Functions and Permission in GRC AC10.0

Hi All,
We are creating the custom functions as a part of custom rule set creation in GRC AC10.0. We have defined the custom function as shown in the below example table(first table) . We uploaded the custome rule set with mass upload transaction and generated it. We noticed that the system is interpreting the values in the condition column differently than we mentioned in the upload files.
Does any one has idea on this? How the system evaluates the condition column?
Below is the one example and we have number of cases like this.
Uploaded with values
Fun ction
Transaction
Auth object
Field
value From
Value To
Condition
ZXXXX
SU10
S_USER_GRP
ACTVT
1
2
OR
ZXXXX
SU10
S_USER_GRP
ACTVT
5
6
OR
ZXXXX
SU10
S_USER_GRP
ACTVT
22
OR
ZXXXX
SU10
S_USER_GRP
ACTVT
50
OR
ZXXXX
SU10
S_USER_GRP
ACTVT
78
OR
ZXXXX
SU10
S_USER_GRP
ACTVT
PP
AND
Values in the system after upload
Fun ction
Transaction
Auth object
Field
value From
Value To
Condition
ZXXXX
SU10
S_USER_GRP
ACTVT
1
2
OR
ZXXXX
SU10
S_USER_GRP
ACTVT
5
6
OR
ZXXXX
SU10
S_USER_GRP
ACTVT
22
OR
ZXXXX
SU10
S_USER_GRP
ACTVT
50
OR
ZXXXX
SU10
S_USER_GRP
ACTVT
78
OR
ZXXXX
SU10
S_USER_GRP
ACTVT
PP
OR
Thanks in advance for your help
Hari

Hi Colleen,
Thanks for the reply.
my doubts got clarified after referring the below notes, but they are related GRC 5.3.
I hope the same logic will apply to GRC 10.0 also. Please let me know if you have any additional information.
1330165 - Instructions on how to use Operators AND OR NOT
1358952 - Rule Architect - logic of the NOT operator
Cheers
Hari

Similar Messages

GRC AC10 sync job error

Hi Experts,
I am getting error while running sync job. I searched but couldn't find a solution.
We have two GRC AC10 clients setup, one is for fresh AC10 installation testing and another is for migration testing.
Both clients talk to two different ECC clients. Issue is that we have setup all SPRO configurations, plug-in settings and stuff which is described in AC10 post -installation and migration documents,
Sync job for one client is successful, but sync job for another client is giving error -
Error message -
Starting authorization sync for connector IE9_600 and language EN
Error in IE9_600; Reason Error in RFC; 'Function module "/GRCPI/GRIA_AUTH_G
PFCG authorization sync failed with errors
I have checked plugin settings, RFC and other settings, it seems ok as it is in another client.
What could be the cause and solution? Any suggestions are highly appreciated.
Thanks in advance,
Regards,
Sabita

The issue resolved, RFC was incorrectly pointed to wrong client.
Regards,
Sabita

Error While uploading the Function and Function_BP

Hello,
I am getting the following error while uploading the Functions and Funtions_BP using the Rule Upload functions.
com.virsa.cc.comp.Function_upload.onActionUploadFunc(Function_upload.java:302) com.virsa.cc.comp.wdp.InternalFunction_upload.wdInvokeEventHandler(InternalFunction_upload.java:150) com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) javax.servlet.http.HttpServlet.service(HttpServlet.java:760) javax.servlet.http.HttpServlet.service(HttpServlet.java:853) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) java.security.AccessController.doPrivileged(Native Method) com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
The files which i am uploading the file from the Best practises only.
What is the reason for this error?
Did any one get this error?
Regards,
Kumar Rayudu
Edited by: Kumar Rayudu on Aug 4, 2009 12:32 PM

Hello Kumar,
Have you uploaded the SAP text and object files? Upload them first and then try to upload functions.
Harleen
SAP GRC RIG

Solution Manager and a SAP GRC AC 5.3

Hello,
We have a Solution Manager and a SAP GRC AC 5.3
We ant to know if somebody knows how to connect or the architecture os infrastructure to connect the Solution MAnager with the GRC.
What we have to do is... If someone in the Solman does a user or role request, the SAP GRC gets this request and begins the necesary workflows.
I need help
Best regards.
Pablo Mortera.

Hi,
As per your requirement, you want that the request should be automatically trigerred from Solman to GRC.
In GRC, CUP is used to provision the user and roles. The request can directly be created in CUP by a functionality known as HR triggers however this requires SAP_HR module which is not present in Solman.
So it is not possible to create request directly from solman. User can login to CUP and then can create the request for his login.
Regards,
Shweta

GRC AC10 EUP Repeated Descriptions

Hello,
I have an EUP ID we created (100). We want to change the fields but when we make an entry the description gets repeated with a different setting. In other words, when we select the entry to change it, it doesn't just change, it creates an additional line with the desired entry. Any thoughts? Please help. Im on SP14 GRC AC10. I have attached the screenshot.

