G5 Froze & No Longer Able To Start Up - Indicator Light Flashes 3 Times

I was using Logic while my PowerMac G5 DP 1.8 froze completely. I wasn't able to escape the program or do anything else for that matter so I manually powered down and then when I turned my G5 on again the computer would not start up while the indicator light on the front panel flashed 3 times and then paused and then repeated again indefinitely. Over time the fan starts softly and then gets very loud.
I have been reading alot of reports, here and elsewhere, that this has been happening to alot of G5's after about 3 years time (which is approximately the same age as my computer). I also tried a bunch of stuff like the PMU reset, pulling out some of the memory and trying to restart the computer but nothing has worked.
From my web research of other people's experiences, it appears that the logic board or the CPU or both need to be replaced. I have an appointment to take the G5 to my local Apple store but I was wondering what to expect. The G5 is obviously no longer under warranty but are they going to expect me to pay for a new board or CPU? I also read somewhere that in one case the Apple store just fixed the computer with no charge for parts or labor.
Has anybody had this experience recently and know what to expect? I'm really disappointed and frustrated and this couldn't have happened at a worse time for me! Any advice or insight would def be appreciated...

Thanks for your response DP...
I went to my Apple store appointment last night and was informed that 3 blinking lights means either that there is a problem with RAM or that the Logic Board needs to be replaced. They tried to start the machine with their RAM with no success which leaves only the Logic Board as the culprit.
Once again I am extremely disappointed that my computer which is only 4 years old needs a major repair! And I was quoted ~ $800 from the Apple Store to get it fixed!!!
FAO DP: Which UPS do you recommend? And do you think that a UPS would have saved my Logic Board? Is there a connection between the use of a UPS and the longevity of the Logic Board in your experience? What hurts the Logic Board - spikes or surges or is it drop-off's too? And just to check, regarding the symptoms I described above, does it seem like my power supply is still working ok?

Similar Messages

  • Not able to start SOA managed server first time with node manager by WLST

    Hi all,
    I have created a SOA11g domain. Then using WLST utility I have started the Node Manager.
    Then from WLST prompt I have connected to the Node Manager & started the Admin Server successfully.
    But when ever I am starting the SOA manager server using WLST it's throwing the following error in WLST page : -
    Error Starting server soa_server1: weblogic.nodemanager.NMException: Exception while starting server 'soa_server1'
    In server log file I am getting the following error : -
    Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user denied
    weblogic.security.SecurityInitializationException: Authentication for user denied
    I am getting this problem only when I am trying to start the domain for the first time after domain creation using WLST/nodemanager.
    If I start & stop the SOA managed server from EM console & then try to start it aging from WLST/NodeManager then it's work fine.
    Can anyone please tell me what can be the issue?
    Thanks in Advance!!!
    Edited by: 008 on Dec 6, 2012 7:53 PM

    Hi,
    I am getting this problem only when I am trying to start the domain for the first time after domain creation using WLST/nodemanager.
    If I start & stop the SOA managed server from EM console & then try to start it aging from WLST/NodeManager then it's work fine.When you a server for the first time by using console or startManagedWeblogic.cmd, a file boot.properties is created under %DOMAIN_HOME%\servers\soa_server2\data\nodemanager...
    The WLST/Nodemanager approach doesn't create the file so it won't work for the first start... But it will work just fine from the second on...
    I've never tried, but you can try and create the boot.properties manually in your script with the following content... Password should be encrypted after the first successful start...
    username=type-the-username-here
    password=type-the-password-here
    Cheers,
    Vlad

  • Curve wont start and red light flashes

    I was on my way home on the train and running low on batteries, but thought i had enough to quickly browse the applications.
    I'd installed the free Time app earlier that day and checked it out, and it wasnt really to my taste, so I decided to delete the app. It warned me the blackberry would need to restart which was fine, only it turned off and didnt come back on.
    I thought it had just ran out of battery but now after four hours of charging, and plugging it to my PC the blackberry still wont start. My laptop wont even recognise its plugged into anything and every button I press just gets the flashing red light.
    Can anyone help? Is there a manual reset button on the device?

    Hello,
    I had this happen one time to my 8530... and I thought my heart was going to break. I'm an engineer so I have a bad habit of breaking and fixing, as I have learned that it's the best way to become an expert on any given piece of technology...
    Anyway, I was able to fix my Berry by attaching it to my Mac, and letting the computer load the OS on it. Make sure it's plugged in with the desktop manager when you boot the phone your desktop manager should prompt you if you want to reload the OS... 
    Basically that's what the flashing red light means... you corrupted your OS, and now needs a reinstall.
    It takes about an hour to do...
    Hope this helps!
    ~Tom
    ~Tom
    Curve 8530

  • Itunes video playback started  crashing and no longer able to view on apple tv ideas?

    hi
    since yesterday after everything working ok all videos played fine
    Itunes has started crashing on my pc ( windows 7 ) when playing some videos
    I have deleted and re installed itunes no help
    and apple tv no longer able to share videos from itunes
    message about check network, check itunes update etec
    any help for a dummy appreciated

    av cable can be various formats
    and you mean hdmi and the tv you connect to dont support hdcp that could cause it
    otherwise the cable itself could be damaged
    just finished messing around with connecting my iphone4 to a projector and that works just fine

  • No longer able to add bookmarks on Yahoo Toolbar, Error message: "Exc in ev handl: TypeError: this.oRoot.enable is not a function" started when I updated to Firefox 6.0

