FYI Canon Pixela Editor won't work on Win7-64

While I wait for the education store I use to get their stock of CS5 to sell (they now say May 20) I thought I'd install the Pixela software that came with my Canon HFS100 camcorder to do some testing of the AVCHD files
The software seemed to install OK into the X86 part of Win7 64bit, but then the first time I tried to use it, it had to install a USB driver to connect to the camera... and failed
I uninstalled the Pixela software and used the card reader I bought to copy the MTS files to my data drive
The Win7 Media player will play the files (WOW! is my reaction, compared to the SD files created by my old analog camera) so I know the camera is working OK (I think I need to do some reading on external microphones... the two built into each side of the lens are not that great)
I'll just have to wait until I can get CS5 installed to do anything with the MTS files I create and copy to computer

to calculate how much video ram is needed one
take
the vertical number of pixels and * with horisontal number of pixels and * with 32bit colour which is 4 bytes
so if it's the 13" macbook air
1440 * 900 * 4 = 5.184MB for main display
+
2560 *1440 *4 = 14.75MB for second display
sounds like the intel hd 5000 would have that as dedicated memory even if the windows driver did not allow to use shared system mem as extra
could be a problem with the driver for windows
maybe a person who ran a setup like yours would have more to contribute with
my setup is an imac 21" with amd video card and a 24" dvi dell monitor and that works fine in windows so it's a different animal altogether

Similar Messages

  • My Canon LIDE 600f won't work on my Mac Lion

    I've downloaded a driver from Canon, and at someone else's suggetsion, a Canon toolbox, but:  My Canon Scanner LIDE 600f won't work on my Mac Lion.  Any ideas?

    With the scanner driver installed and the scanner connected to the Mac, if you open System Preferences > Print & Scan, is the scanner shown in the list of devices? If not, are you able to add the scanner?
    And if you open Image Capture located in Applications, does this show the 600F in its list and peform a scan if selected?

  • Canon LIDE210 scanner won't work with 64 bit arch.

    I have a Canon LIDE 210 flatbed scanner which is supposed to be fully supported in linux - for many many months if I plug it in, and start up GIMP to use the scanner plugin - initially it looks like it will work but although it successfully completes a preview scan, if I ask it to do a full scan of a page or section of page it makes abnormal noises, and ends up usually screaming as if in pain, and then the sane application hangs. This is if it is plugged in to a laptop with usb3 cable connecting the laptop to the scanner, and running 64 bit arch.  Yet the same scanner plugged in to a laptop which only has usb2 ports, and running 32 bit arch works flawlessly running the scanner in the same way.
    I expect that the 32/64 bit arch issue is not relevant, and it is some problem with the usb3 drivers not being compatible with the usb2 capability of the scanner that is causing the failure.
    I have seen some suggestion (from a Ubuntu forum) to "In the UEFI/BIOS change the setting under USB configuration, "XHCI Pre-Boot mode" from enabled to disabled. In some BIOS configurations this setting is known as "XHCI Mode". Is there a better way to resolve this since usb3 external drives and usbkeys work fine without this change on the same machine.
    Does anyone have any experience with running usb flatbed scanners via a usb3 port, and if so is there a workaround that is known to work with this particular scanner? I have seen the thread at https://bbs.archlinux.org/viewtopic.php?id=184816 which also did not lead to a solution.
    It would be nice to find a way to deal with this although perhaps a newer linux compatible scanner that is equivalent to the LIDE 210 is available that is compatible with usb3?

