G530 Extended Batt Part number

I have just bought a Lenovo 3000 G530 laptop and I am trying to find a 9-cell extended life battery for it. I cannot find one listed for that model anywhere on the Lenovo site. Does anyone know the part number or the link where I can buy one?? Help...

I have the same problem, but my case is worst. I am outside US. If you find where to buy it, can you please let me know ??? My original 6 cell battery lasts only 2 hs in super economy mode (???). Hope 9cell is better...
Lenovo 3000 G530 4151H8P (I think this model is only outside US: http://www.pc.ibm.com/br/notebooks/ideapad/g-serie​s/index.shtml )
M.Teresa [email protected] 

Similar Messages

  • Need part number to replace primary internal battery

    Hi, I have been receiving Error Code 601 stating my primary internal battery storage capacity is very low.  I am trying to find the correct replacement part number.  I have been searching the site but am not confident I have the correct part number.  My laptop is critical to my job and I must order a replacement ASAP.  I appreciate the guidance!

    This is a slightly misleading error message as it does in fact refer to your notebooks main battery, not the cmos battery. The reason it is call an internal battery is to distinguish it from the extended batteries that you can purchase with some models that attach to the outside of the laptop. Your battery should have a label with P/N.

  • Software Part Number..

    Hi everyone,
    can you help me generate the part number for this software? i know it should be a software/license, please what is the product/part number?
    The description is given below:
    CENTRAL CALL CONTROL SOFTWARE
    The Central Call Control Software extends enterprise telephony
    features and function to packet telephony network devices, VOIP
    gateways and multimedia applications. It shall have the necessary
    License(s) needed for the operation and maintenance of the software.
    It shall have the following functions (but not limited to)
    - Call Processing; Signalling and Device Control; Dial Plan
    Administration; Phone Feature Administration; Directory Services;
    Programming Interface to External Application; Backup and Restore
    Trools; Cisco Unified Communicatioins Manager 7.0 or later Version
    Thanks
    samson

    You can download the files at:
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66973
    The part numbers are different from yours, but give it a try.
    If that doesn't work. You can use imgburn at http://www.imgburn.com/ to create a CD image on your hard disk, then use
    Virtual Clone Drive http://www.slysoft.com/en/virtual-clonedrive.html to load the image. Your computer will treat as a CD drive and lets you run the software on the virtual drive.

  • What is the correct part number for dvi to vga adapter for macbook pro model A1260

    Can someone tell me the Apple part number for the DVI to VGA adapter that came with a Macbook Pro model A1260? (Early 2008)
    My adapter has reached the end of useful life.
    Thanks!

    You have a MacBook Pro 15" Early 2009 (MacBook Pro 4,1)
    The Mac's port is a Dual-link DVI (VGA, Composite and S-video with adapter)
    The DVI connector  connects to the Dual link-DVI port,thus you need a DVI to VGA adapter.
    http://eshop.macsales.com/item/Micro%20Accessories/DVIVGA/
    You also can search the Apple store online for the part, but it's so basic and simple that paying more for Apple's version is just for looks.

  • How to find part number on Motherboard?

    Hi all - I've got a G4 MDD dual 1g mac that I fear has a bad motherboard. I have done some preliminary research into buying a replacement board, which leads me to my question (2-parter):
    1. Can anyone tell me how to find the part number or identify the motherboard in this computer? (so I don't buy the wrong thing)
    2. Other than eBay, can someone recommend a good source for finding a replacement board?
    Any info would be MUCH appreciated. Thanks in advance!

    G4ce,
    The part number is at the end of PCI card slot 5. It will say "APPLE COMPUTER 820-nnnn 2002" (or 2003).
    820-nnnn is the part number, it'll always be 820 in the first part, but the last 4 digits can be different depending on model and manufacture date. Typical values are 1308, 1440, 1445.
    If you're planning to re-use your existing processors, the new board number should match exactly.
    I say"If" because you may find a complete MDD or one sold without certain parts a lot easier than the exact model number board.

  • R835-P56x motherboard Part number

    Toshiba R835-P56X
    Part number PT324U-008003
    I need a motherboard but there is no part number on original motherboard. would anyone know the part number or know where i can go to find out what it is? Its a I5 systemboard
    Thank you
    Solved!
    Go to Solution.

