Functional Area in Line Item Display FBL3N

Dear Expert,
My system is running on ECC6.0 and functional area is activated.
I would like to see the Functional Area in Line Item Display (FBL3N) but couldn't get it in any field selection (change layout).
I have added the field in the GL Accounts> Line Items> Define Special Field for line item display as BSEG - FKBER_LONG
But I still couldn't get the functional area for each line item in the Line Item Display.
Please advise. Many thanks.

Dear Please Configure Through Below Path, You will get Line item wise Functional Area:-
Financial Accounting (New)>Accounts Receivable and Accounts Payable>>Vendor Accounts>> Line Items >>Display Line Items> Define Special Field for line item display as BSEG - FKBER
Regards,
Viswa

Similar Messages

Vendor name not showing correctly in TDS GL line item display fbl3n

Hi Gurus,
I am facing an issue in regards to TDS. As you know that normally we make a cheque payment to a vendor, we issue one cheque for one vendor.
But my client follows a slightly different practice. Suppose they have to pay an amount of 30000 to three vendor A B C equally 10000 each. They right a self cheque to the SBI bank and also send them the list of these 3 vendors who are also having their account in the same bank. They instruct the bank to take money from their account and then credit in the respective vendors account.
Now the transaction goes like this:
Vendor A   10000
Vendor B    10000
Vendor C   10000
    To Bank                 29700
    To TDS on A              100
    To TDS on B              100
    To TDS on C              100
Now when the user will go to FBL3N and check the TDS GL 100020196 and see the line items it should show like as per the client:
Vendor A       100
Vendor B       100
Vendor C       100
But it shows the below result:
Vendor A   100
Vendor A   100   ( should be vendor B)
Vendor A   100   (should be vendor C)
I believe that is the standard behavior of the system to show the vendor line. They do not want to change the way of their posting and their concern is if it shows like the same at the time of return filing how will know vendor wise tds.
Now either I need to resolve this situation in FBL3N or give them a report which should give them Vendor wise TDS information for the TDS filing.
J1INMIS report is there but it shows only the TDS and the vendor number, it does not give the vendor name. I either want a solution of this issue in FBL3N or a report which shows vendor wise TDS with vendor number and name. Please let me know if there is a solution to this issue.
Kindly consider this very urgent. I am attaching the relevant screenshots.
Thanks
Urmila

Hi
Unfortunately there is no report in SAP other than J1INMIS which caters to Indian reporting requirements. You can think of enhancing the same.
Also check your enhancement for FBL3N as to why it is not working as it should with the help of your ABAP Colleagues. It is not displaying the name correctly.
Thanks & regards
Sanil Bhandari

Assignment Number in GL A/c Line Item Display

Hi Guru,
In Assignment No column, GL A/c line item display ( FBL3N ) it is showing the Billing Document No same as in Referance No Columnbut not the assignment no,
but should actually show the Assignment No as per the Billing Document Display VF03, where it is showing correctly.
Can you please help.
Thanks
Mukh

are you saying the assignment field for the customer entry is correct but for the GL account it is not?
If that is the case you could either do a mass update of the assignment field from the customer entry to the GL account entry.
However to correct this at source you need a substution that looks at the customer assignment value and copies it into the GL account entry.

Offsetting Account in line item display - FBL1N or FBL3N

How can I bring in the offsetting account name into the line item reports FBL1N or FBL3N?
I have applied OSS note 112312 using the SAP function LINE_ITEMS_GET_GKONT but this only brings in the account # and account type. I would also like the account name. I'm assuming I need to somehow change structure RFPOSXEXT but don't know where to get the name field (I think it's GKONT_KTXT but not sure).
I appreciate any suggestions you might have.
Thanks
Twila

Hi
A Document is a proof of a business transaction.
A document contains Header and Line Items.
There will be minimum 2 line items and a maximum of upto 999.
Line Items display which account is debited and from which account it is credited.
while creating a G/L account , in the control data tab , there will be line item display check box. if you dont select the check box , you will not be able to see the line items ie you will not see which are debited and which are credited. you will see only the balance available in the accounts ie account balance.
you must select the line item display check box to display the line items.
selling items (materials) from sales and those line items will be displayed in G/L account or some thing else -? This is posting documents via Accounting Interface(from SD) , this results in Line Items in FI Document.
If you want to summarize FI Documents, read not 36353 and note the links to related notes.
Regards
Venkat
Edited by: Venkat Dara on Dec 17, 2008 8:01 PM

