Fuzzy lines in youtube from compressing it on Imovie 09

I have tried to get those fuzzy lines out of youtube, when I do the compression for sharing in high quality, how can I get rid of it.
http://www.youtube.com/watch?v=NBSlL-RF7ao

Hi,
Try exporting your HD footage using one of the exports I've marked in green, I believe there is a bug when exporting HD interlaced footage using the exports I've marked in red that will result in the type of problem you are seeing.
If this does not work you may need to export as Apple Intermediate Codec and run it through JES Deinterlacer.
Uploaded with plasq's Skitch!

Similar Messages

  • I can't upload to youtube from the share in imovie

    I have uploaded all my movies using the share feature in the lastest version of imovie. I have tryed 5 times and it loads the whole thing taking just over 25mins for a 6 min clip then it quits the upload process and instead of telling me that i have successfully uploaded do I want to share the upload bar goes away and nothing happpens. I don't see a thing on you tube when  I check it.  help.

    Just setup a viemo account and can't upload to that either.  Just did a apple update yesterday I wonder if that broke something.

  • Ipod to tv white/black fuzzy lines

    please help and advise if im doing something wrong.i have the ipod setting on tv set to on,set at pal(have tried ntsc still same)when i plug ipod into tv to watch video/photos all i get is black/white fuzzy lines across screen,thought at first cable faulty but have now tried a second cable still the same issue.what am i doing wrong has anyone had same problem and sorted it.please advise...thanks

    there will always be ways to get around purchasing something from apple for those who are so inclined. the link i included above shows the difference in wiring, and sure, you can swap / rewire / cut / change your existing cables if you like. it shows you how to wire to an ibook av cable which is the same as a standard DV from what i understand. it's your ipod, and you can plug whatever you like in it.
    me, i personally like to use things the way they are intended, and unless there is a third party, informally endorsed version that does it better, i like to kee it in the family. the ipod is (as the rest of the apple family) an expression of style and a design statement. it's for the same reason i wouldn't want to have a black cord connecting my ears to my music - the white cord(s) are part of the (admittedly grandiose) ipod brand and culture. i don't only use mine in my living room, but for presentations in boardrooms too, and the entire package from my pocket is more impressive than an old lumpy laptop...
    it's personal preference. but IMHO, if you can spring for the apple AV's, i would do it...

  • What is the command line equivalent of the *compress* tool in *Finder*

    I have an automatic build setup for our iPhone Apps. The one issue i face everytime is that the zip file that i create in the build using zip command is always rejected by iTunesConnect server as invalid binary. When i compress the .APP folder manually using Compress from the *Finder menu*, that archive is always accepted. The size of the zip files generated is slightly different.
    Does anyone know what would be the command line equivalent of the Compress used by the Finder ? I want to automate this process so that someone does not have to do a manual compress before uploading it to iTunesConnect.
    Thanks in advance,
    -TRS

    a Mac user wrote:
    That is odd, are you sure you are using the command line correctly then? Because zip-ing from the command line should be the exact same one as from the utility in OS X.
    It's not the same, though. As someone else pointed out, the Finder uses a program called "Archive Utility.app", found in "/System/Library/CoreServices". A quick look at the binary shows that it uses the following Unix command line apps:
    /usr/bin/macbinary
    /usr/bin/file
    /usr/bin/tar
    /usr/bin/applesingle
    /usr/bin/binhex
    /usr/bin/ditto
    /usr/bin/gunzip
    /usr/bin/bunzip2
    /usr/bin/uudecode
    /usr/bin/atos
    I would have to look into how iTunesConnect accepts files.
    iPhone apps are signed binaries, so if one byte is different when they arrive at the app store, they won't be accepted. The command line zip leaves out some information and so the package appears to have been tampered with and they're rejected.
    charlie

  • Fuzzy lines

    Does anyone know or can suggest what settings to use in videora, when converting to ipod use, for videos, so i do not have the fuzzy lines? im not too sure what happened to the volume either, if anyone has encountered this problem and overcome it and can offer help, would very much appreciate it,
    many thanks in advance

    Thanks Colin
    I am using vectors.
    I have been experimenting and reading and it seems that the iPhone just doesn't like vectors especially on a timeline.
    Export from flash to a png and then reimport and its lovely; rather frustating.
    I experiment on ...

  • Fuzzy line on the middle of display.