    Portege R835-P56X (PT324U-008003)
       P000542730 or P000549190
    -Jerry

  • Mid-2010 MacBook Pro 15" 2.8 GHz Logic Board Part Number

    Hi all,
    I have been searching for a few hours trying to find the part number for the logic board one of my MBPs.  I, unfortunately, have the Mid-2010 15" MBP with the bad GPU that results in endless kernel panics.  (I also had the first Pentium chip, the pentium 60 with the floating point error in 1995 too).  I upgraded the MBP to the 2.8 GHz, core i7 (2 core) processor when I ordered it in 2010.
    Anyway, the apple tech guide exploded view does not show the part number for the 2.8 GHz.  It only shows the part numbers for the other 3 configurations - 2.4, 2.53 and 2.66.  I took the cover and discovered my my EEE code is "QAG".
    I have just started trying to figure this issue out (too much time has passed and Apple will charge me to fix).  I want to try and find a replacement logic board and do it myself.   Does anyone have an idea what my part number is for the logic board?  None of the sites I searched have a 2.8 GHz board listed just 2.66.
    An alternative question - In my PC building days, some motherboards were compatible with multiple speeds of main processors.  My computer model number
    MC373LL/A
    is the same as the 2.66GHz model.  Does the 2.66 GHz logic board support the 2.8 core i7 too?  I don't want to screw up and order the wrong part.
    OSX Yosemite is installed.
    Thanks,
    Tony

    http://www.powerbookmedic.com/MacBook-Pro-15-Unibody-28GHz-Core-i7-Logic-Board-p -36842.html

  • Part number for DVI to VGA adapter

    I have a MA206LL/A 1.66 MHz Intel duo Mac Mini. The previous owner did not include the DVI VGA adapter. I am using a DVI VGA adapter from a PC. The colors on the VGA monitor are hazy, washed out, and the letters are fuzzy. I went to the Apple store to buy a DVI VGA adapter and they were not sure of the part. I called the online Apple Store and sales again was unsure and switched me to Support. They also were confused and asked me what I thought the part number might be. I understand that the Mac Mini needs a special adapter due to the DVI connecter size. Does anyone know what the correct part number is or a source for a non-Apple DVI to VGA adapter?

    The Apple Store has the functional equivalent for $19. See here:
    http://docs.info.apple.com/article.html?artnum=300576

  • What's the part number/details for the AC Adapter for a HP G61-456EE Notebook PC?

    I'm based in the UAE and I have a G61-456EE Notebook PC. I need to order a replacement AC Adapter since I've misplaced mine and I can't seem to find the specific model/part number in the HP Parts Store. Can someone please advise me on which particular adapter is required for my PC and the necessary instructions on ordering one?

    here is the part # for your computer, choose from two, only diffrence is 90 watt and 65 watt and both can work for you.
    463958-001 SPS-65W ADPTR,
    463955-001 SPS-90W PFC ADPTR,
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • Satellite P300-1A8 - Part number for AC adapter

    Hi.
    Can anyone tell me the Part Number of the AC adapter I need to buy for my Satellite P300-1A8?
    Model no: PSPCOE-01H008EN 15550/1024/1024/160G54/17W + BT/D52/L/M/W
    The toshiba site doesn't list or recognise the model, CarPhone Warehouse didn't provide me with detailed documents, and the original adapter has been stolen. Failing that, can anyone provide an email address for toshiba (I am unable to phone during their office hours).
    Or failing that, some general advice on a compatible adapter please, as I bought an adapter of the correct basic specification - 19V, 3.95A, (75W), 2.5/5.5mm connector (the PA3715E-1ACE) however it doesn't work. The toshiba site lists one other adapter of the same specs (the PA3468E-1AC3) but I am reluctant to risk buying it without being sure it is the correct one. I would be happy to buy a universal adapter but only a high quality one that will not be an electrical hazard.
    Thanks in advance for any help.
    Clare

