FTP quit working?

Haven't updated the websites in awhile, the cyberduck ftp quit connecting a couple months back. all mac connections no longer connect on the mac leopard OS drive. works ok using parrallels, but don't want to play windows all day.
Can't figure out why its not working any more. Please help.
note: I have 3 different OS's on my my macpro (lots of hard drives). Leopard (using all of the time), snow leopard-never use, Lion-installed, didn't like it, but ftp does work with Lion. I do not beleive ftp has worked on the Leopard drive since lion install. that might be a clue or an obfuscation.

Hmmm, so we don't have any idea at what point the Mac side fails?
Might open Network Utility & use the Ping, Lookup, & traceroute tabs to see if we can gleen any clues...
--- ftp://***.********.net ping statistics ---
10 packets transmitted, 10 packets received, 0% packet loss
traceroute to ftp://***.********.net (69.215.95.332), 64 hops max, 40 byte packets
1  10.0.1.1 (10.0.1.1)  2.467 ms  1.355 ms  1.232 ms
2  192.168.15.1 (192.168.15.1)  2.517 ms  2.113 ms  1.837 ms
3  * * *
4  10.41.164.209 (10.41.164.209)  52.867 ms  65.822 ms  64.899 ms
5  64.13.115.205 (64.13.115.205)  69.921 ms  71.155 ms  59.897 ms
Lookup has started ...
ftp://***.********.net. 0 IN A          69.215.95.332

Similar Messages

  • Speakers have quit working no sound and it says they are working fine

    Speakers have quit working no sound and it says they are working fine

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55036.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • FTP not working. HELP

    I just upgraded to Lion. I cannot for the life of me get FileZilla or any other FTP program to connect to my webserver. I tried the launch ftp.plist technique. It does not work for me. Help.

    I fixed the problem.
    I re installed all of Lion.
    I am not sure what happened. I had a straightforward download from the App store and install (over Snow Leopard). But quite honestly, OS X lion was not exactly perfect, it was good but had some slight hiccups. The FTP issue wouldn't even connect. I figured something really screwed up on the inside and I redownloaded the whole os x using the "hold option" technique. Inside the file, you will find the dmg. Using the disk utility, burn the dmg. Of course, everything must be backed up. Restarted and booted from the disk while holding C. Formatted the harddrive witht he disk utility. and ....... a MUCH MUCH better OS X lion. The FTP also worked flawless.
    It is much faster. Also, I enabled TRIM via terminal. You can't the snowleopard Trim Enabler I heard it could cause some trouble.
    I would recommend that those who want lion should install a fresh copy. It's much faster, snappier, STABLE, and consistent. All my software issues are gone. Parallels 12090 works great. I didn't have to get 12094.
    Anyways, in summary, if anyone has any ftp client issues, reinstall Lion because the install screwed up.

