Full Screen Playback + Add Marker Q

Is there a way to add a marker while watching in full screen? Previously I was able to do this by tapping M as I watched, then I could go back and add any notes to each marker location in the Browser clip or Sequence. Doesn't seem to work with 10.0.5, but maybe I'm missing something.

Similar Messages

  • Full screen playback jittery with Aero enabled

    Hello,
    Currently running the CS5 trial on a new (built specifically for cs5) W7 64 based Dell 12-core Xeon box with three monitors attached via two Nvidia Quadro 3800 cards and am having issues with the full screen playback - namely, when my third monitor  is enabled for full screen playback (connected via DVI>HDMI, 1920x1080@50Hz - yes I'm in PAL land) and my sequence matches, e.g. 50Hz - the playback is jittery (vsync slowing frame rate)- disabling Aero causes most of this to go away but now desktop video has to be disabled and there is some horizontal tearing (e.g. the vsync is now working but slightly adrift).
    Googling around seems to indicate others with similar problems so this might be a W7 problem - has anybody else seen this kind of issue, and if so got a decent resolution?
    I'd rather not have to splash out on unneccesary HDSDI and then HDSDI>HDMI I/O's when on paper a monitor connected via HDMI should playback correctly (which Windows Media Center does) - it also doesn't seem too much to ask for full screen playback to work 'out of the box', does it? How else are we expected to do this otherwise?
    I've filed a bug report on this but any other ideas or suggestions appreciated.
    Thanks
    Sacha Goodwin

    1. OK - From W7 Performance Info:
    More details  about my computer
    Component
    Details
    Subscore
    Base  score
    Processor
    Intel(R) Xeon(R) CPU X5670 @ 2.93GHz
    7.8
    5.9
      Determined by lowest  subscore
    Memory (RAM)
    12.0 GB
    7.8
    Graphics
    NVIDIA Quadro FX 3800
    6.9
    Gaming graphics
    4607 MB Total available graphics  memory
    6.9
    Primary hard disk
    288GB Free (465GB Total)
    5.9
    Windows 7 Enterprise
    System 
    Manufacturer
    Dell Inc.
    Model
    Precision WorkStation T7500
    Total amount of system  memory
    12.0 GB RAM
    System type
    64-bit operating system
    Number of processor  cores
    12
    Storage 
    Total size of hard  disk(s)
    465 GB
    Disk partition (C:)
    288 GB Free (465 GB Total)
    Media drive (D:)
    CD/DVD
    Disk partition (F:)
    0 B Free (39 MB  Total)
    Graphics 
    Display adapter type
    NVIDIA Quadro FX 3800
    Total available graphics  memory
    4607 MB
          Dedicated graphics  memory
    1024 MB
          Dedicated system  memory
    0 MB
          Shared system  memory
    3583 MB
    Display adapter driver  version
    8.17.11.9790
    Primary monitor  resolution
    1920x1200
    Secondary monitor  resolution
    1920x1200
    Secondary monitor  resolution
    1920x1080
    DirectX version
    DirectX  10
    Network 
    Network Adapter
    Intel(R) PRO/1000 MT Server  Adapter
    Notes 
    The gaming graphics score is based on  the primary graphics adapter. If this system has linked or multiple graphics  adapters, some software applications may see additional performance  benefits.
    Disk system doesn't apply in this case as we use an Editshare NAS.
    2. First thing I did was a clean install of W7 (Enterprise), I always start from vanilla install.
    I'm a bit unsure about your tuning guide - can you document what improvements you get after changing said settings? I note the option "Adjust Visual Effects and check Adjust For Best Performance" is one way to turn off Aero (which I've tried anyway), which whilst sort of resolving the original problem, unfortunately now causes other display issues (and also caused CS5 to crash when using the source trimmer window) so have had to switch it back.
    Turning off the services as you are suggesting seems a bit drastic just to get a plain DV clip without any FX to playback smoothly (e.g. CPU util is about 3% in these situations, network at about 5%, disk not doing anything).. it's the kind of thing I would have done about 10 years ago but modern machines are supposedly built around HD multimedia so it seems odd to still be expected to do this kind of thing now.
    FYI, this was the thread that suggested turning off Aero to fix:
    http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/d4f155d8-6ff6-4741-bb2d-8 ed184b7a45c
    Out of interest, what do other people use to get full HD preview under CS5? Is it all OK out there in NTSC land @ 60fps?
    Thanks
    Sacha.