No line item display in FAGLL03 & FBL3N GL line Item reports

Dear All,
I have parked the customer invoices with normal customer recon account and with special GL indicators. The system do not display parked lines for Special GL indicators. How can i display the line item display information in FAGLL03 and in FBL3n report.
Following settings have already been made are;
1. Fs00 = line item display check is on.
2. In initial screen for FAGLL03 & FBL3N Selection: Parked Items Parked items are displayed and checked.
The only information for parked special gl line items is get through FBL5N report only.
Kindly suggest in there any way that we can get report from GL line Item reports???
Regards

Some how client do not want the functionality

GL display for inventory account which are not defined as line item display

Hi All,
We have inventory gl accounts which are auto post accounts , these accounts get posted when grn is done. these accounts are not defined as line item display accounts, but if we execute the T code: FS10 we get the gl balance display and not line item display.
Our requirement is that we should be able to view the line item display matching the GL account balance in that GL account.
Can we get the report in MM module line items wise display.
Regards
Prashant P. Zinge

Hello,
You should use RFSEPA01 program via execute SE38 transaction.
This program activate line item for each account. Activation means, this program generate line items to BSIS table. So that after this program running, you can see line items in FBL3N.
Regards,
Burak

Populate Assignment Field in G/L line item display (FS10N/FBL3N)

Hi All,
I am using FS10N to see G/L Account Line Item Display.
I am seeing the Report Display with Coloumns like Doc.No., Type,Doc.Date,Amount in Local Currency etc etc
There is coloumn showing Assignment.The entries are not getting populated/displayed under the same coloumn of Assignment
When I go to Change Layout I see th Assignment field but the nothing is getting dislayed under the Assignment coloumn when I run FS10N/FBL3N.
How do I solve the above problem?
Thanks
Vivek
Edited by: VIVEK KAPOOR on Dec 11, 2009 4:11 PM

Hi ,
Actually when i do FS10N or FBL3N to see G/L Account Line Item Display i am able to see the display of the G/L Account but there is a coloumn under Assignment and it shows no entries i.e. Assignment coloumn is blank.What should i do so that i get entries for assignment field because there are entries made in Assignment field.Table is BSEG and the field is ZUONR.How do i get these entries in the G/L Account Line item display for G/L Account using FS10N ?
Thanks
Vivek

Additional Field(customized) in G/L acct bal line item display FS10N-FBL3N

Steps done:
1st: I appended an extra field(customized) to RFPOS and RFPOSX structures.
2nd: Went to FIBF and looked for BTE applicable and found sample_interface_00001650. (Line item display: Add data per line)
3rd. I copied sample_interface_00001650 with a name of zsample_interface_00001650 and added line of codes for selection to fill the extra field I added.
4th. I assigned the event found in FIBF=>Environment=>P/S Modules=>of a SAP application.
5th. I executed RFPOSXEXTEND program in SE38. After running, RFPOSXEXT was updated but not RFPOSEXT.
I run FS10N and check for the field I added if existing. The extra field is existing however when I tried to move the field to the columns to be displayed in ALV, I got an error saying that there are inconsistencies in table T021S and RFPOSEXT.
Please help. Thanks.
Is there a certain program needed to update RFPOSEXT just like RFPOSXEXTEND for RFPOSXEXT?

Hi ,
Actually when i do FS10N or FBL3N to see G/L Account Line Item Display i am able to see the display of the G/L Account but there is a coloumn under Assignment and it shows no entries i.e. Assignment coloumn is blank.What should i do so that i get entries for assignment field because there are entries made in Assignment field.Table is BSEG and the field is ZUONR.How do i get these entries in the G/L Account Line item display for G/L Account using FS10N ?
Thanks
Vivek

You are not authorized to call up line item display (FB03)

Hi,
actually; I am facing a problem; one user is getting error message "You are not authorized to call up line item display" when he is trying to view the payment usage of document no in FB03 transaction code.
I have checked and found that user is already having display access for the company code which he is putting under company code field.
Also as per the SU53 screen shot; it is showing
Authorization check failed for S_CTS_ADMI
Field - CTS_ADMFCT
for - TABL
I have not run the trace yet..
Kindly advice on what could be the problem and solution for that...
Many thanks in advance for your help.
Regards,
Anuj

> Also as per the SU53 screen shot; it is showing
>
> Authorization check failed for S_CTS_ADMI
> Field - CTS_ADMFCT
> for - TABL
Total Questions: 8 (6 unresolved)
Good match!

