FTP to ABAP Proxy Scenario - getting error CO_TXT_CHANNEL_PASSWORD_ERROR

We have transported PI and EP data from development server to respective production, every thing is running fine except the abap proxy scenarios i.e. PI reads file from ftp location and calls the abap proxy but we are getting following errors:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<!--  Call Adapter
  -->
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
  <SAP:Category>XIServer</SAP:Category>
  <SAP:Code area="OUTBINDING">CO_TXT_CHANNEL_PASSWORD_ERROR</SAP:Code>
  <SAP:P1 />
  <SAP:P2 />
  <SAP:P3 />
  <SAP:P4 />
  <SAP:AdditionalText />
  <SAP:ApplicationFaultMessage namespace="" />
  <SAP:Stack>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = FD768D4A8772DB50E1000000AC10041E) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023)</SAP:Stack>
  <SAP:Retry>M</SAP:Retry>
  </SAP:Error>
Any solution?
Please note that I have searched and applied solutions given on SDN forums but didn't get any success. So I am looking for new suggestions.
Regards,
Jawed Ali

Jawed ,
Please test the HTTP destination of your receiver comm channel.
Which is the RFC connection to your R3 system.
Transaction SM59 and check the logon parameter for the connection you are using.
Regards,

Similar Messages

  • File/FTP to ABAP Proxy (file as attachment)

    I have the following scenario: File/FTP -> XI -> ABAP Proxy but not the normal case. What I need is the picked file as attachment and the file name. I hope this is possible.
    I have found the following blogs:
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    /people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
    I have no idea where I have to start. How I should define the sender and receiver message interface? How I have to configure the sender file/ftp adapter?
    I'm using PI 7.1 SP 7.

    At the moment I have the following problem. I always get an error during mapping the request message. This is the error message:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Mapping der Request-Message
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MT_SCANFILE_to_MT_SAP_SCANFILE_</SAP:P1>
      <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException:</SAP:P2>
      <SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.ParserE</SAP:P3>
      <SAP:P4>xception: XMLParser: No data allowed here: (hex) ~</SAP:P4>
      <SAP:AdditionalText />
      <SAP:Stack>Während des Anwendungs-Mappings com/sap/xi/tf/_MT_SCANFILE_to_MT_SAP_SCANFILE_ ist eine RuntimeException aufgetreten. com.sap.aii.utilxi.misc.api.BaseRuntimeException:Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) ~</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    And if I use transaction sxmb_moni I see that the payload MainDocument is my pdf document and I can read it.
    MG%PDF-1.3
    %âãÏÓ
    2 0 obj
    /WinAnsiEncoding
    endobj
    3 0 obj
    <<
    %Devtype POST2    Font COURIER  normal Lang DE
    /Type /Font
    /Subtype /Type1
    /BaseFont /Courier
    /Name /F001
    /Encoding 2 0 R
    >>
    endobj
    4 0 obj
    <<
    /Length 5 0 R
    u2026.
    I believe there is still an error at my communication channel configuration of the ftp sender adapter.

  • Issue in Iodc- abap proxy scenario

    Hi all
    I have a idoc to abap proxy scenario. The issue is ,
    when we send the idoc to client A of target system, it works ifne.
    But when we send the saem mesage to Client B, we find a error message in sxmb_moni of Target system. the mesage is Application_fault.
    Is it because of any error in XI configuration or somethin else.

    hi all
    thanks for all your responses.
    I forgot to mention that based on a particualr field value in the idoc , it will be routed to eihter Client 100 or 200 .
    I gave the conditions in Receiver Determination.
    Same Server Proxy  is used in both the target business sytems.
    I have done all the Configuration Steps ,( Created two separate business systems also )
    Also I have checked wiht all the system settings to be made in the target system B.
    When i trigger the idoc to Client 100, it goes to XI and then reaches  Client 100 of System B
    without any problem. I get the desired result from proxy code.
    When i send the saem idoc to Client 200, it reaches the target system and routed to client 200. But getting this error message in
    the Call Inbound PRoxy step. (from sxmb_moni)
    <SAP:Category>Application</SAP:Category>
      <SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
    Since it reaches the target system correctly, i guess there is nothing wrong in the XI configuration side.
    But if its Application fault, how come the same data is processed successfully in one client whereas it thorws error in another.