    Hi Steve,
    The Canon Australia web site is only showing v4.5.1.2 of CanoScan Toolbox for the LiDE35 (same version for Windows and Mac). There is no mention of v5.0.1.3 being supported by this model so this could explain the application is unable to locate it. The applications typically have a built-in list of support devices and if the 35 is not in this list then it won't work. Again with reference to the Canon web site, the LiDE 600F and 70 show v5.0.1.4 of CanoScan Toolbox. Later models, such as the LiDE 100 and 200 released last year, don't use the Toolbox application. Instead they work with MP Navigator or OS X apps like Preview.
    Pahu

  • Canon LiDE35 scanner won't work with latest CanoScan software

    I upgraded my MacBook Core Duo (2006) to Snow Leopard this weekend. All fine except even after loading the latest Canon Driver (lide35osx7721en.dmg) and restarting, then using CanoScan Toolbox 5.0.1.3 -- I get the message "Can't find Driver".
    If I go back to 4.5.1.2 version of CanoScan - it works OK! But the 5.0.1.3 software is easier to set, gives lots of choices - it should work, right? Has anyone tried this or can anyone comment. (I never got 5.0.1.2 nor 5.0.1.3 to work with Leopard either - but hadn't updated the DRIVER - now I have but it still can't "Find" the driver!)
    Thanks for any comments here - at least I can scan - and sure, maybe I could update this 5 year old scanner - but it works great!
    Best regards,
    Steve Schulte
    Tuesday 27 April 2010

    Hi Steve,
    The Canon Australia web site is only showing v4.5.1.2 of CanoScan Toolbox for the LiDE35 (same version for Windows and Mac). There is no mention of v5.0.1.3 being supported by this model so this could explain the application is unable to locate it. The applications typically have a built-in list of support devices and if the 35 is not in this list then it won't work. Again with reference to the Canon web site, the LiDE 600F and 70 show v5.0.1.4 of CanoScan Toolbox. Later models, such as the LiDE 100 and 200 released last year, don't use the Toolbox application. Instead they work with MP Navigator or OS X apps like Preview.
    Pahu

  • Canon MP780 printer won't work on Lion

    I've recently upgraded my Mac to one running Lion 10.7.2.
    My Canon PIXMA MP780 no longer works. The icon is sitting in the dock with a no-entry sign through it.
    I've downloaded new software and drivers for it, restarted, deleted and re-added the printer via System Preferences, and am really not sure what to do next...
    Have emailed Canon who can take up to 5 days to respond.  I'd like to do some printing before that if I possibly can.
    One thing I wasn't able to do that Apple recommend here: http://support.apple.com/kb/TS3147 is to reset the printing system.  The dialogue box they refer to doesn't contain the 'reset printing system' option they refer to here: http://docs.info.apple.com/article.html?path=Mac/10.6/en/14001.html
    Would be most grateful if anyone has experience of this or knows of a fix.
    Many thanks!
    Helen

    I have the same problem!  I upgraded software and the Canon MX780 printer just went away.  Print & scan has the Canon MX870 series put only the scan options.  However, I can still print from a networked laptop.  Just like I always could.  Thinking of importing the laptop DMG and trying to install it.  Canon site has only a scanner driver.
    Apple support site tells me that Canon printer driver for MX870 is"
    Canon MX870 series
    10.51.2.0
    P
    Like I said I can print from a networked laptop.

  • I recently install Lion OS on my iMac and just found out that my Canon 4400F scanner won't work with Lion, what can I do to get it working again?

    I am having trouble with some of my previously installed software before installing the New Lion OS. I just found this evening that my Canon 4400F Scanner will no longer work with the new OS. I need to know if there is a solution for this short of buying a new scanner? I am also upset that my Microsoft Office Professional will no longer boot as well. Anyone know why this took place?

    If it will not longer work due to Lion, it's most likely becasuse no drivers for Lion have been released.  No way to get aroud it other than going back to Snow Leopard.  MS Office wont work if it is '04 or earlier becasue it is a PPC application.  Mac switched from PPC to Intel in 2006 and created the Rosetta emulator to allow companies to make their software compatable or allow users to buy new software.  After 5 years, Rosetta support was dropped, with the release of Lion.  No way to get this software to work with Lion.

