Function modules not found....

Hello,
I found the following errors in my SDCCN logs, I have googled and also searched in SAP market place and even in SDN but no help. Also the EWA shows the same in Missing Function Module column.Please help in this regards.
Thanks and Regards,
Yoganand.V
Errors:
1) EWA_MAIN_BUSINESS_HOURS : no matching interface found
    function module not found
    EWA_MAIN_BUSINESS_HOURS : funcname /SDF/MAIN_BUSINESS_HOURS , module 000156
2) READ_RFC_LIST : # of imp params in funcmod < # of imp params in mod 000152
    READ_RFC_LIST : inconsistency in # of imp params found for mod 000152
    READ_RFC_LIST : non-default imp param IF_ANONYMIZE is not passed to mod 000152
    READ_STAMP : no matching interface found
    function module not found
    READ_STAMP : funcname /BDL/READ_STAMP , module 000153

Hi,
EWA_MAIN_BUSINESS_HOURS
READ_RFC_LIST
READ_STAMP
are three new function modules which will be supplied with the next version of ST-PI. The next version of ST-PI is currently scheduled to be released in mid December. For the moment, the only thing to do is to ignore those errors until the next ST-PI becomes available.
best regards,
-David.

Similar Messages

  • Error Function module " " not found in Smartforms

    Hi all,
    Please help me out….
    I created the form using the smartforms, check it and activated it. I can see the unique function module is assigned to the form. I wrote the ABAP program and use function module ‘SSF_FUNCTION_MODULE_NAME’and also define data types.
    when I called the function module fm_name for passing values and tables from program to smartform. This is working perfectly in development server but in production it giving error like Function module " " not found.
    Below I m pasting my code.
    *& Report  ZCASHJOURNAL                                                *
    REPORT  zcashjournal                            .
    TABLES: bseg.
    DATA: FM_NAME TYPE rs38l_fnam.
    DATA:BEGIN OF it_bseg OCCURS 0.
            INCLUDE STRUCTURE bseg.
    DATA:END OF it_bseg.
    DATA:BEGIN OF it_bseg1 OCCURS 0.
            INCLUDE STRUCTURE bseg.
    DATA:END OF it_bseg1.
    DATA: gv_amt_in_words TYPE spell,
          gv_word TYPE spell-word,
          gv_decword TYPE spell-decword.
    DATA:BEGIN OF gt_bkpf OCCURS 0.
            INCLUDE STRUCTURE bkpf.
    DATA:END OF gt_bkpf.
    DATA:bktxt TYPE bktxt.
    DATA:waers TYPE waers.
    DATA:belnr TYPE belnr_d.
    DATA:werks TYPE bukrs.
    DATA:desc  TYPE butxt.
    DATA:awkey TYPE awkey.
    DATA:docno TYPE matnr.
    DATA:cajo  TYPE awkey.
    DATA:desc1 TYPE butxt.
    DATA:dmbtr TYPE dmbtr.
    SELECTION-SCREEN BEGIN OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT (15) FOR FIELD s_belnr.
    SELECTION-SCREEN POSITION 28 .
      PARAMETERS : s_belnr TYPE bseg-belnr .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
      SELECTION-SCREEN COMMENT (15) FOR FIELD s_werks.
        SELECTION-SCREEN POSITION 28 .
          PARAMETERS: s_werks TYPE werks.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK b2.
    SELECT * FROM bkpf
               INTO CORRESPONDING FIELDS OF TABLE gt_bkpf
              WHERE belnr LIKE s_belnr
              AND   bukrs LIKE s_werks.
    IF NOT gt_bkpf[] IS INITIAL.
      SELECT * FROM bseg
          INTO CORRESPONDING FIELDS OF TABLE it_bseg
          FOR ALL ENTRIES IN gt_bkpf
          WHERE bukrs EQ gt_bkpf-bukrs
          AND   belnr EQ gt_bkpf-belnr
          AND   shkzg EQ 'S'.
    ENDIF.
    LOOP AT gt_bkpf.
      bktxt = gt_bkpf-bktxt.
      waers = gt_bkpf-waers.
      belnr = gt_bkpf-belnr.
      werks = gt_bkpf-bukrs.
      awkey = gt_bkpf-awkey.
      docno = awkey+0(10).
      cajo = awkey+10(4).
    ENDLOOP.
    LOOP AT it_bseg.
      dmbtr = it_bseg-dmbtr.
    ENDLOOP.
    IF s_werks EQ '65'.
      desc = 'JCBML - Heavy Equipments'.
    ENDIF.
    IF cajo EQ '0001'.
      desc1 = 'PETTY CASH PLANT II'.
    ENDIF.
    CALL FUNCTION 'SPELL_AMOUNT'
      EXPORTING
        amount    = dmbtr
        currency  = waers
        filler    = space
        language  = sy-langu
      IMPORTING
        in_words  = gv_amt_in_words
      EXCEPTIONS
        not_found = 1
        too_large = 2
        OTHERS    = 3.
    IF sy-subrc EQ 0.
      MOVE : gv_amt_in_words-word TO gv_word,
             gv_amt_in_words-decword TO gv_decword.
    ENDIF.
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname                 = 'ZCASHRECPT'
    IMPORTING
       FM_NAME                  = FM_NAME
    EXCEPTIONS
       NO_FORM                  = 1
       NO_FUNCTION_MODULE       = 2
       OTHERS                   = 3
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    *CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
            EXPORTING  formname           = 'ZCASHRECPT'
                    variant            = ' '
                    direct_call        = ' '
            IMPORTING  fm_name            = lf_fm_name
            EXCEPTIONS no_form            = 1
                       no_function_module = 2.
    *v_vbeln = S_VBELN-low.
    CALL FUNCTION FM_NAME
      EXPORTING
        bktxt            = bktxt
        waers            = waers
        belnr            = belnr
        werks            = werks
        desc             = desc
        docno            = docno
        cajo             = cajo
        desc1            = desc1
        dmbtr            = dmbtr
        gv_word          = gv_word
      TABLES
        T_ZDEB           = it_bseg
      EXCEPTIONS
        formatting_error = 1
        internal_error   = 2
        send_error       = 3
        user_canceled    = 4
        OTHERS           = 5.
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

