FTPS Sender and FTPS Receiver adapter. Pls help

Hi All,
I need to make file to file scenario with secure connection
I am using FTP Sender and Receiver Adapter with Connectivity
as FTPS.
Please let me know the steps I need to do for this
1. Integration Directory
2. If I need to generate certificates what steps I need to do:
    a. How to generate certificates
    b. Where to install these certificates like File Servers, XI
        Server etc.
3. How to use these certificates in File Server, Integration
   Directory etc.
Please send me a document to do all steps.
In advance thanks and Full Points will be awarded.
Regards

Hi,
Deploy SAP Java Cryptographic Toolkit.&
Add the CA certificate to the key storage as below.
Keystore: service_ssl
X.509 Certificate & Private Key: ssl-credentials
This means that you need to import the CA hierarchy of your FTPs server certificate into the list of trusted CA's in XI ( either on J2EE side in the keystore service or in ABAP side via transaction STRUST , depending on where your client is ).
If connection security parameter in communication channel for Sender FTP Adapter is set to "FTPs( FTP Using SSL/TLS) with Control Connection" only, file gets successfully created with data at the FTP server but as soon as we switch the connection security parameter to "FTPs( FTP Using SSL/TLS) with Control and Data Connection".The initial handshaking happens successfully and file gets created at the FTP Server but its empty, connection fails when attempt is made to write data into file and we end up with said error thereby closing the connection.
SAP Note 821267
Refer below link
SAP Network Blog: SFTP vs. FTPS in SAP PI
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/400580c1-8d16-2a10-3eb3-ec1026dae0d5

Similar Messages

  • HTTP Sender and HTTP Receiver adapter. Pls advice urgent

    Hi All,
    There is one Third Party that wants to send XML data and receive XML data with XI.
    Please let me know can I use HTTP for that.
    How to use HTTP Sender part?
    How to use HTTP Receiver Adapter?
    Pls send blogs/doc for that
    Thanks and Regards

    hi.,
    Check this thread for the code for a HTTP Client,
    /message/266750#266750 [original link is broken]
    Also, check these blogs. They use HTTP adapters for their configuration,
    /people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
    /people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
    http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
    Check these links for the configuration part.
    http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
    Weblog :
    /people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - although this weblog is
    aimed at explaining the sync-async bridge.. Sriram has taken http-to-file scenario as the example
    note:reward points if solution found helpfull.....
    regards
    chandrakanth.k

  • RFC Sender and RFC Receiver Sync Scenario . Help required.

    Hi,
    I need to make RFC Sender and RFC Receiver Sync Scenario.
    Any docs/links for it.
    Regards

    Hi,
    I have CRM (r/3) and DM (r/3)system.
    Data from differnent tables of CRM system needs to go to
    DM system different tables , data will be saved there and then return response back to CRM system.
    For this I have given one RFC for CRM system
    For this I have given one RFC for DM system
    So I have to make Sync Outbound Interface
    and Sync Inbound Interface.
    So I think so no BPM is required.I am correct?
    Adapter -- RFC Sender and RFC Receiver Adapter.
    Regards
    Edited by: Henry H on Jan 29, 2008 11:20 AM

