Fusion middleware 11g installation steps

Hello,
I am trying to install Oracle Fusion Middleware 11g and found some of the binaries to be installed.Please let me know if these are the software needed and
Also, please confirm which product needs to be installed first. Here, is what my guessing order is currently. Please correct me if I am wrong.
1.     Install Oracle 11g Database
2.     Create Repository for OIM 11g Through Repository Creation Utility(RCU) ofm_rcu_win32_11.1.1.3.3_disk1_1of1
3.     Install Web logic Server wls1033_oepe111150_win32
4.     Install Identity Management 11.1.2.0 ofm_idm_win_11.1.1.2.0_32_disk1_1of1
5.     Overwrite Identity Management 11.1.3.0 ofm_idm_win_11.1.1.3.0_32_disk1_1of1
6.     Install Identity And Access Management 11.1.1.3.0 ofm_iam_generic_11.1.1.3.0_disk1_1of1
7.     Install SOA Component ofm_soa_generic_11.1.1.2.0_disk1_1of1
8.     Overwrite SOA Component ofm_soa_generic_11.1.1.3.0_disk1_1of1
Thanks,
Krish.

Krish,
There are two main installable products in IdM 11g
A) OID/OVD/OIM 11.1.1.4 (current in 11.1.1.5) - You don't need SOA for this and steps to install/configure are documented on my blog http://onlineappsdba.com/index.php/2011/03/23/install-oracle-identity-management-oimidm-11114-oid-ovd-oif-high-level-steps/
B) OAM/OIM/OAAM/OIN/OAPM 11.1.1.3 - You need SOA 11.1.1.3 only if you are selecting OIM . For step by step installation and configuration check
http://onlineappsdba.com/index.php/2010/08/05/oracleidm-11g-step-by-installation-of-oam-oim-oaam-oapm-oin-111130-part-i-load-schema/ (This is 8 part series)
Note : If you are installing 11.1.1.3 then select weblogic 10.3.3 and for 11.1.1.4 select weblogic 10.3.4 ()
Atul Kumar
- Book "OAM/OIM 11g for Administrators" -> http://onlineappsdba.com/index.php/2011/02/23/my-book-oracle-identity-access-manager-11g-for-administrators-is-now-available-in-raw-format/

Similar Messages

Fusion Middleware 11G Installation

Hi,
I have installed Oracle database Server 11G 64 on Windows 7, then Oracle Weblogic 64 with a domain.
Now when I want to install Forms and Reports builders in Fusion Middleware 64 with a jdk 64, the installer asks me first to start a domain, then at the end of the installation it tells me that it cannot start a domain.
I don't know in wich forum I should post this thread.
Many thanks if you can help.

I didn't install on windows 7 but I did find out something on windows 2008 r2 64 bits.
Check if you have a directory name with parentheses in it.
(at the administrator dos prompt type set )
If you have something like Program Files (x86)
in the path or the classpath then that alone is enough to do in the configuration.
(if you have more than one volume you can have more than one of these.)
So one way to get around it is to do this for all volumes:
dir /-x
So you will get your program files (x86) as either progra~1 or progra~2
so you can substitute that in the path and if you have it in classpath
eg:
c:\program files (x86)\myprog\bin; ....
c:\progra~1\myprog\bin;....
worked for me. This may not be the whole problem but it's definitely a show stopper if you have it.
Other people mentioned this before and there's a note about it in support.

Question about Oracle Fusion Middleware 11g.- Installation FORMS

Hello everyboyd,
I am installing Forms version 11. First, I installed Oracle Weblogic Server version 10.3.6. After, I installed Forms 11g R2, but when the installation is in the step Create Dominion, the installation fails. I watch in the logs the follow error:
oracle.as.provisioning.util.ConfigException:
Error al iniciar el dominio.
Cause:
Se ha producido un timeout al iniciar el servidor de administración.
Action:
Consulte los logs para obtener más información.
*     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)*
*     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)*
*     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3040)*
*     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)*
*     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)*
*     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)*
*     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)*
*     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)*
*     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)*
*     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)*
*     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)*
*     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)*
*     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)*
*     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)*
*     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)*
*     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)*
*     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)*
*     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)*
*     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)*
*     at java.lang.Thread.run(Thread.java:662)*
In other log, the error is :
Executing Task: Creando Dominio
XXX: adding task: oracle.as.install.classic.ca.standard.DomainProvisioningTask
AdminServer port is 7001
Creating Weblogic Domain.
Adding Template : C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar
Adding Template : C:/Oracle/Middleware/Oracle_FRHome1/common/templates/applications/classic_template_11.1.2.jar
CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JROCKI~1.0-1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_12.1.1.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\common\derby\lib\derbynet.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\common\derby\lib\derbytools.jar;;
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Could Somebody help I?
Thanks in advance
Carlota Viña Sirgo