    Recently i have found a fuzzy line in the middle of my retina macbook pro screen (15"). I have always treated it very well, it never falled down.
    The line appear only with a strong light from sun, especially with dark backgounds on the screen.
    The line seams like dust, it's not like a crack. It has a lenght of 9cm long and an height of 1mm.
    I understand that the problem is probably related to how i used the mac, but i don't undertand the cause. The only thing have done is replacing the Spek cover, but two or three weeks before now. What do you think? Have I to replace the screen? How much does it cost?
    Hope you can help me.
    Olivum
    Sorry for my bad english

    Warranty is worldwide. He can take it to a Dutch Apple Store without worrying
    Best of luck.

  • JavaFX Canvas : "fuzzy" lines compared to Swing

    Hi,
    I would very much like to port my Swing application (that draws on a JComponent) to JavaFX. But to my dismay the JavaFX Canvas does not draw as sharp and thin lines as Swing does.
    Lines drawn with the same thickness is noticeably thicker (and "fuzzier") on the JavaFX Canvas than the equivalent Swing lines. I have tested both on Windows (7) and Linux, both 64-bit.
    In my JavaFX app, I proceed like this: gc.beginPath() --> gc.moveTo(..) --> gc.lineTo() --> gc.stroke().
    Is there a setting or something I am missing?

    You need to take into account the coordinate system.
    For further explanation of why this works see the answer to the question below and Node's javadoc:
    http://stackoverflow.com/questions/11881834/what-are-a-lines-exact-dimensions-in-javafx-2
    http://docs.oracle.com/javafx/2/api/javafx/scene/Node.html
    At the device pixel level, integer coordinates map onto the corners and cracks between the pixels and the centers of the pixels appear at the midpoints between integer pixel locations. Because all coordinate values are specified with floating point numbers, coordinates can precisely point to these corners (when the floating point values have exact integer values) or to any location on the pixel. For example, a coordinate of (0.5, 0.5) would point to the center of the upper left pixel on the Stage. Similarly, a rectangle at (0, 0) with dimensions of 10 by 10 would span from the upper left corner of the upper left pixel on the Stage to the lower right corner of the 10th pixel on the 10th scanline. The pixel center of the last pixel inside that rectangle would be at the coordinates (9.5, 9.5).
    import javafx.application.Application;
    import javafx.scene.*;
    import javafx.scene.canvas.*;
    import javafx.stage.Stage;
    /** JavaFX Canvas : "fuzzy" lines compared to Swing JavaFX Canvas : "fuzzy" lines compared to Swing */
    public class FuzzyCanvas extends Application {
      public static void main(String[] args) { launch(args); }
      @Override public void start(Stage stage) {
        Canvas canvas = new Canvas(50, 50);
        GraphicsContext gc = canvas.getGraphicsContext2D();
        gc.beginPath();    // fuzzy line.
        gc.moveTo(10, 30);
        gc.lineTo(20, 30);
        gc.stroke();
        gc.beginPath();    // clean line.
        gc.moveTo(10.5, 39.5);
        gc.lineTo(19.5, 39.5);
        gc.stroke();
        stage.setScene(new Scene(new Group(canvas)));
        stage.show();
    }

  • Iphine 5 - fuzzy lines when downloading an app

    I brought an Iphone 5 yesterday and i think its really good apart from one little problem. Every time I insert my password to download an App fuzzy lines appear (as if you have dropped a phone, which I havet.) Has anyone else have this problem? Its a little issue but when you have spent over £500 on the phone its very annoying

    I phoned apple and they told me to restart to factory settings  and set it up as a new phone then restart it again but do it from youtr back up. So  far it worked

  • Freezing, fuzzy lines

    Whilst using my ibook g4 today I clicked on explorer and all of a sudden a load of little lines started to flick on the screen and the screen froze. I have re started my computer a number of times since and heres what happens
    1.The grey screen comes up with apple logo and spinny thing then freezes
    2.Goes through to a blue screen and freezes
    3.Gets to the desktop display and then freezes with fuzzy lines
    I have tried the fsck -y(think thats the right thing), and it says everything is fine. I have inserted my osx restore disk only to have that freeze aswell with the fuzzy lines.
    I have managed to firewire all the documents onto my G5 so i dont mind wiping anything.
    Any suggestions would be much appreciated
    Trev

    Hello Trev
    Given that your machine works in target mode (I assume this is how you got your data off) you may be able to run disk utility from your G5 and see if that shows up anything amiss.
    If not then it is either get hold of a copy of diskwarrior which can help or go for a clean install. Make sure you go for a secure disk formatting option (Zero all data) as this will map out any bad sectors on your drive.
    You havn't by any chance got Norton on there have you? Had a couple of freinds who's machines have gone west with similar symptoms as a result.
    S.

