Full Load" and "Full load with Repair full request"

Hello Experts,
Can any body share with me what is the difference between a "Full Load" and "Full load with Repair full request"?
Regards.

Hi......
What is function of full repair?? what it does?
How to delete init from scheduler?? I dont see any option like that in infopackage
For both of you question there is a oss note 739863-Repairing data in BW ..........Read the following.....
Symptom
Some data is incorrect or missing in the PSA table or in the ODS object (Enterprise Data Warehouse layer).
Other terms
Restore data, repair data
Reason and Prerequisites
There may be a number of reasons for this problem: Errors in the relevant application, errors in the user exit, errors in the DeltaQueue, handling errors in the customers posting procedure (for example, a change in the extract structure during production operation if the DeltaQueue was not yet empty; postings before the Delta Init was completed, and so on), extractor errors, unplanned system terminations in BW and in R/3, and so on.
Solution
Read this note in full BEFORE you start actions that may repair your data in BW. Contact SAP Support for help with troubleshooting before you start to repair data.
BW offers you the option of a full upload in the form of a repair request (as of BW 3.0B). If you want to use this function, we recommend that you use the ODS object layer.
Note that you should only use this procedure if you have a small number of incorrect or missing records. Otherwise, we always recommend a reinitialization (possibly after a previous selective deletion, followed by a restriction of the Delta-Init selection to exclude areas that were not changed in the meantime).
1. Repair request: Definition
If you flag a request as a repair request with full update as the update mode, it can be updated to all data targets, even if these already contain data from delta initialization runs for this DataSource/source system combination. This means that a repair request can be updated into all ODS objects at any time without a check being performed. The system supports loading by repair request into an ODS object without a check being performed for overlapping data or for the sequence of the requests. This action may therefore result in duplicate data and must thus be prepared very carefully.
The repair request (of the "Full Upload" type) can be loaded into the same ODS object in which the 'normal' delta requests run. You will find this request under the "Repair Request" option in the InfoPackage (Maintenance) menu.
2. Prerequisites for using the "Repair Request" function
2.1. Troubleshooting
Before you start the repair action, you should carry out a thorough analysis of the possible cause of the error to make sure that the error cannot recur when you execute the repair action. For example, if a key figure has already been updated incorrectly in the OLTP system, it will not change after a reload into BW. Use transaction RSA3 (Extractor Checker) in the source system for help with troubleshooting. Another possible source of the problem may be your user exit. To ensure that the user exit is correct, first load a user exit with a Probe-Full request into the PSA table and check whether the data is correct. If it is not correct: Search for the error in the exit user. If you do not find it, we recommend that you deactivate the user exit for testing purposes and request a new Full Upload. It If the data arrives correctly, it is highly probable that the error is indeed in the user exit.
We always recommend that you load the data into the PSA table in the first step and check the result there.
2.2. Analyze the effects on the downstream targets
Before you start the Repair request into the ODS object, make sure that the incorrect data records are selectively deleted from the ODS object. However, before you decide on selective deletion, you should read the Info Help for the "Selective Deletion" function, which you can access by pressing the extra button on the relevant dialog box. The activation queue and the ChangeLog remain unchanged during the selective deletion of the data from the ODS object, which means that the incorrect data is still in the change log afterwards. After the selective deletion, you therefore must not reconstruct the ODS object if it is reconstructed from the ChangeLog. (Reconstruction is usually from the PSA table but, if the data source is the ODS object itself, the ODS object is reconstructed from its ChangeLog). You MUST read the recommendations and warnings about this (press the "Info" button).
