G/L Description not showing in Query designer for Characteristic values

Hi Friends,
We have developed a report and that we have made two New selections on the object 0GL_account....some GL Account number are grouped in that. While selecting the GL Accounts to new selection, it is showing GL Account number and Description. After that, the selected objects are not showing the Description in the query designer. It is showing GL Account number only for the both Technical name and Description. I Would like to see Description of the GL Accounts in the Query designer. i have plan to delete certain account based on their dercription.
And at the Infoobject description in the Business Explorer tab Display feild it is set as Text and Key. And till yesteday it shown the Description for the Account numbers. The daa loads are also .gone fine.
Can you please guide me in this regards
Thanks & Regards
Anand

Hi Thanks for your reply.
The accounts which we selected are having Description and it is showing while selection the selected GL Accounts.
And the master data also is in active...When i try to activate the master data Agoin it is saying statement "Master data for characteristic 0GL_ACCOUNTactive"
Any more suggetions..........
Regards,
Anand

Similar Messages

IP - Aggregation Level not showing in Query Designer as infoprovider

Hi guys
I just started implementing Integragted Planning at a new client. I created an aggregation level to build my input ready query. However this aggregation level is not available as an inprovider in the Query Designer nor is it available under the infocube in RSA1 on which the aggregation has been defined.
Any suggestions?
Thanks for your help.
Ameya Kulkarni

Hi Mayank
Good point. But I could not see the aggregation level whatsoever in RSA1. The aggregation level is consistent and activated but does not show in the query designer.
I was wondering if there is some configuration that I have to do to get the aggregation level available in the query desginer.
Please let me know.
Thanks,
Ameya Kulkarni

Why some times jdeveloper does not show a coreect design view ?

Hi
thank you for reading my post
why jdeveloper does not show a correct design view of jsf pages sometimes?
It does not shows labels and ... , just show tag names like : form , ... ?
here is a picture for this :
1-incorrect page:
http://www.flickr.com/photos/59086726@N00/217556594/
2-correct page :
http://www.flickr.com/photos/59086726@N00/217556595/
I just closed and open the IDE and page designer shows incorrect pages
thanks

Also try this...go to the project properties for the View project. Look at the JSF Libraries and remove the two JSF libraries and then re-add them....this sometimes helps.
Regards
Grant Ronald

Infoobject in infoset but not displaying in query designer

Hi,
I have created a query on infoset(ods1 & ods2).
a custum defined infoobject (fiscyr) is not displaying in query designer while it is present in infoset.
pls give your inputs,for why this infoobject is not available in query designer.
Thanks
Radika

Hi Radika,
I cannot think of anything other than the solutions already mentioned in this thread (checking the IOBJ in infoset, running RSISET and activating it). I just had a foolish idea that you might not be looking for the right IOBJ. All the IOBJs from an infoset are not displayed with their original technical names in the query designer. They are disdplayed in the format: <infoset_technical_name>_FXXXXX where XXXXX is a number.
Also try one more thing. Go to transaction RSISET and type in the technical name of the infoset there.
Right below the box where you type the Infoset name is a check button. Check your Infoset there and then activate it from within the RSISET transaction (the activate button is right after the check button). With Infosets, sometimes just activating it from within RSA1 does not work but RSISET always seems to work.
Do this and see if it helps.
Thanks & regards,
Nikhil

Mapped characteristics in Multiprovider not available in Query Designer

Hi,
we have a multiprovider with approx 10 cubes and lot of characteristics, Navigational attributes mapped to it. I have added around 3 more characteristics and mapped to underlying cubes. But these added characteristics are not visible in Query designer. Is there maximum limit for the number of characteristics.
Thanks,

Disconnecting the BEx made it work. But i dont understand i added this yesterday in the multiprovider. But i also removed some navigational attributes from the mapping. I will re-map and check. Thanks for the tip.

Hierarchy node not available in Query Designer

Hello Gurus,
I can find the hierarchy node variable in BW but it is not available in query designer. Does anyone know what might be the problem and a solution?
Thanks,
Mark

Hi Mark,
You said you "find the hierarchy node variable in BW but it is not available in query designer".
How did you find the hierarchy node variable in BW? From backend SAPGUI, you will only be able to see the variable in some internal tables like RSZGLOBV. Did you mean this?
For "it is not available in query designer", do you means that when you want to create a hierarchy node variable for this characteristic in Query Designer, you don't find this certain hierarchy node variable in the hierarchy node variable list?
Important thing to notice is that, flat value variables and hierarchy node variables are listed separately. Did you make sure that you have chose to list hierarchy node variables in Query Designer?
Regards,
Patricia

Website page description not showing

Hi
please could someone help. I'm updating this website and trying to correct this problum for this website deedeekaye.co.uk page description not showing is not showing in Google. When you type the url in the Google search field it will show the domain as deedeekaye.co.uk with no Page title and also the
A description for this result is not available because of this site's robots.txt – learn more.
It is a wordpress site and I cant seam to find the option on the theame for this.
Shoud I just Hard code this in the header.php file? Thanks

Daniel Waddon wrote:
HI WolfShade
thanks for the comment and no its not I allready have that in the site root
User-agent: *
Disallow: /cgi-bin/
That's the robots.txt file telling search engine spiders "you can spider everything here EXCEPT the /cgi-bin folder". It has nothing to do with site description.
This is what I've used to make certain portions of a site appear under Google searches. http://www.sitemaps.org/protocol.html
^_^

Material Description not Showing in BOMs

Hi ,
Material Description not Showing in BOMs but we maintained the description in Materal Master.

