Fusion Drive option for iMac 21.5" late 2013

Fusion Drive option for iMac 21.5" late 2013 will upgrade main SATA HDD to 7200rpm model? Or just add SSD to standart 5400 rpm HDD for 21.5"?
Thank you for your attention.

You can't add an internal drive, but you can add as much storage as you want via Thunderbolt.

Similar Messages

Is Disk Utility in OS X 10.8.2 the version of Disk utilit that controls the Fusion Drive on new Imacs?

is Disk Utility in OS X 10.8.2 the version of Disk utilit that controls the Fusion Drive on new Imacs?

No. Only those computers with a Fusion Drive installed will get the special version of Disk Utility. Do a Google search if you want to find out how to create a fusion drive with older systems, but I suggest it's a waste of time.

Will the 2013 update to the regular macbook pro include a fusion drive option?

What is the likelihood that the 2013 update to the regular macbook pro will include a fusion drive option?

Apple will only modify the hardware of your computer in case something is damaged. However, if you want, you can try to make your own Fusion Drive on the MacBook Pro, as Apple doesn't support it officially on that Mac > http://www.macworld.com/article/2014011/how-to-make-your-own-fusion-drive.html

How I Managed to Install Windows 8.1 Pro on an iMac 27-inch, Late 2013

As is typical with many of my Boot Camp installs, this one did *not* goes as smoothly as planned. This installation was particularly troublesome, so I thought I would share how I managed to set up Boot Camp on a brand new iMac (27-inch, Late 2013) using a Windows 8.1 Pro DVD and an external Apple SuperDrive. These are the steps I took:
Download Boot Camp Support Software 5.1.5640 (http://support.apple.com/kb/DL1721)
Copy Boot Camp Support Software to empty MS-DOS (FAT)-formatted USB key
Run Boot Camp Assistant and select third option only (Install Windows 7 or later version)
Computer would reboot after Boot Camp Assistant finished but would boot back into Mac environment and not continue Windows installation
Boot computer holding down option key and select Windows (with DVD icon) and go through initial setup process (could go as far as trying to format Boot Camp partition as NTFS and then got stuck)
Quit Windows installer and reboot computer holding down option key and select EFI Boot
Run Windows installer
These same steps worked for another iMac (same model) that I set up later the same day.

Note: These types of discs or activities are not supported by DVD or CD sharing:
DVD movies.
Audio CDs.
Copy protected discs such as game discs.
Install discs for an operating system such as Microsoft Windows (for use with Boot Camp), or Mac OS X.
Burn a CD or DVD

MST Support for MacBook Pro Retina Late 2013 - DisplayPort 1.2 - Will it ever happen? (with sources)