You MUST also take into account the fact that the delta for the downstream data targets is created from the changelog. If you perform selective deletion and then reload data into the deleted area, this may result in data inconsistencies in the downstream data targets.
If you only use MOVE and do not use ADD for updates in the ODS object, selective deletion may not be required in some cases (for example, if incorrect records only have to be changed, rather than deleted). In this case, the DataMart delta also remains intact.
2.3. Analysis of the selections
You must be very precise when you perform selective deletion: Some applications do not provide the option of selecting individual documents for the load process. Therefore, you must first ensure that you can load the same range of documents into BW as you would delete from the ODS object. This note provides some application-specific recommendations to help you "repair" the incorrect data records.
If you updated the data from the ODS object into the InfoCube, you can also delete it there using the "Selective deletion" function. However, if it is compressed at document level there and deletion is no longer possible, you must delete the InfoCube content and fill the data in the ODS object again after repair.
You can only perform this action after a thorough analysis of all effects of selective data deletion. We naturally recommend that you test this first in the test system.
The procedure generally applies for all SAP applications/extractors. The application determines the selections. For example, if you cannot use the document number for selection but you can select documents for an entire period, then you are forced to delete and then update documents for the entire period in the data target. Therefore, it is important to look first at the selections in the InfoPackage exactly before you delete data from the data target.
Some applications have additional special features:
Logistics cockpit: As preparation for the repair request, delete the SetUp table (if you have not already done so) and fill it selectively with concrete document numbers (or other possible groups of documents determined by the selection). Execute the Repair request.
Caution: You can currently use the transactions that fill SetUp tables with reconstruction data to select individual documents or entire ranges of documents (at present, it is not possible to select several individual documents if they are not numbered in sequence).
FI: The Repair request for the Full Upload is not required here. The following efficient alternatives are provided: In the FI area, you can select documents that must be reloaded into BW again, make a small change to them (for example, insert a period into the assignment text) and save them -> as a result, the document is placed in the delta queue again and the previously loaded document under the same number in the BW ODS object is overwritten. FI also has an option for sending the documents selectively from the OLTP system to the BW system using correction programs (see note 616331).
3. Repair request execution
How do you proceed if you want to load a repair request into the data target? Go to the maintenance screen of the InfoPackage (Scheduler), set the type of data upload to "Full", and select the "Scheduler" option in the menu -> Full Request Repair -> Flag request as repair request -> Confirm. Update the data into the PSA and then check that it is correct. If the data is correct, continue to update into the data targets.
And also search in forum, will get discussions on this
Full repair loads
Regarding Repair Full Request
Instead of doing of all these all steps.. cant I reload that failed request again??
If some goes wrong with delta loads...it is always better to do re-init...I mean dlete init flag...full repair..all those steps....If it is an infocube you can go for full update also instead of full repair...
Full Upload:
In full upload all the data records are fetched....It is similar to full repair..Incase of infocube to recover missed delta records..we can run full upload.....but in case of ODS does'nt support full upload and delta upload parallely...so inthis case you have to go for full repair...otherwise delta mechanism will get corrupted...
Suppose your ODS activation is failing since there is a Full upload request in the target.......then you can convert full upload to full repair using the program : RSSM_SET_REPAIR _ FULL_FLAG
Hope this helps.......
Thanks==points as per SDN.
Regards,
Debjani.....
Edited by: Debjani Mukherjee on Oct 23, 2008 8:32 PM

