G5 or Intel.....
I'm sure a few other people have asked this...but here goes.
In a while I'm looking to retire my trusty Beige G3 PowerMac, and buy a nice new iMac...Question is....Which one should I get? Intel or G5? How long before G5 Apps stop?
CEH,
Why is that anandtech article even relevant? Keep in mind that the comparison you are talking about is comparing a Pentium M to a Pentium M dual core in windows XP, Which is not really not designed to take advantake of multiple processors. Apple's comparison was between a Dual core Pentium M iMac and the previous iMac's G5, which is based on an entirely different processor (the G5). And this is done on OSX, which IS desigend to take advantage of multiple processors. I dont see how you can even use the windows benchmark tests on anadtech as a measure. I bet there would have been a speed up even if apple had only gone from the G5 to the single core Pentium M.
But, in your defense, I admit that Apple's benchmark claims in the past have been a bit exaggerated. I tend to believe though that in the case of the iMac, the switch from the G5 to Pentium M DC may in fact double performance. The video card upgrade alone has me salivating. And my one system is a 1.67 Powerbook G4 and my other is a quad.
Similar Messages
-
I have tried to install Solaris 8 on my Dell machine.
I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
The first screen says this....
SunOS Secondary Boot version 3.00
WARNING: ACPI Tables not in Reclaim Memory
prom_panic: kmem_free block already free
Entering boot debugger:
[130ee5]:
and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
I don't know what the ACPI tables are .. and how i can fix this...
Anyone who knows this... please help..
Thanx a lot..I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.
-
Installation problem on Intel - IV Machine
Hi,
I am having Intel P-IV machine, with 845 motherboard, sdram, seagate hdd and tnt vga. when i am trying to install solaris 8 in my machine after proceding upto booting from disk (or) cdrom i have selected cdrom then, when i say 1. Interactive or 2. Jumpstart, after selecting Interactive Installation my system is rebooting automatically.
Can any one tell me the solution regarding this issue.
Thanks in advance,
Mohammed Abid AliThis case is similar to the case handled by Jurgen Keil on Digest Number 385 except that my case, it has a different error message.
At the prompt "Select type of installation" (or the prompt
"Select (b)oot or (i)nterpreter:", I type the command "b kadb -d". I see a General Protection Fault and some messages which cause the system to reboot. But I can't capture all the errors/messages cuz there's no system dump device configured.
How do I configured the system dump device so I can send you more details?
Thank you. -
MacBook/Intel 945GM + xrandr - TV
Hi,
I'm not able to send output to my TV. Any help would be greatly appreciated...
I'm on a MacBook 2,1 and using a mini-DVI adapter which outputs to S-Video
lspci:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
xrandr (no options)
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 4096 x 4096
VGA1 connected (normal left inverted right x axis y axis)
1024x768 60.0
800x600 60.3 56.2
848x480 60.0
640x480 59.9
LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 286mm x 178mm
1280x800 59.9*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
DVI1 disconnected (normal left inverted right x axis y axis)
TV1 disconnected (normal left inverted right x axis y axis)
I've tried:
xrandr --output LVDS1 --mode 1280x800 --output VGA1 --mode 800x600 --right-of LVDS1
xrandr --output LVDS1 --mode 1280x800 --output VGA1 --mode 1024x800 --right-of LVDS1
and get a screen flicker but just see black with slightly diagonal white lines/dots scrolling down the screen.
The searching I've done pulls up a lot of people trying to output to monitors but not TVs. I'm unfamiliar with if there is anything special about doing this. The OS X side works fine with this setup and it'd be great to not have to reboot whenever I wanted to watch something. Some searches have mentioned setting custom modes and trying to set TV_STANDARD to PAL or NTSC. I've tried this and get:
$ xrandr --output VGA1 --set TV_STANDARD PAL
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 150 (RANDR)
Minor opcode of failed request: 11 (RRQueryOutputProperty)
Serial number of failed request: 31
Current serial number in output stream: 31
Any suggestions would be greatly appreciated.Hi,
I'm not able to send output to my TV. Any help would be greatly appreciated...
I'm on a MacBook 2,1 and using a mini-DVI adapter which outputs to S-Video
lspci:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
xrandr (no options)
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 4096 x 4096
VGA1 connected (normal left inverted right x axis y axis)
1024x768 60.0
800x600 60.3 56.2
848x480 60.0
640x480 59.9
LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 286mm x 178mm
1280x800 59.9*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
DVI1 disconnected (normal left inverted right x axis y axis)
TV1 disconnected (normal left inverted right x axis y axis)
I've tried:
xrandr --output LVDS1 --mode 1280x800 --output VGA1 --mode 800x600 --right-of LVDS1
xrandr --output LVDS1 --mode 1280x800 --output VGA1 --mode 1024x800 --right-of LVDS1
and get a screen flicker but just see black with slightly diagonal white lines/dots scrolling down the screen.
The searching I've done pulls up a lot of people trying to output to monitors but not TVs. I'm unfamiliar with if there is anything special about doing this. The OS X side works fine with this setup and it'd be great to not have to reboot whenever I wanted to watch something. Some searches have mentioned setting custom modes and trying to set TV_STANDARD to PAL or NTSC. I've tried this and get:
$ xrandr --output VGA1 --set TV_STANDARD PAL
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 150 (RANDR)
Minor opcode of failed request: 11 (RRQueryOutputProperty)
Serial number of failed request: 31
Current serial number in output stream: 31
Any suggestions would be greatly appreciated. -
I Have a 2.2 GHz Intel Core i7 macbook pro, I recieved it with OSx 7.2 lion installed, I need to us AHT (apple hardware test) according to the support page that I copy here
Additional Information
Apple Hardware Test is included on the DVDs that are shipped with some Macintosh computers. If the copy on your hard drive becomes unavailable, use the DVDs to run Apple Hardware Test.
For Intel-based Apple computers that shipped with Mac OS X v10.5.4 or earlier, Apple Hardware Test is located on the Mac OS X Install Disc 1 and should be included with your computer.
For Apple computers that shipped with Mac OS X v10.5.5 to 10.6.7, Apple Hardware Test is located on the Applications Install Disc 2 and should be included with your computer.
For some Apple computers that shipped with OS X Lion, if Apple Hardware Test cannot be found on the hard drive, an Internet-based version starts up instead.
This doesn't work as the additional information statement says it should above. Could someone at apple give me an idea of where to get it or what the "REAL" solution is, since it doesn't work on an internet version which was confirmed today at the Genius Bar in the Apple store.
Please help mechrisfrommarion wrote:
Thanks, while it worked on yours it doesn't work on mine, any other ideas?
Are you holding down the "d" key, all by itself, just after the system shuts down for a restart?
And how long did you hold it down?
I held mine down for about 40-50 seconds. Then I lookat at my routers WAN light and it was flickering so I let up on the d key.
If that does not work then maybe there is something wrong with your MBP. Is that the reason you want to run this test, something isn't right with your unit? -
I recently ran monolingual and removed all but the intel-64 bit architectures. Now my iphoto (along with Idvd, garage band, imovie) will not open. Here is the message that I get.
Process: iPhoto [3543]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: ??? (???)
Build Info: iPhotoProject-4750000~1
Code Type: X86 (Native)
Parent Process: launchd [109]
Date/Time: 2011-06-10 21:48:59.821 -0500
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: -4164908 sec
Crashes Since Last Report: 8
Per-App Crashes Since Last Report: 11
Anonymous UUID: 45357CCD-011B-482E-A2EA-CF42096F1321
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: no suitable image found. Did find:
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.53f13
Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.5
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: ST31000528ASQ, 931.51 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x24300000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0x24400000
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0901, 0x26400000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000Please let me know when you find a fix. I did the same thing and have tried every suggestion I can find online. The message I get is...
Process: iPhoto [4991]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: ??? (???)
Build Info: iPhotoProject-6070000~1
Code Type: X86 (Native)
Parent Process: launchd [142]
Date/Time: 2011-06-13 23:39:38.485 +1200
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: -1643976 sec
Crashes Since Last Report: 35
Per-App Crashes Since Last Report: 12
Anonymous UUID: D4811036-EA8D-479D-8D9F-11E2FC8F6D4C
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: no suitable image found. Did find:
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 232.89 GB
Serial ATA Device: MATSHITADVD-R UJ-898, 3.5 GB
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26100000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24600000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06610000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x06500000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0x06300000
I have reinstalled Mac OSX 10.6.3 and done the updates from there.
I have reinstalled ilife 11 from disk and done the updates.
I have deleted all the suggested files and then redone install and updates.
I have tried just reinstalling iphoto and doing updates.
Is there any way to get a replacement - /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
file with the right architecture? -
?intel iris drivers on macbook pro retina 15" 2014
hi all, i need help i'm lost
it's been 3 days trying to install the intel iris graphic card drivers for the iris 5200 that is shipped with nvidia 750m on the macbook pro 15" retina 2014 and i'm not able to install the drivers.
i installed the preview version of win10 and i rolled back to the preview version of 8.1 both 64bit
and there is something weird, because my bootcamp is only able to install a preview windows version, even having a pro version with product key of 8.1, at the end of the installation, windows say that the changes on my computer can't be saved, so no working windows 8.1 pro
as you are aware, bootcamp download the intelLegacyHdGraphics64.exe together with all other drivers like the nvidia one.. but only the iris drivers will be not installed. the error message is always the same: this computer does not meet the minimum requirement for installing the software.
so, i went to intel site and i downloaded all available drivers, the intel SDK for ocl applications... 2014.exe, the "opencl runtime 14.2x64. package.. installed correctly.
what i'm not able to install are all drivers i could find on the site for the iris.
