General question about data recovery from raid on windows server !

hi,
I like to buy data recovery software for windows server  to recover data with  any raid( or whitout raid
so the company tells me you should be sure the Raid can be recognized correctly as local disk drive first, otherwise, our product  wil not help you.  so if I want to recover data of my customers which has windows server with any raid form ,how
I can make this server harddisks(which is raid 1,5,6 ect)recognized coorectly as local disk drive.
thanks
johan
h.david

I have myself NAS which is connected to my computer through router.
I am started smal bussines ,and I want to use also data recovery service for deleted documents,photo's,formatted drives ect.for my customers .things that accidantally errased from raid or non raid
so I found some data recovery softwares
1-stellarphoenix data recover,which has remote acces and netwerk acces.
2--ease use data recovery software.  I liked this second software,but they telling me like this,
you should be sure the Raid can be recognized correctly as local disk drive first, otherwise, our product  wil not help you.
I understand the both situations you telling me.thanks
but my question is can I not run data recovery software from bootable usb stick on the smal  servers like essential with raid to recover data in case of any problems that caused data loose.
I know if I install data recovery software on the server to scan it ,it wil rewrite some places on harddisk and that is not wise.
h.david

Similar Messages

  • I have a question about data aqusition from PCI bus

    Hi.
    I am designing a PCI card.I wonder if I want to do some process in LabVIEW,such as power spectrum analyse, oscilloscope, do I have to transfer the data continuously from my card?
    Thank you.

    Simple answer - no.
    More complex answer - LabVIEW is just like any other programming
    language when it comes to data collection frequency.  The
    frequency (intermittent, continuous, timed, etc.) depends upon the
    analysis you are attempting.  To do power spectra or display
    waveforms, all you need is one set of data at a time.  The data
    does not have to be continuous.  There are classes of problems
    which require continuous data.  If you are trying to address them,
    you will need to have this mode of operation available.  Most NI
    input boards offer both modes - continuous and intermittent, with
    intermittent being the most used, by far.
    Note that with proper buffering, both modes end up being about the
    same.  Whether your buffer resides on the card (preferred, is more
    robust, data transfer timing is not so critical) or in the computer
    main RAM, the LabVIEW side of things will always take a single set of
    data at once.  Admittedly, this data set can be one point at a
    time, but you really don't want the overhead of that in LabVIEW (or any
    other higher level function - should be in your driver).
    This account is no longer active. Contact ShadesOfGray for current posts and information.

  • General question about dates

    I'm starting to scan my old slides and negatives and am scratching my head about "fuzzy" dates.  Sometimes it's not clear when a photo was taken, so either a date range, such as 9-12/1970 is used, or maybe something like Early/1970.  How does one handle that situation in pse?