  • Problem between SOAP Sender and JDBC Receiver

    Hi,
    I have a asynchronous scenary between SOAP Sender and JDBC Receiver.
    The idea is sending an ID for updating one register.
    Table structure is:
    TABLE AS_PERSONA
        (P_RUT                         VARCHAR2(10) NOT NULL,
        P_NOMBRE                       VARCHAR2(50),
        P_APELLIDO                     VARCHAR2(50))
    The ID is the P_RUT field.
    The structure of message that I send by SOAP, is the following:
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
         <SOAP-ENV:Body>
              <m:MT_CONS_SOAP xmlns:m="urn:prueba:voliva">
                   <CONSULTA>
                        <P_RUT>15445</P_RUT>
                   </CONSULTA>
              </m:MT_CONS_SOAP>
         </SOAP-ENV:Body>
    </SOAP-ENV:Envelope>
    The JDBC receiver structure is:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_CONS_PERSONA xmlns:ns0="urn:prueba:voliva">
         <Statement>
              <AS_PERSONA action="UPDATE">
                   <table>AS_PERSONA</table>
                   <access>
                        <P_NOMBRE>DELETE_BY_XI</P_NOMBRE>
                        <P_APELLIDO>DELETE_BY_XI</P_APELLIDO>
                   </access>
                   <key>
                        <P_RUT>15445</P_RUT>
                   </key>
              </AS_PERSONA>
         </Statement>
    </ns0:MT_CONS_PERSONA>
    When I do a call to SOAP by XMLspy, it returns a message without data, that means succesfull reply.
    I see message monitor and see the succesfull flag. But in the database it doesn't update the register.
    This scenario was proved using the File Sender and same JDBC Receiver, then result was succesfull.
    I proved SOAP Sender with a File Receiver, storing information from SOAP sender in an archive, and works well.
    Then I imagine that exist some problem between SOAP and JDBC. what could be happening ?
    Thanks.

    Hi,
    Looks like the problem is with the JDBC receiver...try updating the value in the table by using a File-JDBC scenario..does it work..check the adapter monitor in RWB..
    Regards,
    Sushumna

  • One sender and two receiver

    Hi All,
    I have a scenario in which there is only one outbound Message interface and 2 inbound message interfaces ( one sender and two receiver). In XI, how can i configure the interface determination for this? Shall i need to put * for receiver and add 2 inbound message interfaces and interface mappings.
    Thanks
    Michael

    Use xpath in your interface determination in case you have some conditions, else u can *** multiple interfaces in your int. det.. also ref:
    /people/suraj.sr/blog/2006/01/05/multiple-inbound-interfaces-within-a-service

  • Mapping between Sync sender and Async Receiver

    Hi Experts,
    How to do mapping between Sync sender and Async Receiver?
    Flow: Sync SOAP Sender Client -> First Async webservice call -> Second Sync webservice call
    1. I have to send some input/request details to first webservice call. It will just update the database.If I do mapping with SOAP Sender client and first Async webservice.. I am getting timeout, because it expects response mapping too.
    2. Only Second webservice call return the response back to SOAP Sender client.Here mapping between SOAP Sender client and Second Sync webservice call. I don't have any problem here.
    I have to pass the same request info to both webservice calls, Please tell me how to do the async mapping in BPM?
    Regards
    Sara

    Hello Sara,
    Hope these blogs are useful to you..
    /people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
    /people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
    /people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in
    ccBPM
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in
    ccBPM
    Thanks,
    Satya Kumar

  • Integrtion Scenario using BPM with two sender and multiple receiver

    integrtion Scenario using BPM with two sender and multiple receiver
    How many Application Components are required?

    Hi Vinod,
    1) In integration repository you can have one or many software components it depends on your landscape orchestration
    2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
    also each connection between systems and bpm must have receiver determination and so on.
    Advice: Please treat BPM as a separate system.
    best,
    Wojciech

  • My sender and the receiver message types structures are same.do I need to m

    Hi all,
    My sender and the receiver message types structures are same.do I need to mapping in this case.
    If it is not required .Let me know in detail,How to proceed.
    Thanks,
    Srinivasa

    Hi,
    If is just to pass the message (as the sender source is the same as the receiver source),
    first you should have the Message Interface of you message
    then you should configure the Receiver determination, as the sender interface use your message interface and in the interface determination you can use the same message interface (same name). You dont have to add any mapping, just let empty and save. Just use one message interface for sender a receive.
    Any questins let me know.
    Regards,
    Lpbuff