Intel® Download Center
but i'm getting always this message: this computer does not meet the minimum requirement for installing the software.
the nvidia 750 works as expected, and i did try everything to install the iris drivers.
i also tried to uninstal the nvidia drivers also using the device manager, not just simply disabling it.
and after booting again.. the iris is not listed in the device manager, just the microsoft default display. and trying to install the drivers manually failed too, but that was expectable since there is no intel iris menu from which to pick manually the drivers.
if i try to install using the compatibility tool i get the message that the os is not supported
I'm lost lost lost
did someone try to install them? maybe had luck under a win7? or it is a lost war?patroo wrote:
I Want to use luxrender and luxmark on windows too
the benchmark score of the iris 5200 in osx mode is 4880 while the score of the nvidia is 900/1100
that is a huge difference in speed
I am unable to search http://www.luxrender.net/luxmark/ for benchmark data. Is there another way to get to these numbers? If you use the nVidia that is currently exposed to windows, do you run into any issues for Rendering?
Edited: on my acer running win7, i disabled the intel graphic card for the sake of Nvidia 330m from bios, and it works
this should be possible in win 8.1 too? as i know those setting aren't anymore available as bios mode.
is there a way to unhide the iris 5200 and permanently disabling the nvidia 750 in windows?
You may want to start by looking http://forums.macrumors.com/showthread.php?t=1658931.
btw maybe you can answer to this. Running luxmark in yosemite, when i benchmark using cpu, iris, or cpu+ iris the fun becomes noisy as it should, but if i benchmark just the nvidia card the fun doesn't start. and this should be not normal at all.
This seems to be normal behavior from my experience. The integrated GPU (CPU+Iris) produces much more heat than the discrete nVidia. If you do not have a case on your MBP, put your palm on the bottom panel, and run both tests. You can also use something like iStat to look at the temperatures of various components while running tests. -
How do I use a Verizon PC Wireless card with my iMAC Intel Core desktop?
Help! Bought a Kyocera KPC650 Wireless PC Card for Verizon wireless internet. Works fine w/ laptop because it has a slot. How do I configure my iMAC desktop to accept this card? Is there an external USB adapter? Or do I have to get one installed internally? Which adapter works with OX 10.4?
I've seen the Quatech U132 online. Will that work? Its $192!! As is the Sewell adapter too. ($209)
Any ideas? I want to get off SBCYahoo DSL and their router because our DSL line is damaged in our complex and no one is fixing it!
Thanks in advance.
tklines
iMAC Intel Core Duo Mac OS X (10.4.2) All-in-oneWhat protocol is Verizon using that is not compatible with the Airport Extreme built into your iMac? I have used Apple's Airport Extreme with a lot of different wireless routers with zero problems as all conform to either 802.11b or 802.11g standard both of which are supported by the built in Airport Extreme.
-
Some problems with 3D with xorg 1.9.2-1 and xf86-video-intel 2.12.0-3
I have some problems with the upgrade to xorg 1.9.1-1 and xf86-video-intel 2.12.0-3. Glxgears does not run smoothly at all and I got 15-20 fps (instead of the normal 60 because intel should sync with the V refresh rate). Very curiously, these problems disapear if I move the mouse cursor somewhere in the screen. Then glxgears run smooth and I have indeed the expected 60 fps
There are no error messages and glxinfo say that 3D is indeed enabled.
Xorg log file:
[ 358.899] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
[ 358.899] _XSERVTransOpen: transport open failed for inet6/myhost:0
[ 358.899] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
[ 358.900]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 358.900] X Protocol Version 11, Revision 0
[ 358.900] Build Operating System: Linux 2.6.35-ARCH i686
[ 358.900] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010 i686
[ 358.900] Kernel command line: root=/dev/disk/by-uuid/e5c72fc3-4e8b-4f5d-9023-12216af63d84 resume=/dev/disk/by-uuid/96f14b75-fb64-4881-863d-124af7c13e2f ro
[ 358.900] Build Date: 01 November 2010 10:23:07PM
[ 358.900]
[ 358.900] Current version of pixman: 0.18.4
[ 358.900] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 358.900] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 358.900] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 9 10:14:10 2010
[ 358.900] (==) Using config file: "/etc/X11/xorg.conf"
[ 358.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 358.901] (==) ServerLayout "X.org Configured"
[ 358.901] (**) |-->Screen "Screen0" (0)
[ 358.901] (**) | |-->Monitor "Monitor0"
[ 358.901] (**) | |-->Device "Card0"
[ 358.901] (**) |-->Input Device "Mouse0"
[ 358.901] (**) |-->Input Device "touchpad"
[ 358.901] (**) |-->Input Device "Keyboard0"
[ 358.901] (**) Option "DontZap" "off"
[ 358.901] (**) Option "StandbyTime" "5"
[ 358.901] (**) Option "SuspendTime" "5"
[ 358.901] (**) Option "OffTime" "5"
[ 358.901] (**) Option "Xinerama" "on"
[ 358.901] (**) Option "AutoAddDevices" "off"
[ 358.901] (**) Not automatically adding devices
[ 358.901] (==) Automatically enabling devices
[ 358.902] (**) Xinerama: enabled
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/
[ 358.902] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 358.902] (II) Loader magic: 0x81f1f80
[ 358.902] (II) Module ABI versions:
[ 358.902] X.Org ANSI C Emulation: 0.4
[ 358.902] X.Org Video Driver: 8.0
[ 358.902] X.Org XInput driver : 11.0
[ 358.902] X.Org Server Extension : 4.0
[ 358.903] (--) PCI:*(0:0:2:0) 8086:27a2:1584:9916 rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001800/8
[ 358.903] (--) PCI: (0:0:2:1) 8086:27a6:1584:9916 rev 3, Mem @ 0xb0100000/524288
[ 358.904] (II) Open ACPI successful (/var/run/acpid.socket)
[ 358.904] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) LoadModule: "extmod"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 358.904] (II) Module extmod: vendor="X.Org Foundation"
[ 358.904] compiled for 1.9.2, module version = 1.0.0
[ 358.904] Module class: X.Org Server Extension
[ 358.904] ABI class: X.Org Server Extension, version 4.0
[ 358.904] (II) Loading extension MIT-SCREEN-SAVER
[ 358.904] (II) Loading extension XFree86-VidModeExtension
[ 358.904] (II) Loading extension XFree86-DGA
[ 358.904] (II) Loading extension DPMS
[ 358.904] (II) Loading extension XVideo
[ 358.904] (II) Loading extension XVideo-MotionCompensation
[ 358.904] (II) Loading extension X-Resource
[ 358.904] (II) LoadModule: "glx"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 358.905] (II) Module glx: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.0.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (==) AIGLX enabled
[ 358.905] (II) Loading extension GLX
[ 358.905] (II) LoadModule: "record"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 358.905] (II) Module record: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.13.0
[ 358.905] Module class: X.Org Server Extension
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension RECORD
[ 358.905] (II) LoadModule: "dri2"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 358.905] (II) Module dri2: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.2.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension DRI2
[ 358.905] (II) LoadModule: "dbe"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 358.906] (II) Module dbe: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] Module class: X.Org Server Extension
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension DOUBLE-BUFFER
[ 358.906] (II) LoadModule: "dri"
[ 358.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 358.906] (II) Module dri: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension XFree86-DRI
[ 358.906] (II) LoadModule: "synaptics"
[ 358.906] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.906] (II) Module synaptics: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.0, module version = 1.3.0
[ 358.906] Module class: X.Org XInput Driver
[ 358.906] ABI class: X.Org XInput driver, version 11.0
[ 358.906] (II) LoadModule: "intel"
[ 358.906] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 358.907] (II) Module intel: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 2.12.0
[ 358.907] Module class: X.Org Video Driver
[ 358.907] ABI class: X.Org Video Driver, version 8.0
[ 358.907] (II) LoadModule: "mouse"
[ 358.907] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 358.907] (II) Module mouse: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 1.6.0
[ 358.907] Module class: X.Org XInput Driver
[ 358.907] ABI class: X.Org XInput driver, version 11.0
[ 358.907] (II) LoadModule: "synaptics"
[ 358.907] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.907] (II) LoadModule: "kbd"
[ 358.908] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 358.908] (II) Module kbd: vendor="X.Org Foundation"
[ 358.908] compiled for 1.9.0, module version = 1.4.0
[ 358.908] Module class: X.Org XInput Driver
[ 358.908] ABI class: X.Org XInput driver, version 11.0
[ 358.908] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 358.908] (--) using VT number 7
[ 358.908] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 358.908] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: drmOpenMinor returns 10
[ 358.916] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 358.916] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 358.916] (==) intel(0): RGB weight 888
[ 358.916] (==) intel(0): Default visual is TrueColor
[ 358.916] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 358.916] (--) intel(0): Chipset: "945GM"
[ 358.916] (==) intel(0): video overlay key set to 0x101fe
[ 358.953] (II) intel(0): Output VGA1 using monitor section vgamonitor
[ 358.953] (**) intel(0): Option "Disable" "true"
[ 359.059] (II) intel(0): Output LVDS1 using monitor section lvdsmonitor
[ 359.059] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 359.340] (II) intel(0): Output TV1 has no monitor section
[ 359.380] (II) intel(0): EDID for output VGA1
[ 359.486] (II) intel(0): EDID for output LVDS1
[ 359.486] (II) intel(0): Manufacturer: CPT Model: 13a6 Serial#: 0
[ 359.486] (II) intel(0): Year: 2006 Week: 17
[ 359.486] (II) intel(0): EDID Version: 1.3
[ 359.486] (II) intel(0): Digital Display Input
[ 359.486] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 359.486] (II) intel(0): Gamma: 2.20
[ 359.486] (II) intel(0): No DPMS capabilities specified
[ 359.486] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 359.486] (II) intel(0): First detailed timing is preferred mode
[ 359.486] (II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.309 greenY: 0.559
[ 359.486] (II) intel(0): blueX: 0.149 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
[ 359.486] (II) intel(0): Manufacturer's mask: 0
[ 359.486] (II) intel(0): Supported detailed timing:
[ 359.486] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 359.486] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
[ 359.486] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 359.486] (II) intel(0): Unknown vendor-specific block f
[ 359.486] (II) intel(0): FD1631154WB4
[ 359.486] (II) intel(0): /BRZÄêÿ
[ 359.486] (II) intel(0): EDID (in hex):
[ 359.486] (II) intel(0): 00ffffffffffff000e14a61300000000
[ 359.486] (II) intel(0): 11100103802115780a806d99574f8f26
[ 359.486] (II) intel(0): 21505400000001010101010101010101
[ 359.486] (II) intel(0): 010101010101ea1a0080502010301520
[ 359.486] (II) intel(0): 13004bcf100000190000000f00000000
[ 359.486] (II) intel(0): 0000000000206e050f00000000fe0046
[ 359.486] (II) intel(0): 44313633313135345742340a000000fe
[ 359.486] (II) intel(0): 002f42525a81c4eaff01010a2020004f
[ 359.487] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 359.487] (II) intel(0): Printing probed modes for output LVDS1
[ 359.487] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 359.487] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 359.487] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 359.766] (II) intel(0): EDID for output TV1
[ 359.766] (II) intel(0): Output VGA1 disabled by config file
[ 359.766] (II) intel(0): Output LVDS1 connected
[ 359.766] (II) intel(0): Output TV1 disconnected
[ 359.766] (II) intel(0): Using exact sizes for initial modes
[ 359.766] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 359.766] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 359.766] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[ 359.766] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[ 359.766] (==) intel(0): DPI set to (96, 96)