    Hi PinkPanther.
    Thanks for the reply and the link. That was the part of the site where I found the AC adapter I thought I needed. I could just go ahead and buy the other one, but these are 70 so I really need it to charge the laptop correctly at that price.
    My main problem is that no site is recognizing my laptop model - not Toshiba or the authorized service provider - so I can't find out the exact charger online. The second problem is that I can't phone when their help line is open between 9-6pm M-F, as these are my exact work hours and I have no mobile phone reception.
    I have messaged Toshiba though their site, but I haven't received a reply, and the advantage of an email address is that I can check that it has been delivered. I will try to search for the asp now.
    And, as you say, the original AC adapter would be much better all round.
    Thanks, Clare

  • Satellite Pro P100: What is the Toshiba part number for a 2GB memory module

    Unable to find any way of emailing this question so I have posted it on the forum. Sure this info should be more readily available without having to ask.
    What is the Toshiba part number for a 2GB memory module for a PSPA4E-00F007. That's for a Satellite Pro P100 T2400
    http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie=yes&PRODUCT_ID=115421
    Crucial Memory gives me this module - is that correct?
    http://www.crucial.com/uk/store/mpartspecs.aspx?mtbpoid=A332E10BA5CA7304
    Found this via Kingstons site - is this also correct?
    http://www.dabs.com/productview.aspx?QuickLinx=4P3V
    Would really appreciate some official clarification here.
    Many Thanks

    It must be PA3513U-1M2G. You must check if this module is compatible with your notebook model. I think so.
    Anyway I recommend you to buy high quality product like Kingston modules.

  • What is the motherboard part number for DV3-2232TX (VZ462PA)?

    My DV3-2232TX is not booting - and only flashing the Scroll and Caps Lock lights 4 times in a cycle.
    From searching, this means the graphics card is broken, but it also seems it's built into the motherboard on this model.
    It's out of warranty so I would rather just try and repair it myself with a replacement part, as I suspect any HP repairer will charge like a wounded bull for the service.
    I can't, however, find the correct part number to order it!

    Hello,
    Part number 614-0305-A
    Hope this helps.

  • Report to find a material by a mfr part number and old material number

    Hi,
    Is there any standard report to find a material by a mfr part number and old material number ?
    For the moment, we are using MM03 to search articles by these selection criterion.
    Thanks,
    Julien Girard

    Hi
    As there is no stsndard report use the SQVI to find out the details, It is very simple , please follwo the below steps.
    Use Txn SQVI, enter the Quick view field say- ZMNFR and click the  create button, Enter the title in the next screen i.e Report name- Say - Manufacturer's Part No. Details, in the same screen you need to enter  MARA  for the data from table/database view, please leave the 1. data source as Table only and the radio button as Basis mode only.  Click the tick mark , you will go to the next screen,
    You will notice Quick viewer Intial screen
    Open the node general material data
    Select the Buttons besides the fields MARA-MATNR for material number, MARA-MFRPN for manufacturers part number, and MARA-BISMT for old material number. You can include any other field if you wish to have in your output. You will notice two check boxes against each field, one is for input screen field and the other is for outputf field. But currently you do not bother about and select both the check boxes or any other field you wish to have as input and output as well. Once selected all the fields afer clicking the check boxes save the total arrangement. and then in the same screen use the execute button or use F8 to find out your report input screen.
    Now enter the Material number for which you wish to know other two details in the report and execute again you will find the report output.
    Please ensure that you are maintaining both the details in material master basic data1 and purchasing  view if you wish to get  out output
    Best regards
    SAM
    Edited by: samuel mendis on Apr 8, 2009 6:52 AM

  • On the connector block CB-68LP, there are few screw terminals. I am trying to find the maker and the part number of this screw terminal. Any help is much appreciate​d.

    I am designing a new product to use in our environment and I am trying to go from the I/O card to the PCB eliminating the connector block. For this purpose, I need to find out the screw terminal part number as well as the makers name. Please help.

    The screw terminals are made by Phoenix:
    The 14 screw terminal row is P/N 18-69-33-4
    The 12 screw terminal row is P/N 18-69-31-8

  • Hp officejet pro 8500A plus parts number

    Hello.
    I need to find the part number of the part, (or assembly of parts that is available). I have a printer cracked this gear and I just need to fix the printer has been switched on again. Thanks for the reply.
    Info: one small part I removed so I could take a picture of a broken right gear.

    Hi @RadSed ,
    Thank you for visiting the HP Support Forums and Welcome. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link to get the support number for your region. They will be happy to assist you immediately.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for