Functionality of import,export in user Admin

Hi,
Wat is the functionality of Export and import in User Admin ?
Thankyou.

Hello Ramganesan,
It allows you to export and import groups from one portal to another.
See:
Re: How to export a group from one portal to another?
Hope that helps,
Yoav.

Similar Messages

  • Problem with using the import tool under User Admin role

    Hello,
    I have created a role through the import facility under the User Admin role:
    [role]
    ridpcd:portal_content/content....
    rdesc=my role
    Although I have recieved a successful message I couldn't locate this role, not when I was searching it in User Admin or under the pcd location where I asked to create it.
    I then imported a transport package from another portal that contains a role in the exact same pcd location, this time an actual role has been created.
    The problem is that when I try to use the import facility again to assign a group to this role I get: Error: Role found, but unique name "pcd:portal_content/..."  is not unique!
    When I search User admin for this role I get only one and when I go to this pcd location I only see one role so I don't understand this message  and how can a unique pcd location cannot be not unique.
    Any ideas...?

    Try performing the import again, but this time do not use the fully qualified pcd path. Just specify the rid without the pcd definition. In otherword if you did a search in the user admin for the role ID you would not use the full pcd:rid just the rid value.
    The alternative is to first delete the role and then import again. The reason you are gettign the problem is that the pcd generates a unique sid entry for the role and thus the manner in which you are performing the update using the full pcd path is not allowed. For this reason drop the fully qualified pcd path.

  • Import export utility user not found

    I'm getting the following error when running the 9.3.1 ImportExportUtility on a 9.2.0.2 version of Shared Services. NTLM is used as the authentication provider.
    2009-06-19 08:49:30,642 Export : Exception encountered while retrieving user ntlm://SID=S-1-5-21-2134593322-327503246-231145771-21130?USER
    2009-06-19 08:49:30,642 Export : Root cause : User not found with identity = ntlm://SID=S-1-5-21-2134593322-327503246-231145771-21130?USER
    2009-06-19 08:49:30,658 Export : Silently ignoring the last error
    There were 99 users extracted and this message appeared for 36 of the 99. Could someone tell me where the users are not in sync. Is it between Open Ldap and NTLM, Open Ldap and the application repository, etc. Also, is there a way of identifying the user Id. from the message.
    Thanks,
    Tom

    I finally found a real solution to this problem and I wish I had found it sooner.......
    Starting sometime around 9.2, Oracle started including a tool called : UpdateNativeDir
    The primary purpose of the tool (as I understand it) is to allow you to do a refresh between your external provider (i.e. Active Directory) and the native (OpenLDAP) directory in the event you moved directories around. This tool will also purge any invalid entries that are in the local (LDAP) directory that are not in the external provider.
    The tool is pretty straight forward and the readme file explains the details of how to use it.
    I've tested this tool in our dev and production environments now and it does exactly what I need. The additional benefit is that I can schedule this to run periodically to ensure the directories are sync'd.
    The tool is going to be on your Shared Services machine and comes zipped in a file called UpdateNativeDir.zip
    According to the documention (9.2.0.3) it is located at :
    <Hyperion_Home>/common/utilities/nativedirectoryupdateutility
    On our 9.3.1 Shared Services box, I located it at :
    <Hyperion_Home>/common/utilities/SyncOpenLdapUtility

  • Import/export to memory and global variables

    Hi,
    Im working on some functionality using import/export to memory. One of the statements is:
    import gf_memid_exit = g_exit_flag gf_memid_result = t352r from memory id 'ZREV_EXT'.
    Im using global variables to contain the cluster names. But this is not working. When I change the global variables into local variables, it works. It this normal? Because I would like to have global variables (even better I would like to have global constants) to declare in order to use them within the program.
    Any ideas?
    With regards,
    Mike

    Hi Mike...
    I think with import u can use global or local variables..in debug mode pl. check when u r using global variables..whether it is getting cleared or overwritten by some other values or not. Or try with global constants..it should work...
    Regards,
    Joy.