[ 359.767] (II) Loading sub module "fb"
[ 359.767] (II) LoadModule: "fb"
[ 359.767] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 359.767] (II) Module fb: vendor="X.Org Foundation"
[ 359.767] compiled for 1.9.2, module version = 1.0.0
[ 359.767] ABI class: X.Org ANSI C Emulation, version 0.4
[ 359.767] (==) Depth 24 pixmap format is 32 bpp
[ 359.767] (II) intel(0): [DRI2] Setup complete
[ 359.767] (II) intel(0): [DRI2] DRI driver: i915
[ 359.767] (**) intel(0): Tiling enabled
[ 359.767] (**) intel(0): SwapBuffers wait enabled
[ 359.767] (==) intel(0): VideoRam: 262144 KB
[ 359.767] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[ 359.767] (II) UXA(0): Driver registered support for the following operations:
[ 359.767] (II) solid
[ 359.767] (II) copy
[ 359.767] (II) composite (RENDER acceleration)
[ 359.767] (II) put_image
[ 359.767] (II) get_image
[ 359.767] (==) intel(0): Backing store disabled
[ 359.767] (==) intel(0): Silken mouse enabled
[ 359.767] (II) intel(0): Initializing HW Cursor
[ 359.803] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 359.804] (==) intel(0): DPMS enabled
[ 359.805] (==) intel(0): Intel XvMC decoder disabled
[ 359.805] (II) intel(0): Set up textured video
[ 359.805] (II) intel(0): Set up overlay video
[ 359.805] (II) intel(0): direct rendering: DRI2 Enabled
[ 359.805] (--) RandR disabled
[ 359.805] (II) Initializing built-in extension Generic Event Extension
[ 359.805] (II) Initializing built-in extension SHAPE
[ 359.805] (II) Initializing built-in extension MIT-SHM
[ 359.805] (II) Initializing built-in extension XInputExtension
[ 359.805] (II) Initializing built-in extension XTEST
[ 359.805] (II) Initializing built-in extension BIG-REQUESTS
[ 359.805] (II) Initializing built-in extension SYNC
[ 359.805] (II) Initializing built-in extension XKEYBOARD
[ 359.805] (II) Initializing built-in extension XC-MISC
[ 359.805] (II) Initializing built-in extension SECURITY
[ 359.805] (II) Initializing built-in extension XINERAMA
[ 359.805] (II) Initializing built-in extension XFIXES
[ 359.805] (II) Initializing built-in extension RENDER
[ 359.805] (II) Initializing built-in extension RANDR
[ 359.805] (II) Initializing built-in extension COMPOSITE
[ 359.805] (II) Initializing built-in extension DAMAGE
[ 359.821] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 359.821] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 359.821] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 359.821] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 359.821] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 359.821] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 359.821] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 359.822] (II) intel(0): Setting screen physical size to 338 x 211
[ 360.019] (**) Option "Protocol" "auto"
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.019] (**) Mouse0: Device: "/dev/input/mice"
[ 360.019] (**) Mouse0: Protocol: "auto"
[ 360.019] (**) Option "CorePointer"
[ 360.019] (**) Mouse0: always reports core events
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 360.019] (**) Option "ZAxisMapping" "4 5 6 7"
[ 360.019] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 360.019] (**) Mouse0: Buttons: 11
[ 360.019] (**) Option "Sensitivity" "0.7"
[ 360.019] (**) Mouse0: Sensitivity: 0.7
[ 360.019] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
[ 360.019] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 360.019] (**) Mouse0: (accel) acceleration profile 0
[ 360.019] (**) Mouse0: (accel) acceleration factor: 2.000
[ 360.019] (**) Mouse0: (accel) acceleration threshold: 4
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.311] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 360.311] (II) Synaptics touchpad driver version 1.3.0
[ 360.312] (--) touchpad auto-dev sets device to /dev/input/event6
[ 360.312] (**) Option "Device" "/dev/input/event6"
[ 360.312] (--) touchpad: x-axis range 1472 - 5472
[ 360.312] (--) touchpad: y-axis range 1408 - 4448
[ 360.312] (--) touchpad: pressure range 0 - 255
[ 360.312] (--) touchpad: finger width range 0 - 0
[ 360.312] (--) touchpad: buttons: left right double triple
[ 360.312] (--) touchpad: invalid finger width range. defaulting to 0 - 16
[ 360.312] (**) Option "TapButton1" "1"
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "SendCoreEvents"
[ 360.312] (**) touchpad: always reports core events
[ 360.312] (II) XINPUT: Adding extended input device "touchpad" (type: TOUCHPAD)
[ 360.312] (**) touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 360.312] (**) touchpad: MaxSpeed is now 1.75
[ 360.312] (**) touchpad: AccelFactor is now 0.040
[ 360.312] (**) touchpad: (accel) keeping acceleration scheme 1
[ 360.312] (**) touchpad: (accel) acceleration profile 1
[ 360.312] (**) touchpad: (accel) acceleration factor: 2.000
[ 360.312] (**) touchpad: (accel) acceleration threshold: 4
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "CoreKeyboard"
[ 360.312] (**) Keyboard0: always reports core events
[ 360.312] (**) Option "Protocol" "standard"
[ 360.312] (**) Keyboard0: Protocol: standard
[ 360.312] (**) Option "XkbRules" "base"
[ 360.312] (**) Keyboard0: XkbRules: "base"
[ 360.312] (**) Option "XkbModel" "pc105"
[ 360.312] (**) Keyboard0: XkbModel: "pc105"
[ 360.312] (**) Option "XkbLayout" "fr"
[ 360.313] (**) Keyboard0: XkbLayout: "fr"
[ 360.313] (**) Option "XkbVariant" "oss"
[ 360.313] (**) Keyboard0: XkbVariant: "oss"
[ 360.313] (**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
[ 360.313] (**) Keyboard0: XkbOptions: "terminate:ctrl_alt_bksp"
[ 360.313] (**) Option "CustomKeycodes" "off"
[ 360.313] (**) Keyboard0: CustomKeycodes disabled
[ 360.313] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 360.372] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 360.372] (II) AutoAddDevices is off - not adding device.
[ 360.373] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 360.373] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.377] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 360.377] (II) AutoAddDevices is off - not adding device.
[ 360.379] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/event9)
[ 360.379] (II) AutoAddDevices is off - not adding device.
[ 360.380] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/mouse1)
[ 360.380] (II) AutoAddDevices is off - not adding device.
[ 360.382] (II) config/udev: Adding input device Western Digital External HDD (/dev/input/event8)
[ 360.382] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 362.484] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 368.334] (II) Open ACPI successful (/var/run/acpid.socket)
[ 368.334] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 368.503] (II) intel(0): EDID vendor "CPT", prod id 5030
[ 368.503] (II) intel(0): Printing DDC gathered Modelines:
[ 368.503] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 369.076] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 369.076] (--) touchpad: touchpad found
[ 441.972] (II) 3rd Button detected: disabling emulate3Button
output of glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_INTEL_swap_event
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
GLX version: 1.4
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GM GEM 20100328 2010Q1 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.8.3
OpenGL extensions:
GL_ARB_copy_buffer, GL_ARB_depth_texture, GL_ARB_draw_buffers,
GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_program,
GL_ARB_half_float_pixel, GL_ARB_map_buffer_range, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_provoking_vertex, GL_ARB_shader_objects,
GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow,
GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_array_object,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_framebuffer_blit,
GL_EXT_framebuffer_object, GL_EXT_fog_coord,
GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
GL_APPLE_client_storage, GL_APPLE_packed_pixels,
GL_APPLE_vertex_array_object, GL_APPLE_object_purgeable,
GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_packed_depth_stencil, GL_NV_texture_env_combine4,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
32 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8e 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x8f 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x90 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x91 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x92 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x93 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x94 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x95 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x96 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x97 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x98 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x99 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x9a 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x9b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x9c 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9d 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9e 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9f 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa0 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa1 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa2 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa3 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa4 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa5 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa6 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa7 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa8 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0xa9 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xaa 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x5d 32 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
48 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x5e 0 tc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x5f 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x60 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x61 0 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x62 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x63 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x64 0 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x65 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x66 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x67 0 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x68 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x69 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x6a 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6c 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x70 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x71 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x72 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x73 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x74 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x75 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x76 0 dc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x77 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x78 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x79 0 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7a 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7b 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7c 0 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7d 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7e 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7f 0 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x80 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x81 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x82 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x83 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x84 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x85 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x86 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x87 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x88 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x89 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x8a 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x8b 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x8c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 SlowGusar wrote:
*sigh*
Do you have problems with anything that's *not* glxgears?