So back in October, I purchased a brand new Macbook Pro Retina (MBPr), fully loaded with top of the line specs. I was soooo excited to have Thunderbolt 2 tech which Intel AND Apple describes as having DisplayPort 1.2a compatibility - which up to this point is unfortunately NOT the case. The point of the information/questions and requests in this article is to engage a conversation about the issues of not having MST support after Apple falsely mislead their consumers to think otherwise - especially when it is clear the MBPr is capable. Please read on...
Apple advertises that the Thunderbolt 2 ports on BOTH the MBPr and the new Mac Pro (NMP) will have 4K Display support with the famed 20gb/sec Ports (DisplayPort 1.2 only requires a little above 17gb/sec). Now that the 10.9.1 update has been released, we have failed to see MST or Multi-Stream Transport enabled on the MBPr Late 2013. Now, as for the New Mac Pro- it DOES have MST enabled in 10.9.1 with the AMD GPUs. For all of you out there that's questioning what this means, short answer is basically the Mac Pro will be able to power a 4K Monitor at 60Hz through the Thunderbolt 2 Port but the New MBPr is stuck with only HDMI 1.4 support which tops out at 4K 30Hz. 30Hz is unacceptable for anything but movies or a photo slideshow. At 30Hz the cursor will jump across the screen, eliminating any of the benefits of 4K.
BUT it gets worse...
Apple can be seen advertising that the new MBPr 15" model can power a 4K monitor THROUGH the Thunderbolt 2 Port here: http://www.apple.com/thunderbolt - This article quotes the following:
"Now with Thunderbolt 2 built into the new Mac Pro and MacBook Pro with Retina display, you can connect the latest 4K desktop displays and get double the bandwidth for your peripherals. And the two generations of Thunderbolt technology are compatible with each other."
Does this not let the consumer assume that the newest MBPr will be able to drive a 4K display through the Thunderbolt 2 Port? I would say yes it does, but at the time I wrote this, the TB2 Ports can't power a 4K display because, as previously stated, MST is disabled in Mavericks for the 15" MBPr Late 2013.
NOW, later on Apple posted the following article on 4K support here: http://support.apple.com/kb/HT6008
4K support on the MacBook Pro (Retina, Late 2013)
MacBook Pro supports 4K displays and Ultra HD TVs at the following resolutions and refresh rates with the built-in HDMI port:
3840 x 2160 at 30 Hz refresh rate
4096 x 2160 at 24 Hz refresh rate (mirroring is not supported at this resolution)
In the article above the New Mac Pro is listed as having support for a 4K Display with the Thunderbolt 2 Port (or MST DisplayPort 1.2a Technology) at 60Hz with no problem. This leads myself and many others to believe that MST will NEVER be enabled on the newest MacBook Pro Retina with Nvidia GPUs. Yes, 4K IS supported but ONLY through the HDMI 1.4 port, which has the limitation of only 30hz. This two-faced advertising is extremely upsetting to a LOT of people, including myself.
Interestingly enough, THIS IS NOT a hardware issue. If one ventures into Windows 8.1 via Bootcamp and connects a 4K Display via the Thunderbolt 2 (or through DP1.2) Port, the Display registers at 60Hz, thus proving that the Thundberbolt 2 Hub Controller is completely capable of MST DisplayPort functionality. Clearly this a driver issue with Apple, Nvidia or Intel or any combination. What Apple has done here is forcing any professional that desires stable and clear 4K technology through their MacBook Pro Retina to do so only using Windows 8.1 on their own machines! Definitely an oxymoron if you ask me...
Later on when the Mac Pro was ready for ordering, Apple placed the Sharp PN-K321 as a compatible option for a 4K Display. On the Store page featuring the (over three thousand dollar) Sharp 4K display, located here http://store.apple.com/us/product/HD971LL/A/sharp-32-pn-k321-4k-ultra-hd-led-mon itor?fnode=53 Apple states the following:
"Note that 4K DisplayPort operation is only compatible with the new Mac Pro (Late 2013)."
All of that being said, and I'm terribly sorry for my wordy ranting...
This brings me to a final two requests to ANYONE reading this post:
a) Has anyone working with the new 10.9.2 Beta Update seen evidence that DisplayPort 1.2 capabilities will be enabled for the new MacBook Pro Retina (Nvidia 750M) with the promised "Graphics Driver Updates" within the next Mavericks update?
and
b) To others that purchased or were/are thinking of purchasing a new MacBook Pro Retina with TB2 Ports: If you are just as upset as me about this crushing blow to consumers that just purchased a $3,000 laptop that were promised something that wasn't delivered - I urge you please, write to Apple and let them know they are making a mistake. You can do this though the support page or through http://www.apple.com/feedback
Thank you for your precious time, and if anyone has anything to contribute to this issue, please jump in....

GOOD NEWS!
The Mavericks 10.9.3 update adds official support for Thunderbolt 2, 4K!
I'm not sure if you will be able to daisy chain anything to the 4K display. I've read that the design of Thunderbolt 2 includes support for DisplayPort 1.2 multi-stream (MST), which allows this type of daisy chaining with 4K, but we don't know if Apple has this supported on it's machines. Apparently it's been buggy in development because the graphics driver needs to work correctly with the Thunderbolt 2 host controller. I'm sure they will work it out if they haven't already.
The above is all via found information on this topic, but you can follow some more discussion here:
http://forums.macrumors.com/showthread.php?t=1713876
One more note on Thunderbolt worth sharing: always keep your fastest peripherals closer to the computer in the chain. If you have a TB1 device directly connected to the computer, anything further down the chain will be limited to TB1 speed/capability regardless of it's native speed. Always connect TB2 devices first, and save anything TB1 for the end of the chain.

Will a Samsung Electronics 840 EVO-Series 500GB 2.5-Inch SATA III Single Unit Version Internal Solid State Drive MZ-7TE500BW work in a late 2013 Mac Mini

Will a Samsung Electronics 840 EVO-Series 500GB 2.5-Inch SATA III Single Unit Version Internal Solid State Drive MZ-7TE500BW work in a late 2013 Mac Mini

Would you happen to know if it will work in a mid 2007 iMac running Mavericks with 4GB of RAM? I need this to last this year and next year I am buying my MacPro, anyway, I dont want to put all the work in to installing it if its not going to work, thanks for any help!