Similar Messages

EXACT DIFFERENCE BETWEEN FULL LOAD AND REPAIRFULL LOAD?

HI Champ,
Can anyone explain me the exact difference between full load and Repairfull load?Give e some senario where we can go for this?Please.....
10zin

Hi,
Full repair can be said as a Full with selections. But the main use or advantage of Full repair load is that it wont affect delta loads in the system. If you load a full to a target with deltas running you again will have to initialize them for deltas to continue. But if you do full repair it wont affect deltas.
This is normally done we when we lose some data or there is data mismatch between source system and BW.
Check the OSS Note 739863 'Repairing data in BW' for all the details
Symptom
Some data is incorrect or missing in the PSA table or in the ODS object (Enterprise Data Warehouse layer).
There may be a number of reasons for this problem: Errors in the relevant application, errors in the user exit, errors in the DeltaQueue, handling errors in the customers posting procedure (for example, a change in the extract structure during production operation if the DeltaQueue was not yet empty; postings before the Delta Init was completed, and so on), extractor errors, unplanned system terminations in BW and in R/3, and so on.
Solution
Read this note in full BEFORE you start actions that may repair your data in BW. Contact SAP Support for help with troubleshooting before you start to repair data.
BW offers you the option of a full upload in the form of a repair request (as of BW 3.0B). If you want to use this function, we recommend that you use the ODS object layer.
Note that you should only use this procedure if you have a small number of incorrect or missing records. Otherwise, we always recommend a reinitialization (possibly after a previous selective deletion, followed by a restriction of the Delta-Init selection to exclude areas that were not changed in the meantime).
1. Repair request: Definition
If you flag a request as a repair request with full update as the update mode, it can be updated to all data targets, even if these already contain data from delta initialization runs for this DataSource/source system combination. This means that a repair request can be updated into all ODS objects at any time without a check being performed. The system supports loading by repair request into an ODS object without a check being performed for overlapping data or for the sequence of the requests. This action may therefore result in duplicate data and must thus be prepared very carefully.
The repair request (of the "Full Upload" type) can be loaded into the same ODS object in which the 'normal' delta requests run. You will find this request under the "Repair Request" option in the InfoPackage (Maintenance) menu.
2. Prerequisites for using the "Repair Request" function
2.1. Troubleshooting
Before you start the repair action, you should carry out a thorough analysis of the possible cause of the error to make sure that the error cannot recur when you execute the repair action. For example, if a key figure has already been updated incorrectly in the OLTP system, it will not change after a reload into BW. Use transaction RSA3 (Extractor Checker) in the source system for help with troubleshooting. Another possible source of the problem may be your user exit. To ensure that the user exit is correct, first load a user exit with a Probe-Full request into the PSA table and check whether the data is correct. If it is not correct: Search for the error in the exit user. If you do not find it, we recommend that you deactivate the user exit for testing purposes and request a new Full Upload. It If the data arrives correctly, it is highly probable that the error is indeed in the user exit.
We always recommend that you load the data into the PSA table in the first step and check the result there.
2.2. Analyze the effects on the downstream targets
Before you start the Repair request into the ODS object, make sure that the incorrect data records are selectively deleted from the ODS object. However, before you decide on selective deletion, you should read the Info Help for the "Selective Deletion" function, which you can access by pressing the extra button on the relevant dialog box. The activation queue and the ChangeLog remain unchanged during the selective deletion of the data from the ODS object, which means that the incorrect data is still in the change log afterwards. After the selective deletion, you therefore must not reconstruct the ODS object if it is reconstructed from the ChangeLog. (Reconstruction is usually from the PSA table but, if the data source is the ODS object itself, the ODS object is reconstructed from its ChangeLog). You MUST read the recommendations and warnings about this (press the "Info" button).
You MUST also take into account the fact that the delta for the downstream data targets is created from the changelog. If you perform selective deletion and then reload data into the deleted area, this may result in data inconsistencies in the downstream data targets.
If you only use MOVE and do not use ADD for updates in the ODS object, selective deletion may not be required in some cases (for example, if incorrect records only have to be changed, rather than deleted). In this case, the DataMart delta also remains intact.
2.3. Analysis of the selections
You must be very precise when you perform selective deletion: Some applications do not provide the option of selecting individual documents for the load process. Therefore, you must first ensure that you can load the same range of documents into BW as you would delete from the ODS object. This note provides some application-specific recommendations to help you "repair" the incorrect data records.
If you updated the data from the ODS object into the InfoCube, you can also delete it there using the "Selective deletion" function. However, if it is compressed at document level there and deletion is no longer possible, you must delete the InfoCube content and fill the data in the ODS object again after repair.
You can only perform this action after a thorough analysis of all effects of selective data deletion. We naturally recommend that you test this first in the test system.
The procedure generally applies for all SAP applications/extractors. The application determines the selections. For example, if you cannot use the document number for selection but you can select documents for an entire period, then you are forced to delete and then update documents for the entire period in the data target. Therefore, it is important to look first at the selections in the InfoPackage exactly before you delete data from the data target.
Some applications have additional special features:
Logistics cockpit: As preparation for the repair request, delete the SetUp table (if you have not already done so) and fill it selectively with concrete document numbers (or other possible groups of documents determined by the selection). Execute the Repair request.
Caution: You can currently use the transactions that fill SetUp tables with reconstruction data to select individual documents or entire ranges of documents (at present, it is not possible to select several individual documents if they are not numbered in sequence).
FI: The Repair request for the Full Upload is not required here. The following efficient alternatives are provided: In the FI area, you can select documents that must be reloaded into BW again, make a small change to them (for example, insert a period into the assignment text) and save them -> as a result, the document is placed in the delta queue again and the previously loaded document under the same number in the BW ODS object is overwritten. FI also has an option for sending the documents selectively from the OLTP system to the BW system using correction programs (see note 616331).
3. Repair request execution
How do you proceed if you want to load a repair request into the data target? Go to the maintenance screen of the InfoPackage (Scheduler), set the type of data upload to "Full", and select the "Scheduler" option in the menu -> Full Request Repair -> Flag request as repair request -> Confirm. Update the data into the PSA and then check that it is correct. If the data is correct, continue to update into the data targets."
Refer.
Repair full request
Re: Repair full request
Steps to perform repair full request
full repair request
repair full request
Re: Repair Full Request
Thanks,
JituK