  • Questions on Import/Export Personalizations

    Hi,
    We are on 11.5.10 CU3. We have dozens of personalizations in Dev. I understand that Functional Administrator Import/Export tool can be used to transfer them from Dev to production. I am facing some issues when I try that.
    1. I exported a personalization in Dev to the same instance java/custom. It created the directory structure java/custom..../site/0/ReqSummaryPG.
    2. I imported it back. This was successful.
    3. I re-imported it. It failed without an explanation for the failure. What could be the reason? Doesn't it just overrite the previous import - like when importing substituions?
    4. I copied the custom/..../site/0 to another instance and imported it there. It was successful. However I could not see the personalizations.
    5. So I checked. I realized that the directory structure was wrong. It was java/custom/apps/..../site/0
    instead of java/custom/oracle/apps/..../site/0.
    6. So I corrected the directories and re-imported. Failure like 3 above. I thought it was because of duplicate records. So i did the query select * from jdr_paths where PATH_NAME like '%ReqSummaryPG%'. I got only one record which was the seeded record. So eventhough 4 was successful there is only one record. Why?
    Do I have to bounce Apache for each separate import of the same document?
    Is there documentation on this utility with best practices? I see in the forum that no-one could successfully make this utility work.
    Any help would be appreciated. I thought this was a simple utility ...
    Thanks
    Sandeep

    Well this worked the next day! I reimported ReqSummaryPG again and it worked. I believe a few Apache bounces took place inbetween.
    We were able to export/import quite a few personalizations. However, we got it right the first time this time around
    I am still interested in knowing why a second consecutive import of the same doc doesn't work? And how to make it work? This would help in resolving issues in case of mishaps. Appreciate it if someone can provide an explanation.
    Thanks
    Sandeep

  • User Admin Import/Export

    I'm trying to get a report of all IDs in our portal & the roles assigned to them.  When I run User Administration -> Import/Export -> User Data Export & I select <ALL USERS> the results are often missing data.  Sometimes I don't get all records; more frequently I get all records (all IDs) but not all roles are included.  e.g. I've just tried it again & have found some IDs which have no data against the role= field (but when I look at the ID I can see that they do have a role).   Other IDs are reported with (say) 2 roles, but I know they have 3 or 4. 
    Has anyone seen this?  Does anyone know how to fix it?
    Thanks, Chris

    Users
    http://help.sap.com/saphelp_nw04/helpdata/en/7d/49ae0771924cf4a1fc7e2af7b2e18c/content.htm
    Groups
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/cde2fb82644d98bfb6d558440d6806/content.htm
    Roles
    http://help.sap.com/saphelp_nw04/helpdata/en/d1/a73184c45e4e119e63d1b8108f1ab0/content.htm
    Search on help.sap.com for User Import UME

  • Export and Import of Portal Users (UME database only)

    Hi
    What is the most efficient way to export all Portal user that are stored in Portal UME database so that it can be imported to another Portal installation and be used..
    Thanks in Advance
    Ananda

    Hi,
    SAP User Administration is the standard way to export and import users in the portal. Using the export functionality, all the user information will get exported, including the roles and groups assigned:
    [User]
    uid=userid
    last_name=Lastname
    first_name=Tobias
    language=en
    accessibility=0
    role=pcd:portal_content/com.sap.portal.xxx;
    group=Administrators;
    If you only want to export the user data without the roles and groups, you'll have to delete these lines.
    SAP Help: http://help.sap.com/saphelp_nw04/helpdata/en/70/9be23d44d48e5be10000000a114084/frameset.htm
    Export Format: http://help.sap.com/saphelp_nw04/helpdata/en/ae/7cdf3dffadd95ee10000000a114084/frameset.htm
    SDN Article: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f02e3e37-5ee3-2910-129d-967aef3fa386
    br,
    Tobias

  • Export & import weblogic 7 users

    Hey,
    I'm currently migrating a Weblogic 7.0.1 installation from
    a Windows 2000-system to a RedHat-Linux 7.3-system.
    I've been successfull at doing the installation on Linux and
    installing all the applications.
    Now 1 small problem still remains. On my current Weblogic installation (W2K) I've
    got currently about 80 users created and a couple of roles. Now I have to create
    all those users again on the Linux-installation.
    Instead of recreating every user again, I was hoping there was a way to export
    the users to a file and import them on the linux-installation.
    Can anybody help me find a way to tackle this small issue ???
    Thanks in advance.
    Bart Laeremans

    Hi Martin
    Here's another possible approach (I haven't tested it though)
    1. Export the DEV workspace(s) before the clone
    2. Comment out the wwv_flow_fnd_user_api.create_company statement and any groups/users that already exist in prod e.g. ADMIN
    3. After the clone Run the export.sql files from the SQL*PLUS command line, which hopefully will just create your users
    There's a few manual steps modifying the files, and it's probably not supported but it might be the simplest/quickest way (if it works)
    Cheers
    Matt

  • User Form Settings Import/Export ?