    I maintain a library of historical and family photographs and I have struggled with this challenge for years.  I finally have a solution.  I use IDImager, a digital asset management application used mainly by professional photographers.  It has (parametric) editing capability and some users (like myself) are able to use it exclusively for their digital photo needs.  Others use it in combination with apps like Lightroom, Photoshop, PS Elements.
    It (http://www.idimager.com) does not natively address the fuzzy (unknown or partially known) date problem, but does allow the end user to create and manage custom XMP fields which opens the door to make this problem solvable to the end user.  IDImager is written in Delphi and allows user-created scripts to run within IDImager.  Users can submit scripts to the IDImager Resource Repository to share their scripts with other users.
    I have submitted a collection of scripts and custom XMP definitions to the repository called "HouseOfUlrich toolset for unknown and partial dates".  It is a collection of custom XMP fields and scripts that make it easy to tag and manage photos with "fuzzy" dates within the existing framework of IDI without a major disruption to the workflow. Meaning... it doesn't take much longer(if any) to assign a "partial" date to a photo than to assign an exact one and images are still sortable and searchable without being treated separately from photos will fully known date/times.
    You can download the toolset free from: http://repository.idimager.com/cgi-bin/idi_script_repository.exe?action=scriptDetails&scri ptID=567594c9-1b90-4f94-4641-4fccb60dc8ea  and read the readme file for all the details.  But to summarize, the toolset, without modification supports
    1) a boolean value to indicate the date is unknown/partial (use this unless the FULL date and time is known)
    2) a boolean value to indicate the date is approximate
    3) fields to store year, month, day (and these fields DO support ## - special character to indicate unknown).
    4) scripts that can "convert" traditional EXIF date/time fields to the Custom XMP fields, leaving the original EXIF unchanged, of course.
    IDImager allows for custom XMP to be used in rename functions, so I can employ the custom XMP fields I use to automatically create/change filenames to create naming conventions like:
    [email protected] (to indicate photo taken at 11:23:23 PM on March 3, 2007)
    1910-05-##@##-##-##_circa.jpg (to indicate a photo taken ABOUT May of 1910.)
    192#-12-25@##-##-##.jpg (to indicate a photo taken on Dec 25 sometime in the 1920s.)
    I have chosen to implement using the "approximate" value in combination with months to indicate times of year.  For example, for photos in summer of 1935, I would use Circa (approx value) 07 1935.  But both IDImager and my toolset are open-ended and would allow for users to define and use alternate XMP fields like Early,Mid,Late or Spring,Summer,Fall,Winter.  I choose the numeric values corresponding to months and the "approximate" value because they are more easily lent to other scripting and sorting functions within both IDImager and the operating system.
    Something else that could be implemented, although I have chosen against, is the use of a "date range" using one field for "as early as" and another for "as late as".  I see this method as more trouble than its worth as it would not lend well to sorting, name, searching etc.  I think the ability to set year,month,day all to either known/unknown in combination with defining the entire date as approximate is better.  For rare cases where one wanted to store the fact that a photo was taken as early as/as late as....I would recommend just storing that info as a string in the description field.  For example, I have photos taken of soldier's during WWI.  If it is not possible to determine whether late or early in the war, I would tag it as Circa 1916 (or 1910s).  But could still use the description field to write "taken during WWI (probably 1914 - 1918)".
    One other final note: If Adobe or some other player in the digital photo market does ever create an updated XMP or EXIF schema that support unknown or partially known dates, it will be possible, with IDImager, to migrate the information I store in custom XMP fields to the new standard fields.
    hope these resources help other solve the same challenges I finally overcame.  happy tagging.
    Brian

  • Question about data extraction from web forms

    I am developing a simple web form in DreamWeaver MX for
    increased accesibility for users who utilize screen reader
    software, as navigating PDF forms is still currently very difficult
    for most of the screen readers to navigate. I was wondering if
    there is a way to take an .asp webform that a user fills out and
    when they hit a print button it would extract the data from the
    form and open an Adobe PDF form and populate the data they entered
    into specific fields within the PDF form which would allow them to
    print an official copy of the form they used the web version to
    complete. Any insight into this possibility is greatly appreciated!
    Thanks,
    AU PSD

    Regex? Lots of indexOf? Parsing...

  • Question about data migration from one company to new without transactions

    Dear All,
    My company is using SAP B1 2005B. I would like to create new company which is based on existing one, including all configuration, chart of A/C and BP records and so on. May I know how to do it?
    From Samson

    I tried it and i got the runtime error with "Microsoft Visual C++ Runtime Library"
    When I tried a part of options, that is no problem at all. However, when i select all options, the memory usage is increase and then the error will be returned.
    The server is Win2003 with 4GB memory.
    From Samson
    Edited by: samson leung on Sep 21, 2009 6:40 PM

  • Can I get a data recovery from Apple if my iMac was in the hard drive replacement programme and I wasn't notified about it?

    Basically my iMac just crashed and I searched on Google for replacing my hard drive and came across the iMac 1TB Seagate Hard Drive Replacement Program at http://www.apple.com/support/imac-harddrive/
    Which is that Apple is asking all 2009 - 2011 iMac users to return their iMac for a free hard drive replacement because it currently has a fault in it. After entering in my serial number, I see that my iMac is elegible for a replacement.
    I did register my iMac with Apple, but I didn't receive any email about this program and I lost all my recent data because of the faulty hard drive. I never had an issue before with the drive so this just happened out of the blue.
    Is it possible to get a free data recovery from Apple for this? I find that it was a lack of communication that I lost most of my data.

