G580 Very slow, and mouse problems, please help

I purchased a brand new G580 approx 2 weeks ago.
It has 4GB of memory compared to my old lenovo which had 2GB. This new one runs at half the speed of my old one and has nothing on it (i.e pictures, music, vids etc)
If i open a programme to do something and then open another, it cannot cope with it and will take forever to do anything on the 2nd programme when it eventually opens.
also the mouse wanders! I dont have to be touching it or doing anything near it, it just wanders across the screen which is getting very annoying.
Please could somebody help me?

Hi kiri_tc,
Welcome to Lenovo Community Forums!
I’m sorry to hear that your G580 Laptop is not performing as expected and the cursor is moving erratic, re-installing the Touchpad driver should resolve this issue and let me know the OS (Operating System) that is installed in the computer and the country where the computer was purchased, also the Type of G580 for providing the steps to resolve performance issue and exact touchpad driver link. Below is the link to locate the model number and Type of the computer which is mentioned on the sticker at the base of the Laptop.
How to find the Serial Number (S/N) and Type of your computer
Hope to hear back soon
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

IOS 7 very slow, i have many problem , exemple download documents , typing doc to go .   Very slow, sometime no response , please help us for this error

IOS 7 very slow, i have many problem , exemple download documents , typing doc to go .   Very slow, sometime no response , please help us for this error,

spacepilot wrote:
i live in the WS10 / 0121 area and have been having similar problems. i have an up to 20mb services, but up to a month ago connected at 4800, then my line went dead for 6 days, and all indis could do was send me new router, which came the day after my line was restored, but had dropped to 2418 and remained so for the past 3 to 4 weeks, then i dropped to 1963 yesterday, and 729 today.
all speeds are far lower on my upto 20mb than they where on my upto 8mb link.
foegot to add, i reported the problem via the report a problem link, which hopefully will be red by someone with a firmer grasp of english that the normal call centre staff
welcome to the forum    why don't you start your own subject and post the adsl stats from your router and also run btspeedtester and post the results and someone may be able to offer assistance
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

Hi there Rlong50,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W.

Iphone 4s and iPhoto problem - please help me!!

Hi there
I have searched the discussion boards for an answer to my problem, but cant find one yet.
I have a brand new imac with Mavericks installed and up to date. My iphoto is the latest one according to the app store and I have ios7.0.3 on my iphone 4s.
I have about 300 photos on the iphone and i connected to the imac with a usb cable and it appeared as though all the photos were imported in the usual way, so i agreed to delete them off the iphone when prompted to do so.
However, the events for the appropriate dates have been created, but they are grey and all claim to have 0 photos in them.
When I look at last import, it says that the last import was the import I did a few days ago and appears to ignore the one I have just done.
Please can anyon help me find where my photos are in a simple way. I am getting very cross and frustrated. I have used macs for 7 years with no problems until this.
I would also add that my iphoto is very slow and regularly stops responding so that I have to force quit.
Help appreciated!
Thanks a lot
Nick

Thanks to LarryHN and Old Toad, my problems are nearly over, I hope.
I did the repair and, thankfully, my missing photos are back.
However, I now have about 100 photos which are on my iPhone 4s camera roll and when I plug the phone in, it says that it has already imported them, but I can't find them in iPhoto!
I can see the pictures on the mac when the phone is plugged in and I look on the iphone, but I cant see where they are.
Do you think that having photostream has complicated matters at all?
Also, why does the photo stream on my phone (and ipad) show more photos than the photostream folder fir Nov 2013 in iphoto? Is there a delay in appearing in iphoto?
Finally, about 3 out of 5 times, iphoto becomes really slow and stops responding, requiring a force quit. Any ideas why this is and how to fix it?
THis is a great forum, thanks to everyone for help so far.
Nick

Macbook Pro VERY SLOW since mavericks! Please Help!

