G4 titanium blank screen after startup - gig htz
Screen is very dim but comes on for split second if I restart or if I change monitor settings.
Hi, baziliver. Your PB's inverter board, which provides power to the backlight, may be failing.
Disconnect all peripherals from the computer, make sure the F1 key isn't stuck in the depressed position, and verify that adjusting the brightness upward using the F2 key has no effect on the problem. Restart the computer to see whether the problem still occurs after rebooting. If it does, you'll need to make sure the inverter and video cable connections inside the computer are secure. If disconnecting and firmly reconnecting those doesn't do the trick, replacing the inverter is the next step.
http://www.ifixit.com/Guide/Mac/PowerBook-G4-Ti-DVI/Inverter/33/9/
Similar Messages
-
Bootcamp goes blank screen after startup sign.
I'm unable to start up my bootcamp. It just goes blank screen after the startup moving icon and stays blank screen. Can anyone help? Thank you in advance!!!
@MT1
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP -
After overlaying Air SDK 3.6, iOS projects show a blank screen after startup.
Hi,
I recently overlaid Air 3.6 in Flash Builder 4.7. My projects are using stage3D via Starling. Using the 3.4 SDK that comes installed with FB 4.7, my projects compiled and run fine with both debug and release builds. After overlaying the 3.6 SDK, the projects work fine in the simulator and on Android but when I run the projects on iOS I get a blank screen. I reverted to the 3.4 SDK and my projects work fine on iOS. But, I'd like to be able to have access to the features of 3.6, any and all suggestions would be very much appreciated.
Thank you for you time.
ChrisDid you follow these exact directions?
http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html
(They changed recently and are updated for Flash Builder 4.7)
For step 4, all you have to do is create the blank strip folder - don't need to copy the other files with 4.7 and AIR SDK 3.6. -
Blank Screens After Startup and Wake From Sleep
About half the time I startup my Mac Pro or wake it up from sleep, the screen will go blank, usually about 20-30 seconds after video appears on the screen. The system seems to be running, you just can't see anything.
I have had the screen go completely white, black or blue and occasionally, there will be a solid color with vertical lines throughout the screen. The only thing that will get display back is a forced restart of the entire computer.
I've zapped PRAM and run run hardware test with no issues reported but the problem keeps coming back.
I'm driving a Dell 2407 on my ATI 1900XT. Dell supplied a single-link DVI cable, could that cause issues with a dual-link port on the video card?
Mac Pro Mac OS X (10.4.9) ATI 1900XT, 2GB RAMIntel Macs, especially MacBook Pros seem to be notorious for sleep issues...either not sleeping when supposed to, or not waking up from sleep properly.
My MacBook Pro has come out of the brief case hot as heck with a dead battery often enough, even with all the updates appled. If you listen to the MacBreak Weekly podcast, that's a common complaint of Merlin Mann, who can't figure it out with his machine, and he's no dummy when it comes to Macs. Not very encouraging, is it?
Still, what I would try is reinstalling the OS X 10.4.9 update. I've often read/heard on podcasts that it's better to manually install the larger Combo version of the updates. That seems to have fixed problems for me in the past.
Get the Intel 10.4.9 Combo Update here: http://www.apple.com/support/downloads/macosx1049comboupdateintel.html
Good luck. -
Blank screen after startup. bios corrupted
Hello,
I could really use some help I have a massive project due in a week and cannot access MATLAB anywhere but my laptop. Today windows decided to do its own thing like always and update itself which never seems to work right. But when restarting HP's terrible software also decided to attempt to update my bios. Like usual it failed and proceeded to corrupt my bios for the second time. Unfortunately this time I am out of warranty so they will no longer assist me even though this has been a recurring problem. Could anyone help me figure out how to get this working again? I have been searching Google, but nothing has worked for me I have an ho envy 15" which I believe model jt-1500. I really don't have anymore time to spend on scouring the internet with work and school and really need my laptop to just work again. I can also tell you I'll never buy an HP laptop again unless they can get their software figured out because I am afraid to ever update anything on my computer now.
Thanks for the help in advanceHi,
As I dont have the computer infront of my I am limited in things I can do to fix the problem please try the following two things below to see if they fix your problem if they dont your only option will be take your laptop in for repair howerver you dont have to take to HP you can take it anywhere.
First thing I would like you to try is a power drain to do this remove the AC adapter from your pc and remove the battery, once you have done this press and hold the power button for 20 seconds once this is complete reinsert battery and AC adapter and try the computer again.
The next thing you could attempt is updating the bios this hopefully will install successfully this time, to do this press and hold down the windows key and the letter b on the keyboard then power on the computer still holding down the two keys it will attempt to update the bios.
Hope this helps,
James -
I have a 2012 Mac Mini i7 with 10.9.2. This morning when I rebooted, it did not work right and I just saw static on my monitor. I manually turned off the Mac Mini then restarted it. It boots fine now but now I have a long blank screen after the chime and before it asks for my password. I reset my SMC and PRAM a few times but no change. I reselected my Macintosh HD in the Startup disk too. It is like it is timing out looking for something and then after about two minutes it goes to my Macintosh HD for the password. So it boots up fine now except for this new long pause. Before it would go to the password almost immediately after the chime.
Any other thoughts on what I should do? Thanks.
DougIf you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of diagnostic report, such as hang logs — they're very long and not helpful. -
Blank Screen after 703HP3 (Linux)
Hi,
after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
HP703HP3 I got a blank screen after starting the machine.
All logs look got but I can't login in. Only a blank web page. No login. No
picture. Nothing.
Any idea?
Have anybody the same problem?
I went back to my snapshot. So my user can login.
Now I will try it at another server.
AndreasHi Massimo,
the login web page for webaccess for the user...