  • HT3702 i want 2 cancel my visa from my account and us itune card pls help me

    i want 2 cancel my visa from my account and us itune card pls help me

    In order to take the credit card off of the account, you will need to open the iTunes program on your computer, pick the option for store from the left, and then pick account from the right under quick links. In the account you should be able to change credit card type to 'none' and/or add a gift card.
    If you are doing this from iphone, ipad, or ipod touch, it will be under settings > store
    if you continue having problems, you can contact itunes directly by filling out the form below. they will follow up via email to make sure your account issue is resolved
    http://www.apple.com/lae/support/itunes/contact.html

  • My ipohn 4 died last night and wont turn on pls help me

    my ipohn 4 died last night and wont turn on pls help me

    Hi Punkermama,
    If the screen on your iPhone is dark but the phone otherwise seems to be responding (sounds, etc), an Accessability feature known as Screen Curtain may have inadvertently been activated. You may find the following section of the iOS 7 for iPhone manual helpful (Apendix A - Accessability, in the Voiceover section on pg 126):
    Turn the screen curtain on or off. Triple-tap with three fingers. When the screen curtain is on, the screen contents are active even though the display is turned off. 
    iPhone User Guide For iOS 7
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Regards,
    - Brenden

  • How to have Secure Connection for File Adapter.Pls help

    Hi All,
    For File to File Scenario
    How to have Secure Connection for File Adapter.
    Pls send links/blogs explaining this scenario.
    Regards

    hi rich
    go through these links
    FTPs connection failed - error ".. certificate rejected by ChainVerifier"
    Re: What is SFTP, FTI channels
    http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
    FTPS implementation question.
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
    Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
    /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
    File adapter
    thanks
    Kunaal

  • File Sender and Mail Receiver .....what is the error all about?

    Dear All,
      I am trying to send a file using mailpackage to my Lotus Notes id.But it is giving the below mentioned error.
    <b>error occured: [2005-09-28T11:42:43Z] unable to call the mailer; com.sap.aii.messaging.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.net.ConnectException: Connection refused: connect</b>
    The below mentioned is my Input File.
    <b><?xml version="1.0" encoding="UTF-8"?>
    <ns:Mail xmlns:ns="http://sap.com/xi/XI/Mail/30">
       <Subject>Interesting</Subject>
       <From>MailMsg</From>
       <To>[email protected]</To>
       <X_Mailer>Lotus Notes</X_Mailer>
      <Content>Hi ra.</Content>
    </ns:Mail></b>
    and my Mail Adapter Configuration for this is,
    <b>Transport Protocol: SMTP
    Message Protocol: XIPAYLOAD
    Adapter Engine: Integration Engine
    URL: smtp://mailservername
    User:
    Password:
    Use Mail Package is checked and
    Encoding : None</b>
    1.Should I have to have an access to the Mail Server?
    2.Why is the error?
    3.What all Configuration I need to change,if any?
    4.How to solve the error?
    Without running the scenario,when I went to Monitor ,it was showing,
    <b>MyConfig. Scenario:MyMailAdapter as running:started</b>
    Please help me to solve this problem.
    Thank You

    No Stefan,
      I don't have SP10.
    Do I need make any new configuration on the Mail Server side or i can carry on with the existing corporate one (which I am not supposed to touch)?
    I haven't created any mail server of my own.But I want to send that file to my corporate domain or my <b>yahoo</b> domain for example.Now should I need to make any new configuration or configuration changes on my Integration Server?
    I am very much confused in this regard.I have not made any other configuration other than that of Mail Adapter and File Adapter(ie,only XI related configurations).
    I didn't even configured my own smtp server.
    This is what I have done so far.Can you please through more light on it?
    Thanks in Advance,
      Sugata Basu

  • JMS Receiver Adapter configuration help

    Hi Experts,
    In our scenario, we need to integrate MQ series with SAP PI, where in we are using JMS Sender and Receiver adapters to put and get the mssg from correponding IBM MQ queues.
    Using Sender JMS Adapter we are consuming a txt mssg by specifying corresponding module configuration parameters, which is for converting into a XML mssg.
    The issue is with JMS Receiver adapter, Inorder to get an XML mssg apart from standard/default entries ... do we need to maintain any module configuration parameters?
    thnx