Hi Carlota,
Now that the WebLogic and OHS environments are functional, there are some configurations that will be required to set up your Forms environment. Before deploying your own 11g forms, I would test to see if Oracle's test form (test.fmx) can run which is deployed by default in %ORACLE_HOME%\forms. What is supposed to happen is that when you run the URL you are using, Oracle Forms will:
1. Attempt to download the Java Runtime if not installed already. A Java Runtime (JRE) is required to run Oracle Forms 11gR2. The application will try to download the JRE specified in the formsweb.cfg file (sets up the Web environment for Forms) based off the jpi_codebase parameter (if using IE) or jpi_mimetype (if using other supported browsers). Make sure that your browser is able to download the JRE. Alternatively, you may also download a JRE from the Java website http://www.oracle.com/technetwork/java/javase/downloads/index.html. NOTE: Unless you are running Internet Explorer 64-bit (if you simply run Internet Explorer, this is 32-bit), I would download the 32-bit JRE.
2. Attempt to start the test.fmx form deployed in the FORMS_PATH variable. This variable is set in default.env, which is the standard environment variable deployment file for Forms (formsweb.cfg also references this file in the default section). If successful, you should receive a page saying "Installed successfully" as well as show you the version of Oracle Forms you are running (ex. 11.1.2.1.0).
Once those tests are work, if you need any assistance with deploying your own 11g forms, the Oracle Forms 11gR2 deployment guide provides a great source of information to help you get started: http://docs.oracle.com/cd/E24269_01/doc.11120/e24477/toc.htm
Thanks,
Scott (PITSS)

Roadmap / Overview / Steps/Tasks for 11gR2 DB and Fusion Middleware 11g

hello all
is there any website / URL that shows the roadmap or an overview of DB 11gR2 and Fusion Middleware 11g? I found this http://download.oracle.com/docs/cd/E14571_01/install.1111/e10421/overview.htm but lack of the overview together with Oracle DB HOME.
Also helpful will be the steps to check or tasks to complete in assisting with installation of DB11gR2 to Fusion.
Thanks in advance.

Provided that you have enough resources like RAM, diskspace, CPUs etc.
why database on separate OracleHome?
You can use the existing Oracle Home if you want to create a new 11g DB.

Oracle Fusion Middleware 11G B2B Document Type not getting Identified

Hello,
I have installed Oracle Fusion Middleware 11g on my local machine and created a custom document type with proper .xsd definition and XPath Expression Identifier in Oracle B2B interface and configured its trading partners ( Host & Remote ) along with an agreement between the partners.
I have also configured the host listening channel of Generic-File type which picks xml files from my c:\orclsrvs_in folder.
My problem is that the moment I drop any sample file in the expected directory, it gets picked up from B2B , but there isn't any record of the same under Reports and Metrics links.
The Business message, Application message and Conversation message tabs are also not showing any information about the record picked, but in wire message tab, the record is shown in PROCESSING state.
I am not able to conclude whats wrong behind this.. where can i track the logs for the same ??
kindly help to resolve this issue.
Thanks & Regards
Hiteshkumar Chaudhary

Hi Hitesh,
i came to know that B2B extracts the TP name from the filename itselfYes, in case of Generic File, Generic SFTP and Generic FTP, file name provides the necessary values to Oracle B2B to identify the Trading Partner. You can define your own file name format in the Delivery Channel under Transport Protocol Parameters in field "Filename format" (It's an optional field but it is always good to define your own format, otherwise B2B will take it's default format - TradingPartner_DocumentType_Revision_msgType_msgId_replytoMsgID_extension.xml ). Following Filename formats can be used -
%FROM_PARTY%
%TO_PARTY%
%DOCTYPE_NAME%
%DOCTYPE_REVISION%
%MSG_ID%
%TIMESTAMP%
These file name formats can be used in any combination; for example,
%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.dat
Note - Any file extension is allowed.
what are the system parameters to be set in weblogic console and how?? This activity is part of the pre and post installation steps. If you have done those without getting any errors then nothing else is required.
how shall I reinstall XEngine properly ??XEngine is part of B2B installation. If B2B gets installed without flashing any errors then we assume that other components of this part has installed properly.
Regards,
Anuj
Edited by: Anuj Dwivedi, Infosys on Aug 28, 2009 5:51 PM