    Since updating to Firefox 6.0 I am no longer able to add bookmarks on Yahoo Toolbarl. I receive the following Java Error message: "Exc in ev handl: TypeError: this.oRoot.enable is not a function." When I hit the OK button in the error message it opens up "Add a Bookmark" and when I attempt to add the bookmark there I get this error message: "A problem occured while trying to save the bookmark. Please try again later."
    Is this a comparability issue that you are not aware of? Below are the versions of Firefox and Yahoo Toolbar that I currently have installed:
    Firefox: 6.0.02
    Yahoo Toolbar: 2.4.0.20110815110908
    Windows XP, Service Pack 3
    I am having this issue on my laptop and desktop. Since I use both computers the Yahoo toolbar has been great for having my bookmarks available on both computers at the same time but no I don't have that feature. I'm told that Google's toolbar also doesn't work either.
    Do you guys do any testing or Quality Assurance testing before releasing these versions?

    Add-ons are the responsibility of their authors. McAfee does not even put their extension on http://addons.mozilla.org you had to install it from their site.
    Disable "McAfee Site Advisor" extension which was just updated to 3.4.0, which probably took it out of the addons block list.
    * "Ctrl+Shift+A" > find McAfee Site Advisor and use "Disable", and then restart Firefox.
    * Do a Google Search no problem
    * It seems that if you re-enable Site Advisor again, and restart Firefox you are okay. At least you know where to look if you get the error again or Google searches slow down.

  • Updated my mac to mountain lion 10.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install? Can anyone help me?

    updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?

    It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
    Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
    As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
    Here's a thread that helped me with iPhoto:
    https://discussions.apple.com/thread/4794375?start=0&tstart=0

  • I am no longer able to double click on a file and have it open.  Any suggestions on how to resolve this problem?

    I am no longer able to double click on a file and have it open.  Any suggestions on how to resolve this problem?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • No longer able to create a new message window in Apple Mail

    Please help! When I am in Apple Mail, I am no longer able to create a new message window (Command-N), and so cannot send any mail. This just started after the most recent OS update yesterday.

    Have you tried
    1. clicking on the New Message icon?
    2. File menu / New Message?
    I am trying to figure out if your problem is because Mail is not working, or whether it is a problem elsewhere, e.g. the keyboard.

  • LightScribe SuperMulti DVD±R/RW with Double Layer Support is no longer able to read all lightscribe discs(Blank or Containing Data)