    Hi Rakesh,
    Check two things
    1. Program tranpsorted to production without any error in request log.
    2. Smartform tranpsorted to production without any error in request log and without renaming / misspelling it.
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
    formname = 'ZCASHRECPT'
    IMPORTING
    FM_NAME = FM_NAME
    EXCEPTIONS
    NO_FORM = 1
    NO_FUNCTION_MODULE = 2
    OTHERS = 3
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Also try to uncomment the Message id part and it will show some meaningful message.
    And to check whether actaually fucntion module is generated or not goto smartforms ->Smartform name -> Display -> Environment->Fucntion module name . if this is blank try to retransport smartform.
    Hope that helps.
    Regards
    Kapadia
    ***Assigning points is the way to say thanks in SDN.***

  • SMQ2 SYSFAIL - Function Module not found

    Hi All,
    When i am trying to push data to cdb i got sysfail - Function module not found error in the smq2. But data inserted in the cdb, the probelm we found was the data object having the dependency cause this error.
    The data was there in the cdb, but no distribution entries found.
    Please help me to resolve the same.
    Regards,
    Ramkumar

    Hi,
    Clear the queue first (delete it), then implement the NOTE 1552255 - 'Parallel load problem for partial association shadow'. Run the report mentioned in the NOTE and  do a delta generation.
    Then on doin a delta load the queues should run successfully.
    regards,
    Anil

  • Function Module not found in SRM 7.0 -CRM_ORDERADM_H_SELECT_BUF_M_DB

    Hi Masa/Muthu/Viru ,
    We  have upgraded from SRM 3.0 to SRM 7.0.
    we have copied the ZUS2000113 from Business object BUS2000113 for Contract workflow.
    In SRM 7.0 the above   Function Module not found in SRM 7.0 -CRM_ORDERADM_H_SELECT_BUF_M_DB.
    Can you telll which is the replacement of this FM
    Regards
    G.Ganesh Kumar

    Hello,
    What is the aim of FM name you gave us ?
    What is its function group ?
    With those data, it could be easier to find an existing one with same goal in SRM 7.0 release .
    Regards.
    Laurent.