Cannot start Enterprise Manager for Fusion Middleware 11g

Dear all,
Because I want to install Oracle EGRCM v8.0.1 in Linux x86_64, so I installed Oracle Weblogic 11gR1 and SOA Suite 11g first.
After installation successfully, I created a base_domain as default, and can start weblogic administration server ( http://localhost:7001/console ) successfully.
Now I want to use Enterprise Manager for Fusion Middleware 11g. Per "*Oracle® Fusion Middleware Administrator's Guide 11g Release 1 (11.1.1)*", the EM should be available now and the access URL should be http://localhost:7001/em . But when I try to access it, the following error returned:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
+10.4.5 404 Not Found+
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
So I try to start with emctl in *$MW_HOME/oracle_common/bin/*, the error is as following:
+./emctl: line 387 /d02/Middleware/oracle_common/perl/bin/perl: No such file or directory+.
I check the path and find out that no directory named "perl" under */d02/Middleware/oracle_common*. So I try to copy the necessary dir from the dir installed Oracle Database 11g ( *$ORACLE_HOME* ), but it returns following error:
OC4J Configuration issue. /d02/Middleware/oracle_common/sysman/j2ee not found.
I try to copy necessary dir from *$ORACLE_HOME* but still cannot start EM.
Please give some advise about how I can start EM for Fusion Middleware 11g, any idea is appreciate!
Best Regards,
Kenny Wang

Ravi Jegga wrote:
Hi Kenny
See this post of mine: Re: Fusion Middleware Console
For any SOA Domain, unless you have Enterprise Manager Facet enabled (during domain creation process or adding later on by extending it), you will not be able to access the EM Console. For quick testing, open config.xml file for your domain and check the modules specially em module as shown below. It should be there. This is for one of my SOA Cluster Domains with SOA on top of WLS 10.3.2
<app-deployment>
<name>em</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>C:\beawls1032\user_projects\applications\soaDomainCluster1/em.ear</source-path>
<deployment-order>400</deployment-order>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
Thanks
Ravi JeggaHello Ravi:
I too like Kenny experienced the EXACT same thing this morning. I was trying to figure out how to modify the formsweb.cfg and I remembered from when I install Oracle9i/10g AS a few years back, that it was on the Enterprise Manager Console for forms (different than the EM for the database). Well that's different than the consoles for Weblogic Server and Weblogic Server for Forms. I ran into the same errors Kenny did, and I followed your steps except that I did install into the domain the Enterprise Manager so when I looked at the config.xml I do see the same code that you posted above. Yet I still get the error when accessing
http://computer:7001/em
Also when trying to run emctl (I copied the perl directory from the database) and same error as Kenny. Any tips/clues?
I'm running on Red Hat Enterprise Linux 5, Oracle 11g (database, Fusion Middleware).
Thanks,
Gio

Oracle Application Server 10g/Oracle Fusion Middleware 11g

Hi folks, This question related to migration/upgrade of Oracle Application Server infrastructure.
I see that the Oracle has come up with Oracle Fusion Middleware 11g. Is it the next release of Oracle Application Server 10g. I have the following questions. Appreciate if any one can provide answers to the following questions. Please correct me if my understanding of these oracle products is not right! Thanks
1. What is the future of Oracle Application Server?
2. Is it Oracle Fusion Middleware(OFM) 11g is the upgrade path if one need
to upgrade?
3. Is it expected that expected that customers need(if require) to move to OFM 11g?
4. Does OFM 10g comes with Oracle Application Server? If not what does
it comes with?
5. If it does not, what about customers having applications built using oracle forms and reports? Does OFG 11g
support Oracle forms and reports?
I understand that OFM 10g comes with Oracle web logic server!
Thanks in advance.
movva