  • 27: iMac Apple Mini DisplayPort to DVI adapter quits working post-firmware

    I iMac Apple Mini DisplayPort to DVI adapter suddenly quit working after I installed Apple's latest iMac display firmware update. This is an Intel Core i5; the monitor is an LG Flatron 24" Wide, and when it powers up it says "no video input" and goes into power-saving mode. No amount of replugging cables helps, but the monitor works fine on other computers.
    The Displays control panel just shows one monitor, and clicking Detect Displays does nothing.
    I suspect Apple's Display Firmware Update. My installer log shows the following, but the problem only happened today after the latest update:
    6/1/10 9:45 AM 27-inch iMac EFI Firmware Update 1.0
    6/1/10 9:45 AM 27-inch iMac Display Update 1.0
    6/4/10 11:47 AM 27-inch iMac SMC Firmware Update 1.0
    6/4/10 11:47 AM 27-inch iMac Display Update 1.0
    6/5/10 7:29 AM 27-inch iMac Display Update 1.0
    I have automatic updates disabled, but after each update I would see more firmware updates ready, but caution leads me to never install more than one of these at a time, and then to wait a while to see if anything bad happens. The odd thing is that the Display Update 1.0 seems to have been installed three times in this course of events. Alas, there appears to be no way to uninstall a firmware update.
    Here is the System Profiler Graphics/Displays output:
    Chipset Model: ATI Radeon HD 4850
    Type: GPU
    Bus: PCIe
    PCIe Lane Width: x16
    VRAM (Total): 512 MB
    Vendor: ATI (0x1002)
    Device ID: 0x944a
    Revision ID: 0x0000
    ROM Revision: 113-B9110C-425
    EFI Driver Version: 01.00.383
    Displays:
    iMac:
    Resolution: 2560 x 1440
    Pixel Depth: 32-Bit Color (ARGB8888)
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Built-In: Yes
    Connection Type: DisplayPort
    Display Connector:
    Status: No Display Connected
    It says the Mac sees no display connected, and the display gets no video signal. Since the adapter is an active device (it has powered electronics to convert DisplayPort signals to DVI signals) I suppose it could have just coincidentally died. But that seems unlikely given that the thing worked perfectly just before the last firmware update.
    Does anybody have similar experience, or better yet, a fix?

    Unfortunately the Apple Knowledge Base does not give much information about this update. Such has how to tell if it has been successfully installed. I suspect that because it keeps recurring in the install log that it has not been installed successfully as yet. Are you receiving this update through Software Update? Can you locate the installer for this update? It maybe located in Apps/Utilities.
    Some firmware update installations can be interrupted/corrupted by attached devices. If you find the update's installer on your iMac, I suggest that you detach all external devices from the iMac, use an Apple USB keyboard & mouse if available, follow the instructions carefully and install the update manually. If you do not locate the installer I suggest downloading manually from the link below and installing it.
    The Knowledge Base article mentions that your iMac should also have a Graphics Firmware Update. I suggest that you download and install that as well.
    27-inch iMac Display Firmware Update 1.0
    http://support.apple.com/kb/DL998
    27-inch iMac Graphics Firmware Update 1.0
    http://support.apple.com/kb/DL984
    Dah•veed

  • Updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

    updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

    I use a  windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor..  I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run.  The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
    What does you system configuration?

  • Email from within iPhoto '08 (7.1.1) quit working

    I am running Leopard (10.5.1) and iPhoto '08 (7.1.1) on a 2.4ghz 17" MBP. Whenever I try to email a photo from within iPhoto it pops up a window to let me choose size & options, I hit the Compose button, it will then popup a window saying that it is Preparing photos for email... then that window just goes away and it never creates the new email. I see this same behavior regardless of whether or not Mail is already open and regardless of what photo I am trying to email. This was working fine in the past... believe that it quit working after the upgrade to 10.5.1 (but not absolutely positive of that)... Any troubleshooting ideas would be greatly appreciated as I use this feature quite often.
    Cheers!
    Kirk

    Kirk:
    Try deleting the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. Next, if needed, download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • My Bluetooth USB wireless transmitter for my portable speakers has quit working.  Preferences says, "The selected device has no output controls", it used to work just fine.  Can anybody help?

    My Bluetooth USB wireless transmitter for my portable BT speakers has quit working.  Preferences says, "The selected device has no output controls", it used to work just fine.  The internal and a pair of wired external speakers work fine.  Can anybody help?

    Just tested something and it worked.
    If I put the headphones all the way in, the mac recognizes it as a digital output.
    But if i don't put it all the way in, it recognizes it as headphones and works perfectly.
    It's probably this crappy headphones.
    If anyone has the same problem, try this out.

  • Every time I open Firefox or open a page in a new tab, I get the error message that a script on this page is not responding or has quit working. This has only happened since I upgraded to 5.0.

    Even when I start firefox I have to sit here and wait for it to tell me a script on this page is not responding or has quit working. Once that happens which takes a while, I can say stop script and it moves on. I've always liked using firefox and have never had a problem in the past, however if I can't get this particular problem fixed, and I've tried many ways to do this, I may have to change to another browser. I would hope that you could find out why this is happening to me before I make that decision. One other thing, I am using the dreaded Vista OS.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Have been using firefox for months; now has quit working properly with the websites I use everyday. What happened?