  • HTMLError in sxmb_moni, Idoc to ABAP Proxy Scenario

    Hi Friends
    I am trying to send data from R3 to SCMTM system(SAP System), via Idoc to ABAP Proxy Scenario ,I am getting the following under HTMLError in sxmb_moni
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
      <SAP:P1>400</SAP:P1>
      <SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
      <SAP:P3>(See attachment HTMLError for details)</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED) (See attachment HTMLError for details)</SAP:Stack>
      <SAP:Retry>A</SAP:Retry>
      </SAP:Error>
    Any ideas will be helpful.

    Hi,
         I faced similar problem. it was due to configuration problem in SXMB_ADM. corss check  specific server confiration in SXMB_ADM.
    /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    Regards,
    Reyaz

  • ABAP proxy scenario file - PI7.1- ECC  NO_MAPPINGPROGRAM_FOUND

    Hello Experts,
    I have ABAP proxy scenario file -> PI7.1->ECC . I am getting an error for communication between PI and ECC system. the error is NO_MAPPINGPROGRAM_FOUND and pointing to operation mapping in the  software component.
    What i found  in TCODE SXMB_MONI is  2 adaptor call  one from one below the other out of which one is in error.
    Also when a file is passed from the file server to the SAP PI  I see 2 entries in SXMB_MONI for the same Payload one from source system to target system and one from target system to source system ( ie. from business component as sender and ECC as receiver system and one entry for ECC system as receiver and business system for file as receiver ) is this how it should be
    one more thing i would like to specify is that my service interface is Point to point enabled . Is it happening because of that
    Request you help on urgent basics
    BR Heth

    Hi,
    1. in PI, by hazard, your Service Interface (SI) does not the mode "synchronous"?
    2. or does this SI was declared firstly with "synchronous" mode and the proxy generated with this mode, and then you decided to put "Asynchronous"... without to regenerate the proxy in ECC?
    If it's the case, in ECC, select your SI, do a right-click and regenarete the proxy.
    3. for the 2nd message (returned by ECC to PI), have you seen the Payload content and SOAP Header?
    Could you please also check the Pipeline (e.g CENTRAL, CENTRAL_BACK) ?
    4. In SXMB_MONI of ECC, how many messages have you: one ? or two ?
    Regards
    Mickael

  • File to ABAP Proxy Scenario

    Hi All,
    I am  doing File-to-ABAP Proxy Scenario, in the sender side side it is picking the file, but in sxmb_moni it is giving the error:
      *<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
    *- <!--  Call Adapter*
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIProtocol</SAP:Category>
      <SAP:Code area="MESSAGE">DUPLICATE_DETECTED</SAP:Code>
      <SAP:P1>4CFF4691EEE211DC85E30019D1522982</SAP:P1>
      <SAP:P2>CENTRAL</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Message ID 4CFF4691EEE211DC85E30019D1522982 already exists in called system (pipeline CENTRAL)</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    Can u plz tell me why this error is occurring and how we can resolve this error.
    Thanks & Regards,
    Vikas

    Hi Vikas
    make a dummy change and activate your object then make a full refresh
    you can make it through in 3 ways
    1) tcode SXI_CACHE
    2) go to ID -> environment and make a full cache refresh
    3) http://<host>:5<sys#>00/CPACache/refresh?mode=full     Full CPA cache refresh
    when you do the developement then these are stored in ABAP data dictionary table which can be refreshed by delta cache
    while full cache will delete this temporary object and make this cahe into runtime
    hope this will help you
    thanks
    sandeep
    if helpful reward points

  • INTERNAL - AMF_ERROR in XML -- ABAP proxy scenario

    Hi Experts,
    Can any one help me to solve this following issue please, it is happening while I am executing the scenario between XML File to ABAP Proxy scenario.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">AMF_ERROR</SAP:Code>
      <SAP:P1>1</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>Error when processing message number 1 in package No object type found for the message. Check that the corresponding process is activated An exception has occurred.</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>.
    This XML message has got 5 Lines Header and more than 100 Lin Items, this kind of Header and Lin item message 3 to 4 in one XML, I am using multi mapping. Message mapping shows working fine, OM also shows working fine. BPM is splitting messages to send messages to ABAP Proxy on SNC 7.0. After I have done all with SDN experts support, still I am having the above issue. can any one experties might help to resolve this?
    I will appreciate your support.
    Thanks & Regards
    San

    Can you please explain the solution.
    Regards,
    Rashi

  • Creation of package structure for ABAP proxy scenario

    Hi All,
    I have a doubt on package structure used for ABAP proxy scenario. What is the specific reason to create a four level package structure? Can some one please explain? Thanks in advance.
    Regards,
    Sudheer.