To run Forms and Reports in Oracle Fusion Middleware 11g you have to use the distribution "Portal, Forms, Reports and Discoverer" in the FMW 11g software pack.
The structure of what we used to call "the application server" has changed a bit however, in the following way:
- In 11g you need to install the Javaserver WebLogic software (version 10.3.3 for the current Forms 11g version 11.1.1.3) first.
In 10g the installation of the Javaserver (OC4J) was part of the App server install.
Note that you just have to install the software, the configuration script for creating a Forms app server instance creates the WebLogic domain (comparable with the OC4J instance) for you.
- In 11g the Fusion Middleware software installation is separate from the creation of an application server instance.
This is more convenient and comparable to Oracle database and Weblogic installation.
- The Fusion Middleware Configuration script installs two parts of the product: 1. A WebLogic Domain. 2. A Fusion Middleware instance.
The first contains everything related to Java, such as the servlet configuration file (formsweb.cfg), while the latter contains everything that has less to do with the Javaserver
- No more Infrastructure server
The Infrastructure server does not exist anymore. If you want to use Single Sign On with Forms/Reports 11g you can install Identity Management 10.1.4.3 (or use Identity Management 11g, and configure separately the 10.1.4.3 Single Sign On) or keep your old 10g Infrastructure installation.
During installation you just have to specify you want to use OID and SSO and it configures out of the box.
Under normal circumstances the same licenses apply to 10g and 11g (as long as you do not use WebLogic for other purposes).

Oracle Designer 10g (10.1.2.6) + Oracle Fusion Middleware 11g

Hi,
Can Oracle Designer 10g (10.1.2.6 - last release) generated files (*.fmx, *.plx, *.mmx, *.rep...) be deployed onto Oracle Fusion Middleware 11g platform (Portal, Forms, Reports and Discoverer 11.1.1.2.0 + Weblogic Server 10.3.3) without further recompiling?
With regards,
Goran

Mark Striekwold wrote:
In the release notes for Designer 10.1.2.6 there are steps on Configuring Oracle Designer to Work With Oracle Forms 11g (this is a quote from Designer 10.1.2.6 has now been released.
Indeed, there is a note about configuring Designer to work with Forms 11g in the release notes.
Thanks, Mark.
With regards,
Goran

Installing OAM 10.1.4.3 with Oracle Fusion Middleware 11g

Hi All,
I am installing OAM 10.1.4.3 with Oracle Fusion Middleware 11g. The installation issue in creating an OID "start Oracle Internet Directory" was resolved. However, when I am installing OAM identity server it asked for the Configuration DN and Searchbase. I tried to enter dc="myCompany" as Config DN and Searchbase it did not accept. I was really stuck in my installation.
How will I check my searchbase and configdn in Fusion Middleware 11g?
Your help is very much appreciated. I need this ASAP.
thanks.

The product configuration DN is the node into which the product meta-data will be stored.
If your root suffix is dc=abc,dc=com it is considered best practice to define another node such as ou=apps.
The product will create o=oblix under the configuration DN.
I mention this in many of my responses on this forum: If you are trying to get going with OAM without training or professional help, you will find it a tough road. Get some training or bring in someone who knows the product.
Mark

Report Instance not getting started in Oracle Fusion Middleware 11g Report

Hi
Report Instance not getting started in Oracle Fusion Middleware 11g Report Instance Error
Rep-50125 Java.lang.nullpointerexception
I just installed Oracle Forms,Reports 11g 11.1.1.3.0 in my machine
Even I started opmnctl(Oracle Process Management Control). Its too running fine.
Please Guide me the settings need to do to start the report instance.
Regards
Murali N S

Hello,
Copy rwlpr.exe from Oracle_Home\bin to Oracle_Instance\config\reports\bin
Regards

Deploying forms on Fusion Middleware 11g

Hi everyone! I will post my thread in english and spanish.
English:_
I have developed a simple form using developer 11g on a windows pc, and now I want to deploy it on a SLES10 server that has installed WebLogic Server 10.3/Fusion Middleware 11g. The form just has a button. When a user press it, appears a modal window showing a message (WHEN-BUTTON-PRESSED event with a message('') invocation). From the developer´s PC the form works fine, showing the modal window, but when I execute the form from the server using http:\\<server>:<port>\forms\frmservlet?form=<form_name> I see the form in the applet but when I press the button, nothing happens... no modal window, no error, nothing at all. It seems that the trigger is not firing.
Can anyone help me, please?
Español:_
Desarrollé un form trivial utilizando developer 11g bajo windows y quiero desplegarlo en un servidor linux que tiene instalado WebLogic server 10.3 con Fusion Middleware 11g. El form solo tiene un botón que al presionarlo hace un message mostrando en una ventana un mensaje ( evento WHEN-BUTTON-PRESSED invocando el built-in message('') ). Al ejecutar el form desde la pc de desarrollo puedo verlo sin problemas así como también su ventana modal, pero cuando subo el fmx al servidor para desplegarlo, lo veo bien pero al presionar el botón no hace nada. Ni siquiera da error... da la sensación de que no se ejecuta el evento WHEN-BUTTON-PRESSED.
Alguien tiene alguna sugerencia?
Thanx, Gracias!!
Gastón.-

