Full qualified host name not appearing in url within WSDL generated from PI

Hi
We are on PI711 ( AIX OS ) and are stuck with an issue of the fully qualifed hostname not appearing within WSDL file generated in PI71 for a webservice it exposes using the Integration builder
We changed the host name in exchange profile ( all locations ) from hostname to hostname.companyname.intra and also in the ABAP stack as recommended in all OSS notes.
We use the Integration Directory --> Sender Agreement --> Display WSDL option to generate the WSDL.
Its to be noted that all locations ( including url for WSDL ) have the fully qualified hostname except the url within the WSDL.
Dioes anyone come across this issue/ know which parameters to be updated on the PI server to make the url within the WSDL for the PI webservice to have the fully qualified host name ?

HI Karthik,
As Mentioned by Baskar donu2019t use proposed URL .. while creating WSDL in Id.. but instead provide URL in following format and use it in that place and create WSDL.. details about URL format..
the URL format is fix. and it is simple.
http://host:HTTPPort/XISOAPAdapter/MessagingServlet?channel=party:sendersystem:CC_sender
in above URL provide your sender service component name instead of sender system.
and provide SOAP sender communication channel name in place of CC_sender
provide your PI system host and http name in place of host and https and use this..
for more details about URL..
Propose URL when Configuring Sender SOAP Adpater
soap url
Thanks,
Bhupesh

Similar Messages

Fully Qualified Host Name

We Have installed Oracle 10g AS and Later Configure it by Changing the Canonical setting to "Off" from Status "On" in the httpd.conf file in apache Directory. so that we can access our application by ip address in place of host name.
After that whenever i tried to to log on to the single sign on it gives error "SSO Failure ........." However it shows in the address bar that the sing on was successfull but the URL same as that fully qualified host name.
now if i change the Host name to the IP everything goes on well
Could anyone please help me to Resolve the issue
Thanks in Advance

Later Configure it by Changing the Canonical setting to "Off" from Status "On" in the httpd.conf file in apache Directory. so that we can access our application by ip address in place of host name.Oracle's AS and related software is heavily dependant on the FQDN (fully-qualified domain name, or how you seem to be referring to the "host name") and how the browser refers to the AS in many places: not just SSO, but Portal, the IAS-Console, and many pieces-parts that support them. I would seriously suggest considering alternatives to trying to refer to the AS by its IP address, especially because the IP address is allowed to change, but oftentimes the hostname is not! That can only become confusing if the IP-address of the machine ever changes. :( I am also very confident that you will have serious issues allowing users outside of your system to use the Oracle Reports that you are developing.
If you are simply developing a J2EE application that refers users to the Oracle Reports servlet, I would highly recommend finding a solution which uses the FQDN of the system rather than its IP address.

Fully-Qualified Host Name empty in SMSY

Hello,
I am facing a problem in the SMSY of Solution Manager.
I've got some servers listed in the "servers" tree of the landscape components. Fine. But for all of them, the field Fully-Qualified Host Name is empty.
I need this entry for generating RFC with full host name....
If I put the full host name manually in this field, the RFC are right generated with the full host name in the technical data. But I would like to know how to retrieve it automatically (from SLD I presume...).
Anyone could help me ?
Thanks a lot.
Regards

Hi
Please have a look on the SAP note [Note 1368267 - Transfer fully-qualified host name|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1368267]
from SLD data capure please refer this
[http://help.sap.com/saphelp_sm32/helpdata/en/5c/36329947af074182eef7585ba88ee8/content.htm|http://help.sap.com/saphelp_sm32/helpdata/en/5c/36329947af074182eef7585ba88ee8/content.htm]
Jansi

Fully Qualified Host Name for XI Repository etc?

Hi everybody!
How do I get XI 3.0 to generate a URL for the IB:Repository and Directory, for example, with a fully qualified host name, instead of just http://sap2:50000/...? I already implemented Note 773830, but it hasn't helped. Any ideas?
Thanks a lot!
Francis Wolf

That is the beauty of XI...
Put an entry in your laptop or desktop pc
with the hostname and FQD...
IP hostname FQD name
Then it should show up...
John

How to change Port Information shown in sicf in fully qualified host name?