  • Dual Monitor and Full screen playback in Color 1.0

    So, I was wondering if somebody could help me out.
    I have 2 screens, one is a 23" ACD other is a 23" dell. I am going to be color correcting with my Matrox MXO setup on the 23"ACD. Whenever I do full screen playback the waveform monitor and vectroscope and all that jazz is not available anymore (obviously because of full screen)
    So I was wondering what my options were:
    1. Setup the waveform and vector scope to show on my primary display? (if possible, I'm not sure how to do it)
    2. Do I have to get another graphics card and run three monitors?
    3. If I Color grade with full screen playback disabled am I still utilizing the MXO for grading?
    I am new to Color and how it works so I apologize if these questions seem "newbie-ish" of me.
    Thanks

    Isn't there a SINGLE MONITOR option in COLOR? Use that.
    I don't think two graphics cards will work with Color, as Color relies on the card when it comes time to render. Might mess it up, or not work.
    Shane

  • Full screen playback in PE9 garbled - anyone else see this?

    I mentioned this in a general post but I'll make it a specific question now -
    When I click on the "full screen" button near the top right of the interface, full screen playback has a corrupted area which corresponds with where the timescale is on the normal interface.  Sometimes the playback cursor "breaks through" as a black vertical line too.
    Does anyone else see this?
    I have the latest Nvidia drivers installed.  Windows XP Pro SP3 Q9300 quad core PC 2GB memory.
    Thanks for any observations.

    It's very obvious if you do have the problem - a wide strip of the video (horizontal, matching the timescale hidden beneath the full screen display) gets shifted sideways somewhat (flickering on and off), so that any vertical object in the footage gets displaced sideways at that point in an obvious juddering fashion.  I tried to do a screen grab but simply doing that makes the problem change - it is more evident when the footage is running than when frozen.
    Anyway, adjusting the Windows Display Properties "hardware acceleration" slider, moving it to the left till it is set to the point where the message beneath reads "Disable all DirectDraw and Direct3D acceleraions.  Use this setting to correct severe problems with DirectX accelerated applications" seems to fix the problem.
    Graphics card is a GeForce 8600 GT, in case that's relevant.
    At least I know how to work around the problem.  Let's see if others come across the same problem in due course.  Maybe it's just a local issue.

  • Full screen playback on second monitor results in having to force quit Premier if a window opens on the second monitor.

    Run into this problem a few times now. If I have full screen playback going to my second monitor, and then I try to do something like link media and the link media window opens on that second monitor I can't figure out a way to get to it. I end up having to force quit. Because the link media window causes all other application buttons to disable while it is open I have not been able to find a solution other than force quitting, reopen and disable full screen playback, open link media window and move it to the other monitor and then again enable full screen playback.
    Has anyone run into this? Am I missing an easy solution?

    You need to set up your Graphics Card Application first eg A and B Monitors , side by side etc.
    In my case..a  NVidea Display Application does this from the Control Panel
    Then the second monitor will appear in display setting (Premiere).
    My second monitor is entirely dedicated to full screen playback display.

  • Full Screen Playback Control Impossible Using Monitor 2 in Dual Monitor

    Recent iTunes update (patch didn't fix) causes playback control to disappear when the cursor is on the monitor showing the movie. Controls reappear when cursor is moved to first monitor. User cannot get the cursor near the control panel. Must drop out of full screen playback to touch controls with the cursor.

    Isn't there a SINGLE MONITOR option in COLOR? Use that.
    I don't think two graphics cards will work with Color, as Color relies on the card when it comes time to render. Might mess it up, or not work.
    Shane

  • Full screen playback as with 2nd screen blacked?