    I completely understand that it's my responsibility to back up my data but I have it set to every 2nd month, not on a weekly or daily basis to back up the data.
    Apple might not be in data recovery business but could they not acquire a third party to do this?
    This is what happened:
    It was on sleep overnight and when I tried waking it, it was lagging badly. So I shut it down and restarted it. I phoned into techincal support to find out whats wrong, but they were giving me advice to reset the params etc. But i think it made it worse because it didnt want to get passed the white start up screen.
    So I phoned back to ask if it's a usual issue with my version of iMac and the man replied that it isn't common and that I should run the disk utility to check the hard drives health.
    I installed Mountain Lion on a USB and started the disk utility. Then it highlighted in red that it's a hardware fault and cannot be repaired by the disk utility. Therefore the hard drive has a serious fault with it.
    That's when I Google'd for a replacement drive and came across the program. The techincal guy didn't even tell me about it or anything.
    If I knew about this sooner, I would have taken it in for a replacement.

  • General question about iTunes Match and multiple libraries

    Hello to everyone,
    I have a general question about the iTunes Match service, which is available since yesterday in my country (Italy). Currently my library situation is the following:
    Computer A (desktop, Windows 7): "big" iTunes library (about 20 GB), at the moment not associated with my Apple ID
    Computer B (MacBook Air 2011): "small" iTunes library (about 5 GB), associated with my Apple ID
    At the moment, both my iOS devices (iPhone 4 and iPad 2) are synchronized with the smaller library on the MacBook Air.
    Question is as follows: should I subscribe to iTunes Match, would it be possible to upload the "big" library (provided I associate it with my Apple ID) to iCloud while keeping my devices synchronized with the "small" one?
    Ideally, at the end of the day, the situation should be the following: both iOS devices with music from the small library + possibility of downloading songs from iCloud (coming from the big one). Is this possible?
    Maybe the question sounds stupid, but I want to be sure about this before paying for the service.
    Thanks a lot.

    Yes, you could also associate your larger library with iTunes match if you associated your Apple ID with it. However any purchases in the library made from another Apple ID will not be matched with iTunes much.
    If both libraries are part of iTunes match, then all your devices will see all of the content from both libraries, which content you choose to have on those devices and which you have accessible via iTunes match is entirely up to you.

  • General Question about SAP Documentation. Where to find?

    Hello,
    I am relatively new in the SAP business and so I have some general questions about the SAP Documentation.
    Often internet-links like
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIBP/FI-AP-AP-PT.pdf
    are posted here by group members.
    But where do these group members find these documents?
    All I can see at help.sap.com is IDES (the model company created by SAP)and the WWW-version of the SAP-Bibliothek.
    Were can I find these PDF-Files?
    I would appreciate any hint and tip!
    Thank you!
    Kakue

    thats true! i dont know how to find either. Everytime i need something i ask on the forum.
    Here's a good link
    http://www.easymarketplace.de/online-pdfs.php
    Plz reward points if helpfull

  • Newbie question - general question about e-mail sync

    Hi,
    I have a general question about email sync and BlackBerry smartphones.  Are there any devices that allow email syncing with a Microsoft Exchange 2007 system that do not require the BlackBerry Enterprise server?
    Thanks; sorry if this has been asked before but I was unable to find it in the forums, documentation, etc.  Everything I found assumes that for this kind of environment you will be using a BlackBerry Enterprise solution, but I can't assume.
    Thanks again.
    Solved!
    Go to Solution.

    Hi and Welcome to the Forums!
    If the Exchange server has anything that faces the internet (OWA, POP, IMAP), then BIS can be used to handle email (only email...calendar and contacts require BES to sync OTA).
    Or, a PC, inside the network (but with an internet path) and logged into the email server (using Outlook), can be left running, using the RIM Desktop Software's Desktop Redirector capability to forward  messages to the BB.
    Those are basically the options.
    Hope that helps! Let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Question about receiving mesage from those not on ...