Hi Sid
1. Check if your .EAR file has a .WAR file for the WebServices. It should have a war file. And open war file like in winzip and under Web-Inf you should see a WSDL folder that should have .wsdl and .xsd files etc. Open this .wsdl and look at the URL. Try opening that URL in the browser.
If you EAR do not have WAR file. Select your application -> Right click properties -> Deployment and select your deployment profile and under Application Assembly make sure to check the box for your webservices project.
From Weblogic Admin Console, make sure your EAR is deployed successfully and there also you can expand it and see the WAR module under this. And you should be able to test your webservice wsdl from this war file from one of the tabs in weblogic console.
Thanks
Ravi Jegga

Fusion Middleware 11g (Forms) Application setup

Hi,
This is a requirement in Weblogic server set up for a Fusion Middleware 11g (Forms) Application
I have 2 requirements:
If there is a url say https://abc.world.corp/
1. I wanted to restrict the user from accessing https://abc.world.corp/admin (this is an admin console)
2. I want the user to receive an error message if he types a wrong url like https://abc.world.corp0/ or https://abc.world.cor/
I would like to know how to set up this. Can somebody provide a solution.
Thanks in Advance
Ram

Hi Michael,
Thanks for your valuable inputs.
Below line in CRMS_KR.htm was causing the problem because while directly hitting the CRMS_KR.htm we had hard-coded all the tag values which in other case is read from formweb.cfg
Before:
*<PARAM NAME="serverURL" VALUE="/forms/lservlet?ifcfs=/forms/frmservlet?acceptLanguage=en-us">*
We modified it to
After:
*<PARAM NAME="serverURL" VALUE="/forms/lservlet">*
Now we are able to hit the below URL sucessfully
http://scrmskr.apac.nsroot.net:7801/forms/html/CRMS_KR.htm
Thanks & Regards,
Harish

Fusion Middleware 11g Weblogic, forms and Reports in Solaris 11 zone

Hi,
Any one Installed Fusion Middleware 11g Weblogic, forms and Reports on Solaris 11 zone ??
So Pls Let me know Weblogic and Fusion Middleware 11g versions which are working
I try
Weblogic 10.3.3 Installed 64 Bit Went OK
Fusion Middleware 11g 11.1.1.2.0 Errors While Relink few items like frmbldr etc
Then Fusion Middleware 11g Patchset5 11.1.1.6 Still Same Errors Relink few items like frmbldr etc
Then Cconfig.sh failed at create domain
Regards

Hi Deepak,
Just config.sh or config.cmd file and try to change the JDK with in and try to configure new domain from there.
Regards,
Kal

Can JDev 10.1.3 ADF application run in Oracle Fusion Middleware 11g?

Hi,
We have a 10.1.2.0.2 application server and our JDeveloper 10.1.3 ADF application is running in a separate 10.1.3 home because it was unable to run in the first one. We are thinking about upgrading to Fusion Middleware 11g and I'm wondering if anyone knows will I be able to set it up somehow so that the JDev application runs in this or would I leave it in the 10.1.3?
Thanks
Adam

I dont think this would be feasible till project fusion is through.
Thanks
Tapash

Trouble with Documentation ZIP File for Fusion Middleware 11g (11.1.1.6)

Hello,
I downloaded E23943_01.zip, which is the 2.5 GB documentation set for Fusion Middleware 11g (11.1.1.6), WebLogic 10.3.6. WinZip will not open the ZIP file due to this error: too many entries in central directory according to end of central directory info. My other ZIP programs report essentially the same error as WinZip.
When I first encountered the error, I assumed my download did not complete correctly; but I downloaded it three times, with the same error. All three downloads had the same file sizes, and I even binary-compared two of them, which were identical.
I am suspicious that the source E23943_01.zip file on Oracle's site is corrupt. Can anyone corroborate or refute my suspicions?
Thanks,
effdj

you can download from the edelivery site
https://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11493752

Fusion middleware 11g installation steps

Similar Messages

Maybe you are looking for