I have indeed not seen other problems. Presently the only other software that I believe use openGL that I use is googleearth; which run fine. Could it be a problem with glxgears? -
[solved]black screen with xorg 1.6 after resume (intel)
after upgrading to xorg-server 1.6 no matter if i use s2ram or s2disk, first resume works fine, the second suspend and resume results in a black screen without any chance to swich to any tty.
i have read about bug like this which was resolved with using intel legacy driver. however my problem still occures.
maybe there is some module i should load/unload/reload on hibernate/wake-up?
here is my xorg.conf, lspci, Xorg.0.log.old (the one i had to kill with black screen) and Xorg.0.log
xorg.conf
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "DontZap" "false"
EndSection
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Cursor" "SendCoreEvents"
InputDevice "Stylus" "SendCoreEvents"
InputDevice "Eraser" "SendCoreEvents"
EndSection
Section "InputDevice"
Identifier "Cursor"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"
Option "KeepShape" "on"
Option "Mode" "Absolute"
Option "BottomY" "18432"
Option "BottomX" "24576"
EndSection
Section "InputDevice"
Identifier "Stylus"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"
Option "KeepShape" "on"
Option "TPCButton" "off"
Option "BottomY" "18432"
Option "BottomX" "24576"
Option "Mode" "Absolute"
EndSection
Section "InputDevice"
Identifier "Eraser"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"
Option "KeepShape" "on"
Option "BottomY" "18432"
Option "BottomX" "24576"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "xtrap"
Load "dbe"
Load "dri"
Load "glx"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "base"
Option "XkbModel" "pc105"
Option "XkbLayout" "de, ru"
Option "XkbVariant" "nodeadkeys, winkeys"
Option "XkbOptions" "grp:caps_toggle"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
Option "FramebufferCompression" "on"
Option "AccelMethod" "EXA"
Option "Tiling" "on"
Option "TrippleBuffer" "true"
Option "MigrationHeuristic" "greedy"
Option "RenderAccel" "true"
Option "ExaNoComposite" "false"
Option "EnablePageFlip" "true"
Option "DRI" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "dri"
Mode 0666
EndSection
lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
04:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 13)
04:02.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01)
Xorg.0.log
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 10 April 2009 07:03:14PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:54 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Cursor"
(**) |-->Input Device "Stylus"
(**) |-->Input Device "Eraser"
(**) Option "DontZap" "false"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/local,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-2 $
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "EXA"
(**) intel(0): Option "DRI" "on"
(**) intel(0): Option "FramebufferCompression" "on"
(**) intel(0): Option "Tiling" "on"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xA0080000
(II) intel(0): 2 display pipes available.
(**) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(II) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 363776 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1455100 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xa0080000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
(II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
(II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
(II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(**) intel(0): Option "EXANoComposite" "false"
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
(II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
(II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
(II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(WW) intel(0): Option "TrippleBuffer" is not used
(WW) intel(0): Option "RenderAccel" is not used
(WW) intel(0): Option "EnablePageFlip" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "base"
(**) Keyboard0: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "de, ru"
(**) Keyboard0: XkbLayout: "de, ru"
(**) Option "XkbVariant" "nodeadkeys, winkeys"
(**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
(**) Option "XkbOptions" "grp:caps_toggle"
(**) Keyboard0: XkbOptions: "grp:caps_toggle"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(**) Option "SendCoreEvents"
(**) Cursor: always reports core events
(**) Cursor device is /dev/ttyS0
(**) Cursor is in absolute mode
(**) Cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Cursor: keeps shape
(**) Option "BottomX" "24576"
(**) Cursor: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Cursor: bottom y = 18432
(**) Option "BaudRate" "9600"
(**) Cursor: serial speed 9600
(II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
(**) Option "Device" "/dev/ttyS0"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
usbDetect: can not ioctl version
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Stylus: always reports core events
(**) Stylus device is /dev/ttyS0
(**) Stylus is in absolute mode
(**) Stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Stylus: keeps shape
(**) Option "BottomX" "24576"
(**) Stylus: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Stylus: bottom y = 18432
(**) Stylus: threshold = 15
(**) Stylus: max x set to 24576 by xorg.conf
(**) Stylus: max y set to 18432 by xorg.conf
(**) Stylus: max z = 255
(**) Option "TPCButton" "off"
(**) Option "BaudRate" "9600"
(**) Stylus: serial speed 9600
(II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
(==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Eraser: always reports core events
(**) Eraser device is /dev/ttyS0
(**) Eraser is in absolute mode
(**) Eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Eraser: keeps shape
(**) Option "BottomX" "24576"
(**) Eraser: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Eraser: bottom y = 18432
(**) Eraser: threshold = 15
(**) Eraser: max x set to 24576 by xorg.conf
(**) Eraser: max y set to 18432 by xorg.conf
(**) Eraser: max z = 255
(**) Option "BaudRate" "9600"
(**) Eraser: serial speed 9600
(II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
(==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(II) config/hal: Adding input device ThinkPad Extra Buttons
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Wacom Serial Tablet PC Pen Tablet/Digitizer
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Macintosh mouse button emulation
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Video Bus
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
Xorg.0.log.old
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 10 April 2009 07:03:14PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:40 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Cursor"
(**) |-->Input Device "Stylus"
(**) |-->Input Device "Eraser"
(**) Option "DontZap" "false"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/local,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-2 $
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "EXA"
(**) intel(0): Option "DRI" "on"
(**) intel(0): Option "FramebufferCompression" "on"
(**) intel(0): Option "Tiling" "on"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xA0080000
(II) intel(0): 2 display pipes available.
(**) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(II) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0c00
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 363776 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1455100 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xa0080000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
(II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
(II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
(II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(**) intel(0): Option "EXANoComposite" "false"
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
(II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
(II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
(II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(WW) intel(0): Option "TrippleBuffer" is not used
(WW) intel(0): Option "RenderAccel" is not used
(WW) intel(0): Option "EnablePageFlip" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "base"
(**) Keyboard0: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "de, ru"
(**) Keyboard0: XkbLayout: "de, ru"
(**) Option "XkbVariant" "nodeadkeys, winkeys"
(**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
(**) Option "XkbOptions" "grp:caps_toggle"
(**) Keyboard0: XkbOptions: "grp:caps_toggle"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(**) Option "SendCoreEvents"
(**) Cursor: always reports core events
(**) Cursor device is /dev/ttyS0
(**) Cursor is in absolute mode
(**) Cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Cursor: keeps shape
(**) Option "BottomX" "24576"
(**) Cursor: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Cursor: bottom y = 18432
(**) Option "BaudRate" "9600"
(**) Cursor: serial speed 9600
(II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
(**) Option "Device" "/dev/ttyS0"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
usbDetect: can not ioctl version
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Stylus: always reports core events
(**) Stylus device is /dev/ttyS0
(**) Stylus is in absolute mode
(**) Stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Stylus: keeps shape
(**) Option "BottomX" "24576"
(**) Stylus: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Stylus: bottom y = 18432
(**) Stylus: threshold = 15
(**) Stylus: max x set to 24576 by xorg.conf
(**) Stylus: max y set to 18432 by xorg.conf
(**) Stylus: max z = 255
(**) Option "TPCButton" "off"
(**) Option "BaudRate" "9600"
(**) Stylus: serial speed 9600
(II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
(==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Eraser: always reports core events
(**) Eraser device is /dev/ttyS0
(**) Eraser is in absolute mode
(**) Eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Eraser: keeps shape
(**) Option "BottomX" "24576"
(**) Eraser: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Eraser: bottom y = 18432
(**) Eraser: threshold = 15
(**) Eraser: max x set to 24576 by xorg.conf
(**) Eraser: max y set to 18432 by xorg.conf
(**) Eraser: max z = 255
(**) Option "BaudRate" "9600"
(**) Eraser: serial speed 9600
(II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
(==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(II) UnloadModule: "mouse"
(II) UnloadModule: "kbd"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf8079000 at 0xb78f7000
(II) intel(0): [drm] Closed DRM master.
anyone clue?
Last edited by lynucs (2009-05-09 18:38:01)took a look into everything.log.
that line looks pretty suspicious:
kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
it occures around the time i did the last resume.
here is a relevant snippet from everything.log:
Apr 14 18:35:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 18:35:58 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 18:36:00 thinky acpid: client connected from 9040[0:0]
Apr 14 18:36:00 thinky acpid: 1 client rule loaded
Apr 14 18:38:04 thinky ntpd[6265]: adjusting local clock by -87.862975s
Apr 14 18:42:04 thinky ntpd[6265]: adjusting local clock by -87.769493s
Apr 14 18:42:55 thinky acpid: client 6223[0:0] has disconnected
Apr 14 18:42:55 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
Apr 14 18:42:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 18:43:07 thinky kernel: PM: Syncing filesystems ... done.