    I have a question about recieving message from those who are not on my contacts
    I enable anyone to contact me through IM and call. a  friend who I did not yet add as a friend (not in contact)call me by mistake.  he sent message of apology to me, say "sorry for mistakeing call,"
    but, i did not recieve such mesage, even thoughh i got notification of call, why did not i recieve his mesage if i Can receive IM from anyone not on contact list??
    i try to send him mesage to test. He also did not see my mesage show up  ,, on his screen it only show that he call by mistake and that he sent mesage ((which,  i never recieve).
    i try this on some of my friend's friend who has enable all call and IM through, they also did not recieving mesage I sent them however can see notification of call i make.
    does this mean, Only you can see mesage of those in contact list even though you recieve from any body? am i misunderstand How skype is working? Please enligthen me, thx...
    thx for info.....

    I'm not sure I understand you entirely, but you could put the CDs on the computer with a CD ROM drive and then boot that computer as a firewire drive to the computer without a CD ROM drive and then copy your music over.

  • Tell me how to format a date retrieved from a MS SQL Server 2000 database?

    Tell me how to format a date retrieved from an MS SQL Server 2000 database for various uses in my JSP page?

    Or if you want to use JSTL instead of a scriptlet see:
    http://forum.java.sun.com/thread.jspa?threadID=676754&tstart=0

  • Migrating DHCP Server From OpenSuse to Windows Server 2008 R2 Standard

    Hello,
    I'm planning to migrate a DHCP server from OpenSuse to Windows Server 2008.
    Is there any procedures for that ,Or should i configure my Windows server 2008 DHCP service again.
    Thank you 

    Hi,
    I have done somthing similar in the past. Basically i got exported all the scopes and settings from the linux dhcpd service, then created the scopes in Windows, stop linux dhcp service and start windows one. Use conflict detection setting to leverage any
    IPs lease from linux server.
    Hope it helps.
    Regards,
    Calin

  • Data recovery from a disk that is unmounted

    Here is my problem:
    disk utility had indicated that I had a couple of bad blocks in my start up disk and recommended that it be replaced. Since I already had a second internal hard drive with plenty of room on it, I simply installed OS 10.4 on the second hard drive and designated it as the startup drive.
    Then I ran maintenance on the problem drive. After spending an hour or more grinding through every sector it appeared that the drive would pass master. However for some reason it hung up, stopped making progress and disabled my computer, i.e., I could move the cursor but could not click anything or select anything. Finally my only choice was to manually shut down and restart. Restart seemed to work fine except the disk on which I was performing maintenance did not show up on the desktop.
    Finally I was able to locate it using disk utility and discovered that the mount point was missing and it was not mounted. Of course this is what I should have expected since techtool pro unmounts a drive while it performs maintenance and when I had to interrupt, it did not remount.
    I spent three days trying to find a way to remount it, including downloading MountMe. Strangely when I ran MountMe it recognized the drive and gave me a successful remount message, but the drive was not actually remounted according to disk utility.
    I have moved the drive to a different G-4 with no more success.
    my greatest problem -- I had used Backup from .Mac but apparently was not careful enough about where the backup file was located. Generally I download to my desktop and then if I want to save a download I move it to an appropriate location. Unwisely I had done the same with backup which means of course that when the old startup drive crashed it took my desktop files with it.
    Included among those backups were all of my financial records (Quicken) for the year. Three checking accounts, all of my credit card accounts, all of my business accounts, etc. I am talking about days of contacting credit card companies and banks for replacement of records for the year and, worse yet, they don't have the details in their files regarding the accounts to be charged nor do they have any info about inter account transfer, etc., etc., etc.
    So, I am looking for a reasonably priced service provider to copy my defective hard drive for me. I don't think there is any problem with the data on the drive, I just can't get it remounted.
    Maybe someone knows how to work around the mount point problem????
    My main desktop computer is a G-4 quicksilver with dual 800, OS 10.4.3 and 1.4 GB of memory.
    thanks,
    John Cleek