    I've got two Apple displays hooked up to my G5, and unlike DVD Player, which automatically blacks the second screen when I enter full screen playback, Quicktime leaves the second screen unblacked- I'm hoping I can figure out a way to get Quicktime to black the second screen as with DVD Player? As opposed to simply dimming it (since the syst. prefs don't allow for complete dim-to-black) Any other users notice this as an issue? Obviously not a soul-crushing problem, but is kinda annoying...
    Searched for previous posts on this topic, didn't see it posted already, which surprised me. But I don't see any settings in the Quicktime full screen playback settings that might address this.
    cheers,
    Jack

    Holy blackout, Batman! That did the trick- my "Full Screen" options were set to "Fit to Screen" instead of "Fill Screen", and I checked the "Background Color- show on all displays" box. Nice. Thanks much!!!

  • Toggling for Full Screen playback

    I am having no success toggling to full screen playback in Premier Pro CS6 using ctrl+` or anything else. The onmly way I can get to full screen during playback is by going to Edit/Prefernces/Playback and ticking one of the 2 monitors (or both) that I have connected. The only way of going back to small screen playback is by going into the same menu and deselecting.
    Look forward to hearing from anyone,
    Dan

    This isn't the answer you are looking for, but maybe I can help a little.
    If you look in the keyboard shortcuts and search for "playback" the one under "edit" will at least allow you to call up the window faster than using menus. I assigned Ctrl-Shift-P because I don't care about setting poster frames and I can remember the "P" for "playback".
    I don't see any way to select or deselect the monitor via the keyboard. At least not from within Premiere Pro. If you were a moderately talented programmer, there are ways to control Premiere Pro from outside of the program itself. I used to write programs to control other programs but I haven't done so since about 1994.
    Perhaps submitting a feature request would be appropriate. https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • No Full Screen Playback

    I am trying to view full screen playback but I am not seeing any AV devices under the video playback menu. When I go to view/Video Playback the only option is "None".
    I have ben able to get full screen playback with this setup as recently as today but something has changed.
    I tried a complete reinstall and that did nothing.
    I have tried refreshing A/V devices but it doesn't detect anything, not even the laptop screen.
    Any ideas?
    Message was edited by: jonmeredith

    Using FCP 7.
    I have gotten it to work a couple of times, but I am never sure what is fixing it. Restarting multiple times mixed with something else seems to do it, but then if I restart one more time after that I lose it again - the External A/V window comes up upon launching the program saying that it was unable to locate the Digital Cinema Desktop Preview.

  • Menu Bar at top will not hide during full screen playback

    URGENT!! Please help. I am playing a QT movie in version 7 on operating system 10.3.9 on an ibook. Despite selecting full screen mode the menu bar at the top will not disappear during playback. Have checked all preference settings. Any advice?

    I am having the same problem. I have an iBook with system 10.3.9 running the newest version of QT. It worked at first, but then I used the menu once during a fullscreen play and the menu hasn't hidden since. And no, my cursor isn't stuck at the top of the screen.

  • Full screen playback won't play from the playhead

    Hi all,
    I'm using I-Movie 11.  When I try to play in full screen (either by using cmd+G or going through the 'view' menu) it will not play from where the playhead is.  Instead it seems to start from random clips in my event.  If I am already watching part of an event and then try to move to watching in full screen, this also happens and the playback jumps back to a random point.
    It used to work fine and I don't have this problem if trying to view a project. Does anyone have any clues about why this might have happened or how I might fix it?
    Thanks,
    Jen

    The problem was resolved just by restarting the computer.  My son read elsewhere that the video player may have been trying to run in 64 bit mode while his older OS X is in 32 bit mode.  Restarting seemed to reset it.

  • Full screen playback of Keynote stutters, fine windowed

    When playing back the 9/5 Keynote, the video stutters in full-screen only. It appears every 2 seconds or so to play a previous frame. So, for example, if Steve is walking across the stage, every 2 steps, he'll appear to take one back .
    This doesn't occur when the video is windowed, either at original size, or double size, and I can even use the mouse zoom trick to effectively make it fullscreen, and it's still smooth.
    It's pretty annoying. I'm using the latest Quicktime (7.2.something) and Mac OS and everything else that SW update gives you as of today.
    Thanks for any advice.