Ltawada,
Then it must be a SAP-Program error. Look for OSS notes for this problem, shall let you know the number If I find.
Regards,
Prasobh

How to search in BI 7.1 query designer for the required key figures & chars

Hi All,
Can anyone plz tell me how to search in BI 7.1 query designer for the required key figures & characteristics. I have the query being built on a multiprovider which has many cubes.
So, i have a huge list of key figures and characteristics. I am not able to search for the required one by the name or the technical name.
How can we search and pick the required object from the enormous list of the Mutliprovider in the Bex Query Designer??
Thanks
Phani

There is not a search feature available. You have to do an educated guess under what dimension your infoobject could be and select.

Vendor Ref No. does not show in Journal Entry for AP Credit

AP Invoice journals show the vendor reference number in field Ref 2. However, when creating an AP Credit memo, the vendor reference number does not show in the journal for the credit memo, instead the field Ref 2 is used for the base document number.
I have two clients who have pointed out that they would expect to see the vendor ref number in the Ref 2 field in the journal when an AP Credit is created, as this is the functionality for Goods Receipts and AP Invoices.
Both clients are currently manually updating the Ref 2 field in the journal for AP Credit, so that in the BP account transactions view they can sort field Ref2 by vendor reference number.
Does anyone have any suggestions on a work around for this?
Thanks,
Lianne Plant

Hi Lianne Plant,
You may check: Journal Ref2 field : AP credit note
Thanks,
Gordon

Planned depreciation not showing in the AW01n for current FY

Hi Experts,
I have an issue on Planned Depreciation and the issue as below.
I have created an Asset with Dep.start date is 10.05.2011 and my Fiscal year is Jan- Dec with 445 posting periods. I have posted Acquisition with the value of 10,000 through F-90. When i check the Asset Explorer through AW01n its not showing Planned deprecation in the Posted Values tab and in Comparisons tab its showing the Dep. from 2012 onwards till useful life and here in 2012 its showing the dep.value from May to Dec only, and also its not showing Dep.value for 2011 year ( showing blank).
If i post the acquistion in 2010, its showing the depreciation from 2011 onwards and also for 2010 year its not showing any planned deprecation.
In Dep. calculation it means % of dep. and every thing is ok. ( its showing the values as per the % stated in dep.key)
I have posted the same scenario to another company code and its showing planned deprecation for 2011 year.
May i know the missed config settings to view planned depreciation.
kindly provide your valuable solution
thanks,
jagadish.P

Hi,
When i click the Dep. calculation its showing as below
Type     To Period         Period Factor     Percentage     Curr.APC
N                 164             0.45055                     0                 0
N                 364             0.54945                 0.125               45,000
thanks & regards,
Gopi.P

HT1727 help how do i make a purchased song my ring tone, it;s not showing on my list for ringtones

help how do i make a purchased song my ring tone, it's not showing on my list for ringtones

This song was purchased from the iTunes Store?
If so, you can't create a ringtone from music that was purchased from the iTunes store, but if there is a ringtone available for purchase and download at the iTunes Store with this song, you need to do that.
For music in your iTunes library on your computer that was not purchased from the iTunes store, there are a number of ways to create a ringtone with such music. With a Mac, there is an inexpensive or free app avaiable via Apple's online App Store named Ringer. Ringer has access to all music and sound files in your iTunes library that was not downloaded from the iTunes Store for creating your chosen segment of the song to be used for the ringtone. The app places the created ringtone in your iTunes library under Tones for transfer to your iPhone when syncing.
Creating ringtones on a Mac can also be done with GarageBand, and there is a manual way of doing this with iTunes.

See & in query Designer for variable

Hi guys,
When i turn the technical name on in the Query designer, sometimes I see & in front and end of a variable. Sometimes, I dont see them. I was wondering why.

I see & in the query designer for the variables. Sometimes, for the same variable I dont see & sign in front and back.
This is what I have observed which in no way is a complete assesment.
When you have multiple variables on Active hierachy char. and you delete one, you see '&' in the other variables.

When I connect my ipod to 2 different Mac computers, it will charge but is not showing up in itunes for sync. What happened?

When I connect my ipod to 2 different Mac computers, it will charge but is not showing up in itunes for sync. What happened?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your Mac? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the Mac?
How to reset iPod
Has this iPod ever worked on this Mac or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in iTunes and Mac desktop
B-rock

Key figure description not show in BEx and WAD sometimes

Hi experts!
I have a big problem. Sometimes we have the effect that a report shows no key figures. I mean I see the numbers but no key figure description is shown.
Example (correct)
Country |    Hierarchy   |        Banking      |         ATM       |      ....
Germany |   Key figure 1 |           1.000     |         500       |      ....
        |   Key figure 2 |                27   |           9       |      ....
        |   Key figure 3 |                27   |           9       |      ....
        |   Key figure 4 |                27   |           9       |      ....
Example (wrong)
Country |    Hierarchy   |        Banking      |         ATM       |      ....
Germany |                |           1.000     |         500       |      ....
        |                |                27   |           9       |      ....
        |                |                27   |           9       |      ....
        |                |                27   |           9       |      ....
We can solve the problem if so we deleted the query from the cache but that is not really a good solution.
Any suggestions?
Regards, Thomas

Hi Thomas,
I have a similar problem in WAD. After applying Patch 19, the Key Figures descriptions do not display in certain reports.
From Query Designer, everything is OK.
Could you fix the issue?
Jean-Luc T.

G/L Description not showing in Query designer for Characteristic values

Similar Messages

Maybe you are looking for