My Macbook pro is a late 2012 model, 2.3GHz Intel Core i7 with 4GB ram
Ever since upgrading to mavericks, it has slowed down immensely! It was never this slow or buggy with Mountain lion
It takes a good 2 minutes to load mail, finder is very buggy - it will take a good minute to load a photo - which was not normal
I also run Adobe CC design software - and it is very very slow
Safari is extremely slow and buggy, and sometimes shows screens as below:
I was going to upgrade to 2x8GB ram which will be 16GB of ram - will this solve the problem?
Should i upgrade to yosemite? will these problems be fixed please?
I have tried asking the Apple Outlet here in Malta but they are of no help at all, don't know where else to ask!

My Macbook pro is a late 2012 model, 2.3GHz Intel Core i7 with 4GB ram
Ever since upgrading to mavericks, it has slowed down immensely! It was never this slow or buggy with Mountain lion
It takes a good 2 minutes to load mail, finder is very buggy - it will take a good minute to load a photo - which was not normal
I also run Adobe CC design software - and it is very very slow
Safari is extremely slow and buggy, and sometimes shows screens as below:
I was going to upgrade to 2x8GB ram which will be 16GB of ram - will this solve the problem?
Should i upgrade to yosemite? will these problems be fixed please?
I have tried asking the Apple Outlet here in Malta but they are of no help at all, don't know where else to ask!

The query is performing very very slow, can any one please help me tue this

SELECT h.ROWID row_id, e.preparer_user_id
FROM arsarc.ars_sv_reconciliation e,
arsarc.ars_sv_reconciliation_accts a,
arsarc.ars_sv_acct_status_history h
WHERE e.rec_id = :b1
AND e.rec_id = a.rec_id
AND e.ledger_id = h.ledger_id
AND a.ccid = h.ccid
AND e.preparer_user_id <> h.preparer_user_id
AND h.fiscal_year + h.fiscal_period >= e.fiscal_year + e.fiscal_period
PLAN_TABLE_OUTPUT
Plan hash value: 2851427911
| Id | Operation                     | Name                           | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT              |                                |    60 | 7740 | 6282 (11)| 00:00:08 |
|* 1 | HASH JOIN                    |                                |    60 | 7740 | 6282 (11)| 00:00:08 |
|* 2 |   INDEX RANGE SCAN            | PK_RECONCILIATION_ACCTS        |   104 | 4160 |     3   (0)| 00:00:01 |
|   3 |   NESTED LOOPS                |                                |   178K|    15M| 6243 (10)| 00:00:08 |
|   4 |    TABLE ACCESS BY INDEX ROWID| ARS_SV_RECONCILIATION          |     1 |    23 |     2   (0)| 00:00:01 |
|* 5 |     INDEX UNIQUE SCAN         | PK_ARS_SV_RECONCILIATION       |     1 |       |     1   (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|* 6 |    TABLE ACCESS BY INDEX ROWID| ARS_SV_ACCT_STATUS_HISTORY     |   178K|    11M| 6241 (10)| 00:00:08 |
|* 7 |     INDEX RANGE SCAN          | ARS_SV_ACCT_STATUS_HISTORY$LPY | 62094 |       | 5243 (11)| 00:00:07 |
Predicate Information (identified by operation id):
   1 - access("A"."CCID"="H"."CCID")
   2 - access("A"."REC_ID"=TO_NUMBER(:B1))
   5 - access("E"."REC_ID"=TO_NUMBER(:B1))
   6 - filter("E"."PREPARER_USER_ID"<>"H"."PREPARER_USER_ID")
PLAN_TABLE_OUTPUT
   7 - access("E"."LEDGER_ID"="H"."LEDGER_ID")
       filter("H"."FISCAL_YEAR"+"H"."FISCAL_PERIOD">="E"."FISCAL_YEAR"+"E"."FISCAL_PERIOD")