HT201364 why i don't install mac os x maverick for macbook pro retina later 2013?

why i don't install mac os x maverick for macbook pro retina later 2013?

Welcome to Apple Support Communities
The Late 2013 MacBook Pro already comes with OS X Mavericks. However, if you try to download OS X Mavericks from the Mac App Store, you will get a message telling you that your MacBook Pro is not compatible, when it is.
This is caused because the Late 2013 MacBook Pro is running a special OS X Mavericks version which is different than the version available in the Mac App Store. This makes that you get an error message when you try to download OS X Mavericks even when you are using it.
Instead of downloading OS X Mavericks from the Mac App Store, you can still download OS X Mavericks to reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718 You will be able to download OS X Mavericks from the Mac App Store when your MacBook Pro uses the same version as all other Macs

PNY PC3-12800 DDR3 memory work in iMac 27-inch late 2013?

Will PNY PC3-12800 DDR3 memory work in iMac 27-inch late 2013? I am setting up a new iMac and also wondered if the iMac will read 24 GB memory. Meaning the original 4X2 and an added 8x2 = 24GB. Any advice on these two questions is appreciated.

Welcome to Apple Support Communities
It should work without any problem, always that it meets these specifications > http://support.apple.com/kb/HT5908
Your Late 2013 iMac supports up to 32 GB of RAM, so you can use 24 GB of RAM without any issue. Also, you will take advantage of Dual Channel, that improves the RAM performance

A few months ago I bought an imac 27 inch late 2013 ... ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ...

a few months ago I bought an imac 27 inch late 2013 .. §16GB - and flash memory) - 3,3 Ghz Intel Core 15
ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ... it is not a HDD problem, because it occurs with my 3TB WD HDD (Time Machine), my 1TB WD and 1TB IOMEGA
any one have a solution? anyone dealt with this problem in the apple care program?

You are still under warranty and/or have AppleCare. Call them. Let them deal w/it.

What are the best affordable external drive options for my iMac ?

Hello,
I am a fairly recent newcomer to Macintosh as my primary personal computing platform. I have recently installed Adobe CS4 Design Premium Student Edition on a late 2006 20in iMac and have several important questions about external hard drives. First of all, everyone knows that using any personal computer (whether you its a Macintosh, or a PC running Windows and/or Linux) without an acceptable way to backup critical data is no different than driving in your car without your seat belt fastened. I need advice for a good external hard disk solution for backup and several other important computing tasks given the following realities
1. Contrary to what I to originally thought, I do not have Firewire 800, but instead have access to dual firewire 400 ports in addition to USB 2.0. My concern over connection speed in regards to Adobe's recommendation to use RAID 0 arrays for scratch disks used by Photoshop CS4. Adobe also recommends that scratch disks for photoshop CS4 are assigned on a hard disk that is not your startup disk. Nontheless, Adobe has no objection to use your startup disk assuming it has plently of Free space (and mine does w/ 189.53 GB available)
2. Do really need RAID 0 to achieve the performance I would need? I had prior Mac based training with Adobe Illustrator, Photoshop, and Indesign, in High school. I have not used this software in 4 years and am not only trying to refresh my skills but to learn the software. In other words I am still in the beginner stage With practice and patience, I will certainly learn the software and use it to the best of my creative energies. Given the situation if my work becomes complex enough over time how important is RAID 0 when I make purchase of an external hard disk? I known that the disk utility in Mac OS X allows the user to create a Raid array. This seems like the cheapest way to accomplish the job. However, the purchase of an external Hard Drive must be able to safely backup my system and also provide adequate performance.
3. Speaking of backup, I am one of those users who is still stubbornly clinging to Mac OS X Tiger. However, updating to a new OS has been required ritual for my previous two PCs. That said given that Mac OS 10.6 Snow Leopard will be out in mere months, I do not see the wisdom now in upgrading to Leopard. After all as a higher education student, money is tight and see Snow Leopard as far more compelling and future-proof upgrade. Snow Leopard is getting better plumbing and will also include Microsoft Exchange Server support (possibly the biggest selling point). I also have interest in using Boot Camp in 10.6 (or 10.5) for running windows software (that are useful for my academics) and games (particularly Half-Life 2 and other Steam games that can run well within my Mac's fairly limited gaming capabilities. If I decide to use Boot Camp I have to partition my internal hard disk. This further complicates finding a very reasonable, affordable, and reliable external disk solution given everything that I have mentioned. Any help is highly appreciated.
Thanks.