    Hi Sudheer,
    Can you pls clarify what do you mean by 'four level package structure' ?
    Are you referring to the ABAP structures that get created during creating the proxy by SPROXY transaction ? These structures get automatically created. We simply have to write the code using these structures.
    Or do you mean the 'package' which is mandatory to create a transportable ABAP object ? i.e. transport from Development to Staging and then Production.
    Regards,

  • Sender Abap Proxy no get in PI

    Hi expert,
    I have an sender abap proxy scenario which working fine in development server and even staging server but when transported to production server, the data seem can't go into PI server. I have check all the setting and sure the setting was set correctly. When i check on the system log in sm21 abap ERP, it show an error.
    Operating system call gethostbyname failed (error no. 0 )
    Any idea on how to solve this? Thanks.

    Hi,
    plz check transactions sldcheck and sldapicust. Everything ok?
    What about SXMB_ADM? System maintained as Application System? Destination given to PI Runtime?
    Can you ckeck that destination at SM59?
    Plz have a look to destinations SLD_NUC and SLD_UC. Do they work?
    Regards,
    Udo

  • Configure ABAP Proxy scenario in PI7.3

    Hello Experts,
    Can someone please let me know if we have somewhere step by step procedure to configure an ABAP Proxy scenario in PI7.3, I couldn't find How-to guide related to this on SDN.
    Thanks a lot.
    Best Regards,
    Shweta

    I dont know abt your installation whether you have java stack alone or both java stack and abap stack.
    AAE or local processing:
    You can do using soap adapter as transport protocol and message protocol as XI for proxy. This way you can use local processing using AAE.  I dont see documents in SDN as of now. But it is pretty simple. Just follow the steps what I mentioned.
    Classical processing or abap engine:
    Still the same as previous versions.

  • Error while usinjg the JDBC to ABAP Proxy Scenario

    Hello Rocks,
    This is my scenario like JDBC --- Pi --- ABAP Proxy
    while i am given a sender side jdbc XSD structure is like this
    VWENTITYAGGREMENT
      Row             1-unbound  occurence
          POOL_ID   0-1 occurence
          CUST_ID
          AGREEMENT
           PRODUCT_ID
            CONTRACT_TYPE
            CONTRACT_TYPE_DESCR
            AGRMNT_STATUS
            STATUS_DESCR
              EFFDT
             TERMINATION_DT
             ADD_DT
             ADD_TM
    while i am writing a select query in Sender JDBC CC is like this
    SELECT POOL_ID,CUST_ID,AGREEMENT,PRODUCT_ID,CONTRACT_TYPE,CONTRACT_TYPE_DESCR,AGRMNT_STATUS,STATUS_DESCR,EFFDT,TERMINATION_DT,ADD_DT,ADD_TM FROM vwEntityAgreement.
    Here i am getting this Error message like this :
    Error Description: Database-level error reported by JDBC driver while executing statement 'SELECT POOL_ID,CUST_ID,AGREEMENT,PRODUCT_ID,CONTRACT_TYPE,CONTRACT_TYPE_DESCR,AGRMNT_STATUS,STATUS_DESCR,EFFDT,TERMINATION_DT,ADD_DT,ADD_TM FROM vwEntityAgreement'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: Invalid column name 'POOL_ID'.'. For details, contact your database server vendor.
    So please give me your valuable inputs !
    Regards,
    Ravi.

    Invalid column name 'POOL_ID'.'. For details, contact your database server vendor.
    Did you confirmed the name POOL_ID as suggested?
    Why is the tablename different (check the case) in the query that you make and in the XSD structure that you mentioned......check if this is causing the problem.
    Regards,
    Abhishek.
    Edited by: abhishek salvi on Jun 4, 2010 10:24 AM

  • File to Abap Proxy Scenario : No message log in SXMB_MONI

    I have a PI Scenario in which a FTP server is polled every 5 minutes, and when it receives any file,  file is archieved and abap proxy is called. Few days back it was running perfectly fine. But For last couple of days I am facing strange error.
    My File is archived but abap proxy isnot called, neither I get any message in SXMB_MONI.
    any guesses what should I do?
    Jawed Ali

    Hi Jawed,
    HOLD means you have given QoS as EOIO in sender channel and the first message got failed and hence all messages are waiting..
    Check this thread
    Re: PI 7.1 Messages stuck into the Queue of the Adapter Engine
    Try resending the messages through runtime workbench->message monitoring->adapter engine
    Regards
    Suraj