Hi,
the plan isn't showing any problem (the cost isn't high) so it's not possible to use it to troublehshoot the query. Please provide more information: 4-digit Oracle version, and depending on the version, either SQL real-time monitor report or dbms_xplan output with rowsource stats (option "iostats last" after running your sql with ALTER SESSION SET STATISTICS_LEVEL = ALL).
Also, when reporting a performance problem it would be wise to avoid expressions like "very, very slow" replacing them with something more useful like "my query is taking 2.5 hours to retrieve 30k rows".
Best regards,
Nikolay

Mac suddenly very slow and other problems

Since a few days ago I've been experiencing the following problems:
+ VERY long startup time (more than four minutes vs. about a minute previously).
+ When starting an application, the system frequently hangs for a few seconds. (While it's hanging, sometimes the process is marked "doesn't react" in Activity Monitor).
+ Everything feels much slower and less responsive than it used to be and I'm frequently getting the spinning pinwheel.
+ Parallels doesn't start any more. After double-clicking the Parallels desktop icon, the icon jumps up and down in the dock for a little while and then just disappears.
The problem may or may not be related to the removal of my Bootcamp partition, which I did shortly before the problems started to occur. I don't remember if the problems started immediately after the removal of the Bootcamp partition but I think it's likely that there is a connection.
I did lots of things to find the cause and solve the problem, to no avail:
+ Made sure that after the Bootcamp removal the Mac HD is selected as the start volume.
+ Checked the HD using Disc Utility (no errors found)
+ Repaired permissions using Disc Utility
+ Created a new user account (problem persisted)
+ Cleared system caches
+ Ran various checks using Onyx (no problems found)
+ Deleted PRAM by starting up and pressing ALT-CMD-R-P
+ Checked for viruses (no viruses found)
+ Unplugged all USB devices
+ Reinstalled OS X ("archive and install")
None of this helped.
Observations:
+ I tried to start in safe mode but that made the startup procedure even slower, I was seeing the Apple logo and the grey spinning wheel for almost 10 minutes alone.
+ According to Activity Monitor there's always lots of free memory and CPU power.
I'm really clueless as to what else I could do other than wiping the HD and reinstalling everything from scratch or sending the machine back to Apple. Any ideas would be *very much appreciated*!

Hard to believe, the problem is back!
Everything worked just fine last night. This morning I turn the iMac on and the problems are back: Extremely long time to startup, application hangs, everything super slow.
Any ideas?
I restarted in verbose mode and took some pictures, in case that helps...
http://gallery.me.com/cjanz#100008

Firewall/VPN Model-SG300 Cyberguard after configuration internet working very slow....please help me...

HI FRIENDS,
i have one firewall model number sg300 i configured each and everything
but after configuration internet working very slow.if i want to open any website it is taking 5 min .i connected
my lease ling directly in this device.
please help me....
Thanks,
Madhukar

Hi Madhukar,
It seems that it is not a hyper-v issue .
For troubleshooting this please use your computer to access internet directly (without firewall ).
If it works well , you may go over the configuration of the firewall .
Also you can contact the hardware vendor .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

[Other 865 Series] 865PE Neo3-F (SATA and PATA problems),please help,thx

Hi
I have MSI 865PE Neo3-F mainboard and I have a few little problems with Neo.
My first:
I have HDD Maxtor DiamondMax10 300GB,16MB cache,SATA.When I was installing Windows,(widows setup) it shows that HDD has only 131GB.BIOS shows 251GB.what does it mean?Not supported HDD or only 130GB for one partition?
My second:
I want to connect also P-ATA HDD,but BIOS don´t see him.
What would be IDE settings in BIOS and also jumper settings on PATA HDD and DVD when I want use:
SATA as Primary Master (system disk)
PATA as Secondary Master
DVD-ATA IDE as Secondary Slave
My last:
What I should installing when I want to use all advantages of SATA HDD and what would be BIOS settings?
PLEASE HELP IT IS URGENTLY,CAUSE I HAVE TO WORK TO MY SCHOOL
ANY HELP WOULD BE APPRECIATED.
Thank you