  • Tools in PSE8 editor won't work properly

    Sometimes I cannot use the tools in the editor. I only get the "hand" no matter what tool I choose, and even if I quit PSE completely and reload the program again, the hand is still there. The only way to get the tools to work is to reboot the PC and reload PSE. Any clues?
    ØØ

    Strange...
    Clear Editor Preferences once and see if it makes any difference....

  • Help with Adobe Premiere Elements 11 Editor - Won't work after Maverick upgrade

    I bought Adobe Elements 11 in March of 2013.  It was working fine until upgrading to Maverick.  It will not open now.  Adobe will not help without a serial number.  Apple does not provide serial numbers when you buy directly from the App Store.  After 3 hours of trying to unintall and reinstall, no luck.  Apple said to call Adobe back, Adobe says to call Apple.  Finally just asked Apple to refund me the $85.00.  They said said they ‘can’t’ since I’ve ‘had it for so long’ (7 months ?? ).  They said the problem was my fault because I didn’t check and make sure Adobe Elements was compatible with Maverick before installing Maverick.  I should mention that it states (on the App Store page) that Adobe Elements 11 is "compatible with OS X 10.7.5 or later”.   Just wondering if anyone else has experienced this problem and if any kind of resolution was achieved?   Again, any help would be greatly appreciated. 
    Tony

    Yes and no help.
    See discussion
    Please visit http://www.adobe.com/support/contact if there are more questions for Adobe. Thank you.
    General Info
    Chat start time      Dec 13, 2013 6:52:37 AM EST
    Chat end time      Dec 13, 2013 7:08:55 AM EST
    Duration (actual chatting time)      00:16:18
    Operator      Vaibhav
    Chat Transcript
    info: Hi, there are several customer(s) in line ahead of you. We'll be with you as soon as possible. Thank you for your patience. 
    You might also try our community forums, where experts are online 24/7.  
    info: You are now chatting with 'Vaibhav'
    Vaibhav: Hello. Welcome to Adobe Technical Support.
    Vaibhav: Please allow me a moment while I look into your account & verify the details.
    Jerry: okay will wait
    Vaibhav: Can you elaborate the issue please?
    Jerry: I've been trying to open the app, its does not open it give me an error
    Vaibhav: Well we are getting many customer with this issue
    Vaibhav: premiere elements 11 is not compatible with MAC 10.9
    Jerry: okay what are you doing to resolve the problem
    Vaibhav: Well if there will be any update we would inform all the customers right now we have send this to engineering
    Jerry: A friend of mine was sent a link that allowed them to reinstall the application and they were also given a serial number as well can't you do the same for me I really need to use this application asap
    Vaibhav: for this you need to contact customer services or sales
    Jerry: I'm not looking into buying a new copy I NEED HELP!!!!!!
    Vaibhav: Well we can not help in this case as this version was released before mac 10.9
    Vaibhav: and if you want to use it on MAC 10.9 you would need to purchase Premiere Elements 12 and for that need to contact sales
    Jerry: It looks like I am not going to get the same help as every one,just no that you've lost a customer in me
    Vaibhav: Well there is nothing that we on chat or phone can do in this
    Vaibhav: Thank you for contacting Adobe. Good Bye.
    info: Your chat transcript will be sent to [email protected] at the end of your chat.

  • Canon MX7600 scanning won't work with Lion

    Canon tech support tried downloading and installing latest software, throwing out old stuff, etc.., but finally concluded the problem lay with the operating system. Any thoughts?

    Thanks for your response, Pahu. The scanner drivers are both installed. Also, I just downloaded and installed Apple's latest Canon printer drivers, released today, and restarted. When I open Image Capture it says "No scanner or camera attached." The printer is connected via USB and will print. Also, attempting to scan from the Canon Solutions Menu produces an error message: "The scanner driver supported by this software is not installed. Install it and then retry."
    If I connect a NeatReciepts scanner, it does show in Image Capture and does scan.
    I've opened a trouble ticket with Apple.