    Hi,
    The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
    Notebook PC support
    The number of my computer is : LM610EA#A2N.
    Could anyone please at this splendid forum take some of their precious time
    out to really reply my questions and solve my problems?
    FIRST OF ALL:
    My HP Pavilion Laptop is about 3 years old.
    My
    sister's Dell Inspiron laptop is 3 years old.
    My HP laptop is well-cared, as opposed to my sister's Inspiron Dell laptop, which is always thrown in dust without caring at all. Also, its battery is always inserted even when it is fully charged while the laptop is plugged in to the main power supply. 
    However, my laptop is either used on only battery, or on plugin. Also, it is kept from the dust. But, I really found that the battery of the Dell laptop still lasts about three and half hours, and there is no problem cooling fan is not properly properly.
    I only remember one thing differently done on my laptop battery which is I charged it fully, then I stored it without using it for about four months, then when I reused it, I found it got worse over time. I.e. first time of using it after storing,I found
    it empty, then I charged it again fully, however, then it lasted about 2 hours, then 1 and half hours, next an hour, now it is only lasting about 20 minutes without performance. If there is high performance, then
    the computer shuts down suddenly.
    My problem is follows:::
    First: Whenever I inserted any Containing Data OR  Data CD/DVD-RLightScribe discs, I found that HP optical driver was
    unable to read them. When clicking on the optical disc drive 'double-click' while disc was inserted, then I found that disc opened as this way(NOTE: With a CD/DVD player is grayed out)
    I  was told 'I suspect the culprit might be hardware and lightscribe dive might be
    corrupt. Please sent it to service center to check. In addition, this thread could be as a reference:
    http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/media-in-cddvd-drive-is-not-readable/794fe26a-7e47-45c4-a50b-0af2ed53f75b'
    Since no one replied to me at HP forums, although my HP laptop is one of their products, I had to post my problem here to know if my driver is corrupted and needs to be replaced or not.
    Blank Or Used(containg data) CD/ DVD ±R/RW lightscirbe is unable to be read by optical drive
    When clicking on drive 'duble-click', I found it opens  like a USB FlashDrive or With a CD,DVD player, however,
    : Bare in mind that 'with CD/DVD Player'
    is grayed out)
    Not Blank(containing data) CD/ DVD ±R/RW NON -Lightscirbe disc opens normal:
    Blank CD/ DVD ±R/RW NON-lightscirbe opens normal(Opens like
    a USB FlashDrive or With a CD,DVD)::
    My LightScribe System Software version is:
    I've tried installed the latest version of lightscribe software, then I run
    the diagnostic utility, however, the problem still persists.
    My HP CD/DVD DVDآ±R/RW specs are::
    Optical Drives
    hp CDDVDW TS-L633R
    Media Type DVD Writer
    Name hp
    CDDVDW TS-L633R
    Availability Running/Full Power
    Capabilities Random
    Access, Supports Writing, Supports Removable Media
    Read capabilities CD-R,
    CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
    DL, DVD+R DL
    Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
    DVD+RW, DVD-R DL, DVD+R DL
    Config Manager Error Code Device is working
    properly
    Config Manager User Config FALSE
    Drive E:
    Media Loaded
    FALSE
    SCSI Bus 0
    SCSI Logical Unit 0
    SCSI Port 0
    SCSI Target Id
    1
    Status OK
    Trying to solve the problem,
    I have done these steps in order::
    I tried checking with dignostic ulitiy:
    I have tried Advanced View , this is the file of output data ofdignostic utlity
    LightScribe System Software Settings:
    SOFTWARE\LightScribe\MessageDir C:\Program Files (x86)\Common Files\LightScribe\
    SOFTWARE\LightScribe\LSPrintDialog C:\Program Files (x86)\Common Files\LightScribe\LSPrintDialog.exe
    SOFTWARE\LightScribe\LSPrintingDialog C:\Program Files (x86)\Common Files\LightScribe\LSPrintingDialog.exe
    SOFTWARE\LightScribe\LsPrintLauncher C:\Program Files (x86)\Common Files\LightScribe\LSPrintLauncher.dll
    SOFTWARE\LightScribe\ResourceDir C:\Program Files (x86)\Common Files\LightScribe\res
    SOFTWARE\LightScribe\LSPrintAPI C:\Program Files (x86)\Common Files\LightScribe\LSPrintAPI.dll
    SOFTWARE\LightScribe\Update\UpdateShellCommand http://www.lightscribe.com/go/downloads/windows
    SOFTWARE\LightScribe\Update\PreviousVersion 1.18.20.1
    SOFTWARE\LightScribe\Update\CurrentVersion 1.18.27.10
    SOFTWARE\LightScribe\Update\TrailingVersion
    SYSTEM\CurrentControlSet\Services\LightScribeService\Type 16
    SYSTEM\CurrentControlSet\Services\LightScribeService\Start 2
    SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl 0
    SYSTEM\CurrentControlSet\Services\LightScribeService\
    SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName LightScribeService Direct Disc Labeling Service
    SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName LocalSystem
    SYSTEM\CurrentControlSet\Services\LightScribeService\Description Used by the LightScribe software components to support 3rd party disc labeling applications using the LightScribe COM Application Programming Interface (LSCAPI). This service needs to run for LightScribe direct disc labeling to work.
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported 7
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0 IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count 2
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance 2
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1 SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
    SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\allocatecdroms 0
    SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
    SOFTWARE\INTEL\Intel Application Accelerator Not detected
    Drives and Media:
    Drive 0 : hp CDDVDW TS-L633R 0300 219 (E:), Media Imaging Parameter : 114
    I tried running the below command line to fix potential disk issue 'Chkdsk/r /f'
    I cleaned the drive, discs, and so on.
    I have uninstalled the all third-party data recording software.
    I have uninstalled the Cyber DVD suite, lightscribe system software
    which came pre-installed with my HP pavilion Notebook.
    I have recovered my system from the HP Factory Recovery discs.
    I have tried opening all those LightScibe discs not opening on my HP optical drive, on a Dell optical drive, and all of them were opened well, although Dell optical drive did not have a lightscribe feature at all., nor  third party disc recording software.
    However, the problem is still with opening the discs LIGHT-SCRIBE.
    Thus, my questions are:
    How to determine if the drive is corrupted and needs to be replaced with another one.
    I think there something needed to be done on the BIOS Of my HP laptop[[[A similar problems happened on my Desktop computer's optical drive which is as follows (ALL discs are opened as empty by Optical Drive of My Desktop Computer) ---while
    my optical drive of my desktop was connected to the
    primary slave IDE, and the HDD was connected to the primary master IDE, the optical drive and hard disk are functioning well. However, I remember that while burning an image with Nero essential V: 5, something went wrong, and
    then the Optical Drive of My Desktop Computer (HL-DT-ST DVD-RAM GH22NP20) became NOTrecognised/Installed on
    BIOS, although it was still shown on the device manager as a recognised device. Also, it was listed on my computer, however, when entering a disc(blank or with data) into the drive, I found it was not recognised, and it opened empty(no files
    at it), although it contains data. Thus, I decided to boot to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was still shown as installed on BIOS.  However, the optical drive was not. Th I tried clicking on it on BIOS and then
    clicking on 'enter' to try to let the device be re-recognized. However, that
    made no difference. I had to take part my computer ,and then reconnected the optical drive onto thesecondary slave IDE , and let HDD connected to the same
    primary master IDE. Then, I found that the problem solved and all discs were read normally. Aslo, optical drive became installed on BIOS.
    What is meant with with double Layer Support.
    How much does it cost?
    A man should convert his anger and sadness into strength to continue living in this life.