At the first thank you for your reply.
Yes it works.
Sorry I didn´t post my OS.My OS is XP (with SP2,now).
Configuration:
P4 Prescott 540J 3.2GHz,FSB800MHz,HT (enabled)
MSI 865PE Neo3-F
2x APACER 512MB DDR400 (Dual channel,slot 1 and 3)
ASUS FX5700 256MB
Maxtor DiamondMax10 300GB,16MB cache,7200rpm
DVD-RW Plextor 716AK
After installing Service Pack 2 windows shows that HDD has 300GB,but I created two partitions before (C:\ [30GB] and D:\ [100GB] in windows setup) and now (after install SP2 E:\ [170GB]) one partition in Windows.Problem how do I put together last two partitions (D:\ and E:\) to one partition?
so if I right understand after this settings in BIOS:
Native Mode
ATA Configuration - PATA only (or SATA-only)
SATA Keep enabled - yes
PATA Keep enabled - yes
PATA channel selection - both
and what about another two options in this menu?what are the settings?(somtehing about 1st channel and so on)
connections looks like that:
on IDE ATA100 cable from IDE1 will be connect HDD ATA100 as Master and DVD as slave?
on SATA cable from SATA1 will be connect HDD SATA?
How system knows which one from two Masters HDD is System disk?from Boot menu?
Is some page on the web where can I find closer explain of IDE (SATA) settings for MB MSI?
Sorry for questions,but I am working at the first time with SATA disk

The update and other problems PLEASE HELP!!!

The ovi store on my phone asked me to download the newer version which I did, is there an update for ovistore on the computer because I haven't heard about it if there is one and it may solve the problems I have been having with it:
1. I don't receive the messages when trying to get an app
2. It wont let me down load apps when I connect my phone to the computer
(also on the nokia website it told me to click the download and install button to get an app when plugged into the computer but I can't find it..Any ideas where it is???)
please help i've had this problem since I first set up my account and its really bugging me now!!!!!!

(Apologies for barging in Steve.)
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80071A91, or some other number? (If they're another number, what number are you getting?)

Movies and Audio Problem - PLEASE HELP!!!!!

Hi,
If I am working on the music for a movie file i sometimes open a new project with no global tracks, so as i can focus on the music, when i then choose to open the movie and see what the music sounds like with the movie all is fine..... until i stop the movie. If the movie is not playing or doesnt have the volume slider raised high (on the movie window), no sound is heard when i press a key on my midi keyboard. This means i can only come up with ideas when the movie is playing. If i close the movie and/or the global tracks, the problem remains the same. I have to close logic an reopen it in order for me to hear any sounds (audio tracks and midi). Any advice or help would be great as this is really frustrating me. Thanks, Ben

I use Logic Plug ins and Korg/Steinberg plug ins. I have a multi instrument set up in my environment for an external Korg Trinity Keyboard. It is no longer connected as it was too difficult to control program changes etc and recording in audio takes too long for me. This many be the problem??? Maybe i could remove the multi and see if this helps. I am thinking of re-connecting the Korg to my computer but am not sure if it will cause more problems. Any advice? Thanks... Ben

Substri and instr problem --Please help

Hi ,
I would like to get the find tablename starts with 'EXP' using substring and instring . I am using oracle 9i. Please help me out
Example : 'Schema.explogtable'
I will use table name ' EXP' in one of my procedure as input parameter to procedure
If tablename= substr('schema.explogtable','instr('schema.explog','.',1,3) then
Execute Procedure1('tablename')
Else
Execute procedure2('tablename')
I would appreciate your help
Regards,
Clarkc