Apr 14 18:43:07 thinky kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
Apr 14 18:43:07 thinky kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Apr 14 18:43:07 thinky kernel: Suspending console(s) (use no_console_suspend to debug)
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D3
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Stopping disk
Apr 14 18:43:07 thinky kernel: serial 00:09: disabled
Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PME# disabled
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B disabled
Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# enabled
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D disabled
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: ACPI: Preparing to enter system sleep state S3
Apr 14 18:43:07 thinky kernel: Disabling non-boot CPUs ...
Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
Apr 14 18:43:07 thinky kernel: Intel machine check architecture supported.
Apr 14 18:43:07 thinky kernel: Intel machine check reporting enabled on CPU#0.
Apr 14 18:43:07 thinky kernel: Back to C!
Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
Apr 14 18:43:07 thinky kernel: Force enabled HPET at resume
Apr 14 18:43:07 thinky kernel: ------------[ cut here ]------------
Apr 14 18:43:07 thinky kernel: WARNING: at kernel/hrtimer.c:625 hres_timers_resume+0x41/0x50()
Apr 14 18:43:07 thinky kernel: Hardware name: 1866WBA
Apr 14 18:43:07 thinky kernel: hres_timers_resume() called with IRQs enabled!Modules linked in: ipv6 aes_i586 aes_generic i915 drm i2c_algo_bit ext2 pcmcia psmouse thinkpad_acpi rfkill nvram i2c_i801 serio_raw iTCO_wdt iTCO_vendor_support i2c_core sg yenta_socket rsrc_nonstatic sdhci_pci sdhci pcmcia_core mmc_core video output uhci_hcd ehci_hcd usbcore intel_agp agpgart evdev thermal fan button battery ac fuse snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ath_pci wlan ath_hal(P) arc4 ecb ath5k mac80211 led_class cfg80211 tg3 libphy cpufreq_powersave cpufreq_ondemand cpufreq_conservative acpi_cpufreq freq_table processor rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sd_mod ata_piix ahci ata_generic pata_acpi libata scsi_mod
Apr 14 18:43:07 thinky kernel: Pid: 9512, comm: s2ram Tainted: P 2.6.29-ARCH #1
Apr 14 18:43:07 thinky kernel: Call Trace:
Apr 14 18:43:07 thinky kernel: [<c012f9d7>] warn_slowpath+0x87/0xe0
Apr 14 18:43:07 thinky kernel: [<c011ec25>] default_spin_lock_flags+0x5/0x10
Apr 14 18:43:07 thinky kernel: [<c01164d0>] lapic_next_event+0x10/0x20
Apr 14 18:43:07 thinky kernel: [<c01500e3>] clockevents_program_event+0xa3/0x170
Apr 14 18:43:07 thinky kernel: [<c0151312>] tick_dev_program_event+0x32/0xb0
Apr 14 18:43:07 thinky kernel: [<c0150447>] tick_notify+0x97/0x3c0
Apr 14 18:43:07 thinky kernel: [<c01491a6>] notifier_call_chain+0x36/0x70
Apr 14 18:43:07 thinky kernel: [<c0147ea1>] hres_timers_resume+0x41/0x50
Apr 14 18:43:07 thinky kernel: [<c014cc3a>] timekeeping_resume+0x11a/0x140
Apr 14 18:43:07 thinky kernel: [<c0299d91>] __sysdev_resume+0x11/0x50
Apr 14 18:43:07 thinky kernel: [<c0299e0f>] sysdev_resume+0x3f/0x70
Apr 14 18:43:07 thinky kernel: [<c015b410>] suspend_devices_and_enter+0x160/0x190
Apr 14 18:43:07 thinky kernel: [<c015bb7f>] freeze_processes+0x4f/0xa0
Apr 14 18:43:07 thinky kernel: [<c015b58a>] enter_state+0xfa/0x150
Apr 14 18:43:07 thinky kernel: [<c015b674>] state_store+0x94/0xd0
Apr 14 18:43:07 thinky kernel: [<c015b5e0>] state_store+0x0/0xd0
Apr 14 18:43:07 thinky kernel: [<c0224a74>] kobj_attr_store+0x24/0x30
Apr 14 18:43:07 thinky kernel: [<c01f3351>] sysfs_write_file+0xa1/0x100
Apr 14 18:43:07 thinky kernel: [<c01f32b0>] sysfs_write_file+0x0/0x100
Apr 14 18:43:07 thinky kernel: [<c01a8df0>] vfs_write+0xa0/0x160
Apr 14 18:43:07 thinky kernel: [<c01a8f81>] sys_write+0x41/0x80
Apr 14 18:43:07 thinky kernel: [<c0103ea3>] sysenter_do_call+0x12/0x2f
Apr 14 18:43:07 thinky kernel: ---[ end trace 2b9e3dc85bad025f ]---
Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x68000000)
Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xa0211000)
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: restoring config space at offset 0x3 (was 0x5008, writing 0xa808)
Apr 14 18:43:07 thinky kernel: ACPI: Waking up from system sleep state S3
Apr 14 18:43:07 thinky kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PME# disabled
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: PME# disabled
Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb2: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb3: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb4: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb5: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 14 18:43:07 thinky kernel: pci 0000:00:1e.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# disabled
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Apr 14 18:43:07 thinky kernel: serial 00:09: activated
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Starting disk
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
Apr 14 18:43:07 thinky kernel: ata1: EH complete
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 14 18:43:07 thinky kernel: usb 4-2: reset full speed USB device using uhci_hcd and address 2
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: Restarting tasks ... done.
Apr 14 18:43:07 thinky acpid: client 9040[0:0] has disconnected
Apr 14 18:43:07 thinky logger: ACPI group/action undefined: processor / CPU
Apr 14 18:43:07 thinky acpid: client connected from 9040[0:0]
Apr 14 18:43:07 thinky acpid: 1 client rule loaded
Apr 14 18:43:08 thinky dhcpcd[7651]: wlan0: carrier lost
Apr 14 18:43:08 thinky kernel: wlan0: deauthenticating by local choice (reason=14)
Apr 14 18:43:08 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
Apr 14 18:43:09 thinky kernel: ath5k phy0: noise floor calibration timeout (2452MHz)
Apr 14 18:43:13 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
Apr 14 18:43:13 thinky kernel: wlan0 direct probe responded
Apr 14 18:43:13 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:13 thinky kernel: wlan0: authenticated
Apr 14 18:43:13 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:13 thinky kernel: wlan0: deauthenticated (Reason: 1)
Apr 14 18:43:14 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 2
Apr 14 18:43:14 thinky kernel: wlan0 direct probe responded
Apr 14 18:43:14 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:14 thinky kernel: wlan0: authenticated
Apr 14 18:43:14 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:14 thinky kernel: wlan0: deauthenticated (Reason: 1)
Apr 14 18:43:15 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 3
Apr 14 18:43:15 thinky kernel: wlan0 direct probe responded
Apr 14 18:43:15 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:15 thinky kernel: wlan0: authenticated
Apr 14 18:43:15 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:15 thinky kernel: wlan0: deauthenticated (Reason: 1)
Apr 14 18:43:16 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b timed out
Apr 14 18:43:19 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
Apr 14 18:43:19 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 19:27:27 thinky syslog-ng[5106]: syslog-ng starting up; version='3.0.1'
Apr 14 19:27:27 thinky kernel: Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
Apr 14 19:27:27 thinky kernel: KERNEL supported cpus:
Apr 14 19:27:27 thinky kernel: Intel GenuineIntel -
[SOLVED] intel 855GM, Xorg 1.6.1 and black screen
Just installed Arch on my desktop and have the following problem:
I have generated x.conf.new using X -configure and that resulted in two Device sections for
cards - "0:2:0" and "0:2:1" Bus ID. With this configuration X refused to load with message
"Can not set Bus ID", buy either removing section with "0:2:1" completely or by just removing
"Bus ID" parameter I was able to start X, but it presents only black screen and hangs.
I have seen several issues like mine on this boards but neither has a solution to fix my problem:
1) I tried to switch to xf86-video-intel-legacy - same behavior
2) Tried to use i810 driver instead of intel - "no devices found"
3) Tried to start X without config file (only using hal) - just hangs badly, black screen and non responsive
4) Tried disabling autoconfiguration - black screen
5) Tried disabling DRI - black screen
6) Tried switching to XAA - black screen
7) Tried "ForceEnablePipeA "true" - black screen
8) Tried ignoring one of the monitors using "monitor-VGA", "monitor-LVDS" in device section - black screen
Anything else I can try? Video Adapter is Intel 82852/855GM at 00:02.0
Xorg log file with "ModeDebug" true
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux darkzone-mobile 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 14:25:30 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 9 20:32:36 2009
(++) Using config file: "xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Internal LCD"
(**) | |-->Device "Card0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/134217728, 0xfeb00000/524288, I/O @ 0x0000dc00/8
(--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/134217728, 0xfea80000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.6.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile IntelВ® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "XAA"
(**) intel(0): Option "DRI" "False"
(**) intel(0): Option "ModeDebug" "True"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 855GM
(--) intel(0): Chipset: "852GM/855GM"
(--) intel(0): Linear framebuffer at 0xF0000000
(--) intel(0): IO registers at addr 0xFEB00000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(**) intel(0): Using XAA for acceleration
(II) intel(0): Hardware state on X startup:
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000000
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x00015455
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x80000668
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
(II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x00000000 (1, 1)
(II) intel(0): DSPABASE: 0x00000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
(II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
(II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
(II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
(II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
(II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
(II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x00000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0x2204008e (enabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
(II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section External VGA
(**) intel(0): Option "Ignore" "True"
(II) intel(0): Output LVDS using monitor section Internal LCD
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): found backlight control method /sys/class/backlight/asus-laptop
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): Resizable framebuffer: not available (0 2)
(II) intel(0): EDID for output LVDS
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "832x624" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x600
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 50176 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 200700 kB available
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
(Cannot allocate memory)
(WW) intel(0): Allocation error, framebuffer compression disabled
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
(Cannot allocate memory)
(II) intel(0): Allocating 3072 scanlines for pixmap cache
(II) intel(0): Tiled allocation successful.