  • G_G_IDOC_REC_ZZINCOT function module not found in ECC 5.0

    i am getting the dump.
    the fuction module is not presend in ECC 5.0
    Runtime Errors         CALL_FUNCTION_NOT_FOUND                                                     
    Exceptn                CX_SY_DYN_CALL_ILLEGAL_FUNC                                                 
    Date and Time          04/05/2007 07:13:25                                                         
    ShrtText                                                                               
    Function module "G_G_IDOC_REC_ZZINCOT" not found.                                             
    What happened?                                                                               
    The function module "G_G_IDOC_REC_ZZINCOT" was called, but cannot be                          
        found in the Function Library.                                                                               
    Error in ABAP application program.                                                                               
    The current ABAP program "SAPLGUIF" had to be terminated because one of the                   
        statements could not be executed.                                                                               
    This is probably due to an error in the ABAP program.                                         
    What can you do?                                                                               
    Print out the error message (using the "Print" function)                                      
        and make a note of the actions and input that caused the                                      
        error.                                                                               
    To resolve the problem, contact your SAP system administrator.                                
        You can use transaction ST22 (ABAP Dump Analysis) to view and administer                      
         termination messages, especially those beyond their normal deletion                          
        date.                                                                               
    is especially useful if you want to keep a particular message.                                
    Error analysis                                                                               
    An exception occurred. This exception is dealt with in more detail below                      
        . The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_FUNC',                
         was neither                                                                               
    caught nor passed along using a RAISING clause, in the procedure                              
         "IDOC_INPUT_GLROLL" "(FUNCTION)"                                                             
    Since the caller of the procedure could not have expected this exception                      
         to occur, the running program was terminated.                                                
        The reason for the exception is:                                                              
        The program "SAPLGUIF" contains a CALL FUNCTION statement. The name                           
        of the function module to be called is "G_G_IDOC_REC_ZZINCOT".                                                                               
    No function module exists with the name "G_G_IDOC_REC_ZZINCOT".                               
        All function modules are stored in the Function Library (SE37).                                                                               
    Possible reasons:                                                                               
    a) Wrong name specified. Particular attention should be paid                                  
           to upper/lower case and underscores ("_")                                                  
        b) Transport error                                                                               
    c) If an enqueue/dequeue module has been used, the lock object                                
           may not have been activated (ABAP Dictionary)                                              
           may not have been activated (ABAP Dictionary).                                             
    How to correct the error                                                                               
    Check the last transports to the R/3 System.                                                  
        Is the program "SAPLGUIF" currently being changed?                                            
        If an enqueue/dequeue module is involved, is the activation                                   
        of the lock object missing in the ABAP/4 Dictionary?                                                                               
    You may able to find an interim solution to the problem                                       
        in the SAP note system. If you have access to the note system yourself,                       
        use the following search criteria:                                                                               
    "CALL_FUNCTION_NOT_FOUND" CX_SY_DYN_CALL_ILLEGAL_FUNCC                                        
        "SAPLGUIF" or "LGUIFU05"                                                                      
        "IDOC_INPUT_GLROLL"                                                                               
    Function modules with names similar to "G_G_IDOC_REC_ZZINCOT":                                                                               
    G_G_IDOC_REC_COFIT                                                                               
    G_G_IDOC_REC_FILCT                                                                               
    G_G_IDOC_REC_ECMCT                                                                               
    G_G_IDOC_REC_GLPCT                                                                               
    G_G_IDOC_REC_GLT0                                                                               
    G_G_IDOC_REC_SECURE                                                                               
    G_POSTING_ZZINCOT                                                                               
    G_G_IDOC_SEND_COFIT                                                                               
    G_G_IDOC_SEND_ECMCT                                                                               
    G_G_IDOC_SEND_SECURE                                                                               
    If you cannot solve the problem yourself and you wish to send                                 
        an error message to SAP, include the following documents:                                                                               
