance limits have been configured in such a way that when the budget reaches a certain percentage system will pop errors as you are seeing. For e.g. In your case the system might be issuing the message "Budget Exceeded" when 100% of the defined budget is reached. Similarly, system is issuing  the message "Budget almost exhausted" when 90% of the defined budget is reached. Budget almost exhausted message will still allow you to go ahead with the transfer provided you first correct the error in the document.
    "How to check the error in the document ?"
    Try to double click on the error message. That should take you to the details of the error.
    Why are you using the cost center instead of the Personnel number in order to transfer the hours? General practice is to use the personnel number.
    Check tcodes CN30,  COFC and see if you can get to the details of the error.

  • Idle socket causing delayed data transfer

    I have a telnet type client written that has a thread to continually read data from the socket with the server. The problem is, that when the connection is idle for a significant amount of time (no data transfered), the connection enters "delay state" (that's what I'll call it). In this state, if data were to begin transferring again, nothing is read from the InputStream until a while later (minutes).
    From my observations, I believe the delay time reduces if more data is queued up.
    Here is my thread code:
              public void run() {     
                   inputField.requestFocusInWindow();
                   if(!init()) return;
                   byte[] buff=new byte[buf_size];
                   int nch;
                   thread:while(this==Thread.currentThread()) {
                        try {
                             if ((nch = in.read(buff, 0, buff.length)) == -1) {
                                  addMessage("Natural disconnection from host.");
                                  disconnect();
                                  break thread;
                             outputArea.append(buff,nch);
                        } catch(Exception e) {
                             if(e instanceof IOException)
                                  addMessage("Forcibly disconnected from host.");
                             else if(e instanceof DataFormatException)
                                  addMessage("Fatal error - data corrupted. Disconnecting.");
                             else  //else I don't know what happened, so print the raw data
                                  addMessage(e.toString());
                             disconnect();
                             break thread;
              }You'll notice a lot of references to my own methods. I think their naming is fairly self explanatory, but if you need clarification, feel free to ask.
    Message was edited by:
    natmaster

    With ejp's pedigree on this forum, i think he understands threads!
    <p>I think you've misinterpreted that tutorial. In the tutorial i found this code:
    <p>
    public void run() {<br>
    ��Thread myThread = Thread.currentThread();<br>
    ��while (clockThread == myThread) {<br>
    ����repaint();<br>
    ����try {<br>
    ������Thread.sleep(1000);<br>
    ����} catch (InterruptedException e) {<br>
    ������//The VM doesn't want us to sleep anymore,<br>
    ������//so get back to work.<br>
    ����}<br>
    ��}<br>
    <p>which i presume you're referring to, but that only works because the code is run from an applet with a stop method that sets clockThread to null. It's nothing to do with fairness of executing threads.
    <p>Think about which thread is executing the statement "this == Thread.currentThread". Unless you're calling this run method from yet another unspecified thread, it's going to be "this", and if "this" is having a chance to execute any statements at all, then it's also going to be the current thread, so that statement will always be true.
    <p>If you want to be sure to be nice to other threads, you could call Thread.yield(). I never had much joy with using this method though, and the current JVMs seem to be pretty good at being fair to all threads even if none of them sleep or yield at all
    <p>
    [Sorry about formatting, damned forum seems to be shagged to tried to do it manually with html tags]

  • Cs3 Indesign problem - Pulling incorrect data from an .xlsm file.. please help

    Hello,
    I am hoping someone can provide me some answers here, as this problem has stumped me for a couple of days now.
    I am using Adobe Indesign Cs3 - and I have been pulling excel tables into the .indd file with no problem. However, I had to upragde my version of 2003 excel, to the newer 2007 version, which inlcluded having to update the base excel files to .xlsm from their previous .xls versions.
    I did not change anything else with the files.. simply used 'save as' to update the files.
    After the upgrade, I relinked all instances of tables for the .indd file, and all seemed to be fine. Except when I look at anything that was pulled in as a date, is now pulling in 4 years and one day behind what it is written as in the .xlsm file it is being pulled from.
    It doesnt make any sense to me how Indesign can be pulling in figures differently than how they are written in the Excel file it is pulling the data from.
    Hopefully this makes sense, and someone will be able to help me here
    Thanks
    J

    Aye.. the reason I have had to upgrade the excel files is because of the column limit in the .xls format. 2003 excel files will only allow columns up until the IV limit.. and my data now goes past that.
    Since Indesign seems to have a huge problem trying to draw excel data/tables from anything other than 1 worksheet in an excel file, Ive had to try and create an .xlsx or .xlsm file to give me the extra columns I need for my data.
    As for changing my source files.. that would be fine. Ive tried a few things with the dates, but nothing I've tried has worked so far. It reeks of a 1904 date system problem, becuase of the exact 4 years and one day off that indesign is pulling in (if you are familar with the 1904 date setting in excel, you will undertsand what Im saying) but why indesign is pulling in different data than what is visible in the source file is beyond me.
    Example, the source file has a date: July 15, 2010. Indesign is pulling in July 14, 2006.
    It is really bizzare.