    Did you try unsinatalling LightScribe application then checking the status ? 
    This is probably related to the faulty hardware or the application ( LightScribe
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.
    Could you please really concentrate with me, and really reply to me to finish this problem pending.
    If you had had a look again at my first post, you would have seen that I said that I have done some things, among of which is: I have uninstalled the Cyber DVD suite, lightscribe system software
    which came pre-installed with my HP pavilion Notebook.
    Yes, you're right the two threads below are concerned about one issue.
    https://social.technet.microsoft.com/Forums/en-US/w7itpromedia/thread/5c1aa5e8-9728-492b-a5c3-387f29ee4b6e/#d6f63628-29a3-4adf-b33f-03b33c138910
    https://social.technet.microsoft.com/Forums/windows/en-US/683997ff-1004-4579-b69d-5e982746c917/lightscribe-supermulti-dvdrrw-with-double-layer-support-is-no-longer-able-to-read-all-lightscribe?forum=w7itpromedia
    However, this thread contains more precise details and screen shots about the problem. I was not able to understand whether all lightscribs were not unable to be read or not. However, I now recognized that, and I recognized that only all LightScribe(empty
    or used) discs are unable to be read. furthermore, that other thread got far too longer to be followed.
    Moreover, I would like you to take some time out to answer my problem about Lighstscribe discs since I am going to purchase 'A battery, Cooling Fan' From the HP agent in Yemen, which is far away from me about 1000 Km. Thus, If my optical disc drive was corrupted
    as well, then I would be requesting the 'optical disc  drive' as well from the HP along with 'Battery, Cooling Fan' .
    A man should convert his anger and sadness into strength to continue living in this life.

  • After I downloaded and installed the latest iTunes upgrade (to 10.5.1), I am no longer able to download free app upgrades for the apps I have on my iPad/iPhone/iMac which i had previously purchased. Itunes tells me I "don't own the major versions".

    After I downloaded and install the latest iTunes software upgrade (to 10.5.1), I am no longer able to download free upgrades to the apps on my iPhone or iPad.
    The App Store just says I "don't own the major versions", which of course is nonsense. It seems as if Apple's iTunes/App Store has deleted my download history. Any suggestions?
    Regards,
    Bruce

    Actually It doesn't. It says he's on a MacBook. I don't know all the different types of Macs. I was having a ton of problems with iChat. I opened DMZ to my computer, knocked down all firewalls etc and left everything exposed, still with bad results. A few weeks ago my power supply went out on my D-Link. I bought a linksys. Since I'd left all firewalls off I figured it couldn't be the router. I power cycled everything n the netork, still no luck. Today I bought a universal Power supply and started up my D-Link Router. Everything worked perfectly. My wifes computer - a laptop running Tiger worked fine with the Linksys and did my machine before the Leopard upgrade. Now that I've got the D-Link online everythings working.
    Message was edited by: graphico
    Message was edited by: graphico

  • Fatal: Communication Failure: The computer is no longer able to communicate

    I was printing some documents and was doing great, all of a sudden the printer stopped and started showing this message;
    +"fatal: Communication Failure: The computer is no longer able to communicate with your printer. Turn the printer off, check your printer connections and check for printer errors, and turn the printer back on."+
    (the printer is a HP Photosmart 7760).
    I've done everything I could think of to fix the problem but nothing (deleted the printer, re-added it, downloaded the new driver from the website, turned off and back on, re-started the computer) but then, I really really screwed things up when I went and deleted the "PrintJobMgr/Contents/MacOS/PrintJobMgr"
    Wow! How smart. Now I'm trying to restore that file. I've looked in the internet to see if it is available, I got it from a friend but it doesn't work..
    Please, can somebody tell me what can I do at this point.
    Oh, I forgot to mention that the printer is connected to my Airport Extreme Router.
    Help!
    Message was edited by: sakko
    Message was edited by: sakko

    It sounds like you need to do a reinstall to get the PrintJobMgr back. I don't think you can use Pacifist (versiontracker.com) to install this separately, but it might be worth a try.
    Reinstalling the PrintJobMgr should get you back to where you started. At this point, I would disconnect all the cables, turn off the printer, let it sit for a bit, then reconnect and power up the printer.
    Hope this helps.

  • WiFi no longer able to even see wireless networks

    At some point (I believe after installing an update) my iPhone is no longer able to find any wireless networks. It will just continue to "spin" on the choose a network screen and never finds any. Trust me when I say the wireless access point is working and isn't the problem. I used to be able to connect to it and haven't changed anything. Plus there are other iPhone and iTouch users in my house that use it without a problem as well.
    Here are the things I've tried:
    1. Switch to airplane mode then switch back
    2. Reset Network Settings in the general\reset menu
    3. Upgrade to the latest and greatest iphone OS
    4. Finally, I did a reset to factory defaults losing all of my apps and settings. THIS WORKED until I did a restore of my backup to get my apps and data back.
    Is there any way to get this working again without losing everything and starting over?

    This is a user to user help forum only.
    Copied from my previous post.
    If no change after resetting network settings on your iPhone and/or after restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup, your iPhone has a hardware problem with the wireless card or with something else. The iPhone includes a one year warranty.
    Apple's solution if no change after what was copied from my previous post is an exchange under warranty since your iPhone has a hardware problem. With a hardware problem the only solution is an exchange under warranty. If there is no Apple store nearby, you can call AppleCare. If you have purchased the AppleCare extended warranty, the exchange will be shipped to your door the next business day after calling. If you haven't purchased the AppleCare extended warranty, if you pay $29 the exchange will be shipped to your door the next business day after calling. You must give AppleCare a credit card in case you don't return your existing iPhone within 10 days after the exchange under warranty is received. You use the same box to return your existing iPhone with the return shipping label located below the shipping label to you. AppleCare includes tape to reseal the box and a small paperclip to remove the SIM card from your existing iPhone. The phone number for the shipping carrier is included in the box. When the box is ready to be picked up to return your existing iPhone to Apple, you call the carrier.

  • JDeveloper 11.1.1.1.0 no longer able to deploy any application.