I don't think you should worry about the RAID stuff. The only way you could create a RAID is by using external drives, or one those external enclosures with two drives inside. Any speed advantage of such a RAID would be mostly negated by the FireWire 400 connection.
Use your internal drive space for speed critical functions. Use a FireWire 400 external drive for additional storage space, where speed is important but not critical, such as storing your existing media (including your things like your iTunes library files). Use a separate cheaper USB 2.0 external drive for your Time Machine (or whatever method) backup archive, where speed is not that important at all (some people even use a network connection for their Time Machine backup).
You can get a FireWire 800 drive and use an adapter to connect to FireWire 400. The connection won't be any faster on your iMac, but you can use the drive later with a Mac that does have FireWire 800. There are drives that have FireWire 400 and 800, and USB 2.0.
I like the drives sold by OWC
http://www.macsales.com/
I often buy the drive enclosure empty and find a good deal on the hard drive mechanism that I want. OWC sells most of their drives empty. My current Time Machine drive is actually one of these USB adapters
http://eshop.macsales.com/item/Newer%20Technology/U2NV2SPATA/
connected to a Western Digital 750GB SATA drive that I got for about $70. Found that deal through dealmac.com. Couldn't think of a cheaper way to add that large amount of backup space, and it works very well. The internal drive in my iMac is only 160GB, so most of my personal data is on an external FireWire 400 drive; both drives are backed up by Time Machine.

PCI Option For iMac

I own a professional recording studio. The studio and the software I use was purchased with a Mac in mind from the start. Unfortunately after spending far too much money on my mics, outboard gear, mixing console and the rest the bank was broke and a Mac capable of running the studio was not in the budget. I had always had a tower in mind because it always was dominant Mac and could be expanded. Also for one major reason, use PCI based plugins and my interface for recording needs a PCI slot to run as well. With the advances in Mac over the last couple years months the iMac could fit my needs far better than a tower, and with a 24" screen, it would be ideal for mixing. Are there PCI options out there for iMacs, such as something that would plug in via firewire or ethernet? Thought I's ask the experts.
thanks

I hate to disappoint you but iMacs are not designed for expansion. They do not have available PCI slots for third-party cards. For that you need a tower style Mac. You might consider something from the G4 or early G5 Power Mac tower lines such as the QuickSilver or Mirrored Drive Door G4s or one of the earlier G5 models that still have PCI slots. Later G5s have PCI-X slots. Because these are no longer in production they can be purchased used through eBay or some online retailers who vend used/refurbed older Macs.

IMac 21.5 Late 2013 second hard drive

Hi guys!
I have a late 2013 iMac 21.5 with 1Tb HDD and would like to know if it's possible to install a second hard drive, probably an SSD to run OS and programs, leaving the 1Tb HDD there as well using it mainly for storage.
If it's not recommended, than can you suggest a good SSHD as I don't want to have an external HD and would like to combine speed and storage capacity.
Thanks.

You can't add an internal drive, but you can add as much storage as you want via Thunderbolt.

Do I really need to put my library on an external hard drive? Or is still good to leave it on my fusion drive on new iMac?

Previous conventional wisdom seemed to say that it was best to locate your FCP media on an external thunderbolt drive while keeping FCP app on your internal system drive.
I have a new top end iMac with 3tb fusion drive, is it okay to keep the new FCP 10.1 media library on internal drive? If not, why not?
Thank you

Ever since I created my DIY Fusion Drive in my Mac Pro, I have moved my libraries on to it because it is still less then half full.
In the past I had them all spread arcoss internal drives in my Mac Pro in an effort to improve performance.
To me it appear the DIY Fusion Drive is able to do a better job then using three internal drive could do.
Allan

Hard Drive Replacement for iMac G5

My Maxtor 250GB HD is failing and plan to replace with a Western Digital Caviar Blue WD5000AAKS 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s or a Seagate Barracuda 7200.12 ST3500418AS 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s. Would either of these be a good choice or are there any other recommendations?