  • Problems with DDE data transfer in a table

    I am having a problem on my client machine that is not occurring on my server machine. I have a table which is 22 x ~110 and on my server machine all signals for all 22 rows come through fine. On the other hand, on my client machine the same table loses all signals after row 17, i.e., rows 18-22 do not display any data. These two tables are dde linked. I changed rows 18-22 to rows 1-5 and moved every other row forward thinking the problem was within the original last 5 rows, but the result was the same - no data in rows
    18-22. I'm really stumped on this one - any suggestions would be appreciated. I am running Lookout 3.8, build 16 with Windows 98.
    Jason Phillips

    Try adding a delay for dde tables in your lookout.ini file.

  • Got Problem in Applet data transfer

    Hello, I got a problem when building my java applet by using swing.
    I need to copy to some text from the JTextArea in my GUI, but it was rejected,
    and when i try to use some method of TextComponent, like TextArea.copy(),
    which is available in Java Application, it will show the exception in DOS(shown in the end).This project is urgent to me, can U tell me whether it has or what is the solution for it? thank you very much.
    Exception occurred during event dispatching:
    java.security.AccessControlException: access denied (java.awt.AWTPermission acce
    ssClipboard)
    at java.security.AccessControlContext.checkPermission(AccessControlConte
    xt.java:272)
    at java.security.AccessController.checkPermission(AccessController.java:
    399)
    at java.lang.SecurityManager.checkPermission(SecurityManager.java:545)
    at java.lang.SecurityManager.checkSystemClipboardAccess(SecurityManager.
    java:1375)
    at sun.awt.windows.WToolkit.getSystemClipboard(WToolkit.java:573)
    at javax.swing.text.JTextComponent.cut(JTextComponent.java:1249)
    at UI24AT.actionPerformed(UI24AT.java:3374)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:14
    50)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Abstra
    ctButton.java:1504)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel
    .java:378)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:250
    at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonL
    istener.java:216)
    at java.awt.Component.processMouseEvent(Component.java:3717)
    at java.awt.Component.processEvent(Component.java:3546)
    at java.awt.Container.processEvent(Container.java:1167)
    at java.awt.Component.dispatchEventImpl(Component.java:2595)
    at java.awt.Container.dispatchEventImpl(Container.java:1216)
    at java.awt.Component.dispatchEvent(Component.java:2499)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:2458
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:2223)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:2132)
    at java.awt.Container.dispatchEventImpl(Container.java:1203)
    at java.awt.Window.dispatchEventImpl(Window.java:918)
    at java.awt.Component.dispatchEvent(Component.java:2499)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:336)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
    read.java:134)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
    ad.java:101)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:96)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:88)

    When you are running in an applet, access to the windows clipboard is restricted (otherwise an applet could take the contents of the clipboard and send them back to it's server over the internet, potentially leaking important business information from your pc).
    Why do you need to copy the text? If you want to just place the text into some other area of your GUI then I suggest you use TextArea.GetText()

  • Problem while creating data transfer process

    Hi friends
    I am using BI 7.0 version.
    I m getting a problem while creating dtp
    After activating DTP and selecting the execute button, I am getting the following error message:
    Request cannot be processed in its current state
    Messg no : RSBK209
    can anyone help me on this problem
    Thank

    Hi Deepthi,
    Also check the error message(long text) and paste it here...
    check if you are either creating a "second" Delta DTP ( if an existing Delta DTP exists, then system will not allow you create a second DTP) and will throw an "overlapping" error
    Hope this helps
    Thanks
    Kalyan

  • FTP problems cause computer freeze

    Hello,
    When I am using Dreamweaver CS3, if for some reason while
    uploading files over FTP, if the connection times out, sometimes
    the whole computer freezes. I can't even move the mouse. Does
    anyone have any ideas why this happens?
    Thanks

