FTP transfer gives incorrect characters after unicode upgrade

Hello all,
We write a file on a FTP drive containing data from an internal table. We use FM FTP_R3_TO_CLIENT to write this file. The internal table contains characters like 'ü'. Before our unicode upgrade this process worked fine. After our unicode upgrade the FTP file contains instead of the 'ü' characters like 'Ã¼'.
The internal table passed to the FM is still ok in the unicode system, only the result seems not. We did set the unicode flag on the SAPFTP RFC destination but this made no difference.
Any idea?
Thanks and best regards,
Boris

Hello Anil,
Below items we checked between MDMP 46B and Unicode ECC6 with production client table SKAT. some Spanish display not correct.
Unicode ECC6.0     46B
Short Text     Short Text
Ant a prov - Gto imp     Ant a prov - Gto imp
Regal¨ªas     Regalías
Prov Herramentales     Prov Herramentales
Provisi¨®n de SLA     Provisión de SLA
Prov Fin Vida (EOL)     Prov Fin Vida (EOL)
Gtos de imp     Gtos de imp
Mat dañado o perdido     Mat dańado o perdido
Papeleria e insumos     Papeleria e insumos
Gastos Vtas-Diseño     Gastos Vtas-Diseńo
Ganancia p fluc camb     Ganancia p fluc camb
Aj anual p inf     Aj anual p inf
Depreciaci¨®n fiscal     Depreciación fiscal
Best Regards
Key

Similar Messages

CCMS there are no entries in "displays alerts" after unicode upgrade.

Hello
After an Unicode upgrade of an SAP 4.7, there are no entries in "displays alerts".
Table ALALERTDB empty.
Thanks

Hi Gervase,
I don't know what you have done yesterday, but now I can see note 1032334. Thanks.
I closed the sap call again.
Anyways, it was very strange, in transaction SNOTE I tried to download this note but then the message appeared "this note is not released, please inform your sap support". And on sap support portal it was near the same. Now I will implement it and give you a feedback if you wish.
kind regards
Diana

Download to Excel after Unicode Upgrade not working

Hi
Before the unicode upgrade we downloaded a spreadsheet, specifying the columns and table. Since the upgrade the spreasheet opens and start to create the columns, but as soon as it tries to write the table we get an error at teh following code.
class C_OI_CONTAINER_CONTROL_CREATOR method i_oi_spreadsheet~insert_one_table
Error as follows
\INTERFACE=I_OI_ERROR
I_OI_ERROR~ERROR_CODE           CALL_NOT_FLUSHED
I_OI_ERROR~IS_FLUSHED
I_OI_ERROR~HAS_FAILED           X
I_OI_ERROR~HAS_SUCCEEDED
ERROR_NR                                                   999999-
ERROR_STRING                               50
Does anyone know why this is occuring and what the solution please?
Thanks.

Can you let us know your support package levels? Also you right click and then export it to Excel?
Something to do with packages and xcel levels as well.

Non-unicode FTP transfer of chinese characters

Hi,
We're trying to transfer data in SAP stored under .txt format using an abap program to FTP across to another external system. Our current SAP system is 4.6C is does not have unicode capability and uses code page to translate non-English texts. We have data that contains chinese characters and we would need to automatically transfer these data across to the external system via FTP.
The problem we face is that it appears that the text in the receiving end was unable to interpret the chinese characters and funny characters are appearing. How do we solve this problem ?

hi
as far as i know when working with korean characters
we came to know that OS level should support the language characters
usally if the text file is having ascii characters that is enough(no need of any kind of specifi language characters, korean or chinese or what ever it may be)
if u open this text file with proper OS installed in your system then it will appear correctly for you
otherwise it will show junk characters
so concentrate on the ascii values for the chinese characters in your system
if the target system supports chinese characters then this ascii characters should appear as chinese characters to them also

SRM PO not getting transfer to ECC Backend after SP07 upgradation

Dear Gurus
We are in Classic scenario SRM 7.2
Recently we have upgraded SP07 in R/3 system ECC 6.6.
Prior SP 7 upgradation SRM PO created against RFx response were getting transferred to ECC backend in Held status with couple of error messag
(which later user use to do further changes in ECC)
Now post SP7 upgradation, we are finding an error in SXMB_MONI as"Error in Receiver Side ABAP Application
not finding much help in debug thorugh SPROXY
can anyone guide on this issue
Thanks & Regards

Dear Elham,
To find the solution of the problem I think you need to debug.
Follow below steps if this help you
a) Run the report "FBGENDAT"
b) Input the data as below screen shot
c) Then go to se37 execute FM : BAPI_PO_CREATE1
d) You will find the test data directory and test data will be saved as below
e) In this test date change PO number you should get the error which you are getting above.
Thanks
Ankit Jain

Why do JPGs print as a mix of characters after Leopard upgrade?