    JDeveloper 11.1.1.1.0 no longer able to deploy any application.
    None of may applications can depoly today. Something must have happened to Jdeveloper or my environment. (The joy of automatic updates). Not much in the way of diagnostics here.
    Anyone have ANY IDEA where I should look to get things working again?
    Thanks.
    <Aug 14, 2009 2:07:00 PM MDT> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
    <Aug 14, 2009 2:07:00 PM MDT> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
    <Aug 14, 2009 2:07:01 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Aug 14, 2009 2:07:01 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    Aug 14, 2009 2:07:03 PM oracle.mds.internal.lcm.logging.MDSLCMLogger info
    INFO: Application ID : wsm-pm
    Aug 14, 2009 2:07:03 PM oracle.mds.internal.lcm.logging.MDSLCMLogger info
    INFO: "Metadata Services: Metadata archive (MAR) not found."
    <Aug 14, 2009 2:07:05 PM MDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Leslie Bischoff\Application Data\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <Aug 14, 2009 2:07:05 PM MDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Leslie Bischoff\Application Data\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00040. Log messages will continue to be logged in C:\Documents and Settings\Leslie Bischoff\Application Data\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
    <Aug 14, 2009 2:07:05 PM MDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    Aug 14, 2009 2:07:05 PM oracle.wsm.audit.Auditor <init>
    INFO: Created J2EE application auditor for componentType=oracle.security.jps.internal.audit.AuditServiceImpl$Auditor@220a0c
    Aug 14, 2009 2:07:05 PM oracle.adf.share.config.ADFConfigFactory getInstance
    INFO: ADF Config instance implementation in use is : oracle.adf.share.config.MDSConfigFactory
    Aug 14, 2009 2:07:08 PM oracle.adf.share.config.ADFMDSConfig parseADFConfiguration
    INFO: Configuration file:/META-INF/adf-config.xmlcannot not be read by MDS. Reading directly from the classpath
    <Aug 14, 2009 2:07:08 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Aug 14, 2009 2:07:08 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <Aug 14, 2009 2:07:08 PM MDT> <Warning> <Server> <BEA-002611> <Hostname "pds-b09fd1a25c4", maps to multiple IP addresses: 10.10.10.10, 192.168.0.68, 192.168.40.19>
    <Aug 14, 2009 2:07:08 PM MDT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
    <Aug 14, 2009 2:07:08 PM MDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.10.10.10:7101 for protocols iiop, t3, ldap, snmp, http.>
    <Aug 14, 2009 2:07:08 PM MDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.0.68:7101 for protocols iiop, t3, ldap, snmp, http.>
    <Aug 14, 2009 2:07:08 PM MDT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 192.168.40.19:7101 for protocols iiop, t3, ldap, snmp, http.>
    <Aug 14, 2009 2:07:08 PM MDT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
    <Aug 14, 2009 2:07:08 PM MDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Aug 14, 2009 2:07:08 PM MDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    Failed to start DefaultServer.