    Hello Fellow SAP members,
    I am currently creating new user accounts for my company and I have 100++ users to set settings for...the columns they can see...the authorizations they are given etc etc.
    Its an extremely tedious task to do which will take me days to complete and i was wondering is there a import/export function where i can copy and paste the settings for a new user instead of having to go through each and everyone's accounts just to set it?
    Any help or suggestions would be MUCH appreciated!

    Check this link
    [http://www.sbonotes.com/2008/03/how-to-copy-one-screen-layout-to.html]

  • Error in import/export of functions - for the apex team

    After exporting functions, the import gives an error.
    Reason :
    the export generates a script with
    function \
    function
    importing this script gives an error because only the first function is imported. or the functions seems to be togheter one function
    the export should generate
    function
    function
    Leo

    Leo - I logged into your workspace and exported the functions. The generated script looks perfectly good. I then uploaded that file into my own workspace and ran the script. The functions were all created as separate functions.
    There must be something happening at your end causing newline characters in the file to be lost or something. Or maybe I didn't follow exactly the steps you did.
    BTW, when you mentioned the "\" character in your original post, I assumed you meant the "/" character.
    Scott

  • SQL Developer 3.1 EA3 unable to import / export user defined reports

    Hi gentlemen,
    Name says it all. Import / Export do not appear anymore neither in dropdown menu for User Defined Reports, nor export for other reports (DD reports or shared reports).
    Best Regards,
    Olivier.

    Those are now Save As / Open...
    Hope that helps,
    K.

  • Can we lock down user admin functionality to allow password changes only?

    Hi,
    Is it possible to lock down the user admin functionality so a specific role can only change passwords?
    We have a large user base of >10K infrequent users that are forced to change their passwords every 30 days. We suspect a lot will require password changes and we are keen to not have the tech team spending most of their time dealing with such requests. We would like to pass this task onto data management but not allow them the system administrator functionality.
    We know we can create a responsibility with a limited menu available so the operator can see only the security/user/define menu. But this will still allow the person to add responsibilities to existing user accounts and create new user accounts, both of which are deemed unacceptable security risks. Is it possible to lock down the form as well as the menu? Allowing operators to only change the password of existing users? Or can we use the custom.pll to error when a user tries to do anything except edit the password field when in this role?
    Thanks
    Matt

    You should be able to do that. You would create a new privilege level (ie 7), assign all commands to that level except (this is my guess) the command vpn-sessiondb, you would put that at a lower privilege level (ie 6). Here's a write-up that may help getting you in the right direction.
    http://www.packetpros.com/2012/08/read-only-asdm.html

  • Delegated user admin and export Roles&Groups ?

    Hi experts,
    I'am searching some tips in order to allow my users's delegated user admin group to export UME Roles and Group. however, my users met no problem to assign their roles to themselves
    I'am working on EP 7.0 sp14 and my UME is an abap system
    Can you give me some advice to go out from this issue ?
    Best regards,

    Hi experts,
    I'll try to complete my question:
    I've added Batch action to my delegated user role, but it's not enough to perform export operation.
    I hope if i can find a combination of actions without "Manage ALL" that i can assign to my delegated user role.
    Best regards,

  • Import Export Functionality on OIA

    I have created some SOD rules and Policies on the OIA via Identity Audit >> Rules and Identity Audit >> Policies. I couldnt find much about the Import/Export functionality on the same. Was going through the scheduling-context.xml and came across :
    *<ref bean="rmeRuleMigrationJobTrigger"/>*
    *<ref bean="identityAuditDataMigrationTrigger"/>*
    Not much has been said about it in the document or discussed in the forum. If someone has some knowledge on it, could you please share ?
    Regards,