    Hi RajSekhar,
    We have maintained the below modules in the respective comm channels:
    Sender JMS channel:
    ConvertJMSMessageToBinary
    ConvertBinaryToXMBMessage
    MessageTransformBean
    CallSapAdapter
    Note: Maintained the necessary message transform bean module key parameters in the module configuration
    Receiver JMS Channel:
    ConvertMessageToBinary
    SendBinarytoXIJMSService
    Did not alter the by default modules in the Receiver JMS comm channel.
    Am i missing any other configuration.
    Thnx

  • How can I view The date, time, sender and/or receiver of a text message online?

    I would like to view the date and time sender and receiver of my text messages I read it can be done. I can't find where. If somone one could point me out in the right direction I would appreciate it. Thanks

    Log into your account and to the right of the phone photo you will see usage details in blue then on the next screen pick the phone on the account you want to see the details for and under that you can click to see eveyrthing in detail.  Mary

  • PGP Encryption Exception in File and SFTP receiver adapter.

    Scenario: We have got the PGP (Private and Public key pair) and stored the same in PI server path.
    We have sample partner Public key which is store at temporary shared location for testing purpose.
    Issue: While doing the encryption we are getting below exception in case of File Adapter and SFTP adapter.
    Case 1: File Receiver Adapter
    Case 1: SFTP Receiver Adapter
    Can anyone please suggest on below exception?
    How to proceed to resolve the above issue or what should be the cause of the issue?
    Thanks,
    Vertika

    Hi everyone,
    Thanks for reply Sarah
    I have downloaded and added the JCE unlimited strengthh juristiction policay files are updated as directed in above blogs.
    Now I am able to encrypt the File using plane File Adapter (NFS). But still it is throwing exception for SFTP adapter. Below is the error detail:
    MP: exception caught with cause javax.ejb.TransactionRolledbackLocalException: ASJ.ejb.005043 (Failed in component: sap.com/com.sap.aii.adapter.pgp.app, BC-XI-CON-B2B) Exception raised from invocation of public com.sap.aii.af.lib.mp.module.ModuleData com.sap.aii.adapter.pgp.ejb.api.PGPEncryptionBean.process(com.sap.aii.af.lib.mp.module.ModuleContext,com.sap.aii.af.lib.mp.module.ModuleData) throws com.sap.aii.af.lib.mp.module.ModuleException method on bean instance [email protected] for bean sap.com/com.sap.aii.adapter.pgp.app*xml|com.sap.aii.adapter.pgp.ejb.jar*xml|PGPEncryption in application sap.com/com.sap.aii.adapter.pgp.app.; nested exception is: java.lang.NullPointerException: while trying to invoke the method com.sap.engine.interfaces.messaging.api.Message.getMessageKey() of a null object loaded from local variable 'message'; nested exception is: javax.ejb.EJBException: ASJ.ejb.005043 (Failed in component: sap.com/com.sap.aii.adapter.pgp.app, BC-XI-CON-B2B) Exception raised from invocation of public com.sap.aii.af.lib.mp.module.ModuleData com.sap.aii.adapter.pgp.ejb.api.PGPEncryptionBean.process(com.sap.aii.af.lib.mp.module.ModuleContext,com.sap.aii.af.lib.mp.module.ModuleData) throws com.sap.aii.af.lib.mp.module.ModuleException method on bean instance [email protected] for bean sap.com/com.sap.aii.adapter.pgp.app*xml|com.sap.aii.adapter.pgp.ejb.jar*xml|PGPEncryption in application sap.com/com.sap.aii.adapter.pgp.app.; nested exception is: java.lang.NullPointerException: while trying to invoke the method
    What could be the reason of above exception in SFTP adapter? Please suggest.
    Thanks,
    Vertika

Maybe you are looking for