    It has quit working with "liverez" which is my web based reservation program. The place I login is https://reservations.liverez.com/login.asp?LogOff=True&Return=Res but once I login, the site does not work as it did before. The website that corresponds with this doesn't look right now either. I can't even use my msn email account with firefox now. I have had to go back to using internet explorer. I have not even tried other sites with foxfire at this time. The other sites I use for work. Things that aren't working are that I can't click on things I need to click on, drop downs aren't showing up, pictures are absent, etc. It is all working fine on internet explorer and used to work on firefox until last night.

    Thanks to some hints in several strings, I went back to the Control Panel in XP, clicked on Sounds and Devices, clicked on Audio, then changed the default device to the Realtek HD Audio output I have on my computer. Now I can hear You Tube video sound and other Internet audio fine, at least for now. I will come back if it stops again. Thanks to all who posted.

  • Since moving to OS 10.7.3 one of my animations quit working in Safari

      Since moving to OS 10.7.3 one of my animations quit working correctly in Safari 5.1.7  (it works correctly in all other browsers on Mac and PC). I restarted the computer to make sure that wasn't a problem. Other animations on the site are working correctly.
    Here is the page:
    http://www.loriswebs.com/menu_samples.html
    It's the "menu item indented on mousover animation."  It's not supposed indent only one line of text.
    You'll have to view it in another browser to see how it's supposed to work.
    Anyone know what could be causing this?

    Firstly, apologies for the delayed response! Secondly, thanks for the advice!
    I have created another user and both browsers are perfectly fine and instantly responsive.
    My security settings are on WPA/WPA2-Personal(PSK).
    Any suggestions what in my main user causes the problem?

  • I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something mis

    I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something?

    Where are you hosting the site a what are you using to upload the site files to the server?
    OT

  • Two finger scrolling quit working on Windows 7 Boot Camp.

    My two finger scrolling just quit working while running Windows 7 on Boot Camp. Any ideas?

    Mr Tech,
    I did insert my Mac OS X Snow Leopard DVD once I was in Windows 7 and installed the boot camp thing, which installed all of the drivers

  • When I installe Firefox version 4 my finger print scanner quit working. Any fixes for this?

    I downloaded and installed Fire Fox 4.0 a few weeks ago. As soon as I downloaded the new software, my finger print scanner quit working. The scanner light that normally appears when ever there is a request for entering a user name or password no longer turned on and the scanner was no longer functional. I removed the new Fire Fox version and re-installed version 3.6.17. My finger print scanner is now working again.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • USB hubs quit working with 10.7.2

    I have a Mac Pro, dual quad-core 2.8GHz Xeon, 10GB ram. Three D-link DUB-H7 usb hubs. After the update to 10.7.2 and iTunes 5.0.1 (not sure exaclty when), my usb devices & hubs quit working properly. For a while they would work occasionally.
    I have a USB keyboard which works if it's plugged in directly when the computer boots. But other devices (external drives, flash card reader, iPod dock, USB display) don't work at all. I tested the hubs with another Lion system, and they work on that. iTunes wireless sync quit as well.
    I've tried resetting PRAM and SMC. Neither fixed the problem. Tried repairing permissions. No change. Rebooting (many times).
    Could it be a USB driver conflict? I removed VirtualBox usb drivers, as well as Parallels, but not vmware, which I also own.
    When I plug in a device, I get 'trouble enumerating' and then "The IOUSBFamily was not able to enumerate a device." in the system.log
    Any ideas? Is my motherboard dying? If so, why does the keyboard still work, and nothing else?