  • ABAP-Proxy to SOAP: Error in SOAP Adapter

    Hi!
    I would like to implement ABAP-Proxy to SOAP scenario.
    Unfortunately my SOAP receiver channnel has the following error:
    SOAP: call failed: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: No SOAP Envelope but 1 definitions; HTTP 200 OK: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK
    Furthermore the call of  /sap/bc/soap/rfc of business system B is erroneous
    http://<server system B>:8000/sap/bc/soap/rfc
    Here I get the error: HTTP 500 Internal Server error
    Can some one help me to solve this problem?
    Thank you very much!
    regards
    Holger

    Hi,
    Are you using the webservice exposed by SAP or it is third party webservice. Can you explain your complete scenario? What is the url you have given in your receiver SOAP Channel? Was that no configured earlier?
    If at all you are using the SAP webservice, the wsdl link should be.
    http://<server>:<http port>/sap/bc/soap/wsdl11?services=BAPI_MATERIAL_EXISTENCECHECK&sap-client=200
    The target url you will be able to see in the wsdl itself also
    amit

  • Inbound Abap Proxy - Message ID error

    Hi,
    We are on XI 2.0.  We have a scenario of flat file --> XI --> R/3 via ABAP Proxy.  The file is processed in XI through file adapter, converted to XML doc, and sent to R/3.  In Monitor of R/3 we get the error mesage "Message ID XXXXXXXXXXXXXX for pipeline CENTRAL already exists in called system".
    Has anyone come across this error?  Any help is much appreciated.
    Thanks in advance.
    Best Regards,
    Doo

    Hi Venki,
    It has a status of 'Processed Successfully (Message Processed)' in XI.  In R/3 it has a status of 'Message Already Processed'.
    Best Regards,
    Doo

  • SOAP to Proxy scenario communication error

    Hi Friends,
         Now i am developing SOAP to Proxy scenario,  i am testing WSDL file using SOAP UI software and i am getting an error in SOAP UI tool.
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
    <html>
    <head>
    <title>Error Report</title>
    <style>
    td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
    A:link {color : #0059AA;}
    A:visited {color : #999999;}
    A:active {color : #999999;}
    </style>
    </head>
    <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
    <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
    <tr bgcolor="#FFFFFF">
    <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b>  403   Forbidden</b></font></td>
    </tr>
    <tr bgcolor="#3F73A3">
    <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
    <td height="23"><img width=1 height=1 border=0 alt=""></td>
    <td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP NetWeaver Application Server </b></font></td>
    </tr>
    <tr bgcolor="#9DCDFD">
    <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
    </tr>
      </table>
    <br><br><br><br><br><br>
    <p><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b>  Error: You are not authorized to view the requested resource.</b></font></p>
    <p><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><b>  <a href="https://wiki.sdn.sap.com/wiki/x/wIN3Cw">SAP Technology Troubleshooting Guide</a></b></font></p>
    <p><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><table>
    <tr>
    <td valign="top"><b> Details:</b></td>
    <td valign="top"><PRE>No details available.</PRE></td>
    </tr>
    </table></font></p>
    </body>
    </html>
    I have tried with the same WSDL earlier  it was working fine, now its not working and throwing the above error.
    Kindly suggest me to overcome from this issue.
    Regards,
    Senthil.

    Hi Senthil,
    Try with the authentication preemtive. Also, check your URL because that error seems that you are accessing to wrong PI section or your user has not the enough credentials, try with PIAPPLUSER or with the same roles that this user.
    Regards.

Maybe you are looking for

  • Exception handling in a stored procedure

    Hello, I have a stored procedure with one IN parameter that  insert values in a table as a treatment ,and i have to define an exception that raise when the same row is inserted several times (the row should be inserted one time). do you have any idea

  • To Get material group for a particular Plant

    HI, I need some info like to find all the materil groups and the related plants for the same. Regards, Ramesh.

  • Error while doing IV for Service Delivery Payment

    Dear Support,   There is Problem while doing Invoice for delivery Payment(Agent commission) in case of Service Order having without account assingment. While doing Invoice for that Delivery cost , system is giving a error message 'Enter a GL Account'

  • How do I compress a huge flash file for a web banner?

    Hi there, I am having trouble figuring out how to compress a huge flash file for a small web banner. I have 3 jpeg sequences (lowquality) that are used as background animations and the swf file is now over 900kb. I need a file under 200 or even 100. 

  • Realtek HD audio driver updated

    For my HP Media Center m7060n with Windows XP the HP site indicates the most updated driver is as of Sept 2005.  I am having problems with Power Director 9 which I bought a couple of weeks ago and their tech support believes one of the reasons is an