    1. A printout of the problem description (short dump)                                         
           To obtain this, select in the current display "System->List->                              
           Save->Local File (unconverted)".                                                                               
    2. A suitable printout of the system log                                                      
           To obtain this, call the system log through transaction SM21.                              
           Limit the time interval to 10 minutes before and 5 minutes                                 
           after the short dump. In the display, then select the function                             
           "System->List->Save->Local File (unconverted)".                                                                               
    3. If the programs are your own programs or modified SAP programs,                            
           supply the source code.                                                                    
           To do this, select the Editor function "Further Utilities->                                
           Upload/Download->Download".                                                                               
    4. Details regarding the conditions under which the error occurred                            
           or which actions and input led to the error.                                               
        The exception must either be prevented, caught within the procedure                           
         "IDOC_INPUT_GLROLL"                                                                               
    "(FUNCTION)", or declared in the procedure's RAISING clause.                                  
        To prevent the exception, note the following:                                                 
    System environment                                                                               
    SAP Release.............. "640"                                                                               
    Application server....... "d48ix100"                                                          
        Network address.......... "151.162.153.62"                                                    
        Operating system......... "AIX"                                                               
        Release.................. "5.3"                                                               
        Hardware type............ "00C65EFD4C00"                                                      
        Character length......... 8 Bits                                                              
        Pointer length........... 64 Bits                                                             
        Work process number...... 2                                                                   
        Short dump setting....... "full"                                                                               
    Database server.......... "d48ix100"                                                          
        Database type............ "ORACLE"                                                            
        Database name............ "D48"                                                               
        Database owner........... "SAPR3"                                                                               
    Character set............ "en_US.ISO8859-1"                                                                               
    SAP kernel............... "640"                                                               
        Created on............... "Nov 5 2006 20:46:58"                                               
        Created in............... "AIX 1 5 00538A4A4C00"                                              
        Database version......... "OCI_920 "                                                                               
    Patch level.............. "156"                                                               
        Patch text............... " "                                                                               
    Supported environment....                                                                     
        Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE                        
         10.2.0.."                                                                               
    SAP database version..... "640"                                                               
        Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"                                                                               
    Memory usage.............                                                                     
        Roll..................... 16128                                                               
        EM....................... 8379856                                                             
        Heap..................... 0                                                                   
        Page..................... 16384                                                               
        MM Used.................. 2530176                                                             
        MM Free.................. 1657232                                                             
        SAP Release.............. "640"                                                                               
    User and Transaction                                                                               
    Client.............. 010                                                                      
        User................ "OS0730"                                                                 
        Language key........ "E"                                                                      
        Transaction......... "YICUPLD "                                                               
        Program............. "SAPLGUIF"                                                               
        Screen.............. "SAPMSSY0 1000"                                                          
        Screen line......... 6                                                                        
    Information on where terminated                                                                   
        The termination occurred in the ABAP program "SAPLGUIF" in "IDOC_INPUT_GLROLL".               
        The main program was "Y21091IRECON ".                                                                               
    The termination occurred in line 65 of the source code of the (Include)                       
         program "LGUIFU05"                                                                               
    of the source code of program "LGUIFU05" (when calling the editor 650).                       