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
32 128x128 slots
16 256x256 slots
6 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x007e0000 (pgoffset 2016)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x007e4000 (pgoffset 2020)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x007e5000 (pgoffset 2021)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x007e9000 (pgoffset 2025)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x01000000 (pgoffset 4096)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0011ffff: fake bufmgr (1024 kB)
(II) intel(0): 0x00120000-0x0012ffff: xaa scratch (64 kB)
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x007dffff: Core cursor (4 kB, 0x000000000d6b8000 physical
(II) intel(0): 0x007e0000-0x007e3fff: ARGB cursor (16 kB, 0x000000000b04c000 physical
(II) intel(0): 0x007e4000-0x007e4fff: Core cursor (4 kB, 0x000000000b08d000 physical
(II) intel(0): 0x007e5000-0x007e8fff: ARGB cursor (16 kB, 0x000000000b040000 physical
(II) intel(0): 0x007e9000-0x007e9fff: overlay registers (4 kB, 0x000000000d7fa000 physical
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB)
(II) intel(0): 0x08000000: end of aperture
(WW) intel(0): Chosen PLL clock of 48.0 Mhz more than 2% away from desired 50.4 Mhz
(II) intel(0): Mode for pipe B:
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): chosen: dotclock 48000 vco 1344000 ((m 140, m1 23, m2 13), n 3, (p 28, p1 2, p2 14))
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Mode for pipe A:
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): chosen: dotclock 31500 vco 1008000 ((m 126, m1 20, m2 14), n 4, (p 32, p1 8, p2 4))
(II) intel(0): Hardware state at EnterVT:
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000001
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x0001feff
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x00000008
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0xd9000000 (enabled, pipe B)
(II) intel(0): DSPASTRIDE: 0x00001000 (4096 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x025703ff (1024, 600)
(II) intel(0): DSPABASE: 0x01000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x0004140e (n = 4, m1 = 20, m2 = 14)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x90860000 (enabled, non-dvo, default clock, DAC/serial mode, p1 = 8, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x033f027f (640 active, 832 total)
(II) intel(0): HBLANK_A: 0x033f027f (640 start, 832 end)
(II) intel(0): HSYNC_A: 0x02bf0297 (664 start, 704 end)
(II) intel(0): VTOTAL_A: 0x020701df (480 active, 520 total)
(II) intel(0): VBLANK_A: 0x020701df (480 start, 520 end)
(II) intel(0): VSYNC_A: 0x01ea01e8 (489 start, 491 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x58000000 (disabled, pipe A)
(II) intel(0): DSPBSTRIDE: 0x00001000 (4096 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x01000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x03ff0257 (1024, 600)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x0003170d (n = 3, m1 = 23, m2 = 13)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0xa204008e (disabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): pipe A dot 31500 n 4 m1 20 m2 14 p1 8 p2 4
(II) intel(0): pipe B dot 48000 n 3 m1 23 m2 13 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(WW) intel(0): Hardware claims pipe A is on while software believes it is off
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Disabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 158
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Asus Laptop extra buttons
(**) Asus Laptop extra buttons: always reports core events
(**) Asus Laptop extra buttons: Device: "/dev/input/event5"
(II) Asus Laptop extra buttons: Found 1 mouse buttons
(II) Asus Laptop extra buttons: Found keys
(II) Asus Laptop extra buttons: Configuring as keyboard
(**) Asus Laptop extra buttons: YAxisMapping: buttons 4 and 5
(**) Asus Laptop extra buttons: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) TPPS/2 IBM TrackPoint: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Asus Laptop extra buttons: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) intel(0): Comparing regs from server start up to After LeaveVT
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000000
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x00015455
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x80000668
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
(II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x00000000 (1, 1)
(II) intel(0): DSPABASE: 0x00000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
(II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
(II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
(II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
(II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
(II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
(II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x00000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0x2204008e (enabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
(II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
Latest configuration file which still is not working
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "record"
# Load "dri2"
# Load "dri"
Load "dbe"
EndSection
Section "Monitor"
Identifier "Internal LCD"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "External VGA"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "Ignore" "True"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
Option "DRI" "False" # [<bool>]
Option "AccelMethod" "XAA"
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
Option "monitor-VGA" "External VGA"
Option "monitor-LVDS" "Internal LCD"
Option "ModeDebug" "True"
BoardName "82852/855GM Integrated Graphics Device"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Internal LCD"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card0"
Monitor "External VGA"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Last edited by B0b (2009-05-10 21:07:56)firecat53 wrote:
Try the xf86-intel-video-newest package from AUR.
Scott
Installed 2.7.0 from abs testing.. result is the same.. Unfortunately newest from AUR is not compiling complaining about some
macro stuff
Anything else?
This is log file with 2.7.0 module:
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux darkzone-mobile 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 14:25:30 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 9 23:54:58 2009
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Internal LCD"
(**) | |-->Device "Card0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/134217728, 0xfeb00000/524288, I/O @ 0x0000dc00/8
(--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/134217728, 0xfea80000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.7.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile IntelВ® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "XAA"
(**) intel(0): Option "DRI" "False"
(**) intel(0): Option "ModeDebug" "True"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 855GM
(--) intel(0): Chipset: "852GM/855GM"
(--) intel(0): Linear framebuffer at 0xF0000000
(--) intel(0): IO registers at addr 0xFEB00000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(**) intel(0): Using XAA for acceleration
(II) intel(0): Hardware state on X startup:
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000000
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x00015455
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x80000668
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
(II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x00000000 (1, 1)
(II) intel(0): DSPABASE: 0x00000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
(II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
(II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
(II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
(II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
(II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
(II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x00000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0x2204008e (enabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end)
(II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
(II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section External VGA
(**) intel(0): Option "Ignore" "True"
(II) intel(0): Output LVDS using monitor section Internal LCD
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): found backlight control method /sys/class/backlight/asus-laptop
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): Resizable framebuffer: not available (0 2)
(II) intel(0): EDID for output LVDS
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "832x624" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x600
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 50176 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 200700 kB available
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
(Cannot allocate memory)
(WW) intel(0): Allocation error, framebuffer compression disabled
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
(Cannot allocate memory)
(II) intel(0): Allocating 3072 scanlines for pixmap cache
(II) intel(0): Tiled allocation successful.
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
32 128x128 slots
16 256x256 slots
6 512x512 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(WW) intel(0): drmDropMaster failed: Unknown error 4294967295
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x007e0000 (pgoffset 2016)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x007e4000 (pgoffset 2020)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x007e5000 (pgoffset 2021)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x007e9000 (pgoffset 2025)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x00fe9000 (pgoffset 4073)
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x01000000 (pgoffset 4096)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0002ffff: xaa scratch (64 kB)
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x007dffff: Core cursor (4 kB, 0x000000000b26d000 physical
(II) intel(0): 0x007e0000-0x007e3fff: ARGB cursor (16 kB, 0x000000000e6c4000 physical
(II) intel(0): 0x007e4000-0x007e4fff: Core cursor (4 kB, 0x000000000b157000 physical
(II) intel(0): 0x007e5000-0x007e8fff: ARGB cursor (16 kB, 0x00000000099bc000 physical
(II) intel(0): 0x007e9000-0x00fe8fff: fake bufmgr (8192 kB)
(II) intel(0): 0x00fe9000-0x00fe9fff: overlay registers (4 kB, 0x0000000006c1a000 physical
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
(II) intel(0): 0x08000000: end of aperture
(WW) intel(0): Chosen PLL clock of 48.0 Mhz more than 2% away from desired 50.4 Mhz