  • I'm getting "an error occurred loading this content" when trying to airplay youtube from my iPhone 5.  My brother is using his iPhone 4s with no problem.  Is there something wrong with my settings?

    I'm trying to airplay youtube from my iPhone 5 but I'm getting the error message.  I can airplay music, pictures, and other video, but no streaming.  My brother is using my appletv and wi-fi with his iphone 4s with no problems.  Any suggestions?

    I started having this problem a week or so ago, after having used the Apple TV for a couple of months with only some minor problems.  Yesterday, however, I started getting this problem again and today I could not get to Airplay from my Ipad - just kept getting the "error occurred" message on my tv screen.  I tried the various fixes I could find on Google - at least the ones I could understand - but with no luck.  Then I decided to bite the bullet and pay for Apple support, even tho the problem is with the device and not due to my ignorance.  So I talked with a support person who said I would have to pay $19.95 for 30 days of support and was glad to take my credit card information.  This person had never heard of the problem, and ending up bumping me up to an Apple TV specialist, after spending 20 minutes or so on hold, and explaining the problem, etc.  I finally got to the specialist who had heard of this problem and said that she was crediting me for the $19.95, since the problem is due to a KNOWN HARDWARE ERROR.  In fact, she said that Apple would give me a new, replacement unit if I would go to the nearest Apple store.  This even tho I bought the unit used - it is still covered.  Now I have to make a 100 mile round trip to the Apple store, since Apple won't send the new one out in the mail, even if I return mine first.  And Apple won't pay for my gas.  So that's the mostly good and some bad news.  I hope that the new unit won't have this problem, but I think the bigger issue is that since Apple knew about the problem that affects certain serial numbers, why don't they post that information on their support sites or just make it findable by a Google search.  Whenever I have had a problem with Windows, I have always been able to find a Microsoft article or fix addressing it by doing a Google search, but Apple, always desiring to be arcane and opaque, isn't interested in this approach.  In fact, why not just put together a "known problems" site for Apple products so that users can find this kind of information easily, without having to put out $19.95 for technical support that isn't needed, and wasting their own time (and money, as in my case, for gas).  The bottom line is that all of the people with this problem who posted (and there are many) were apparently ignorant that Apple KNEW ABOUT THE PROBLEM AND WILL REPLACE THE BAD UNITS.  This is because, I am sure, they don't want to shell out the $19.95.  Anyway, hope this helps someone.  I doubt if Apple will listen to the suggestion.   Good luck..

  • All videos are literally cut in halves, they are separated by a green horizontal line. all videos from well known sites.

    all videos are literally cut in halves, they are separated by a green horizontal line. all videos from well known sites.

    Disable the hardware acceleration in the Flash Player.
    See [[Cannot view full screen Flash videos]]
    * http://www.youtube.com/swf_test.html (right-click the player: Settings)
    Flash "Display settings" window:
    * http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

  • F4IF_INT_TABLE_VALUE_REQUEST - what line was selected from list displayed

    I am building an internal table and displaying it as search help using F4IF_INT_TABLE_VALUE_REQUEST.  How can I tell what line was selected from the search help?  Only one field is filled with the selection, but there are several other fields attached to this that I need in my program - but I can't tell which line was selected, and the one field is not enough information to use to get the record from the internal table.

    Hi,
    RETURN_TAB would have the selected values.
    FIELD_TAB will have the hit list fields.
    DYNPFLD_MAPPING will have the Assignment of the screen fields to the internal table.
    Regards,

  • How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

    How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

    Hi.
    You simply can't. Snow Leopard is compiled in Intel binary only.
    Good Luck.