    Before I go ahead and reinstall Jdeveloper, I looked in the install directory at recently changed files and found.../jdeveloper/jdev/bin/hs_err_pid1024.log which was written this morning when the problem occurred.
    # An unexpected error has been detected by Java Runtime Environment:
    # Internal Error (nmethod.cpp:1720), pid=1024, tid=3892
    # Error: guarantee(cont_offset != 0,"unhandled implicit exception in compiled code")
    # Java VM: Java HotSpot(TM) Client VM (11.0-b16 mixed mode windows-x86)
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    --------------- T H R E A D ---------------
    Current thread (0x33b46400): JavaThread "AWT-EventQueue-0" [_thread_in_Java, id=3892, stack(0x34040000,0x34140000)]
    Stack: [0x34040000,0x34140000]
    [error occurred during error reporting (printing stack bounds), id 0xe0000000]
    --------------- P R O C E S S ---------------
    Java Threads: ( => current thread )
    0x3750f400 JavaThread "CacheCleaner" daemon [_thread_blocked, id=3724, stack(0x3ad10000,0x3ae10000)]
    0x37dd8400 JavaThread "Worker-2" daemon [_thread_blocked, id=2288, stack(0x3ac10000,0x3ad10000)]
    0x374cf400 JavaThread "Worker-1" daemon [_thread_blocked, id=3260, stack(0x3a910000,0x3aa10000)]
    0x35d00800 JavaThread "Worker-0" daemon [_thread_blocked, id=2456, stack(0x3a590000,0x3a690000)]
    0x3742cc00 JavaThread "Log Poller" [_thread_blocked, id=872, stack(0x3aa10000,0x3ab10000)]
    0x37534400 JavaThread "index-query-thread-1" [_thread_blocked, id=2908, stack(0x3a790000,0x3a890000)]
    0x374d5400 JavaThread "index-update-thread-1" [_thread_blocked, id=3524, stack(0x3a690000,0x3a790000)]
    0x3570d800 JavaThread "file-table-thread-1" [_thread_blocked, id=2248, stack(0x3a390000,0x3a490000)]
    0x37379800 JavaThread "pool-2-thread-2" [_thread_blocked, id=3884, stack(0x3a270000,0x3a370000)]
    0x37338800 JavaThread "pool-2-thread-1" [_thread_blocked, id=2564, stack(0x3a170000,0x3a270000)]
    0x3727dc00 JavaThread "pool-3-thread-1" [_thread_blocked, id=708, stack(0x3a070000,0x3a170000)]
    0x3717a000 JavaThread "pool-1-thread-1" [_thread_blocked, id=2516, stack(0x39ed0000,0x39fd0000)]
    0x37079000 JavaThread "status-0" [_thread_blocked, id=2336, stack(0x35e30000,0x35f30000)]
    0x35d86800 JavaThread "BufferDomModel background parse thread" daemon [_thread_blocked, id=2708, stack(0x39bd0000,0x39cd0000)]
    0x35700c00 JavaThread "TextBufferScavenger" [_thread_blocked, id=2868, stack(0x39dd0000,0x39ed0000)]
    0x35bef800 JavaThread "WaitCursor-Timer" [_thread_blocked, id=960, stack(0x39cd0000,0x39dd0000)]
    0x356a4800 JavaThread "Timer queue for AWT thread" daemon [_thread_blocked, id=492, stack(0x39ad0000,0x39bd0000)]
    0x35c05400 JavaThread "toplink-pool-1-thread-1" [_thread_blocked, id=3428, stack(0x393a0000,0x394a0000)]
    0x35c20400 JavaThread "WeakDataReference polling" [_thread_blocked, id=3668, stack(0x392a0000,0x393a0000)]
    0x35457c00 JavaThread "Native Directory Watcher" [_thread_in_native, id=3728, stack(0x38cf0000,0x38df0000)]
    0x35743400 JavaThread "IconOverlayTracker Timer" [_thread_blocked, id=1856, stack(0x391a0000,0x392a0000)]
    0x35729400 JavaThread "IconOverlayTracker Timer" [_thread_blocked, id=2928, stack(0x390a0000,0x391a0000)]
    0x353d4000 JavaThread "Thread-4" daemon [_thread_in_native, id=3592, stack(0x38df0000,0x38ef0000)]
    0x35900c00 JavaThread "TimerQueue" daemon [_thread_blocked, id=1284, stack(0x38af0000,0x38bf0000)]
    0x33a9dc00 JavaThread "TimedCache-Timer" daemon [_thread_blocked, id=3228, stack(0x33f40000,0x34040000)]
    =>0x33b46400 JavaThread "AWT-EventQueue-0" [_thread_in_Java, id=3892, stack(0x34040000,0x34140000)]
    0x33b55400 JavaThread "AWT-Windows" daemon [_thread_in_native, id=3748, stack(0x33e40000,0x33f40000)]
    0x33b54000 JavaThread "AWT-Shutdown" [_thread_blocked, id=2848, stack(0x33d40000,0x33e40000)]
    0x33b50800 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=1880, stack(0x33c40000,0x33d40000)]
    0x33145000 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3576, stack(0x337b0000,0x338b0000)]
    0x3313f800 JavaThread "CompilerThread0" daemon [_thread_blocked, id=968, stack(0x336b0000,0x337b0000)]
    0x3313dc00 JavaThread "Attach Listener" daemon [_thread_blocked, id=1580, stack(0x335b0000,0x336b0000)]
    0x3313c800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=2524, stack(0x334b0000,0x335b0000)]
    0x3312d000 JavaThread "Finalizer" daemon [_thread_blocked, id=3940, stack(0x333b0000,0x334b0000)]
    0x33128400 JavaThread "Reference Handler" daemon [_thread_blocked, id=3880, stack(0x332b0000,0x333b0000)]
    0x008d7400 JavaThread "main" [_thread_blocked, id=3368, stack(0x00030000,0x00130000)]
    Other Threads:
    0x33124c00 VMThread [stack: 0x331b0000,0x332b0000] [id=3116]
    0x33147800 WatcherThread [stack: 0x338b0000,0x339b0000] [id=2484]
    VM state:not at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: None
    Heap
    def new generation total 18304K, used 3568K [0x030b0000, 0x04480000, 0x05810000)
    eden space 16320K, 14% used [0x030b0000, 0x03305b20, 0x040a0000)
    from space 1984K, 59% used [0x04290000, 0x043b6880, 0x04480000)
    to space 1984K, 0% used [0x040a0000, 0x040a0000, 0x04290000)
    tenured generation total 242224K, used 160242K [0x05810000, 0x1449c000, 0x230b0000)
    the space 242224K, 66% used [0x05810000, 0x0f48cbc0, 0x0f48cc00, 0x1449c000)
    compacting perm gen total 139520K, used 139376K [0x230b0000, 0x2b8f0000, 0x330b0000)
    the space 139520K, 99% used [0x230b0000, 0x2b8cc310, 0x2b8cc400, 0x2b8f0000)
    No shared spaces configured.
    Dynamic libraries:
    0x00400000 - 0x0040b000      C:\Oracle\Middleware\jdeveloper\jdeveloper.exe
    0x7c900000 - 0x7c9b2000      C:\WINDOWS\system32\ntdll.dll
    0x7c800000 - 0x7c8f6000      C:\WINDOWS\system32\kernel32.dll
    0x7e410000 - 0x7e4a1000      C:\WINDOWS\system32\USER32.dll
    0x77f10000 - 0x77f59000      C:\WINDOWS\system32\GDI32.dll
    0x76390000 - 0x763ad000      C:\WINDOWS\system32\IMM32.DLL
    0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