Hi guys,
I want to use the CS Documentation Tool for SAP BW.
In DEV everything is OK, but in PROD I can´t execute.
I know what´s wrong, but I don´t know where to correct the error.
When I use transaction sicf -> execute -> GoTo -> Port Information I can only see the server name instead of the fully qualified host name.
Can anybody tell me, where to change the name?
Thanks a lot,
Barbara

Those ports are defined in the instance profile of the system and can be defined/changed from RZ10. The parameter is icm/server_port_xx. If the parameter is not defined then it uses the default values.
The profile values looks something like this:
icm/server_port_0 PROT=HTTP,PORT=80$$,TIMEOUT=90,PROCTIMEOUT=3600
icm/server_port_1 PROT=SMTP,PORT=25$$,TIMEOUT=90,PROCTIMEOUT=3600
Hope this helps.
Thanks,
Naveed

How to change the fully qualified host name

Hi,
how can I change the fully qualiied host name?
Regards
Marc

Hi Michal,
I'm doing the FlightSeatAvailabilityCheck-Scenarion of the demo example and get an error. To get more details about the error I had a look in the XI Runtime Workbench. There I can see, that the wrong url is called (without the hostname) and that the access is forbidden (403). Therefore I want to change the fully qualified host name. I knew that I have to change icm/host_name_full but I don't know where I can do it (which transaction)?
Regards
Marc

Retrieve the host name behind the radware url

Hi,
Is it possible to retrieve the host name behind the radware url in BI Publisher template?
Thanks, R.

Hi,
Did you maintained the entry in below format
12.123.23.23 srstfdf srstfdf.shouse.com
in hosts file. If it is already maintained in the above format. then check the error if it is DNS related maintain the entry in DNS.
thanks,
madhu

How to use full qualified table names in RPD

Hi,
We are implementing the BI Financial Analytics, we have a requirement to use diffrent user accounts for DAC , ETL and OBIEE
DAC, ETL we are using user as XXOBI
For OBIEE RPD we have to use user with read only access such as XXOBI_APP
How can i make the changed to BI server / RPD to use full qualified names.
I have tried to select the Full Qualified table name property in Oracle Datawarehouse connection pool setting.
If i enable that all my sql query is showing tables as catalog.dbo.w_party_d ( my tables in physical layer showing under catalaog -> dbo -> all tables and joins)
Any help in this is appreciated.
Thanks
Kris

kmangamuri wrote:
Hi,
We are implementing the BI Financial Analytics, we have a requirement to use diffrent user accounts for DAC , ETL and OBIEE
DAC, ETL we are using user as XXOBI
For OBIEE RPD we have to use user with read only access such as XXOBI_APP
How can i make the changed to BI server / RPD to use full qualified names.
I have tried to select the Full Qualified table name property in Oracle Datawarehouse connection pool setting.
If i enable that all my sql query is showing tables as catalog.dbo.w_party_d ( my tables in physical layer showing under catalaog -> dbo -> all tables and joins)
Any help in this is appreciated.
Thanks
KrisAre you saying you just need to access the database using different accounts? If that is the case, why dont you just update the connection pool settings like username and password with XXOBI_APP account which you are supposed to be using for OBIEE?

Not able to read the wsdl file from server Premature EOF encounter

Hi All,
I am facing issue while accessing a web Service from server. Here is the clear view about it.
I created a simple SyncBpel process in a composite and deployed in to the server and it is working fine. Later i created a new Asyn bpel process in a composite and in the external reference i dragged a web Service and imported the wsdl url from server of the SyncBpel and wired the Asynbpel process to webserive .
Now here i am facing peculiar behavior which i am not able to trace it out.
1) For the first time when i import the url of syncBpel from the server i am not facing any error and it is working fine as expected but when i close the Jdeveloper and open it i am not able to user the web Service and it is saying as "Not able to read the wsdl file from server Premature EOF encounter"
2)When i close and open the Jdeveloper i can see the url of the wsdl which imported in webserver is changing from http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL to http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/BPELsync.wsdl
3)when I open and see the url http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL I can see the soap address as *<soap:address location="http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel!1.0*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c/bpelsync_client_ep"/>*
I don’t understand why the soap end contains “*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c” and this kind of url for soap address is coming to all the bpel process which I am deploying in the server.
I checked the in Jdeveloper where webproxy is uncheck and the server is also up but still I am facing issue of reading the error.
Can someone please help in resolving the issue.
I am using SOA 11g 11.1.1.5 and Jdeveloper 11.1.1.5
Many thanks.
Tarak
Edited by: user11896572 on Jan 17, 2012 5:22 PM