  • PO line item details from BAPI_PO_GETDETAIL1 and append to BAPI_PO_CHANGE

    Hi,
    The requirement is to get PO line item details from BAPI_PO_GETDETAIL1 and save it in the internal table and append that internal table into  the BAPI_PO_CHANGE.
    But i am getting dump in this program.
    TABLES: ekpo.
    DATA: BEGIN OF po_details.
            INCLUDE STRUCTURE BAPIMEPOITEM. "Include the structure of Dictionary Reference.
    DATA: END OF po_details.
    DATA: BEGIN OF po_details1.
            INCLUDE STRUCTURE BAPIMEPOITEM. "Include the structure of Dictionary Reference.
    data: END OF po_details1.
    DATA: it_po_details LIKE STANDARD TABLE OF po_details,
    wa_po_details like line of it_po_details.
    data: it_po_details1 like standard table of po_details,
    wa_po_details1 like line of it_po_details1.
    PARAMETERS: p_ebeln LIKE ekpo-ebeln DEFAULT '4500000016'.
    CALL FUNCTION 'BAPI_PO_GETDETAIL1'
      EXPORTING
        PURCHASEORDER = p_ebeln
      TABLES
        POITEM        = it_po_details.
    loop at it_po_details into po_details.
      read table it_po_details into wa_po_details with key PO_item = p_ebeln.
      move-corresponding po_details to po_details1.
      CALL FUNCTION 'BAPI_PO_CHANGE'
        EXPORTING
          PURCHASEORDER = p_ebeln
        TABLES
          POITEM        = it_po_details.
      append po_details to it_po_details1.
      LOOP AT it_po_details1 INTO wa_po_details1.
        WRITE:/ wa_po_details1-PO_item,
           wa_po_details1-MATERIAL,
           wa_po_details1-SHORT_TEXT,
           wa_po_details1-PLANT.
      ENDLOOP.
    endloop.

    HI,
    1st you check for the following following  authorization objects are checked:                                                                               
    M_BEST_BSA (document type in PO)                                                                               
    M_BEST_EKG (purchasing group in PO)                                                                               
    M_BEST_EKO (purchasing organization in PO)                                                                               
    M_BEST_WRK (plant in PO)          
    and to change the PO below is the eg for changing the short text:-
    TABLES: ekpo.
    DATA: BEGIN OF po_details.
            INCLUDE STRUCTURE bapimepoitem. "Include the structure of Dictionary Reference.
    DATA: END OF po_details.
    DATA: BEGIN OF po_details1.
            INCLUDE STRUCTURE bapimepoitem. "Include the structure of Dictionary Reference.
    DATA: END OF po_details1.
    DATA: it_po_details LIKE STANDARD TABLE OF po_details,
    wa_po_details LIKE LINE OF it_po_details.
    DATA: it_po_details1 LIKE STANDARD TABLE OF po_details,
    wa_po_details1 LIKE LINE OF it_po_details1,
    poheader  LIKE  bapimepoheader,
    return  LIKE STANDARD TABLE OF  bapiret2 WITH HEADER LINE,
    poitemx LIKE STANDARD TABLE OF  bapimepoitemx WITH HEADER LINE.
    PARAMETERS: p_ebeln LIKE ekpo-ebeln DEFAULT '5600010646'.
    CALL FUNCTION 'BAPI_PO_GETDETAIL1'
      EXPORTING
        purchaseorder = p_ebeln
      IMPORTING
        poheader      = poheader
      TABLES
        poitem        = it_po_details.
    LOOP AT it_po_details INTO po_details.
      READ TABLE it_po_details INTO wa_po_details INDEX 1.
      MOVE-CORRESPONDING po_details TO po_details1.
      MOVE: po_details-po_item TO poitemx-po_item,
            'X' TO poitemx-short_text.
      APPEND poitemx.
      CALL FUNCTION 'BAPI_PO_CHANGE'
        EXPORTING
          purchaseorder = p_ebeln
          poheader      = poheader
        TABLES
          return        = return[]
          poitem        = it_po_details[]
          poitemx     =
          poitemx[].
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
      APPEND po_details TO it_po_details1.
      LOOP AT it_po_details1 INTO wa_po_details1.
        WRITE:/ wa_po_details1-po_item,
        wa_po_details1-material,
        wa_po_details1-short_text,
        wa_po_details1-plant.
      ENDLOOP.
    ENDLOOP.

  • Create a report same as KSB1 and add WBS line item details from CJI3

    Hello Everyone,
    I need to create a report exactly like KSB1 which should have a selection screen exactly like KSB1 but it should also display the WBS line item details from CJI3.
    What is the right way of doing it? Please advice.
    COEP is pretty huge in Production, and we need to fetch data by a specific date in selection screen or a cost center group. This can take a long time to fetch data from the table based on selection screen input. Are there function modules or do we need to use some other tables to fetch data same as COEP?
    Thanks for all your help.
    Regards,
    Shipra.

    Hai ,
             Please go throuth the note  325546  , u need to implement the customer exit  COOMEP01 .
    regards,
    K.Vinay kumar

Maybe you are looking for