I am constantly being advised that my information has been accessed by a "new" iMac. I only have ONE iMac. What gives? And what is with the constant request to "update" my information?

I am constantly being advised that my information has been accessed by a "new" iMac. I only have ONE iMac. What gives? And what is with the constant request to "update" my information? As well, I have had to change my password a number of times since migrating to Yosemite; again: what's this all about? I Apple going the way of Microsoft for some reason? I left the Microsoft community because of constant problems with their OS and the unending string of "security updates"; is Apple and my iMac becoming "just another crap computer"?

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

SQL loader and stream files with new line '

I have been trying unsuccessfully to load EDI files using SQL loader. The problem
is that the lines are terminated by ' and when I use the stream file option it does
not recognise the line terminator given. As I understand it from the documentation
this should work - but it does not. I have also used the Hex option with no better
result. Does anyone have any ideas ?
I can and have used tr "[']" "[\n]" in Unix to convert the ' to newlines - I just
wonder am I missing something in SQL loader which will allow me to do this ?
This is the sql loader control file
LOAD DATA
INFILE 'WS860685.MFD' "Str ''' "
BADFILE 'WS860685.bad'
DISCARDFILE 'WS860685.dsc'
INTO TABLE "DUND1"."EDI_LOADED_TEMP"
REPLACE
FIELDS TERMINATED BY '+'
TRAILING NULLCOLS
(L1,
L2,
L3,
L4,
L5,
L6,
L7,
L8,
L9,
L10,
L11,
L12,
L13,
L14,
L15,
L16,
L17,
L18,
L19,
L20,
L21,
L22,
L23,
L24,
L25,
L26,
L27,
L28,
L29,
L30,
L31,
L32,
L33,
L34,
L35,
L36,
L37,
L38,
L39,
L40,
LNO)
Heres a sample of the data
UNB+UNOA:2+5398888501357+5398888501838+080306:0737+395+ DESADV+++1'UNH+0001+DESADV:D:93A:UN:EAN004'

http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:6020061915147
answers this question perfectly

My personally owned Acrobat 11 pro gets loaded and unloaded Along with My 49.95 Creative Cloud.

There must be a way to keep these apart. After I got my subscription to Creative cloud for $50.00 A Month I never USE MY OWN SOFTWARE ANYMORE. When one loads, they both load and both don't work at all.They both end up fully loaded so if you think uninstall one they both come off at the same time. Normally I know some place to start, tonight I'm baffled..It's a 50 TB Desktop machine formatting it is NOT an option,
Regards,
John C. Weum
Anchorage, Alaska

With the creative manager, you do not have to choose to install acrobat again if it already is on your system. However if it find your version outdated, it can offer you to update it, but you don't have to update it.
Acrobat itself will offer updates separately from the manager. So you can update from that if you choose to.
Acrobat will not uninstall from the manager unless you choose to.
What has be baffled is it stop working after the manager is installed. This is a bit beyond my expertise so hopefully someone else can help with that.
Have you asked in the acrobat forum if anyone else has had a similar experience? Acrobat Installation & Update Issues