    --In Scheduling-context.xml, alter the following line
    Mulitple jobs can be added,
    1. Define a job in jobs.xml
    2. Add a reference to job below -->
    <!--ref bean="usersImportJob"/-->
    <!--ref bean="accountsImportJob"/-->
    <!--ref bean="rolesImportJob"/-->
    <!--ref bean="glossaryImportJob"/-->
    <!--ref bean="policiesImportJob"/-->
    <!--ref bean="businessStructureImportJob"/-->
    <!--ref bean="identityAuditContinuousViolationScanJob"/-->
    <ref bean="identityAuditViolationReminderJob"/>
    <ref bean="certificationReminderJob"/>
    <!--ref bean="reportReminderJob"/-->
    <!--ref bean="stableFolderCleanUpJob"/-->
    <!--ref bean="accountsMaintenanceJob"/-->
    <!--ref bean="roleMembershipRuleJob"/-->
    <ref bean="fullTextIndexMaintenancedJob"/>
    <ref bean="workflowStepSLAJob"/>
    <ref bean="roleStatusAndMembershipMaintenanceJob"/>
    <ref bean="rmPreviewCleanUpJob"/>
    <ref bean="userApplicationMaintenanceJob"/>
    <ref bean="postImportJobsLauncherJob"/>
    <ref bean="certificationRemediationJob"/>
    <ref bean="rmScanArchivalJob"/>
    <ref bean="eventPublishingJob"/>
    *<ref bean="rmeRuleMigrationJob"/>*
    *<ref bean="identityAuditDataMigrationJob">*
    </list>
    </property>
    In the jobs.xml
    the bean, by default, is already altered so you won't need to change anything there
    <bean id="rmeRuleMigrationJobTrigger" class="org.springframework.scheduling.quartz.CronTriggerBean">
    <property name="jobDetail" ref="rmeRuleMigrationJob"/>
    <property name="cronExpression" value="0 0/5 * * * ?"/>
    </bean>
    <bean id="rmeRuleMigrationJob" class="org.springframework.scheduling.quartz.JobDetailBean">
    <property name="name" value="rme rule migration job"/>
    <property name="description" value="old rme rule migration job"/>
    <property name="jobClass" value="com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.RMERuleMigrationJob"/>
    <property name="group" value="SYSTEM"/>
    <property name="durability" value="true"/>
    <property name="jobDataAsMap">
    <map>
    <entry key="jobOwnerName" value="REPLACE_ME"/>
    </map>
    </property>
    </bean>
    If you see the cron expression in the jobs.xml, an expression to create a trigger that simply fires every 5 minutes ("0 0/5 * * * ?") leave it at it is. Expression examples are at the bottom of the jobs.xml if you want more expressions. When you do the changes to the scheduling-context.xml, make sure you bounce the web server.
    Regards,
    Daniel

  • Can a user Import/Export Email from IMS?

    VER: IMS 5.2
    OS: NT4
    Q: Is there any way to import/export email from a user's account?

    What do you want to import/export from?
    I think you can do a dump of someone's mailbox using the imsbackup utility, but am not sure what format this gives you. Probably you can only import this into another iMS server.
    Apart from that, you could look at what tools your mail clients have for saving and importing messages. I think Outlook express has an archive utility that you could use. To import from Outlook to the server, you could use the iPlanet sync tool. This will synchronise in both directions between the iMS mail server and various clients. These include Outlook, Windows CE handhelds, palms, etc. Basically, if you set this up to synchronise with Outlook, then you can import/export using anything that will interface with Outlook.
    Of course you don't have to use Microshaft products. You could use any mail client to do this. Not sure about synching with other clients cos we've not done it.
    I'm not sure how you can get hold of this synching tool. There were various beta versions floating around about a year or so ago and I would have expected that they would have released a supported version by now. Then again.....

Maybe you are looking for

  • How can I create a new mail custom form shortcut ?

    Hello everyone ! It's been three hard day of searching for such a simple question: How can I add a button to Outlook's ribbon that select a new pre-define form to send ? I already have the button but I miss an instruction like that: Create new mail w

  • Default background color issue

    Hi, I am trying to change themes at run-time using StyleManager.loadStyleDeclarations(). Whenever I switch to a theme, the default theme's background color shows up for a fraction of a second. I tried using the "StyleEvent.COMPLETE" event handler but

  • FB60 Tax Issues

    Hi- I am having an issue with FB60 when I have multiple taxable lines and the correct tax amount is outside of the tolerance.  It will only assess the first line of the invoice and when you try to correct it the amount entered is allocated across all

  • Oracle DB Table DISCONNECTEDCAUSE Inquiry

    There is a field in the billing table called DISCONNECTEDCAUSE. The Type is String (256) and the domain is ASCII. I cannot find a description for it in any of my documentation. It tends to have only a few different numbers: -1 0 11 12 16 23 Anyone kn

  • I have bought and downloaded the new iphoto but it is not installing. I have restarted my computer and the problem continues. Help!

    I have bought and downloaded the new iphoto but it is not installing. I have restarted my computer and the problem continues. Help!