    0x77e70000 - 0x77f02000      C:\WINDOWS\system32\RPCRT4.dll
    0x77fe0000 - 0x77ff1000      C:\WINDOWS\system32\Secur32.dll
    0x00840000 - 0x0085a000      C:\Oracle\Middleware\jdeveloper\ide\bin\launcher.dll
    0x7c9c0000 - 0x7d1d7000      C:\WINDOWS\system32\SHELL32.dll
    0x77c10000 - 0x77c68000      C:\WINDOWS\system32\msvcrt.dll
    0x77f60000 - 0x77fd6000      C:\WINDOWS\system32\SHLWAPI.dll
    0x763b0000 - 0x763f9000      C:\WINDOWS\system32\comdlg32.dll
    0x5d090000 - 0x5d12a000      C:\WINDOWS\system32\COMCTL32.dll
    0x773d0000 - 0x774d3000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\comctl32.dll
    0x6e610000 - 0x6e67b000      C:\PROGRAM FILES\NORTON 360\ENGINE\3.0.0.134\ASOEHOOK.DLL
    0x774e0000 - 0x7761d000      C:\WINDOWS\system32\ole32.dll
    0x77120000 - 0x771ab000      C:\WINDOWS\system32\OLEAUT32.dll
    0x7c340000 - 0x7c396000      C:\Oracle\Middleware\jdk160_11\bin\msvcr71.dll
    0x74720000 - 0x7476c000      C:\WINDOWS\system32\MSCTF.dll
    0x6d8b0000 - 0x6db06000      C:\Oracle\Middleware\jdk160_11\jre\bin\client\jvm.dll
    0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
    0x755c0000 - 0x755ee000      C:\WINDOWS\system32\msctfime.ime
    0x6d330000 - 0x6d338000      C:\Oracle\Middleware\jdk160_11\jre\bin\hpi.dll
    0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
    0x6d860000 - 0x6d86c000      C:\Oracle\Middleware\jdk160_11\jre\bin\verify.dll
    0x6d3d0000 - 0x6d3ef000      C:\Oracle\Middleware\jdk160_11\jre\bin\java.dll
    0x6d8a0000 - 0x6d8af000      C:\Oracle\Middleware\jdk160_11\jre\bin\zip.dll
    0x6d6c0000 - 0x6d6d3000      C:\Oracle\Middleware\jdk160_11\jre\bin\net.dll
    0x71ab0000 - 0x71ac7000      C:\WINDOWS\system32\WS2_32.dll
    0x71aa0000 - 0x71aa8000      C:\WINDOWS\system32\WS2HELP.dll
    0x71a50000 - 0x71a8f000      C:\WINDOWS\System32\mswsock.dll
    0x76f20000 - 0x76f47000      C:\WINDOWS\system32\DNSAPI.dll
    0x76fb0000 - 0x76fb8000      C:\WINDOWS\System32\winrnr.dll
    0x76f60000 - 0x76f8c000      C:\WINDOWS\system32\WLDAP32.dll
    0x76fc0000 - 0x76fc6000      C:\WINDOWS\system32\rasadhlp.dll
    0x6d0b0000 - 0x6d1e8000      C:\Oracle\Middleware\jdk160_11\jre\bin\awt.dll
    0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
    0x6d2d0000 - 0x6d324000      C:\Oracle\Middleware\jdk160_11\jre\bin\fontmanager.dll
    0x6d610000 - 0x6d619000      C:\Oracle\Middleware\jdk160_11\jre\bin\management.dll
    0x34160000 - 0x3417b000      C:\Oracle\Middleware\jdeveloper\ide\lib\idenative.dll
    0x6d6e0000 - 0x6d6e9000      C:\Oracle\Middleware\jdk160_11\jre\bin\nio.dll
    0x3d930000 - 0x3da00000      C:\WINDOWS\system32\WININET.dll
    0x36260000 - 0x36269000      C:\WINDOWS\system32\Normaliz.dll
    0x3dfd0000 - 0x3e015000      C:\WINDOWS\system32\iertutil.dll
    0x76ee0000 - 0x76f1c000      C:\WINDOWS\system32\RASAPI32.dll
    0x76e90000 - 0x76ea2000      C:\WINDOWS\system32\rasman.dll
    0x5b860000 - 0x5b8b5000      C:\WINDOWS\system32\NETAPI32.dll
    0x76eb0000 - 0x76edf000      C:\WINDOWS\system32\TAPI32.dll
    0x76e80000 - 0x76e8e000      C:\WINDOWS\system32\rtutils.dll
    0x769c0000 - 0x76a74000      C:\WINDOWS\system32\USERENV.dll
    0x77c70000 - 0x77c94000      C:\WINDOWS\system32\msv1_0.dll
    0x76d60000 - 0x76d79000      C:\WINDOWS\system32\iphlpapi.dll
    0x722b0000 - 0x722b5000      C:\WINDOWS\system32\sensapi.dll
    0x68000000 - 0x68036000      C:\WINDOWS\system32\rsaenh.dll
    0x6d290000 - 0x6d298000      C:\Oracle\Middleware\jdk160_11\jre\bin\dt_shmem.dll
    0x38ef0000 - 0x3908f000      C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\brio08b.dll
    0x6a900000 - 0x6aaf7000      C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\briu08b.dll
    0x77c00000 - 0x77c08000      C:\WINDOWS\system32\VERSION.dll
    0x742e0000 - 0x742f5000      C:\WINDOWS\system32\SPOOLSS.DLL
    0x39090000 - 0x3909f000      C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\BRIL08B.DLL
    0x73b30000 - 0x73b45000      C:\WINDOWS\system32\mscms.dll
    0x6d240000 - 0x6d263000      C:\Oracle\Middleware\jdk160_11\jre\bin\dcpr.dll
    0x6d620000 - 0x6d6b3000      C:\Oracle\Middleware\jdk160_11\jre\bin\mlib_image.dll
    0x662b0000 - 0x66308000      C:\WINDOWS\system32\hnetcfg.dll
    0x71a90000 - 0x71a98000      C:\WINDOWS\System32\wshtcpip.dll
    0x6d500000 - 0x6d524000      C:\Oracle\Middleware\jdk160_11\jre\bin\jpeg.dll
    VM Arguments:
    jvm_args: -Xmx512M -Xms64M -Xverify:none -XX:JavaPriority10_To_OSPriority=10 -XX:JavaPriority9_To_OSPriority=9 -XX:MaxPermSize=256M -Xbootclasspath/p:../lib/lwawt.jar -Dsun.awt.keepWorkingSetOnMinimize=true -XX:+HeapDumpOnOutOfMemoryError -Doracle.jdeveloper.webservice.showAllOwsmPolicyTypes=false -Doracle.jdeveloper.webservice.hidePropertyOverride=false -Dide.startingArg0=C:\Oracle\Middleware\jdeveloper\jdeveloper.exe -Dide.launcherProcessId=1024 -Dide.config_pathname=C:\Oracle\Middleware\jdeveloper\jdev\bin\jdev.conf -Dide.startingcwd=C:\Documents and Settings\Leslie Bischoff\Desktop -Dide.shell.enableFileTypeAssociation=C:\Oracle\Middleware\jdeveloper\jdeveloper.exe -Dide.pref.dir.base=C:\Documents and Settings\Leslie Bischoff\Application Data -Dide.work.dir.base=C:\Documents and Settings\Leslie Bischoff\My Documents
    java_command: <unknown>
    Launcher Type: generic
    Environment Variables:
    PATH=C:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\WiFi\bin\
    USERNAME=Leslie Bischoff
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 13, GenuineIntel
    --------------- S Y S T E M ---------------
    OS: Windows XP Build 2600 Service Pack 3
    CPU:total 2 (2 cores per cpu, 1 threads per core) family 6 model 15 stepping 13, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3
    Memory: 4k page, physical 2097151k(2097151k free), swap 4194303k(3874168k free)
    vm_info: Java HotSpot(TM) Client VM (11.0-b16) for windows-x86 JRE (1.6.0_11-b03), built on Nov 10 2008 02:15:12 by "java_re" with MS VC++ 7.1
    time: Tue Aug 11 20:39:57 2009
    elapsed time: 892 seconds