ClarkC,
Here just replace procedure1 and procedure2 with your procedure names;
create table temp_table
( table_name varchar2(30)
insert into temp_table values ('TESTME.MY_OBJECTS');
insert into temp_table values ('TESTME.OBJECTS');
insert into temp_table values ('ABC.ECFOBJECTLOG');
insert into temp_table values ('XYZ.BDEOBJECTTABLE');
insert into temp_table values ('ABC.ABCTABLE');
insert into temp_table values ('ZYD.CLIENTTABLE');
insert into temp_table values ('NMS.CLIENTLOGTABLE');
COMMIT;
pl/sql anonymous blocks I defined 2 variables for readibility and understanding
DECLARE
   CURSOR tcur
   IS
      SELECT table_name
      FROM temp_table;
   table_name   VARCHAR2 (40);
   my_table     VARCHAR2 (40);
BEGIN
   FOR cur IN tcur
   LOOP
      my_table     := NULL;
      my_table     := cur.table_name;
      table_name   := SUBSTR (my_table, INSTR (my_table, '.') + 1);
      IF (table_name LIKE ('%OBJ%'))
      THEN
         DBMS_OUTPUT.put_line ('table_name containing OBJ=' || table_name);
         -- NOTE : CALL YOUR PROCEDURE1 HERE for tables containing OBJ;
        procedure1(table_name);
      ELSE
         DBMS_OUTPUT.put_line('table_name not containing OBJ=' || table_name);
           -- NOTE : CALL YOUR PROCEDURE2 HERE for tables not containing OBJ;
        procedure2(table_name);
      END IF;
   END LOOP;
EXCEPTION
   WHEN OTHERS
   THEN
      DBMS_OUTPUT.put_line (SUBSTR (SQLERRM, 1, 300));
      RAISE;
END;
Here is the output of the above block
table_name containing OBJ=MY_OBJECTS
table_name containing OBJ=OBJECTS
table_name containing OBJ=ECFOBJECTLOG
table_name containing OBJ=BDEOBJECTTABLE
table_name not containing OBJ=ABCTABLE
table_name not containing OBJ=CLIENTTABLE
table_name not containing OBJ=CLIENTLOGTABLEHope this helps
Regards
Edited by: OrionNet on Jan 17, 2009 11:48 AM

Itunes connection and Passcode problem (Please Help!!)

So, my computer recently was broken beyond repair.. so when I got a new computer and redownloaded itunes i tried to connect my itouch to charge it and i noticed it said "Itunes cannot open ipod in library please imput password on ipod" I never put a password on it... aparently one of my friends did. So I was being a total DA and attempted to guess the password too many times now the ipod's disabled untill i can connect to itunes and itunes wont let me connect untill I get the password, I'm at a total loss please help!

You need to place the iPod in recovery mode and then connect it to your new computer and restore it via iTunes. Note that you will lose all content on the iPod. You can redownload apps at no additional cost provided you are signed into the same iTunes account that originally purchased the apps.

Video and audio problem, please help!

Every time I stream a video or play a DVD, the video and sound freezes for about ten to twelve seconds continously. It is very irritating and rather inconvenient.
Does anyone have any idea why? I just switched to a Mac and am loving it so far. I would hate to have to take my laptop in.

Toggle Linked selection. Shift-L. Or press the button over by snapping in the top right of the timeline,
-Jake

Nokia E61i and iSync problem - Please help!

I had the Nokia E62 and I was syncing with my macbook pro without any any problems. Last week I got the Nokia E61i and installed the plug-in for the isync from the nokia website. I have been unable to sync the 2 phones. I have deleted the phones from isync and reset the phones but no luck. I have tried both bluetooth and cable. The isync connects to the phone but give me an error message - "An unexpected error occured. Device 'Nokia E61i' synchronization failed"
Please I need someone to help me resolve this problem.

This Apple Tech Support Document seems to mention exactly your error:
iSync: Error message when synching phone via Bluetooth in Mac OS X 10.4.9 or later

G580 Very slow, and mouse problems, please help

Similar Messages

Maybe you are looking for