FBL3N and FBL1N line item display

Hi Friends,
- In TC: FBL3N, GL A/c line item display to be able to pull out data and display - vendor code, vendor name, PO No., text from PO (or MIRO header text)....How i can achieve this?
- in TC: FBL1N, vendor GL to be able to pull Cheque No. reference in report...How i can achieve this?
Thanks
Para

No.
I think this requirement can not be met with the report painter as it would fetch data from multiple tables.Secondly thease transaction codes itself created through ABAP.
Specification you have to provide to your ABAPER like table names & field names
Regards,
Abhijit

No line item display possible for account -fbl3n

Hi,
No line item display possible for account ,
i'm getting the abv error when run fbl3n .. pls tell , how to resolve it..

Dear,
It means no data found for your requirement.
If you want to find out the list on base of G/L please enter G/L and click on all item.
Other wise if you want to see only open item then click on open item and remove date from field of open item date.
Also click on noted item and click on execute button
Regards,
Mahesh Wagh

GL Line Item Display vs. Vendor Line Item Display

Hi Gurus,
I have parked a document with a vendor line item. When generating
standrd GL line item reports (FBL3N or S_ALR_87012282), the line items
for my parked document are not displayed. But if I generate the vendor
line item report (FBL1N), this parked document is displayed.
Please confirm if this is a standard behaviour and why.
Thanks and best regards

HI
I knew that, a complete FI document wont give such error thats why i asked for Document type ,You please note each document type has its own characteristic.
Hope your query closed
Thanks

Customer number needed in "GL a/c line item display" for customer gl?

Hi SAP Experts,
while running GL account line item display in FBL3N,customer number is not displaying against the gl accounts relating to customer reconcilation account or the gls relating to the customer line item entry.my clients need that in either ASSIGNMENT field(where presently showing the document entry date as defult) or in a different column.for that he even does not want to write any report.
How can i solve this problem?
Plz guide me.
I need a quick response.
Regards,
Biswa

Hi,
Check If you are using the G/L account which is the reconciliation account for your customer, then it is possible to display the special field1-U_KUNNR and it is ALSO possible to add Sort Key 031 into the Assignment field of that account in FS00 tab Control Data and therefore to display your 'Customer no.' in the Assigment field in FBL3N.
If you are using the G/L account which is the offsetting entry or the other side of the posting, then it is NOT possible to display your 'Customer no.' neither in the Assignment field, nor adding the
special field 1-U_KUNNR to the display. At this stage, notes 112312 and 217189 may be of use, which enable you to use a Business Transaction Event to populate offsetting account information.
I hope these helps.
Regards
Ravinagh Boni

T code for vendor,customer line item display

we are using ecc 6.
I would like to know the wheter any tcode is available in ECC6 for cust and vendor line item display.
NEW TCODE for FBL3N is FAGLL03. Like that any new new tcode is availbale for FBL1N & FBL5N?
Please clarify.
Thanks
Rajesh

Dear Rajesh,
There are not direct 'replacement' as the FAGLL03->FBL3N for FBL1N and FBL5N.
So the FBL1N and FBL5N can be used further without any problem.
As stated before, only the G/L are has directly changed.
But in the relation to the New G/L, there are two new 'Recherche' tools for the vendor and customer area in relation to the 'Segment' and 'Profit Center'.
You can find them in the FGI0 transaction.
They are called:
0SAPRECIEV01
0SAPRECIEV02
0SAPPAYABL01
0SAPPAYABL02
Maybe they can also help you further.
Best regards,
Christoph

Difference in GL Balance display and GL line item display

Dear All,
Can any one help me why the difference between GL display and GL line items display?
Thanks in advance
regards
Elan

Hi,
You can do the following:
1. carryout gl balance carryforward from previous to current year : Use t.code:F.16
You can cross check the fs10n balance with FBL3N balance from previous years. Assume these balance are matching for previous year 2007 and 2008, you have this problem only in 2009, then you can carryforward this balance from 2008 to 2009 once again. Some times users may post some adjustment entries as per the auditors recommendations. If this balance is not matching from 2007 itself, then first carryforward the balances to 2008 then 2009. You can run this transaction no of times.
2. check the master data of gl account through t.code:FS04, whether any changes has been done to line item display field?
If you find any changes to line item display field then run the program "RFSEPA01" to get all the line items.
3.If your issue was not resolved even after the above two activities, then let me know the sap version you r working.
all the best
Prasad

Functional Area in Line Item Display FBL3N

Similar Messages

Maybe you are looking for