    I tried reverting to QT 7.1.6 to fix the issue and ended up royally screwing up OS X in the process. I did an archive and reinstall, keeping my settings.
    That put QT 7.0.4 on, and after updating everything except QT, the problem has gone away.
    I haven't tried moving up to 7.1.6 or 7.2.0 again, so I'm not sure if the old QT solved the problem or the reinstall of OS X solved the problem.

  • Problem with full screen playback

    Everything works fine until I go to preview in full screen. I hit the space bar to play the viewer and nothing happens. If I move the mouse over to where the play button is in the viewer window before the screen goes full and click where it was, it will play.
    The spacebar works fine when not in full screen mode. Any ideas?
    Im running FCE 3.0 in a PB 1.5 ghz with 2 gigs of ram running 10.4.8. I have not changed anything about my system that i know of (except the normal updates) since i did my last project last year and the full screen worked fine then.
    Thanks for any help.
    John

    By previewing fullscreen on your Powerbook, you're stretching video that is 720x480 to fit a 1280x854 screen. Recipe for ugliness.
    I'd recommend just setting your Canvas to 100% and viewing it at native resolution.
    I saved a different window layout for this on my Powerbook. It has a keyboard shortcut assigned to it, so I have one layout for basic editing, and another layout to blow it up to 100% for viewing.

  • Images in FCP X 10.0.8 - blurry on full screen playback

    I'm trying to create a documentary of around 30 mins using both photos (Ken Burns effect) and video clips.  Settings are as follows:
    I have around about 580 photos all cropped in PS6 to 1700 x 900 px.  Won't be using many of them but have them imported just in case.  The video clips show beautifully on full screen preview, however, the photos are blurred and jagged.  When I tap the space bar and freeze the image, however, they preview just fine.  I have only created around 6 mins at this stage so I tried making a DVD of that portion and there was no problem with the photos showing sharply as they should.  This is rather discerting to say the least and I am a little hesitant to continue until I get some professional advice.  Is this a problem with something I have or have not done in cropping/resizing the images (they are all around about 5 mbs and many taken from CR2 files) or is this a problem with this version of FCP X 10.0.8?  Has anybody else experienced this problem?  And since the 6 mins rendered and created a final DVD without any problem should I just proceed as is?  Finally, I am using a MacBook Pro 15in - now 2 years old if that should make any difference.
    Thanking you,
    Mitaka27
    Tokyo

    Thank you so very, very much. Changing that preference solved the problem.  What a relief.
    Mitaka27

  • Screen Changes With Full Screen Playback Over HDMI

    Any one know if this is the best way to report a flash issue to the development team?
    Home Theater PC connected to a Sony  Bravia Television via HDMI
    Issue is that when the Flash content is played back on full screen, the Television flickers and displays a 'scene changed' anytime the mouse cursor appears or disappears. Happens in IE, Firefox, and Chrome.  This problem began with the latest version of Flash player. 

    I have been trying to get this to work too.
    Seems an obvious void with many of us trying to have both audio and video in a playlist!
    Apple, please make it so visualizer plays while a song is playing but a video will play full screen if it's a music video! Please?

Maybe you are looking for

  • What video format do I send a client in France?

    What video format do I send a client in France?

  • Opening Bank Reconciliation

    In order to ensure that your client is able to perform their first bank reconciliation correctly, you need to perform the following steps: First we'll create an example: Opening Cashbook (General Ledger) balance           = $100 Dr (Favorable) Oustan

  • Remove white background from an outlined photo

    I'm going crazy. I have a photo with a clipping path done in Photoshop CS3. All I want to do is place the photo in Illustrator CS3 on top of a colored background but every time I try, I get a white box around the photo. I've tried dragging from the P

  • Enabling guest/anonymous user accesss using sun access manager(opensso 8.0)

    Hi, How to enable anonymous/guest user login through opensso? In otherwords, if I try to access my application protected by opnesso, the user should be not be redirected to opensso login page automatically. Instead the user can see the content which

  • Error 10846 after running VI for a day

    I am trying to develop a program that acquires data continuously from 9 analog input channels, then processed the data to extract the mean, max, min for each signal and do some calculation and then store the data in a spreadsheet every minute. The VI