        Processing was terminated because the exception "CX_SY_DYN_CALL_ILLEGAL_FUNC"                 
         occurred in the                                                                               
    procedure "IDOC_INPUT_GLROLL" "(FUNCTION)" but was not handled locally, not                   
         declared in the                                                                               
    RAISING clause of the procedure.                                                              
        The procedure is in the program "SAPLGUIF ". Its source code starts in line 5                 
        of the (Include) program "LGUIF$05 ".                                                         
    Source Code Extract                                                                               
    Line  SourceCde                                                                               
    35                                                                               
    36 *Prüfen, ob Customizing richtig eingestellt ist                                             
       37     CHECK EXIT IS INITIAL.                                                                  
       38     PERFORM CHECK_CUSTOMIZING USING IDOC_NUMBER.                                            
       39                                                                               
    40 *Für Einzelposten neue Belegnummern vergeben                                                
       41     CHECK EXIT IS INITIAL.                                                                  
       42     PERFORM NEW_DOCUMENT_NUMBER USING IDOC_NUMBER                                           
       43                                       IDOC_CONTRL-MESTYP.                                   
       44                                                                               
    45 *Füllen der Segmentdaten                                                                    
       46     CHECK EXIT IS INITIAL.                                                                  
       47     CLEAR IDOC_SEGMENT. REFRESH IDOC_SEGMENT.                                               
       48                                                                               
    49     LOOP AT IDOC_DATA WHERE DOCNUM EQ IDOC_NUMBER.                                          
       50       IDOC_SEGMENT = IDOC_DATA.                                                             
       51       APPEND IDOC_SEGMENT.                                                                  
       52     ENDLOOP.                                                                               
    53                                                                               
    54 *Name des zu rufenden Funktionsbausteines ermitteln                                         
       55     ROL_FUNCNAME = 'G_G_IDOC_REC_$'.                                                        
       56     PERFORM BUILD_ROL_FUNCNAME USING IDOC_NUMBER ROL_FUNCNAME.                              
       57                                                                               
    58 *Funktionsbaustein zum Empfangen des IDOC's aufrufen                                        
       59 *Wenn Sender 4.0 System -> Nimm' TAB30, sonst altes TAB                                     
       60     IF NOT E1GLTTF-TAB30 IS INITIAL.                                                        
       61       L_TAB30 = E1GLTTF-TAB30.                                                              
       62     ELSE.                                                                               
    63       L_TAB30 = E1GLTTF-TAB.                                                                
       64     ENDIF.                                                                               
    >>>>>     CALL FUNCTION ROL_FUNCNAME                                                              
       66          EXPORTING                                                                          
       67               MESTYP             = IDOC_CONTRL-MESTYP                                       
       68               DOCNUM             = IDOC_NUMBER                                              
       69               TAB                = L_TAB30                                                  
       70          TABLES                                                                               
    71               IDOC_SEGMENT       = IDOC_SEGMENT                                             
       72               IDOC_STATUS        = IDOC_STATUS                                              
       73               RETURN_VARIABLES   = RETURN_VARIABLES.                                        
       74                                                                               
    75   ENDLOOP.                                                                               
    76                                                                               
    77 *Keine IDOC's empfangen                                                                     
       78   IF SY-SUBRC NE 0.                                                                         
       79     RAISE WF_ERROR_PROCESS.                                                                 
       80   ELSE.                                                                               
    81 *Prüfen, ob Fehler bei der Verarbeitung der IDOCs aufgetreten sind                          
       82     LOOP AT IDOC_STATUS WHERE MSGTY = 'A'                                                   
       83                            OR MSGTY = 'E'.                                                  
       84       EXIT.                                                                               
    Contents of system fields                                                                         
    Name     Val.                                                                               
    SY-SUBRC 0                                                                               
    SY-INDEX 0                                                                               
    SY-TABIX 2                                                                               
    SY-DBCNT 1                                                                               
    SY-FDPOS 0                                                                               
    SY-LSIND 0                                                                               
    SY-PAGNO 0                                                                               
    SY-LINNO 1                                                                               
    SY-COLNO 1                                                                               
    SY-PFKEY                                                                           &