  • Flash Player is enabled but won't work on Win7 running IE 11

    I have reloaded flash player and followed online directions to ensure security settings are correct and disabled Active X

    "User-Agent Strings"
    That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
    Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
    The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
    Microsoft has no plans to "fix" the mess thay've created because they think it's a great idea to block you out of the websites you visit.
    They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

  • Help with Premiere Elements 3.0,  won't work with Win7 Home Prem 64bit

    Does anybody knows if there's a patch or update for Premiere Elements 3.0 for Win7 Home Premium 64bit?  This software is a little bit old, but works great with my WinXP pro.  When I upgraded to Win7 Home, 64bit, Premiere Elements 3.0 would not work at all.  At first, I thought it was my hardware, but the software just crashed even without any video capture devices connected to my computer.  Any help is appreciated.
      Thanks!

    Well, there's no guarantee version 3 will work on Windows 7 at all -- let alone the 64-bit version.
    Have you installed the 3.02 patch for the software? That makes it Vista compatible -- and if anything will make it work, that will.
    Otherwise -- and assuming you've got the latest firmware for your video card and the latest version of Quicktime -- if it doesn't work for you, it simply may not. Sorry.

  • Basic host scan (CSD) won't work with Win7 (64-Bit)

    Hi all,
    We got a customer with an ASA5510, Cisco Secure Desktop (3.6.5005) and Host Scan Engine 3.0.07042 for SSL Web-VPN.
    There are some basic host scan checks, like windows process names / AV during login.
    On the endpoints with Windows 7 (32-Bit) and Windows XP, the "debug dap trace" shows, that the host scan recognize the status of the process.
    On Windows 7 (64-bit) unfortunately not. The AV check is working properly.
    Is there an issue with 64-Bit?
    Any ideas?
    Thanks,
    Norbert

    since bootcamp allows windows to run natively, it's not an imac issue, but rather an issue with your windows, so you probably get better answers in a windows forum or the crysis forums.
    in any case, installing newer ATI drivers (ati.com) might help, but it's just a wild guess

  • Ethernet port won't work on Win7 from Bootcamp install?

    hey guys, i was just trying to install Win7 via Bootcamp. Win7 boots up with no issues at all, but i can't connect to the internet because the ethernet isn't picked up or it doesn't work. i must have done something wrong in Bootcamp -- what can i do?
    thanks

    Did you install the Boot Camp drivers for Windows?
    You can download them if you haven't already from Boot Camp Assisstant.
    Open Boot Camp Assisstant (/Applications/Utilities/Boot Camp Assisstant.app) and click on continue. On the next page tick only "Download the latest Windows support software from Apple". Click on Continue again, and then save them onto some external storage you will be able to access from Windows. Once that is complete, restart in Windows, connect your external storage, find a folder on it called WindowsSupport, open it, and double-click on setup.exe. This will install drivers for all of your Mac's hardware, including the Multi-Touch Trackpad, access to HFS storage volumes, and most importantly, ethernet.

  • I have a Canon D60 camera, my raw files won't work with the raw converter in my Photoshop CS5. Do I need CS6?

    Photoshop CS5 won't work with the raw files from my new Canon D60 camera. Do I need CS6?

    A Canon EOS D60? It had support since Camera Raw version 1.0.

  • My flash won't work on my canon !

    My flash won't work on my canon powershoot sd600 after I dropped it.  Help?Fl

    Hi Violets!
    To start the process for getting your PowerShot SD600 repaired, you'll need to complete a Repair Request on our website.
    Alternatively, you may participate in the Canon Loyalty Program.  The Canon Loyalty Program option allows you to replace your current camera for a discounted fee, plus shipping.  The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.  
    If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight.  Let them know you have been working with online support and the Canon Loyalty Program was offered.  Be sure to have your serial number for your camera at the time of your call.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for