PSE10 alternating loading and not loading

Oh computers, computers! They are amazing things but yet cause me so much pain! I have successfully put PSE10 and all my photos on my new PC without hitch. Just as I was sitting back with a smug self congratulatory grin on my face, I have noticed that the program will load up fine the first time (set to launch organiser), then if I close the program and re-open it just opens in the task bar below and won't show on the screen. I simply right click and close (I get no restore option), then relaunch the program and hey presto it opens fine. I can repeat this cycle of closing and opening and the alternate full opening and just in the task bar happens consistently.
I know it's not a major kick in the teeth, but I would like to not have to go through the double opening saga every other time. Any ideas?
Thanks in advance.
Mark

Bypass the Unwelcome Screen by creating Desktop shortcuts for the Organizer and the Editor, and restarting your computer.
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
The Unwelcome Screen leaves a zombie process running which prevents the actual program from launching again.
Ken

Safari and other browsers slow to load and wont load https (secure)

Since the last update of Safari 5, we have noticed that we can't load https pages. So we went to Firefox, that seemed to help for awhile. Now we can't always load https in either. We are also seeing that http pages wont load quickly in either browerser. We have researched all posts within the last month about Safari 5 and hang ups, crashes and slow loading....we have tried everything suggested. Since sites don't load quickly, this has taken a lot of time. Any suggestions would be wonderful. We have contacted our DSL provider 6 times in the last 30 days and they can't find anything wrong with their service or with the modem. We are at a loss. Currently we are trying to download the MocOSXUpdCombo 10.6.4 but we keep timing out. Don't even know if this post will post. Oh yeah, Mail is having problems as well. We ran disk first aid and did the permissions as well. Any suggestions would be wonderful.

Hi again:
I am a long way from an expert on anything - SSL or communications. The fact that both browsers are affected seems to take it out of a Safari-only thing. Also, since everything works on your other computer seems to let your ISP off the hook. I don't think it is your computer, per se.
I did get some random thoughts. Things you might look at/try:
1. Reset Safari (empty the cache, for sure)
2. Take a look at the firewall settings on the computer that is giving you problems.
3. You might try Open DNS (free one) to see if the domain name server process is, somehow, an issue:
http://www.opendns.com/start/
4. You might also download the OS X 10.6.4 combo updater and reapply it. That is probably an overkill and it will take awhile, but it is possible something went wrong with the update.
You can see I am fishing, but nothing seems to be consistent in the behavior.
Barry
P.S. The tundra may be frozen, but you live in a beautiful state.

Problem related to class loader and bootstrap loader

how class are loaded and how bootstraping please explain it in detail?

793241 wrote:
how class are loaded and how bootstraping please explain it in detail?Just to put in different words what previous posters are hinting at; this is not a place to come and get answers when you don't want to do research yourself - it is not even a problem you are having as it has a readily available solution; read and enlighten yourself.

Differences between billing and accounting document with down paym. request

Hello to all
We are creating down payment request billing from one sales order with two sales order items that has different tax classification material.
The billing document is created correctly (with the same value for each item), not as the account document.
If you compare the value from the billing document to the account document is not the same. In the account document the system decreases the amount of the first item with the tax amount of the second item and the same for the second item (the amount of the second item decreases the amount of the second item with the tax amount of the first item).Then the tax amount of the two items is right.
If the two items have the same tax classification material, it works fine.
Can anyone help me?, is it a problem with the payment request billing?.
Thanks in advance.
Edited by: tonnetti pablo on Jan 8, 2008 9:46 AM