(II) intel(0): Mode for pipe B:
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): chosen: dotclock 48000 vco 1344000 ((m 140, m1 23, m2 13), n 3, (p 28, p1 2, p2 14))
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Mode for pipe A:
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): chosen: dotclock 31500 vco 1008000 ((m 126, m1 20, m2 14), n 4, (p 32, p1 8, p2 4))
(II) intel(0): Hardware state at EnterVT:
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000001
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x0001feff
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x00000008
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0xd9000000 (enabled, pipe B)
(II) intel(0): DSPASTRIDE: 0x00001000 (4096 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x025703ff (1024, 600)
(II) intel(0): DSPABASE: 0x01000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x0004140e (n = 4, m1 = 20, m2 = 14)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x90860000 (enabled, non-dvo, default clock, DAC/serial mode, p1 = 8, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x033f027f (640 active, 832 total)
(II) intel(0): HBLANK_A: 0x033f027f (640 start, 832 end)
(II) intel(0): HSYNC_A: 0x02bf0297 (664 start, 704 end)
(II) intel(0): VTOTAL_A: 0x020701df (480 active, 520 total)
(II) intel(0): VBLANK_A: 0x020701df (480 start, 520 end)
(II) intel(0): VSYNC_A: 0x01ea01e8 (489 start, 491 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x58000000 (disabled, pipe A)
(II) intel(0): DSPBSTRIDE: 0x00001000 (4096 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x01000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x03ff0257 (1024, 600)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x0003170d (n = 3, m1 = 23, m2 = 13)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0xa204008e (disabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end)
(II) intel(0): pipe A dot 31500 n 4 m1 20 m2 14 p1 8 p2 4
(II) intel(0): pipe B dot 48000 n 3 m1 23 m2 13 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(WW) intel(0): Hardware claims pipe A is on while software believes it is off
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Disabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 158
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Asus Laptop extra buttons
(**) Asus Laptop extra buttons: always reports core events
(**) Asus Laptop extra buttons: Device: "/dev/input/event5"
(II) Asus Laptop extra buttons: Found 1 mouse buttons
(II) Asus Laptop extra buttons: Found keys
(II) Asus Laptop extra buttons: Configuring as keyboard
(**) Asus Laptop extra buttons: YAxisMapping: buttons 4 and 5
(**) Asus Laptop extra buttons: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) TPPS/2 IBM TrackPoint: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Asus Laptop extra buttons: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) intel(0): Comparing regs from server start up to After LeaveVT
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) intel(0): DumpRegsBegin
(II) intel(0): CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep not present)
(II) intel(0): C0DRB0: 0x00000000 (0x0000)
(II) intel(0): C0DRB1: 0x00000000 (0x0000)
(II) intel(0): C0DRB2: 0x00000000 (0x0000)
(II) intel(0): C0DRB3: 0x00000000 (0x0000)
(II) intel(0): C1DRB0: 0x00000000 (0x0000)
(II) intel(0): C1DRB1: 0x00000000 (0x0000)
(II) intel(0): C1DRB2: 0x00000000 (0x0000)
(II) intel(0): C1DRB3: 0x00000000 (0x0000)
(II) intel(0): C0DRA01: 0x00000000 (0x0000)
(II) intel(0): C0DRA23: 0x00000000 (0x0000)
(II) intel(0): C1DRA01: 0x00000000 (0x0000)
(II) intel(0): C1DRA23: 0x00000000 (0x0000)
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
(II) intel(0): VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1 p1 = 10, p2 = 4)
(II) intel(0): DPLL_TEST: 0x00000000 (, DPLLA input buffer disabled, DPLLB input buffer disabled)
(II) intel(0): CACHE_MODE_0: 0x00000000
(II) intel(0): D_STATE: 0x0000030f
(II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:)
(II) intel(0): RENCLK_GATE_D1: 0x00000000
(II) intel(0): RENCLK_GATE_D2: 0x00000000
(II) intel(0): SDVOB: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOC: 0x00000000 (disabled, pipe A, stall disabled, not detected)
(II) intel(0): SDVOUDI: 0x00000000
(II) intel(0): DSPARB: 0x00015455
(II) intel(0): DSPFW1: 0x00000000
(II) intel(0): DSPFW2: 0x00000000
(II) intel(0): DSPFW3: 0x00000000
(II) intel(0): ADPA: 0x00001c18 (disabled, pipe A, +hsync, +vsync)
(II) intel(0): LVDS: 0xc0000300 (enabled, pipe B, 18 bit, 1 channel)
(II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOB: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOC: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
(II) intel(0): DVOA_SRCDIM: 0x00000000
(II) intel(0): DVOB_SRCDIM: 0x00000000
(II) intel(0): DVOC_SRCDIM: 0x00000000
(II) intel(0): PP_CONTROL: 0x00000001 (power target: on)
(II) intel(0): PP_STATUS: 0xd000000a (on, ready, sequencing on)
(II) intel(0): PP_ON_DELAYS: 0x019007d0
(II) intel(0): PP_OFF_DELAYS: 0x01f407d0
(II) intel(0): PP_DIVISOR: 0x00270f04
(II) intel(0): PFIT_CONTROL: 0x80000668
(II) intel(0): PFIT_PGM_RATIOS: 0x00000000
(II) intel(0): PORT_HOTPLUG_EN: 0x00000000
(II) intel(0): PORT_HOTPLUG_STAT: 0x00000000
(II) intel(0): DSPACNTR: 0x00000000 (disabled, pipe A)
(II) intel(0): DSPASTRIDE: 0x00000000 (0 bytes)
(II) intel(0): DSPAPOS: 0x00000000 (0, 0)
(II) intel(0): DSPASIZE: 0x00000000 (1, 1)
(II) intel(0): DSPABASE: 0x00000000
(II) intel(0): DSPASURF: 0x00000000
(II) intel(0): DSPATILEOFF: 0x00000000
(II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEASRC: 0x027f01df (640, 480)
(II) intel(0): PIPEASTAT: 0x80000207 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
(II) intel(0): FPA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): FPA1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_A: 0x808b0000 (enabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 13, p2 = 4)
(II) intel(0): DPLL_A_MD: 0x00000000
(II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total)
(II) intel(0): HBLANK_A: 0x03170287 (648 start, 792 end)
(II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end)
(II) intel(0): VTOTAL_A: 0x020c01df (480 active, 525 total)
(II) intel(0): VBLANK_A: 0x020401e7 (488 start, 517 end)
(II) intel(0): VSYNC_A: 0x01eb01e9 (490 start, 492 end)
(II) intel(0): BCLRPAT_A: 0x00000000
(II) intel(0): VSYNCSHIFT_A: 0x00000000
(II) intel(0): DSPBCNTR: 0x49000000 (disabled, pipe B)
(II) intel(0): DSPBSTRIDE: 0x00000280 (640 bytes)
(II) intel(0): DSPBPOS: 0x00000000 (0, 0)
(II) intel(0): DSPBSIZE: 0x01df027f (640, 480)
(II) intel(0): DSPBBASE: 0x00000000
(II) intel(0): DSPBSURF: 0x00000000
(II) intel(0): DSPBTILEOFF: 0x00000000
(II) intel(0): PIPEBCONF: 0x80000000 (enabled, single-wide)
(II) intel(0): PIPEBSRC: 0x027f018f (640, 400)
(II) intel(0): PIPEBSTAT: 0x80000202 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS)
(II) intel(0): FPB0: 0x00021406 (n = 2, m1 = 20, m2 = 6)
(II) intel(0): FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
(II) intel(0): DPLL_B: 0x90020000 (enabled, non-dvo, default clock, LVDS mode, p1 = 2, p2 = 14)
(II) intel(0): DPLL_B_MD: 0x00000000
(II) intel(0): HTOTAL_B: 0x053f03ff (1024 active, 1344 total)
(II) intel(0): HBLANK_B: 0x053f03ff (1024 start, 1344 end)
(II) intel(0): HSYNC_B: 0x048c0407 (1032 start, 1165 end)
(II) intel(0): VTOTAL_B: 0x02700257 (600 active, 625 total)
(II) intel(0): VBLANK_B: 0x02700257 (600 start, 625 end)
(II) intel(0): VSYNC_B: 0x0260025a (603 start, 609 end)
(II) intel(0): BCLRPAT_B: 0x00000000
(II) intel(0): VSYNCSHIFT_B: 0x00000000
(II) intel(0): VCLK_DIVISOR_VGA0: 0x00021207
(II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406
(II) intel(0): VCLK_POST_DIV: 0x0000888b
(II) intel(0): VGACNTRL: 0x2204008e (enabled)
(II) intel(0): TV_CTL: 0x00000000
(II) intel(0): TV_DAC: 0x00000000
(II) intel(0): TV_CSC_Y: 0x00000000
(II) intel(0): TV_CSC_Y2: 0x00000000
(II) intel(0): TV_CSC_U: 0x00000000
(II) intel(0): TV_CSC_U2: 0x00000000
(II) intel(0): TV_CSC_V: 0x00000000
(II) intel(0): TV_CSC_V2: 0x00000000
(II) intel(0): TV_CLR_KNOBS: 0x00000000
(II) intel(0): TV_CLR_LEVEL: 0x00000000
(II) intel(0): TV_H_CTL_1: 0x00000000
(II) intel(0): TV_H_CTL_2: 0x00000000
(II) intel(0): TV_H_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_1: 0x00000000
(II) intel(0): TV_V_CTL_2: 0x00000000
(II) intel(0): TV_V_CTL_3: 0x00000000
(II) intel(0): TV_V_CTL_4: 0x00000000
(II) intel(0): TV_V_CTL_5: 0x00000000
(II) intel(0): TV_V_CTL_6: 0x00000000
(II) intel(0): TV_V_CTL_7: 0x00000000
(II) intel(0): TV_SC_CTL_1: 0x00000000
(II) intel(0): TV_SC_CTL_2: 0x00000000
(II) intel(0): TV_SC_CTL_3: 0x00000000
(II) intel(0): TV_WIN_POS: 0x00000000
(II) intel(0): TV_WIN_SIZE: 0x00000000
(II) intel(0): TV_FILTER_CTL_1: 0x00000000
(II) intel(0): TV_FILTER_CTL_2: 0x00000000
(II) intel(0): TV_FILTER_CTL_3: 0x00000000
(II) intel(0): TV_CC_CONTROL: 0x00000000
(II) intel(0): TV_CC_DATA: 0x00000000
(II) intel(0): TV_H_LUMA_0: 0x00000000
(II) intel(0): TV_H_LUMA_59: 0x00000000
(II) intel(0): TV_H_CHROMA_0: 0x00000000
(II) intel(0): TV_H_CHROMA_59: 0x00000000
(II) intel(0): FBC_CFB_BASE: 0x00000000
(II) intel(0): FBC_LL_BASE: 0x00000000
(II) intel(0): FBC_CONTROL: 0x00000000
(II) intel(0): FBC_COMMAND: 0x00000000
(II) intel(0): FBC_STATUS: 0x20000000
(II) intel(0): FBC_CONTROL2: 0x00000000
(II) intel(0): FBC_FENCE_OFF: 0x00000000
(II) intel(0): FBC_MOD_NUM: 0x00000000
(II) intel(0): MI_MODE: 0x00000000
(II) intel(0): MI_ARB_STATE: 0x00000000
(II) intel(0): MI_RDRET_STATE: 0x00000000
(II) intel(0): ECOSKPD: 0x00000307
(II) intel(0): DP_B: 0x00000000
(II) intel(0): DPB_AUX_CH_CTL: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPB_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_C: 0x00000000
(II) intel(0): DPC_AUX_CH_CTL: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPC_AUX_CH_DATA5: 0x00000000
(II) intel(0): DP_D: 0x00000000
(II) intel(0): DPD_AUX_CH_CTL: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA1: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA2: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA3: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA4: 0x00000000
(II) intel(0): DPD_AUX_CH_DATA5: 0x00000000
(II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end)
(II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start)
(II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end)
(II) intel(0): pipe A dot 25153 n 2 m1 18 m2 7 p1 13 p2 4
(II) intel(0): pipe B dot 50571 n 2 m1 20 m2 6 p1 2 p2 14
(II) intel(0): DumpRegsEnd
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): xf86UnbindGARTMemory: unbind key 6
(WW) intel(0): drmDropMaster failed: Unknown error 4294967295 -
Installing Windows 7 (64 bit) in MacPro 2.6Ghz Intel Xeon - Impossible?