Hi,
Setting default from the jdeveloper -
During composite deployment from Jdeveloper (wizard driven), you will be given an option to choose the version of the composite and there will also be an option for you to choose if the composite needs to be deployed as default.
Setting default from the em console -
After deploying a composite, login to the em console and click on the composite that you want to set as default, and you will find a tab - "Set as Default". please note that this tab will not be seen, if the composite is already set as default.
Refer -
http://docs.oracle.com/cd/E12839_01/integration.1111/e10226/soacompapp_mang.htm
8.2 Managing the State of Deployed SOA Composite Applications
Thanks

Web Dynpro Application URL Host Name Not Correct

Hello,
I am developing a web dynpro application in our development system but when I activate the application it gets a URL that points to our test system. When I test the application in HTTP Service (SICF) the URL for the development system is passed to the browser. WHere do you maintain the host that is being used to build the URL for the web dynpro application when it is activated.
Thanks,
Jim N.

Hello,
To configure the FQDN (host name full), please take a look at these:
[http://help.sap.com/saphelp_nw2004s/helpdata/en/67/be9442572e1231e10000000a1550b0/content.htm] and
[http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm].
Regards,

Fully Qualified Host Name does not work

Hello,
I've EP 7 with Usage Types AS Java, EPC, EP, BI Java, BP-ERP & XSS.
I am using fully qualified hostname by means of making entries in hosts file at OS level. I've also set icm/host_name_full parameter correctly.
Now when I enter URL as http://<fully qualified hostname>:<port>/irj/portal I am able to login to the system but after which if I try to navigate through any links under Employee Self-Service and Manager Self-Service for e.g. Employee Self-Service --> Benifits and Payment --> Request Claims, nothing happens. neither it throws any error nor does any page is displayed.
Same thing when I try without using fully qualified hostname like http://<hostname>:<port>/irj/portal it works absolutely fine.
I have done same settings as described above on my development as well as production system where it works absolutely fine with fully qualified hostname.
Regards,
Kashyap

Hi
if you are using proxy try adding your domain name in your proxy exceptions list
Internet Options ->Connections ->Lan Settings->Proxy Server ->Advanced->Exceptions . try adding your host name to that list
hope it will work.
Jo

Host name not derived as FQDN (TH_GET_PLUGIN_INFO )

Hello,
we've got a problem in the CRM web UI, however, I assume it is more related to general BSP settings.
When testing a CRM component ICCMP_HEADER which is a BSP application in the component workbench
(tcode BSP_WD_CMPWB). The browser tells that an exception
CX_BSP_WD_HTTP_RESPONSE_ERROR is thrown in class
CL_BSP_WD_STREAM_LOADER, method LOAD_FROM_URL.
I did some debugging and found out that in this method in line 20,
function module TH_PLUGINS_ACTIVE is called. It returns that both HTTP
and HTTPS are active. Due to this, in line 31 the system calls method
CL_HTTP_CLIENT=>CREATE_BY_DESTINATION. In this method function module
TH_GET_PLUGIN_INFO is called. It returns the host name (uxsapl07)
without FQDN (.mobilkom.at). I tested the function module on our
development system (MSD) and it returns the full hostname
(vssapk08.mobilkom.at).
I've checked the host name buffer in tcode SMICM and it shows only the
hostname (no FQDN). If refreshing the buffer, it gets filled again with
only the hostname.
I've compared settings on productive system MSP with development system
MSD:
parameter: SAPLOCALHOSTFULL
MSP: uxsapl07.mobilkom.at
MSD: vssapk08.mobilkom.at
parameter: icm/host_name_full
MSP: empty
MSD: empty
However, in tcode SMICM --> paramters, both systems show the FQDN for
parameter icm/host_name_full.
I don't know why it works then on MSD and not on MSP.
Many thanks & regards
Wolfgang