I can print MS Word document. I can print a Jpeg files through iPhoto. However,I can't print a JPEG with Photoshop CS3. It sends the file to my HP Color LaserJet 2550n, but it prints out several lines of mixed characters across dozens of pages. No image prints, just the jumble of letters and numbers.
I just updated to Leopard and Adobe Creative Suite CS3 this month. Prior to this I had no problems with printing. I print wirelessly from my MacBook Pro to my Airport Extreme (white dome).
Does anybody have any suggestions on how to fix this? I do not what to find workarounds. I would really prefer to have a driver downloaded as I do not like to mess with the computer code.
I have seen many posts with differing printing errors with Leopard. It seems that my problem is not as bad as a few others are facing. Has anyone heard if a fix is on the way?
Thanks for any tip you can provide.

I can print a new image (with .jpg extension, taken 28Jan2008) in Preview and iPhoto, however in Photoshop CS3, it will print out dozens of pages with just a few characters, to a few dozen characters along the top of each page.
I can print a old image with .jpg extension taken several years ago in Feb.2006 in iPhoto or Preview but not in Photoshop.
So my assumption is that Photoshop is the problem. I am looking at the Adobe forums as well. But so far not much luck.
Anyone with a thought to share????
Thanks,

Exception Aggregation (Average) displaying incorrect values after EHP1 Upgr

Hi All,
Exception Aggregation (Average) displaying incorrect values after EHP1 Upgrade in our BW system
We have recently upgraded the system to EHP1. After the upgrade some of the queries where we are using Exception Aggregation (Average) started giving the incorrect values.
Eg. We are displaying three Key Figures KF1, KF2 and KF3 (=KF1 %A KF2) against Store Hierarchy. In KF3 we are using Exception Aggregation (Average) on a characteristic 0PLANT.
There are 14 rows against 0PLANT and out of those 2 rows are blank for KF1, so for KF3. When it is calculating the average of these key figures its dividing the total value by 12 instead of 14 which is not correct in our case. Earlier it was dividing the total by 14.
So in this case 'Average' and "Average of all values <>0" are behaving the same way.
Kindly provide some inputs on this.
Best Regards,
Sachin Verma
+44 7506740018

Hi,
Thanks for viewing the thread. And happy to let you know that the issue was resolved.
The solution was:
Two formulas (local) were created, one including the formula variable with replacement path for ZD1, with exception aggregation on ZD1, and the other with formula variable with replacement path for ZD2, with exception aggregation on ZD2. Both these formulas are hidden.
Another formula (local) was created for u2018time takenu2019 = formula with ZD1 u2013 formula with ZD2, with exception aggregation total on u2018ZDOCNOu2019.
For the second instance, when one requires exception aggregation on records that has multiple values for keys, a nesting of formulas can be done displaying only the ones required.
For e.g. a formula with exception aggregation on say characteristic u2018item no.u2019 can be hidden, and included in another formula for exception aggregation on characteristic u2018document no.u2019. This is a typical case where one can achieve calculation before aggregation for a calculated key figure, formula or a counter.
Hope it might help someone, and saves time and effort for a similar issue posted.
Also would like to keep this thread open for exploring better solutions.
Regards,
Vijay

Some character display incorrect after unicode conversion

Dear Experts,
Currently we upgrade our SAP system from 4.6B NU to ECC6.0 UN.
in 4.6B system we had implemented Simple Chinese and French language package to the system. after upgrade to ECC6.0 no-unicode system. we perform a MDMP unicode conversion.currently system running with ECC6.0 unicode interface with language 1EFD. SUMG releated tasks had been finished. Chinese and French language checked OK in ECC6 UN system.
Our issue is. in the past time. some Spanish local end user typing some spanish character in some master date field when they login in 4.6B GUI choice english as login language.these kind of spanish characters could not display correct in current unicode environment.
could you please given us some suggestion for how to fix this issue.
I also sent this message in the Netweaver administrator forums with below links.
Spanish display incorrect after unicode conversion

Hello,
I doubt that the data shown by you in the link was caused by Spanish users logged on in EN.
I think this was rather caused by utf-8 data uploaded into the Non-Unicode system.
In this case, you need to repair the according texts manually, I do not know any automatic repair.
Best regards,
Nils Buerckel
SAP AG

Printing in Russian Language - after ECC 6.0 unicode upgrade

Hello ,
Earlier users from russia are able to print in SAP 4.6C using SAPWIN Device type in russian language.
but after unicode conversion and ECC 6.0 EHP 4 upgrade, they are not able to print in russian using SAPWIN.
In print preview ,it is showing correclty, but not in output.
any help ?
regards,
Chaitanya.