There is a list of machines on which Bootcamp apparently does not suport Windows 7 - and lucky me, having purchased my copy of 'ultimate' it looks as if mine is one of them.
http://support.apple.com/kb/HT3986
According to the list "*Mac Pro (Mid 2006, Intel Xeon Dual-core 2.66GHz or 3GHz)* " is not supported - now mine is mid 2007, not 2006, but it isn't clear whatis meant there - but I'm thinking it probably means from mid 2006 until the end of production of the 2.66Ghz Intel Xeon Dual-core model. Correct?
But, has anyone managed to get Windows 7 onto one of these, with or without BootCamp - if so, how?
When I use bootcamp, put the 64 bit disc in the drive, it then gets as far as trying to boot from the DVD, and gives a message:
1
2
*Select CD-ROM Boot Type:_*
at this point the keyboard (as supplied with the Mac Pro, apparently important) does not work, nor does a PC format keyboard, so there is apparently no way to select an option, and I wouldn't know which of 1 or 2 was the correct boot type anyhow. The disk sticks and can only be ejected by pulling it out of the casework and pressing the usually concealed button on the drive.
Any pearls of wisdom gratefully received - or do I need a newer Mac Pro for W7?
Thanks. Stephen.I'm experiencing exactly the same. Found some articles about re-burning the DVD but it hasn't helped.
My suspicion is that the BIOS (or mac equivalent) does not support booting 64bit OS. I remember trying to force OSX Leopard to boot 64bit and it wouldn't work. I can't recall the exact issue, but I suspect its similar.
I am installing Windows 7 Ultimate x64 in a Fusion VM - but not bootcamp - just a regular old VM. So far that is fine. Its not done yet but it is loading.
It may be as simple as a BIOS update - but as far as I know - there are none for my Xeon 3GhZ based system.
oh well. -
Intel Raid Vs Marvel Raid on Big Bang B3 Marshall (Non OS Drives) via win7 setup
I apologise in advance if this seems lazy but has anybody tried setting up RAID 1 mirroring of two non-essential data hard drives within Windows 7 64-bit as opposed to a bios setup?
I only need to mirror a games hard drive so as not to have to do manually backup the hard drive with Acronis software backup every other day or so.
I have a Acronis backup of the game hard drive as I am aware that creating a raid array on both drives will delete all data on both drives but I can restore my games software later.
As it was a non-essential raid array (non-OS drives) on my previous hardware setup for these two identical games drives before upgrading to the MSI big-band Marshall B3 I totally forgot to set up the raid whilst doing a fresh install of Windows 7 on a dual boot with a previously restored/Acronis universal restore of windows 7 which also had this raid array.
If that all makes sense I'm hoping you guys can put me in the right direction as to Intel on Marvel (I seem to remember reading in the past that Marvel Raid drivers had issues) preferences for a setup within Windows 7 64-bit rather than the bios setup which would mean starting from scratch which I'm not prepared to do on a non-essential, non-OS Raid array.
If however I was doing an essential OS drives Raid array then it's a no-brainer to do a BIOS setup with a fresh install.
Any thoughts much appreciated, cheersI don't think you are looking at the right areas.
Quote:
Sonnet Tempo cards are compatible with most external SATA storage. However, external hard drives with USB 2.0/eSATA dual interface based on the Oxford Semiconductor OXU931DS storage controller chip may not be compatible with Mac OS X when connected via SATA. Known issues are kernel panics occurring when the drive is connected, or the drive not being recognized by the operating system.
Western Digital manufactures Desktop edition (WD Caviar, Caviar SE, Caviar SE16, and Raptor X) hard drives and Enterprise (RAID) Edition (WD RE, RE2, and Raptor) hard drives. Each type of hard drive is designed to work specifically in either a desktop computer environment, or connected to a RAID controller (hardware or software-based). If you intend to configure Western Digital drives in a RAID set, Sonnet and WD recommend using only their Enterprise edition hard drives. For more information, see this Western Digital FAQ.
EndQuote
http://www.sonnettech.com/product/temposatae4p.html
Not everyone follows guidelines like they use to. Enterprise and RAID Edition drives - even Green RE4 series - not noise. You want a good drive enclosure with adequate cooling from air flow and fans. These are not silent and any drive noise is just background hum and noise that they are working.
http://macperformanceguide.com/RecommendedESATAEnclosures.html
There are dozens of reviews on drive storage. If noise is over riding then you aren't a candidate for RAID, but you are for SSD and Green, and would find SilentPCReview up your alley.
http://www.silentpcreview.com/ -
I seem to kill HD's every two years...the last two i've installed were WD Caviar Black 1TB 7200rpm 3.5" drives. The speed gains over stock drives have been remarkable. I don't blame the drives for the failures, my machines are up and running 16 hours a day, every day, year round. They die from 'mileage' so to speak...i assume...there's no viral acvtivity or questionable downloads to gunk things up...just lots of work.
I have my third new drive ready to install in my intel based iMac...but i've had a thought...I want to install a SSD in my iMac for the speed gain (and recent price drops)...for standard storage i want to use this new WD Caviar Black 1TB in an external drive bay and connect via firewire 800 for storing everything except the OS and my most commonly used software...am i crazy? will the firewire 800 external drive negate the speed gained with an internal SSD??
I have four iMacs in my office, and one at home. I buy second hand and install new drives and boost memory. I'm going to do this on my 'home' machine...if it works out well i want to upgrade the other three this way...but first i need to know if i'm just dreaming, or will it really make a difference? or even possible??
Thanks!
2.66 intell core2duo
2009 iMac
8gig ram
1 gig hd
OSX ver. 10.8The SSD gives great bootup and Application launch speed. I think it also speeds up the video rendering a bit, I do all that on the SSD and then move the finished project to the external drives. As far as the speed for the external drives they are quick enough for viewing video and the file transfer rate is good. I had initially put the SSD into an external cradle (FW800) and the system was faster than on the internal drive. I only got a 1.5GBs SATA drive, perhaps yours could benefit from the 3GBs. I know the 6GBs would be too fast and costs a lot more, even the MacPros need special hookups to make use of the 6GBs.
-
I can not install Oracle 8i 1.6 Client for NT on an Intel pentium 4 Machine
Hi all,
I've heard the java virtual m installed during the installation of oracle client manager 8i 1.6 on a Intel Pentium IV is bugy till now we could n't bring it to runn. Is there anyone who has the uptodate Patch or work around for that problem?
I will be pleased to read any of the suggestions
Thanks and regards.
GallicanI think you would need to contact Oracle support to get the CD's if they're still available. 8.1.6 is desupported.
What kind of errors do you get whne trying to use Crystal with Oracle 8.1.7.4? Perhaps this is an ODBC issue? -
I have a Mac mini OS X 10.4.11, intel core duo processor (not core 2 duo), with 512 mb and 1.83 GHz processor. I only have version 9.0.3 of iTunes because it hasn't let me go higher, which I believe is because of the operating system. I want to get my purchased music from the Mac mini to a different computer (that has the latest version of iTunes) and also my iPad. The Mac mini does not meet the requirements listed to simply upgrade to snow leopard or lion. As far as I can tell. Forgive me if I am lacking here...this is new to me. What can I do to get the music transferred. I have invested alot of money over the past few years on all this music that I should be able to transfer. Thank you in advance if you can help me.
If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
(61713)
Maybe you are looking for
-
I was originally going to post this problem b/c I believed it was causing corruption in my filesystem; I have since decided that it's in fact botched suspend2-attempts that are causing the corruptions (which ALSO isn't good, of course). Anyway, as th
-
Ok I'm trying to put an image in a full screen JPanel, why isn't it working? package game; import gui.FullScreenDisplay; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.lang.Runnable; import java.lang.Thread; publ
-
When and Why Did Apple Drop The 160GB Classic Ipod
Hi I was going to go and finally buy a 160GB Ipod tomrrow.I see they don't even list it anymore on Apples site and Future-shop doesn't even list it on the site. They only make a 120GB Now When Did they Drop this and why??? Also Do any stores still ha
-
I recorded a tranaction and created a BDC program that calls the session in SM35 to execute it immediately. The problem is that I'm having "no batch input data for screen SAPLKACB 0002" error. I just copy the recording to my program and it seems ok.
-
Ciscoworks LMS 3.2 - CS job browser extremely slow
Hello, I have ciscoworks LMS 3.2 on a solaris server with 8 GB of RAM. Whenever I try to access Job Browser (CS->Server->Admin->Job Browser), the page is just loading forever. All other links like Backup, Log Rotation, Selftest etc load pretty quickl