Hi,
The following Customizing settings have to be made for down payment processing:
Settings for the billing plan To activate the billing plan function, maintain the materials, for which you wish to process down payments, with item category group 0005 (milestone billing). This gives the item type TAO via item type determination. The item type TAO calls up the billing plan function.
You need to implement the following activities in the billing plan for down payments:
Maintain deadline category This determines the billing rule (percentage or value down payment) for the down payment request. The system assigns billing type FAZ (payment request) defined in the standard system with billing category P. (For the billing type FAZ there is the cancellation billing document type FAS in the standard system).
Maintain the deadline proposal Use the down payments that are due for the proposed deadlines.
Maintaining a Pricing Procedure with the Condition Type AZWR:
In the standard system the condition type AZWR is delivered for the down payment value already provided but which has not yet been calculated. You must include this condition type in the relevant pricing procedure before output tax.
Enter condition 2 (item with pricing) and the calculation formula 48 (down payment clearing value must not be bigger than the item value) for the condition type AZWR.
Before the condition AZWR you can create a subtotal with the base value calculation formula 2 (net value). If the condition AZWR is changed manually, you can get information on the original system proposal from the subtotal.
Maintain the printing indicator The pricing procedure can not be marked as a transaction-specific pricing procedure (field Spec.proc.) The condition type AZWR has the calculation type B (fixed amount) and the condition category E (down payment request / clearing).
Maintaining the Billing Document In the standard system there is the billing type FAZ (down payment request) and the billing type FAS for canceling . The down payment is controlled using the billing category P of the billing type. A billing type becomes a down payment request when the billing category P is assigned. You have to maintain blocking reason 02 (complete confirmation missing) for the billing documents and assign it to billing type FAZ.
Copying control Copying requirement 20 must be entered in copying control at item level for the down payment request. In the standard system the order type TA for copying control is set up according to the billing type FAZ for the item category TAO.
Copying requirement 23 must be entered in copying control at item level for down payment clearing. In the standard system the order type TA for copying control is set up according to the billing type F2 for the item category TAO.
Financial Accounting settings A prerequisite for down payment processing is that the account is assigned to the underlying sales document. To do this, change the field status settings in Customizing as follows:
Set reconciliation accounts (transaction OBXR) For the `received down payments and `down payment requests from
the G/L accounts you have selected, you should assign the field status definition G031.
Maintain accounting configuration (transaction OBXB) For the down payments (posting key ANZ in the standard system) and the output tax clearing (posting key MVA in the standard system), you must maintain the posting key.
You must also carry out a G/L account number assignment for the tax account.
Maintain the posting key (transaction OB41) For posting key 19, set the sales order as an optional field
Maintain the field status definition (transaction OB14) For field status variant 0001, field status group G031, set the
sales order as an optional field
Assign the company code to the field status variants (transaction OBC5)
Regards,
Siddharth.

What is the diffrence between full load and delta load in DTP

hI ,
I am trying to load the data into CUBE from another cube using DTP ..
There are 2 DTPS ..
1: DTP with full load
2: DTP with DELTA load ..
what is the diffrence betwen thse two in DTP ...
Please can somebody help me

1: DTP with full load - will update all the requests in PSA/source to the target,
2: DTP with DELTA load - will update only new requests to the datatarget
The system doesnt distinguish new records on the basis of changed records, rather by the request. Thats the reason you have datamart status to indicate if the request has been loaded to further datatargets.

Full Load and delta loads of HR Data using ABAP Program

Hi All,
I need to write an ABAP program that will pull some HR data from some of the infotypes.When i run it for the first time it should pull all the data for all the employees but in the subsequent runs it should run only the delta changes
for example
inital run is on 04/30 it should pull all the data for all the employees
next run 05/02 then it should pull onlly the infotypes for which there is a change between 04/30 and 05/02
Please let me know the solution
Thanks
Bala Duvvuri

Rob,
I understand that I need to AEDTM field but the problem is
during the initial load i will not have any control date stored in the z table so i will fetch all the records using the select queries on various infotypesin the if condition but the problem is i need to repeat the same queries by adding the AEDTM condition in the else condition where control date is not initial(not an initial load) so it will be a duplicacy of all the select queries.
is it a good programming style?please let me know your thoughts on this
if p_ctrl is initial " Initial load
select queries
else " subsequent runs
same select queires with AEDTM condition
endif.
Thanks
Bala Duvvuri

When I send a text message to my friends Trac phone, my iphone 4s sends two text(even though I am under my 160 count). He said that it sends one full text and a second with just one word.

When I send a text message to my friends Trac phone, my iphone 4s sends him two messages(even though I am under my 160 count). He said that the first message is full and the second one is only one word. Can anyone help me with this?