Gustavo,
Very strange And surprised to see this kind of behaviour!
Just to check, what happens if you try to configure your settings for both of the entries? Does it accept and works as expected?
At least we can play with this work around.
Regards,
Faisal

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

In the latest verision of ITunes (downloaded yesterday) I can no longer see how large (in GB's) my music library or playlists are. This is a very valuable function and it seems to have disappeared. Anyone know where it is?

In the latest verision of ITunes (downloaded yesterday) I can no longer see how large (in GB's) my music library or playlists are. This is a very valuable function and it seems to have disappeared. Anyone know where it is?

Go to the View menu and turn on the Status Bar. If you don't see the menus, go to the small icon with the arrow at the extreme upper left and select "Show Menu Bar":
Regards.

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

Hi there
I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these. Instead it just took me to the
adobe page with nowhere visible to update. I then sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
functionality It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe.
I have since remedied the problem as my original lightroom 5.7 icon is still available on the desktop and have gone back to that. I do feel that this is a bit
of a rip off and an unnecessary waste of my time though.
Thank you for your prompt reply by the way.
Carlo
Message Received: May 04 2015, 04:52 PM
From: "dj_paige" <[email protected]>
To: "Carlo Bragagnolo" <[email protected]>
Cc:
Subject: I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have
reduced functionality what it this about and how do I get my product back
dj_paige created the discussion
"I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
this about and how do I get my product back"
To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
>

BI Publisher - SuperUser not able to acces Roles and Permission Page

I have set up the BI Publisher as said in http://gerardnico.com/wiki/dat/bip/configuration_bip.
But
1. SuperUser is not able to access Roles and Permission.
2. I'm not able to access the BI Answers Catalog.
I also have a doubt about the BI Server Admin. Is it the RPD Admin?
Kindly Help

I have set up the BI Publisher as said in http://gerardnico.com/wiki/dat/bip/configuration_bip.
But
1. SuperUser is not able to access Roles and Permission.
2. I'm not able to access the BI Answers Catalog.
I also have a doubt about the BI Server Admin. Is it the RPD Admin?
Kindly Help

HT4913 i am trying to get my computer and my wifes computer on my itunes match. i did the add a computer function and it says that this computer is already associated with an apple id...if you use itunes match with your apple id etc for 90 days...please

i did the add a computer function and it says that this computer is already associated with an apple id...if you use itunes match with your apple id etc for 90 days...please explain. is this going to screw my wifes account up?

If you both have seperate iTunes Store accounts then basically, yes, it is going "screw up" your wife's account.
iTunes Match is designed as a single-user service which is associated with one and only one iTunes Store account ID. If you have subscribed on your account and want to activate the service on another computer that is already signed in with an account the present account must be signed out and then iTunes signed into your account. This means the other computer will have complete access to your account and will only be able to make purchases on your account. iTM is not designed to be signed in and out at will. If she has apps purchased with her iTunes Store account they will not be able to be updated.

I would like to put Dreamweaver 8 on a new computer. There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this?

There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this? How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer? Is it even worth doing or do I need to get a new version. What are the killer features I'm missing?

If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
Adobe - Dreamweaver Support Center : Updaters
Nancy O.

How to use, Case function and Filter in Column Formula?

Hello All,
I am using case function and also would like to filter value to populate.
Below is showing error :
case
when '@{Time}' = 'Year' then "Time"."Fiscal Year"
when '@{Time}' = 'Quarter' then "Time"."Fiscal Quarter"
when '@{Time}' = 'Month' then FILTER ("Time"."Fiscal Period" USING "Time"."Fiscal Period" NOT LIKE 'A%')
else ifnull('@{Time}','Selection Failed') end
Thanks, AK

when '@{Time}' = 'Month' then FILTER ("Time"."Fiscal Period" USING "Time"."Fiscal Period" NOT LIKE 'A%')I dont think Filter this works here or any other data types except number.
Try to use option Column's->Filter->Advanced->Convert this filter to SQL
If helps mark

HT1218 After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

Thanks for the reply. I appreciate the response. I tried that approach this evening and it didn't work for me. (Technically it worked for me, when I was hardwired into my base station, but would not work for me wirelessly, which is my main issue.)
Again, using the approach you recommended works only if I have my ethernet cable attached to the LAN port so my computer is communicating directly to the base station through the hard wire. I am able to scan for my base station and make setting adjustments normally this way too.
As soon as I disconnect from the LAN port and try to go wireless is where I run into problems. The Base Station's wireless network I created is available to choose in the top right corner of the monitor with all of the other available wireless devices/networks -- but the network I created does not have access to the internet. I am also unable to configure my Base Station wirelessly. When my Airport Utility tries to scan for the Base Station and Network, it cannot find any Apple Wireless Device. It's like the Wireless Network in my base station is not sending out a signal.
Is there a way to resolve this issue?