    I think that the FM is a customized one. Correct me if I am wrong. It is quite possible that certain FM's might have been missed out while the new system is built. Here I am assuming that the you are doing an upgrade.
    If whatever, I've mentioned above is correct, you can copy the FM and its other components from the old system into the new one, to rectify the error

  • CDMC - Function Modules not Found

    Hi,
    Initially the Solution manager ST level is 23 and CDMC clearning analysis worked will with ERP satellite system.
    Later, Solution manager has upgraded with 24 and not able to actiavate the statistics and unable to perform clearning analysis.
    Below are 2 known errors(there could be more),
    Function Modules "CNV_CDMC_CC_GET_COMPS_OF_SYS" and "CNVCDMC_OBJECT_EXISTENCE_CHECK" not found.
    Did any face this similar issues ?
    Do we need to consider any component upgrade at Satellite systems  with respect these upgrades in solution manager ?
    Note: 3 of components are upgraded in solution manager which are ST , ST-A/PI and ST-SER...
    Regards,

    Hello,
    If you are on ST-PI SP03 this note is needed in all the participating systems of your CDMC project
    1509340 - Collective Note with all corrections for CDMC (ST-PI SP03)
    Also pleae review SAP Note 1348772 -  CDMC Corrections - Composite SAP NotePlease look under Solution for Support Package 03 relevant Notes:
    This will ensure that your system works without errors!
    Regards,
    Paul

  • Error "Function module  not found."

    Hi,
    I am calling RFC_GET_MATERIAL_DATA but I got this error "Function module "RFC_GET_MATERIAL_DATA" not found". What does it mean? How I can solve this error?
    Thank you in advance,
    Sunny

    Well I think it simply means that the Function Module does not exist in the system where it needs to get executed.
    First check if you are calling this FM remotely ( with a DESTINATION specification ). Then ensure that the FM exist in the DEST system (SE37).
    if you are not calling it remotely, then check if the FM exist in your local system.Just check in SE37.
    Reason it might not be available in the system is because of the version , or say product type ( R/3, CRM, EBP, BW... ).
    Thanks,
    Ram

  • Connection error to SAP InfoSets/Queries 'Function module not found'

    I have crystal reports 2011 and I would like to connect to our SAP system (ECC6.0).  I am able to connect partially but when I drill down into where I guess crystal is trying to pull a list of queries or infosets I get errors.
    For infosets i get 'Function module "/CRYSTAL/GET_FUNCAREA_CATALOG" not found.'
    For queries i get 'Function module "/CRYSTAL/GET_QUERY_CATALOG" not found.'
    What changes need to be performed to our SAP system to get these functions added?
    Thanks in advance.

    Hi Joshua,
    I did some checking so I changed my original reply. Those drivers are installed so nothing extra needed. I'm not completely sure how all of the Classic SAP data sources work but the only thing different is BW Query was removed in favor of MDX.
    Also, the Transports are in a download package and must be installed onto the BW system. I'm checking what that means and where they are located.
    The package for the BW server is located here:
    <folder where I unzipped>\DATA_UNITS\CrystalReports\Collaterals\Add-Ons\SAP\Transports
    Thanks again and sorry for the confusion...
    Don
    Edited by: Don Williams on Jul 11, 2011 10:59 AM

  • Function Module Not Found

    Hi Experts, i'm getting this dump "Function Module 'RSA1_DSOURCE_ALL_D_GET' Not Found", obviously i don't have this FM in the R3 system, but when i debug the program that make the call this value came in a variable, from what i know it maybe something with the not unicode system, does anyone can help me??

    Yes, I have a RFC call in both (r3 and bw) and they work ok.
    Thanks for you reply.