When I send a text message to my friends Trac phone, my iphone 4s sends him two messages(even though I am under my 160 count). He said that the first message is full and the second one is only one word. Can anyone help me with this?

Home Directory is Full? And it is so not Full

Hi There:
I have two users on my computer and for some reason I cannot launch my mail program on one of them. Both users are listed as administrators and I have 2 hard drives installed using a firmtek controller card. The first drive where the OS is installed is an 80Bg drive with more than 57Gb available.
When I launch Mail on the first user ut says:
Mail cannot update your mailboxes becasue your Home Directory is full. You must free up space. Delete unnecessary files or documents. The thing is I have tons of space. The other user I can launch mail with no problems. I do have multiple mailboxes set up with the mail program that has the issues.
Please advise
Thanks
W

No thanks
I figured out that it was a corrupted envelope index file in my mail folder.
W

Load and Trim Problems with IdeaTab A1000

Lenovo IdeaTab A1000 16GB at work was a terrible device. Having spent two weeks hanging software. I had to give a warranty repairs.
After a week of warranty repairs, the device worked for five hours and again hung software ...
I'm beginning to think that was wrong with the choice of the device.

I have to try this and I will let you.
          Thanks
          Jon Eagles wrote:
          > All,
          >
          > We have a simple servlet which looks up an RMI object from JNDI and invokes
          > one of its methods in a loop. The RMI object is the HelloClusterImpl
          > example provided by WebLogic. The servlet basically copies the code from
          > the HelloClusterClient. In the cluster property file, our load algorithm is
          > setup to be round-robin. We are using IIS as our web server. If we start
          > up both servers in the cluster and then use another machine as our client to
          > call the HelloClusterClient, we see that the calls to HelloClusterImpl
          > alternate between the two clustered servers. In fact, it is done perfectly
          > at 50% for each server. When we run the servlet from with the client's
          > browser, however, it seems as if which ever server in the cluster that
          > receives the servlet request then takes 100% of the calls to
          > HelloClusterImpl and there is never any alternating. Although we can verify
          > that different servers in the cluster receive the servlet request, it seems
          > as if there is never any altering between the servers during the method
          > invocations on the HelloClusterImpl servant. Does this seem right?
          > Shouldn't there be alternating between the servers? Any help would be
          > greatly appreciated.
          >
          > Thanks,
          >
          > -Jon

Change First Load and Menu Disappear with scroll

Hello,
Im in a crossroad trouble and think that one of my problems is that i can resolve it changying the first load of my site and relink to one anchor link.
My other problem is that i want to recreate the behavior of the menu of this web http://www.smallstudio.com.au/ with no success, this disappear when scrolls the site.
Thanks for anticipate, im thinking that maybe can modify the html or do with Edge Animate, but maybe someone can help me because im walking in circles with this site.
Gracias!

Thank you, knorretje. Had no problems with logging on 2003. Lot of lines, but I propose that critical part 
0[220f140]: nsHttpChannel::OnCacheEntryAvailable [this=3f6f400 entry=5236740 access=3 status=0] 
0[220f140]: nsHttpChannel::Connect [this=3f6f400] 
0[220f140]: nsHTTPChannel::CheckCache enter [this=3f6f400 entry=5236740 access=3] 
0[220f140]: nsHttpResponseHead::Parse [this=6b113c0] 
0[220f140]: nsHttpResponseHead::ParseVersion [version=HTTP/1.1 200 OK] 
0[220f140]: Have status line [version=11 status=200 statusText=OK] 
0[220f140]: ParseContentType [type=image/gif] 
0[220f140]: nsHttpResponseHead::MustValidate ?? 
0[220f140]: no mandatory validation requirement 
0[220f140]: Not validating based on expiration time 
0[220f140]: nsHTTPChannel::CheckCache exit [this=3f6f400 doValidation=1] 
As I understand, all partial checks say that cache is good. But ending doValidation=1, probably, means that request will be sent. Do not see any reason.

Full Load" and "Full load with Repair full request"

Similar Messages

Maybe you are looking for