Windows says "device is not functioning" and "Windows does not recognize"

I lost my USB dock connector cable for my ipod. I just went out today and bought a brand new "Cygnett GrooveLink Strech Retractable USB Cable for iPod". I was pumped when I came home to finally be able to add music to my ipod again, but alas when I plug the iPod in, Windows pops up saying that the device is not functional and that Windows does not recognize it. I tried everything from rebooting the iPod to re-downloading iTunes and iPod updater. After searching this site for the past few hours, I figured I'd try and possibly find some real answers here. Please Help!!

Hey everyone,
I had the same problems all of you are having. I
just got a 5th generation video ipod. For a few
days, my computer a) wouldn't recognize it; b) froze
up when I connected it; c) mistook it for a mass
storage device ("drive E"). I bought a USB 2.0
notebook card which didn't work either and actually
seemed to make the problem worse because when I
connected the iPod to it my computer froze up.
I was very confused because my new iPod worked on my
brother's computer--which is much older than mine but
still recognized the iPod and connected to it.
Then I noticed that my brother's computer is running
an older version of the ipod software. I used his
disk to install "Ipod Updater 2005-06-26" rather than
the new version of the software on the Apple Web
site. Then I plugged my iPod into a USB 1.1 port.
To my surprise, my computer finally recognized the
iPod and is now loading music onto it. I cannot
believe this worked. I wonder if the latest version
of the software is faulty in some way.
Try it! I hope it will work for you too. You will
need an older version of the iPod updater software,
so borrow it from a friend with an older ipod.
I am having this problem also...It will work fine on the 1.1 but when i plug it into the 2.0 it has trouble recognizing it...

Few questions about sql2008 functions and commands

hello,
I am learning sql2008 implementation and maintenance,I am just 2 weeks bussy.there is some questions in my mind wich I can't answer it.
1-when I can use USE MASTER statement
2-can a database for example (test) have many and unlimmited file groups?
3-what is the diferrence between file and filegroup! is the term of file means tables in filegroup?
4-with boundary points does mean the data type when creating partition function!
5`what is diferrence between full text index and index,where you have to use the index and wher you have to use full text index?
6-each filegroup must have one partition or one partition can have many filegroups in partition scheme!
7-do you have to partition every scheme or not! where do you have to partition a scheme and where not?
8-can you give a little example with switch operator!
9-again do you have to partition every table and index in the real world or not!
thanks
johan
h.david

Hi,
Let me try to answer your questions:
You need to use USE MASTER whenever you need to do some work in the MASTER database and the database context is not that.
Yes, a database can have many filegroups. Please check this article:
http://msdn.microsoft.com/en-us/library/ms179316.aspx
Please check this article:
http://msdn.microsoft.com/en-us/library/ms179316.aspx
As per BOL:
boundary_value is a constant expression that can reference variables. This includes user-defined type variables, or functions and user-defined functions. It cannot reference Transact-SQL expressions.
boundary_value must either match or be implicitly convertible to the data type supplied in
input_parameter_type, and cannot be truncated during implicit conversion in a way that the size and scale of the value does not match that of its corresponding
input_parameter_type. For more details check
http://msdn.microsoft.com/en-us/library/ms187802.aspx
For simplicity: Full-Text index is used to search in a LOB/text data in a column, index is used to speed up your queries. Please check these articles:
http://msdn.microsoft.com/en-us/library/ms142571.aspx,
http://msdn.microsoft.com/en-us/library/ms189271.aspx
As per BOL: When you create a partition scheme, you define the filegroups where the table partitions are mapped, based on the parameters of the partition function. You must specify enough filegroups to hold the number of partitions. You can specify that
all partitions map to a different filegroup, that some partitions map to a single filegroup, or that all partitions map to a single filegroup. You can also specify additional, "unassigned" filegroups in the event you want to add more partitions later. For
more info, please check
http://msdn.microsoft.com/en-us/library/ms188730.aspx
8. Please read the concept of partitioning here:
http://msdn.microsoft.com/en-us/library/ms190199.aspx and for SWITCH operator, please check the sliding window example at here:
http://msdn.microsoft.com/en-us/library/aa964122(SQL.90).aspx
9. It depends :) but you always will have at least 1 partition!
I hope it helps.
J.
There are 10 type of people. Those who understand binary and those who do not.

Functions and Permission in GRC AC10.0

Similar Messages

Maybe you are looking for