  • Smartforms.. Function Module not found.. fm_name when tried in the SE38

    Hi all,
    I created the form using the smartforms, check it and activated it.  I can see the unique function module is assigned to the form.  I wrote the ABAP program and declared the data types, but when I called the function module fm_name, the system is saying that fm does not exits..My program looks like this in short:
    data fm_name type rs38l_fnam.
    parameter: p_form   type tdsfname   default 'zashok01'.
    where Zashok01 is the form name.
    print data
      call function 'SSF_FUNCTION_MODULE_NAME'
           exporting  formname           = p_form
                    variant            = ' '
                    direct_call        = ' '
           importing  fm_name            = fm_name
           exceptions no_form            = 1
                      no_function_module = 2
                      others             = 3.
    now after this, when I am calling the function module fm_name to get the generated FM for the form, the system gives a note that FM does not exits..
    Can anyone find me the result.. Do I need to create a new FM or what??? or is there anything wrong with my codes to assign the name of FM.
    Waiting for your replies..
    Regards,
       -Ashok Hansraj

    hi,
    correct the following things
    1. parameter: p_form type tdsfname default 'ZASHOK01'.
    2. check fm name in Smartform - > Environment - > function module name
    3. copy name of the function module and call from the program like
    CALL FUNCTION '/1BCDWB/SF00000003'
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
    then replace '/1BCDWB/SF00000003' to fm_name like below
    CALL FUNCTION fm_name
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
    cheers,
    sasi

  • Delta loading through Generic extractor - function module not found

    Hi,
    I'm working on a BW3.5 system and we have some generic delta FM extractors. One of these is called ZBW_CONF_DELTA and the FM is also called ZBW_CONF_DELTA. It is a delta-enabled extractor. Whenever an extraction is done in the init delta mode, the data gets picked up from SAP.
    However, whenever we load subsequent deltas, the extractor brings zero records. When I look in the SM37 logs in R/3, it says "Function module /BIC/QIZBW_CONF_DELTA0001 does not exist"
    I'm not sure where the "/BIC/QIZBW_CONF_DELTA0001" function module name came from, because I haven't given it like that (if I did, the init load would also have failed).
    Due to this problem, I'm unable to perform any delta loads. Is there anything I could be doing to fix this?
    Regards

    Hi,
    First check how extractor works in R/3 side using RSA3
    Make a full load.
    Now check the generic delta field of your generic extractor, lets say changed on date.
    Do the SAP transaction ( take help from some Functional COnsultant ) to update that delta field. Note that record.
    Now if u do the delta load with same extractor, you are suppose to get that record.
    If not then there is some problem with FM or extracor.
    Let me know what happens.
    Thank-You.
    Regards,
    Vinod

  • Function module not allowed: AFS_RETAIL_ARTMAS_IDOC_INPUT.

    Dear Expert,
       I have a problem when I use ALE. I found error message of inbound in target system have a error status 51. Function module not allowed: AFS_RETAIL_ARTMAS_IDOC_INPUT.
    message type is MATMAS. and i want to distribute Material master from 1 system to another system.
    Process code: AFSA
    This below is my config.
    Process code                         AFSA
    My process code Identification.
    Function module : AFS_RETAIL_ARTMAS_IDOC_INPUT
    Maximum number of repeats 0
    Object type                         IDOCARTMAS
    End event                           MASSINPUTFINISHED
    Object type                         IDOCARTMAS
    Start event                         INPUTERROROCCURRED
    End event                           INPUTFINISHED
    How to do this?
    thanks,
    Sak
    Edited by: Pongsak Ruangsongkhram on Dec 24, 2007 8:59 AM

    Pls make sure the following config in we42.
    Process code                         MATM                                                                               
    Function module                     IDOC_INPUT_MATMAS01 IDOC_INPUT_MA      
    Maximum number of repeats                                                                               
    Object type                         IDPKMATMAS                             
    End event                           MASSINPUTFINISHED                                                                               
    Object type                         IDOCMATMAS                             
    Start event                         INPUTERROROCCURRED                     
    End event                           INPUTFINISHED                                                                               
    Object type                         BUS1001                                
    Start event                                                                               
    Cheers!