Quote from a Western Digital FAQ (last copied March 22, 2011) and may need updating):
Mac computers can use WD external drives to boot into the Mac OS; however, not all WD drives can boot both Intel and PowerPC Mac computers. Below is a listing of drives that have been tested with a Mac. The tables separate drives based on their interface (USB/FireWire) and capability to boot Intel or PowerPC Mac computers.
Note: While it may be possible to boot your computer to an external hard drive, Western Digital does not provide technical support for booting your computer using an external hard drive.
The following external hard drives should be bootable on Intel-based Mac computers systems through USB:
My Book Essential Edition
My Book Essential Edition 2.0
My Book Home Edition
My Book Mirror Edition
My Book Office Edition
My Book Premium Edition
My Book Premium Edition II
My Book Premium ES Edition
My Book Pro Edition
My Book Pro Edition II
My Book Studio Edition
My Book Studio Edition II
My Passport Studio
The following external hard drives should be bootable on Intel-based Mac computers systems through FireWire (1394a/b):
My Book Home Edition
My Book Mirror Edition
My Book Office Edition
My Book Premium Edition
My Book Premium Edition II
My Book Pro Edition
My Book Pro Edition II
My Book Studio Edition
My Book Studio Edition II
My Passport Studio
The following external hard drives should be bootable on Power PC based Mac computers systems through FireWire (1394a/b):
WD My Book Premium Edition
WD My Book Pro Edition
The following external hard drives should not be bootable on Power PC based Mac computers systems through USB/FireWire 1394(a/b):
All My Book (+SmartWare)
All My Passport (+SmartWare)
My Book Essential Edition
My Book Essential Edition 2.0
My Book Home Edition
My Book Mirror Edition
My Book Office Edition
My Book Premium Edition II
My Book Pro Edition II
My Book Studio Edition
My Book Studio Edition II
My Passport Studio
My Passport Elite
My Passport Essential
WD Passport
WD Passport (Silver)
The following external hard drives should not be bootable on Intel-based Mac computers systems through FireWire (1394a/b):
All My Book (+SmartWare)
All My Passport (+SmartWare)
The external hard drive must contain a Mac OS Extended (HFS+) partition with GUID for Intel-based computers or Apple Partition Map on PowerPC-based computers. For directions on how to partition and format an external hard drive, please follow the directions below:
. Ensure that the external hard drive is connected to the computer and powered on. Open the main drive (the drive that contains the operating system).
. Open the Applications folder.
. Open the Utilities folder.
. Open the Disk Utility application.
. The drives are displayed on the left side of the window. Click on the drive (the upper listing with the numerical capacity) that you wish to partition.
. Once the drive is selected click on Partition tab.
. Click on the Options button to select the partitioning scheme.
. Click on GUID for Intel-based computers or Apple Partition Map for PowerPC-based ones and then click on the OK button.
. You will see several options for setting up the drive. Once you have selected the number of partitions, the format type you want (Mac OS Extended), and a volume label, click the Apply button. Click the Partition button to confirm your selection and begin the partition operation.
. Following the completion of this process, the drive will appear on the desktop. It is now ready for installing a bootable operating system on it.
Source:
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?p_faqid=1787&p_created=1203707437&p_sid=dO9DFidk&p_accessibility=0&p_red irect=&p_srch=1&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19j bnQ9MjQ4LDI0OCZwX3Byb2RzPSZwX2NhdHM9JnBfcHY9JnBfY3Y9JnBfcGFnZT0xJnBfc2VhcmNoX3Rl eHQ9Ym9vdGFibGUgb24gbWFj&p_li=&ptopview=1
A few basic facts to consider when buying a hard drive:
http://macs.about.com/od/peripherals/bb/exthd.htm

Memory options for iMac

Does the Late 2013 iMac with 3.5 GHz i7 support triple or quad channel memory? I am running Mavericks 10.9.5 with the stock 8GB and trying to find the highest possible memory bandwidth the machine can run.
In other words, will 2x8GB, 3x4GB, or 4x4GB will give the highest speed access to memory? I am not often seeing the used RAM exceed 7GB, so I am not too worried about passing 12GB if triple channel is supported.

BrianAdam3342,
The answer is really pretty simple, iMacs are fussy about upgraded RAM installed. If you want your machine to work reliably follow these three rules of thumb and you will likely be rewarded with years trouble free RAM use. :
Buy high quality RAM from recommended sources such as OWC (www.macsales.com) or Crucial
Stick with the specifications Apple recommends.
Install matched sets of RAM. If you are going to continue using your existing 8GB,
add 2x4GB = 12 GB
add 2x8GB = 24 GB or if you want to max out at 32GB
add 4x8GB = 32 GB
Add the RAM in options 1 & 2 to the 2 empty slots when you open the iMac's RAM door.

Fusion Drive option for iMac 21.5" late 2013

Similar Messages

Maybe you are looking for