parameter: icm/host_name_full
MSP: empty
MSD: empty
try setting the above parameter with the FQDN (RZ10) and restart the ICM
after restart run program RSPARAM to check whether the changes had taken effect
Regards
Raja

Contact names not appearing in texts or when calls recieved

I got off a plane from the UK to the US (this was a return trip, i'm from the US on Verizon) and when I turned my iPhone 4S back on, all of the contact names (who are in my Contacts) disppeared from emails, texts and my phone log. A friend told me to "Import SIM Contacts" but that didn't do anything. I deleted all of my texts hoping that when I sent new texts and recieved calls names would appear, however they still are not. Is there anything I can do other than take it to the Genius Bar?

I didn't have the problem when returning from International, but I did have the problem right after my new Verizon iphone was set up last week.
After reading some of the posts in the support forum, I first edited my contacts to include the +1 in front of the phone numbers (this may have been an unnecessary step, and it certainly was an annoying one).
Second, I used the *228 set up feature, closed the phone, contacts and text functions on the phone, then turned the phone off and back on, and it seemed to fix the problem for the most part. I think if you search the forum for *228, you will find posts that have the full sequence of steps to follow..
I have other issues with my phone, but at least this one seems cleared up for now.

Contact names not appearing in group text

When sending a group text the contact names do not appear but the phone numbers do, is there a way to change this? Phone is a Z30 STA100-5

I didn't have the problem when returning from International, but I did have the problem right after my new Verizon iphone was set up last week.
After reading some of the posts in the support forum, I first edited my contacts to include the +1 in front of the phone numbers (this may have been an unnecessary step, and it certainly was an annoying one).
Second, I used the *228 set up feature, closed the phone, contacts and text functions on the phone, then turned the phone off and back on, and it seemed to fix the problem for the most part. I think if you search the forum for *228, you will find posts that have the full sequence of steps to follow..
I have other issues with my phone, but at least this one seems cleared up for now.

VMs on Hyper -V Host Cluster not appearing in Private Cloud in VMM

Hello All,
We are running our production VMs (around 70 VMs) on a failover cluster (let’s say ProductionCluster) of Hyper-V hosts. I created a host group of ProductionCluster in VMM 2012 R2 (with Update Rollup
4 installed), added all the Hyper-V hosts to this host group.
Then I configured a Private Cloud using ProductionCluster, the job successfully completed. I verified it that my cloud was appearing in the VMs and Services workspace
à Clouds, my cloud is appearing there. I also verified that the private cloud library was
created, from Library à Cloud Libraries.
However, any of our production VMs is not appearing in VMs pane. I want to assign user roles and services to the private cloud.
I can see all the VMs when I go to VMs ribbon of host group, but not in private cloud pane.
Please help and guide me.
Thank you.
Regards
Hasan Bin Hasib

>Is it mandatory to associate my VMs with the Cloud?
No, it's not. You can have VMs 'outside' of your 'Cloud'.
>Can I associate my running (production) VMs to the Cloud?
Yes, you can.
>Will it reboot or change the any properties of VM?
No. The only change is the value of the 'Cloud' property.
>Actually, my ultimate goal is to assign delegate control to the VMs' users, and not to give full rights on my Cloud to the VMs' users.
For every VM created before your cloud were created you must assign a VM to your cloud if you want your cloud users to see\manage it. For every VM deployed to a cloud (by a user via WAP portal or if you select 'Deploy to a Cloud' option when deploying a
VM from a VMM Console) the "cloud" property will be set automatically.
http://OpsMgr.ru/

Full qualified host name not appearing in url within WSDL generated from PI

Similar Messages

Maybe you are looking for