Andreas
"Massimo Rosen" <[email protected]> schrieb im Newsbeitrag
news:[email protected]..
> Hi,
>
> Andreas Schild wrote:
>>
>> Hi,
>>
>> after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
>> HP703HP3 I got a blank screen after starting the machine.
>
> What do you mean "a blank screen"? A blank screen where?
>
>> All logs look got but I can't login in. Only a blank web page. No login.
>> No
>> picture. Nothing.
>
> I'm sorry, but it's totally unclear what you're talking about. What web
> page?
>
> CU,
> --
> Massimo Rosen
> Novell Product Support Forum Sysop
> No emails please!
> http://www.cfc-it.de -
Hi,
On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
I've got the latest drivers according to the HP driver update utility.
Anyone with the same problem or have a solutions?
Thanks,
Dean.Hi,
On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
I've got the latest drivers according to the HP driver update utility.
Anyone with the same problem or have a solutions?
Thanks,
Dean. -
Laptop only coming up with a blank screen after set-up?
Ok, so. My parents bought me a brand new hp laptop for christmas. On christmas day i went through the whole set-up process and did all the steps it told me to do. When i'd been through all the steps, i got a loading symbol and ever since, all it comes up with is a blank, black screen and a mouse icon that i can move. I'm not 100% sure of the model though (appologies). What do i need to do??
CheersHello @15_,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook is coming up with a blank screen after setting it up. Is the power on the computer on? Is there an error message on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Blank screen after login in SAP CRM 2007
hi,
we are experienceing blank screen after we login to crm2007 web client.
what we have done
- implemented sap note 168941, 612670, 1045941, 1144511
- assign PFCG role to business role
is there any other step we missed?
Thanks.Hi friend,
Please, check if in your pfcg profile you have the objects:
uiu_comp
CRMCONFMOD
with value *
Regards,
Lalas -
SAP BPC 10.0 Web Client Blank Screen after login
Hi ALL,
We are using SAP BPC 10.0 Web Client with Adobe Flash Player 13.0.0.214 with IE 9.0 on Windows 7.0.
We face strange error where on only on certain PC, the BPC web client working.. On other getting Blank/Blank Screen after login (with "movie not loaded" on the adobe flash player).. Both PCs are having the same setting.
Even one of PC which previously working, starting this week suddenly getting the same error.. I have created OSS message and got feedback with also share this problem on this forum.
I have done several actions as mentioned on several SAP notes )1624267, 1664889, 1681147, 1694871, 1752971, 1798336, 1804221, 1806371, 1811218, 1820505, 1918631, 1968584), but still no luck..
If you have the same issue, kindly share..
Thanks and regards,
HeryYes .. Compatibility View also checked.. in several PCs, it is working well. both failed and working PCs have the same setting.
Just found another weird: in one working PC, 2 different windows local-admin users login to the same PC for BPC-web and getting different result (1 Ok ; 1 failed) ..seems it is related with the user profile and login-domain servers (we have multiple login-domain servers with load balancing mechanism).
Thanks and regards,
Hery -
3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please
I took the iPod to the local Apple shop. The guy put the iPod onto a docking station and checked it - answer "connections are OK". I have used the link before but have not gone through all its suggestions (although picked on the most relevant ones). I may have to go back. Thanks again for your suggestions
-
Blank screen after setting back to Factory Default Setup
After setting an HP Pavillion laptop with Windows XP back to the default factory setup, I get nothing but a blank screen after turning the laptop on. The HP screen doesn't appear, there is just a blank screen.
I have also gotten the blank, black screen, after using the Recovery CD's from HP on THREE different computers, please, if anyone knows how to help, HELP. I get nothing, tried hard off, new memory, new hard drives, no battery, battery, new battery, new a/c adapter, etc. Only one is still under warrenty, a HDX-16t, the other two, an HDX 16 and a Pavilion -1135nr
-
PC fails to reboot and shows blank screen after automatic windows updates including SP
Pavilion- a1130n" WINXP ProfessionalC fails to reboot and shows blank screen after automatic install ing windows updates including SP 3
I would love to say that a refresh worked for me however it did not.It takes about 30 Minutes total I was able to trace part of the issue to a Registry Key that was tagging the processor. Because my BIOS manages its own temp gauge and windows is trying to
build on in I had to turn the BIOS one off as well as for some reason I get better funtionality with Visualization off.
I am still dealing with a lag but I was able to get ride of the freeze that made the computer completely useless. -
I have an iMac with a black / blank screen on startup. Been to Apple Genius (Aus, Bondi). They have no idea and wish to replace logic board, screen ,cable - over $1300 cost - ouch. Any ideas ? Thanks
Buy a new iMac, the base 21.5" models are only $1,199.00
Apple iMac Desktop Computer - Buy iMac, the Ultimate All-in-One - Apple Store (U.S.)
Maybe you are looking for
-
I have a question. I got this error while trying to update both InDesign and Photoshop Installation failed. Error Code: U44M1P7 When I looked in troubleshoot it said to uninstall and then reinstall the affected programs. Ok, easy enough. But before I
-
please give the step by step details . SAP Script and SAP Query .
-
HT1338 Why is iPhoto not showing my pictures?
It just shows grey boxes. I already tried checking for software updates and it says there are no new ones
-
Photo print tools for the HP C on a Windows 8.1 machine.
I have used my HP 930c printer in my last computer but now on a 32/64 bit machine with Windows 8.1 the software from the instalation CD will not run on the desktop computer. I want to use this software because it allow changing the hue, contrast etc
-
I Have recently purchased a HD camcorder (panasonic HDC TM900) the first couple of times I used it and connected it to my Imac I was able to transfer footage without any problem using the Log and Transfer however. I have used the camera a little more