  • I am no longer able to create chapters in my Apple TV files

    I am no longer able to create chapters in my Apple TV files.  When I first started editing on the Mac (November 2009) I had a brand new iMac and Snow Leopard.  With Snow Leopard came a 'special' version of QuickTime (QT X?) which were told not to update to 'Pro' (QT 7 Pro).  My process was to use FCE with chapter markers to export my home videos to a QuickTime file.  FCE created a beautiful .mov file with embedded visual chapters as I had marked them.  It imported fine into iDVD.  The next step was to 'Save As' within QuickTime and choose to save with the Apple TV profile.  The .mov file would be converted and everything, including Chapters, would go with it.  From Apple TV, I could peruse my home movies and dig deeper via chapters.  Amazing and totally cool.
    About 9 months ago, maybe a year, the chapters were no longer saving with the Apple TV format.  This meant that each hour long home movie could not be accessed via chapters.
    Was this functionality removed from QuickTime X?  Is there any way to get it back?  I am almost a year behind in my editing since I can no longer easily get the chapter markers in.
    Thanks,
    D.

    im glad that somebody is atleast trying. perhaps i need to be more clear.
    i will step by step describe the issue in detail.
    1) i open an email that contains an attachment .dxf or .pdf
    2) i click on the attachment shown in the email and aprompt comes up asking if i want to open or save the attachment.
    3) i select save. (by default it saves to a downloads folder. but i have also chosen to use other folders (when i did that it wouldnt save them)
    4) i highlight the downloads arrow on the right top side of my browser and click it
    5) it pulls down a list of the files that i USED to be able to click and drag onto my destop, or anyplace i chose
    6) used to be when i clicked and held the left mouse button down on top of a file of my choosing it would highlight and as i began to drag, a ghost image would appear of the file i was dragging. showing a (/) symbol next to it showing i couldnt drop the file within the browser and a + simbol showing that i could drop the file when the file was hovering over a place where i could drop the file such as my desktop or other folder. now, when i click and hold on the file.... I DONT get anything. when i drag. nothing follows. while i am "dragging" in the area that is my browser, i get the pointy finger icon. as soon as i enter an area where i could have dropped the file as before, i get my standard cursor arrow.
    its really as if the drag and drop feature just dosent work IN FIREFOX.
    i can drag and drop files all day long everyplace else.

  • I am no longer able to change songs using my headphones

    After updating to iOS 6.0 on my iphone 4S I am no longer able to change songs using the headphone controls and when i double click on the home button it no longer allows me to turn my music on and off without unlocking the screen and going into the music app on the phone.
    Any ideas why this is?  Is it a known bug?

    Start by opening Disk Utility, from Applications > Utilities, then select the internal storage MacIntosh HD, and then Repair Permissions.  You should see some printer libraries noted as having the wrong permissions, that may be part of the problem.
    Be sure you have the latest printer/scanner drivers installed by going to the Canon site and download the latest available.
    You can also try using the Mac OS X built-in scanning software by going to Applications > Image Capture and see if that handles the scanning for you - works great with my Epson scanner.

Maybe you are looking for