    Followup info. I reset the PRAM and booted into 10.5.1, on another drive.
    This time, similar behavior; HID devices (keyboard, mouse, bluetooth) work fine. Hubs (which work fine on another Lion computer!) generate a bunch of console errors:
    11/19/11 11:21:31 AM kernel USBF: 746.706 USB Device IOUSBHubDevice is violating Section 9.3.5 of the USB Specification -- Error in GetConfigDescriptor( wLength = 4)
    11/19/11 11:21:31 AM kernel USBF: 746.707 AppleUSBHub[0xf536000]::ConfigureHub No config descriptor
    11/19/11 11:21:31 AM kernel USBF: 746.707 AppleUSBHub[0xf536000]::start Aborting startup: error 0xe0004056
    11/19/11 11:21:31 AM kernel USBF: 746.707 IOUSBHubPolicyMaker[0xf536000]::start - ConfigureHubDriver returned false

  • HT201412 My Ipad quit working - it's 2 years old.  I called Apple and they basically told me that it's done.  I can pay 249.00 to get a reburbished Ipad 1, or buy a new one.  I want to know why it died?  They mentione it could be the hard drive.

    My Ipad 1 quit working after 2 years.  Was never dropped, abused, etc.  Just quit the other night.  Went to the Apple store, called the support line and they tell me that since the warranty is up I can pay 249.00 for a refurbished Ipad or buy a new one.  Not happy at all.  I want to know why it quit.  The person I talked to at Support says he doesn't know what happened.  He says it sounds like my hard drive crashed.  ANyone else have this problem?  I am so mad.

    If the tech you talked to said anything about a "hard drive", he was completely ignorant or misspeaking rather badly. The iPads have no hard drive; the storage is all solid state. You may wish to talk to another technician, or make an appointment at an Apple Store if there's one near you, and confirm the diagnosis of a hardware failure.
    If you've confirmed that it is indeed a hardware failure, then you can pay the replacement price, find an independent iPad service shop and see if they can do a repair for less, or buy a new iPad. If it were me I would put the money toward a new, or at least newer, iPad rather than pay the replacement charge. You can get some good deals on refurbished iPad 2 and third-generation iPads from the Apple Store, any of which will run the most current versions of iOS, something which the first-gen iPad will not, and would come with a full warranty (which could be extended to two years with AppleCare).
    As to why your iPad failed, it's impossible to say with any certainty. The circuitry could have had a tiny flaw that finally failed, or the iPad could have received a static shock, something quite common in many areas in the winter when the air is dry.  Sorry it happend to you, but anything can fail.
    Regards.
    Message was edited by: varjak paw

Maybe you are looking for

  • MSI 865PE NEO2-V booting problems [Solved]

    Hi.  I've been building a new computer and am seeing some weird stuff. System Specs: -P4 3 GHz Socket 478 -MSI 865PE NEO2-V -V22 http://www.saveateagle.com/865pe-ne...EO2-V&ovtac=CMP -128mb ATI Radeon 9800 pro -120 GB Western Digital -1GB dual channe

  • Creation of Article with purchasing view.

    Hi, I am using BAPI_MATERIAL_MAINTAINDATA_RT  to create Article. I am able to create article using Basic view, Log. DC view etc. There is no purchasing view in HEADDATA. Also  fields like Purchase organization, net price etc are not present in any st

  • Import PO Secess dot get post (for capital goods)

    1)     created import PO(capital goods material) 2)     capture excise 3)     Made GRN 4)     Post excise invoice when post in J1IEX, and simulate, Secess dont come. remaining all comes ex CENVAT OH     S Debit     719.87 CENVAT on CG-ADC     S Debit

  • Transportaion probled for Variable Substitutiom Method

    hi all,. we have done variable substitution method in DEV, but it not reflecting in QA. also tell me wht r the things we need to change manually after importing the object into INT and QA? regards sreeni

  • Early model Mac Pro's Expansion Slot Utility not working with 10.5.6 update

    I'm reading that the 10.5.6 update may have crippled the Expansion Slot Utility for early Mac Pros. I have a 2.66 Mac Pro, and I just installed a Kona 3 card in slot 3. Already had an ATI 1900xt in slot 1. However, the Expansion Slot Utility program