    Whenever someone reports issues with their drive my first question is always, "Do you hear any unusual noises coming from the computer?"
    What I'm listening for is anything like grinding, scraping, what we always call 'ping-ponging' or other unusual clicking noises that would indicate a mechanical problem inside the drive. If you don't hear anything unusual then the problem is more likely to be corrupt volume information or a broken hard drive controller board.
    If you hear noises then my recommendation is to stop trying to get anything off the drive because any more attempts would do yet more damage.
    The only data recovery company I've used is www.drivesavers.com. I've called them multiple times to get quotes and their reps always seems to actualy have an idea what they're talking about. It is very expensive to use a service such as theirs but sometimes it is the only option available.

  • Data recovery from N95 8Gb internal memory

    Hello
    My girlfriend's N95 8Gb came to something of a nasty end over the weekend. No screen, no keyboard, camera unit's out, but, with a battery the lights still come on. The question is whether we can recover anything from the internal 8Gb flash memory. Any thoughts as to whether anything's salvageable and/or how to go about it? Has anybody been in the same position and succeeded in recovering any data?
    Cheers

    Thank you for your replies cjlim and jjegan.
    The main problem I've got with mass storage mode is that with no screen nor keyboard I can't really select anything. I suspect when I connect the USB cable its probably waiting for me to select mass storage or PC Suite modes before it registers as a device on my PC. At the moment I therefore don't know for sure the connection's working. As I say the lights come on, so I'm hoping the main board is still in some sort of working condition. Guess I could see if the Nokia service centre could add a keyboard and screen??
    Although costly I'd be quite happy to pay a data recovery specialist to get the images back, but I'm wondering how to even find such a specialist. I've searched google for a data recovery specialist in Singapore, but to no avail. They all seem to be fine with flash memory cards (as I am), but seem to baulk at an internal flash memory chip.

  • Need info about data recovery services

    My main hard drive on my Mac G5 crashed on Saturday, and I'm sending it to Drive Savers today. My question concerns security and confidentiality. I have some files on the drive that I would prefer that no one looks at. To what extent, if any, do these places open and look at the contents of individual files? I can't imagine they look at everything. A typical drive like this will have 100s of thousands if not millions of files.
    Thanks for any info.

    Hi mrsaxde-
    The sad reality is that once you hand over your data to anybody you really have no assurance that your files will not be looked at.
    Most likely I would suppose that data-recovery services would not want to get a bad reputation as "the company that looks through your personal data", or something similar, and would be sensitive to such things.
    I would suggest a Google search of that recovery company and see what folks might have to say.
    I have all of my stuff backed u in triplicate, generally due to paranoia about things like this happening. This is unfortunately an expensive and scary lesson in support of a proper backup routine.
    Luck-
    -DP

Maybe you are looking for

  • New to Mac's - iTunes "issue"

    Hi all, Just purchased my first mac today (only a mini I'm afraid!) Very very pleased with it so far but having an iTunes problem. All my itunes library on my windows machine was/is installed on an external usb hard drive. The drive was instantly rec

  • My phone is saying a number is invalid when its always worked before

    so i was talking to this person and then i fell asleep around 12AM i get a txt from them and i try to txt them back and it keeps saying that there number is invalid but it has always worked before and when i try to call them it rings once or twce the

  • How can I order a spanish wireless keyboard?

    I want to order the wireless keyboard for my Ipad 2 but can't find the option to choose a spanish keyboard, does anybody knows the direct link or how can I do so? Thank you!

  • Can not make call to Canada no!!!

    I'm having a subscription for calling unlimited to Canada. But while I call once of my friend in Canada. skype usually said that the number is uncorrected or unavailable. However, I able to connect to him sometime. So what wrong with my account?

  • 042Complete Album sub=less then Actual Property Purchase Goto Tower Records

    I love my shuffle, I'm a new iTunes subscriber. I really like the iTunes program and the visualizer looks awesome on my 23" apple cinema. I recently completed 2 albums for the $9 sale iTunes offer, (Mushroom Head - savior sorrow & Seether). i thought