  • Function module not in Function group after transport

    We have a function group ZPCAD with three function modules in it. I added two  function modules. When they were transported, the function group in the target client did not show the function modules
    I found the program in SE80 Repository info System. when I opened the Module got a message about funtion group being damaged.
    Since then, we have:
    transported the modules again. that did not help
    transported the Function group, that did not help
    Transport all function modules (old and new), that did not help.
    I went to SE37, opened the module and pressed Control, Shift, F5. The function group ZPCAD was opened indicating the module is part of the group. However, the new function modules still were not listed in the group.
    Any advice would be appreciated.
    Scott

    Some time function modules will not be displayed in function group in target systems.
    Goto SE80
    Select the function group from the list box and search for the function group.
    Right click on the functio group and select "Other Functions" and "Rebuild Object List" from the sub menu of "Other Functions".
    After doing all these, function modules will be displayed in function group.
    Regards,
    Siva.

  • Function Module not working for old Role

    Dears
    Function Module not working for old Role
    Function Module: /VIRSA/BAPI_AE_USERS_FOR_ROLES
    Before EHP4 upgrade this functional module working fine, but after updated users are not visible.
    We have chekced if the users are assigned directly users are visible but indirect (Position Based) assignment users are not apprearing.
    Pl check the fucntion module with given roles below and identify the root cause,
    EP_TRVL_ALL_CAB     - Old Role
    EP_TRN_TRVL_DRGC_V2 - New Role
    Regards
    Krishna Mohan CH
    9704500717

    Krishna,
    I do not think this BAPI is meant to be called by anyone but the application using it, and its functionality may therefore change without notice.
    What are you trying to achieve? Maybe there's a better way to do that...
    Frank.

  • "Module not found" in Apple Mail

    Hi all,
    Many times when I edit a new message in Apple Mail, images do not appear after I drag them to the new email. Instead, a sentence appears. My System is in Spanish language and I haven't had the chance to see it in English but it is something like "Module not found".
    This message, instead of attached images, appears randomly so it's very difficult for me to say why is this happening. It happens in some emails I receive so I have to ask them to send them over again. In some emails received with this problem, the images appear time after if I check them back again.
    I deleted and added again my email accounts, but this didn't help. I use MobileMe and Gmail.
    If someone in this forum can help me or has got a clue about this, is very frustrating as I'm a graphic designer and there are attached images in almost every email I send or receive.
    Thanks a lot!

    Hola Carola! 
    That's what I'm talking about! I work as a Graphic Designer and it's quite absurd how I can not appreciate the images my clients send me to show changes or reviews inside the email's body.. it's not just sending but reading the images the issue remains.
    You like me (as many) don´t have enought time to reset or re-install the entire operative system (where the Apple mail is packaged) to fix such a basic problem.
    Apple had closed other discussions like this one with no response.
    -La verdad no entiendo que exista este detalle tan básico para un ordenador hecho para el sector creativo-
    Estoy creando un hashtag en twitter #modulenotfound a ver si consigo algo por ahi.. Saludos desde Madrid

Maybe you are looking for

  • Why is no free trial available?

    I need to download a free trial of Dreamweaver for Windows (PC) to do an important project for a college class, but I can't find a free trial. It looks like a new version of Dreamweaver (CS5) is coming out soon, so I can't find the CS4 trial anywhere

  • Another I don't what to do to get BT to sort it ou...

    On Wednesday morning we lost our BT Broadband connection. I figured this was something to do with the engineers doing the cabling work in our village ready for the imminent launch of Infinity so phoned up BT who had me carrying out allsorts of things

  • Search Algorithm in Java

    Hey Guys, I have written a crude search algorithm which extracts 4 fields from a database table into the String type of Java. Then this String object is tokenized and then within these tokens I search for the text the user has used. Once, I faced thi

  • Apple TV connection test?

    Lastest Apple TV device. I'm not seeing any proof of conection between computers systems other than being able to use the  iTunes store and Netflix. There is no sign of a Apple TV tab or Airplay logo in my preferences or on any of my devices. I've ru

  • Content Activation Problem

    Hi, I have a problem in activation business content for some BI infoobjects. We have upgraded from BI 3.5 to 7.0. But some of the objects are not activated. So i was trying to reactivate them and following are my concerns. If i consider revised versi