Hi,
It should not be necessary to change to SAPWIN5. Device type SAPWIN5 only supports cyrillic fonts like COURCYR, HELVCYR or TIMECYR. Therefore, even if the erong font is used in the form, the device type converts it to a Russian font. If yuo use a correct font for Russian characters in the form, then SAPWIN should also work.
SWINCF should also work with the current form setting.
Regards,
Aidan

I upgraded my 4s to 7.0.4 and now I can't access hotmail through my main mail app. When I open it a pop up says password incorrect even after I put my password in it pops up again. How do I fix this please help

I upgraded my 4s to 7.0.4 and now I can't acicess hotmail through my main mail app. When I open it a pop up says password incorrect even after I put my password in it pops up again. How do I fix this please help

After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

After lollypop upgrade I can no longer transfer files from LG g3 to windows8 computer using USB charge cord. Can I roll back to Kittcat?

After lollypop upgrade I can no longer transfer files from LGg3 to windows8 computer using USB charge cord. Can I roll back to Kittcat?

That is definitely odd, grantcool. Let's help restore this important data transfer feature. To confirm, when you connect the USB cable to your phone and computer > Pull down the Notification Bar > Select USB Connected > Can you choose Media Sync (MTP) ?
NicandroN_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Finding: Incorrect SQL throws a random error (after 2005 upgrade)

Hi I thought that I would share an experience that we found after upgrading a system to 2005:
Due to the upgrade of SBO, one of our addons didn't work properly after upgrading it to 2005. Basically the code would break in random places (while stepping through it in the Development Environment).
After some time we identified the error was being thrown because a sql query we were using was incorrect due to the changing of the DB structure in the upgrade. The weird thing was that it didn't throw an error at rs.DoQuery(query) but actually would step into the recordset and then the addon would suddenly stop working - hence the reason it took a while to identify it was the sql causing the problem.
Anyway updating the sql fixed the problem, but if anyone else is finding strange behavior whilst trying to identify why an addon might stop working after an upgrade, you should check any sql being used is still correct....
Daniel

The first versions of SBO2005A SDK (PL00 to PL04) was the say the least VERY buggy... PL05,06 and now 07 seem to get things under control... Any rampup version of 2005 should at least get up PL05 ASAP... I didnt have many problem with the SQL, but "Server produced an error was a very common error".. my problem was primarily in matrixes (add/remove of lines), itemevent (pval internal COM error) and the dangerouse UserTable error due to currupted object in it....

I have an iphone 4s and upgrade to ios6. It wont connect now after the upgrade to itunes and the itunes doesnt regonize the device. Im so freaking sad. Please somebody give me a fix. Why did I have to upgrade to ios6? Please somebody let me see the light

I have an iphone 4s and upgrade to ios6. It wont connect now after the upgrade to itunes and the itunes doesnt regonize the device. Im so freaking sad. Please somebody give me a fix. Why did I have to upgrade to ios6? Please somebody let me see the light.
I cant even get into itunes because it wont recognize it to do a reboot or a rollback.

The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck.

Missing key preview when typing characters in IPad After iOS7 upgrade

How can I enable the key preview when typing characters in Ipad?
After I upgraded my Ipad mini to IOS 7, the preview when hitting keys are not showing anymore.
Its so difficult especially when typing passwords wherein you wouldnt be able to know if you are hitting the right character.

Two things that might help. Reset all your settings and reset the phone. Use the Settings app to reset all settings. Settings > General > Reset > Reset All Settings Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that helps.
The update to iOS 7 added several new features and turned them all on. There are numerous suggestions for reducing battery life by turning off unneeded features. Go through Settings and turn off things you do not need or use. Especially look at Notifications, Push notices, Background App Refresh.

After iOS7 upgrade, iTunes only gives blank screens. And Netflix won't load. Any idea on what to do?

After iOS7 upgrade, iTunes only gives blank screens. And Netflix won't load. Any idea on what to do?

Yep. I did some more poking around and found that one. Downloaded it and tried to run it and got more errors. Did some more searching and found a fix for the installer on Vista. Ran the fix and tried the ipod software again. It got further, but then hung up again. I'm still trying to figure this all out. Anyone got any answers it'd be much appreciated.

FTP transfer gives incorrect characters after unicode upgrade

Similar Messages

Maybe you are looking for