    If you are running from a router, you do not need a firewall.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "goliver84" <[email protected]> wrote in
    message
    news:fumo13$gj6$[email protected]..
    > That was it....when I disabled windows firewall
    everything workes fine.
    > Why is
    > that? Dreamweaver is in the list of exceptions allowed
    by the firewall.
    > How can
    > I keep the firewall enabled and still do FTP transfers?
    >

  • N95 8Gb USB Data Transfer Mode not working

    I have a bizarre problem with USB Data transfer.
    a) I upgraded to the new 15.x firmware with the correct HKCSL package - 0557980
    b) I connected PC #1 in data transfer mode with no issue and copied a bunch of installers onto the mass memory and went on to install them - to the PHONE memory.
    c) Later in the day, connected PC #2 and did the same with the last few applications.
    d) Next day tried to connect PC #1 and it didn't work
    e) Thought I must have an application using the MASS storage but checked and not so - all apps on Phone memory.
    f) Went to PC #2 and tried - Data transfer mode works - no problem.
    g) Tried PC #1 again, and still not working. I get all the right messages (Mass storage cannot be used at this time etc) on the handset, and I get the "safely remove hardware" option appearing on the PC - but I don't get a drive letter assigned in the Windows Explorer.
    h) I have tried it on PC #3 and this works as well - no problem.
    1. The working PC's both have PC Suite 2-Beta installed, while the problem PC has no PC suite at all.
    2. I have downloaded the Nokia-connectivity_cable_driver_rel_6_85_10_0 and it installs properly - giving all the expected wireless... options in Device Manager, but I still don't get a drive letter assigned with the basic data transfer mode on this problem PC #1
    So the issue seems to be with a PC that has never seen any version of PC suite, but it worked straight after the firmware upgrade.
    All PC's are XP SP2.
    Any suggestions on anything else to try ?
    Regards

    SOLVED by:
    - attaching N95, selecting USB Data Transfer Mode
    - Going to Device Manager
    - Selecting the USB Mass Storage Device for N95
    - "Uninstall"
    - Remove cable when N95 says its safe to
    - Re-attach cable
    The PC then re-discovered and reloaded the drivers including the mass storage which then worked normally.
    No idea what messed it up in the first place though.

  • Crash in data transfer process, exception cx_rs_step_failed_callstack

    Hi,
    I am having problems with a data transfer process, i am getting the message:
    Extraction datasource Z_WMS_VRM
       Prepare for extraction
       Exceptions in Substep: Extraction Completed
       Processing terminated
    When I click the button behind "Exceptions in Substep" it jumps to a line  with
    CALL METHOD cl_rsbm_log_step=>raise_step_failed_callstack
    in method IF_RSBK_CMD_X~GET_DATAPACKAGE.
    When I look in the PSA(13 records) it all looks ok, no weird values. De infopackage runs ok and fills the PSA. Screenshot of PSA contents: http://i44.tinypic.com/sesqw2.jpg
    The datasource is an external DS filled by powerexchange 4.
    The system's current support pack is 18.
    Edited by: Thijs de Jong on Jun 23, 2009 12:00 PM
    Edited by: Thijs de Jong on Jun 23, 2009 12:11 PM

    Hello Thijs,
    The same issue happened to me this week. This can happen for several reasons:
    - Some parts of the loading line is not active, resp. structures were changed and need to be activated again.
    - There is no more tablespace in the DB.
    - There is a deadlock when reading a table (maybe the table is too big...)
    Hope this helps.
    Cheers,
    Stephan

  • Error in KEFC transaction - External Data Transfer

    I am getting this error while using external data transfer function using KEFC.
    Plan version is not supported -> check your entry
    Message no. KG 029
    Diagnosis
    Plan version"xx" has not been created in operating concern"xxxx"
    Procedure
    Transfer version"xx" to operating concern"xxxx" and maintain the attributes for that version.
    I have checked plan version settings. It has been created for operating concern as well. I am not sure how to resolve this. Any suggestion or help would be appreciated.

    Hi AP,
      Please check whether you defined a constant value for characteristic VERSI (Version) in the transfer rules for your sender structure. If you don't want to define a constant value there you have to assign a field from your external structure and fill the version in your external file. In this case please consider to fill the field in the following format '1  ' for version 1 (don't use '001').
      Please refer and implement note 576807 in your system if it is in your system . Also refer note  508273 for a possible list of problems in external data transfer.
    Best Regards,
    Abhisek

Maybe you are looking for