Generate .PDF file from BlackBerry application

Hai,
Can anyone explain or give me some idea on generating pdf file in blackberry application programatically...
Thanks in advance.
Regards
Ratheesh R Kurup

hi Kiriakos,
which version are you using ?
please test this with reports 9i since PDF support
has been enhanced there.
to test i would suggest to run the report from rwclient
as well and specify desformat=pdf and to a generate to
file within builder to see if the same behavior occurs.
if this problem reproduces there as well i suggest
to contact oracle support to log the problem.
regards,
christian

Similar Messages

  • Error while Generating PDF file from Datagridview .

    Hi every one,
         I'm trying to generate pdf file from datagridview,while executing my code getting nullvalue exception..
    Here is my code:
    private void btnexportPDF_Click(object sender, EventArgs e)
                //Creating iTextSharp Table from the DataTable data
                PdfPTable pdfTable = new PdfPTable(dataGridView1.ColumnCount);
                pdfTable.DefaultCell.Padding = 3;
                pdfTable.WidthPercentage = 30;
                pdfTable.HorizontalAlignment = Element.ALIGN_LEFT;
                pdfTable.DefaultCell.BorderWidth = 1;
                //Adding Header row
                foreach (DataGridViewColumn column in dataGridView1.Columns)
                    PdfPCell cell = new PdfPCell(new Phrase(column.HeaderText));
                    cell.BackgroundColor = new iTextSharp.text.BaseColor(240, 240, 240);
                    pdfTable.AddCell(cell);
                //Adding DataRow
                foreach (DataGridViewRow row in dataGridView1.Rows)
                    foreach (DataGridViewCell cell in row.Cells)
                        pdfTable.AddCell(cell.Value.ToString());//nullvalue exception
                //Exporting to PDF
                string folderPath = "C:\\PDFs\\";
                if (!Directory.Exists(folderPath))
                    Directory.CreateDirectory(folderPath);
                using (FileStream stream = new FileStream(folderPath + "DataGridViewExport.pdf", FileMode.Create))
                    Document pdfDoc = new Document(PageSize.A2, 10f, 10f, 10f, 0f);
                    PdfWriter.GetInstance(pdfDoc, stream);
                    pdfDoc.Open();
                    pdfDoc.Add(pdfTable);
                    pdfDoc.Close();
                    stream.Close();
    Thanks & Regards RAJENDRAN M

    Hi Rajendran,
    The second question is about the usage of iTextSharp library, which is not a MS product, please post in their forum for help:
    http://support.itextpdf.com/forum
    Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Generated pdf file from oracle reports show bad characters

    Hello all,
    Iam fighting with a problem with generated pdf file from oracle reports which show some bad characters. I was searching for some information but it didnt help...
    I have Oracle Database 11g R2 (or 10g R2) on Oracle Linux or Windows, Oracle forms and reports 6i (i know that is very old and not supported with 11gr2 but we are in this scenario).
    NLS parameters are set like this
    server:
    NLS_CHARACTERSET EE8MSWIN1250
    NLS_TERRITORY AMERICA
    NLS_LANGUAGE AMERICAN
    client:
    NLS_CHARACTERSET EE8MSWIN1250
    NLS_TERRITORY SLOVAK
    NLS_LANGUAGE SLOVAKIA
    When I run Oracle Reports it show perfect in display and when I try to print them, they are all good with good characters, but when I try to generate pdf file, some characters like č,š,ľ are not displaying corectly... This happen only when try to generate to pdf...
    I try to work with uifont.ali on client side but without any result. Fonts for reports were installed on client and server side... Can someone help me with this problem? Thank you very much for every advice.
    Martin

    Hi Sergiusz,
    Thank you for your reply. I look at what you wrote and try to make some test...
    1) For first I download FontForge, which can generate type1 font from true type. So I open FontForge and open my Arial.ttf font and use "Generate Fonts" to save my Arial.ttf font to pfb and pfm (whoch are need to set in uifont.ali). I have to change encoding, because my font has 2byte encoding so I reecondode the font from ISO10646-1 to ISO8859-2 and generate to pfb.
    2) Then I navigate REPORTS_PATH from regedit to my *.pfm and *.pfb files.
    3) I add these lines to end of my uifont.ali
    [ PDF:Embed ]
    Arial = "Arial.pfm Arial.pfb"
    ArialNarrow = "ArialNarrow.pfm ArialNarrow.pfb"
    4) Then I generate my report but nothing change... I check "Font used" in my pdf file, but there were not my fonts embedded I guess..
    I also try PDF:Subset, but it doesnt change anything... I try PDF aliasing to see if my uifont is working - this work very well, but I dont need to change font...
    Any other advice? Thank you so much to everyone!
    Martin

  • How to generate PDF file from HTML file using Acrobat API's

    Hi,
    I want to generate a PDF file from an HTML file on server side(C# .Net).
    Their is a COM interop called "AcrobatWeb2PDF" availaible but could not find any document regarding how to use it.
    I cant use "Adobe live cycle PDF Generator" as we just have license for Adobe Acrobat 8 Professional.
    Please help...
    Thanks and Regards,
    Anand Mahadik.

    > It is hard to believe that Adobe doesn't provide a toolkit for generating PDF files, so many web based applications have vector based content that needs to be converted to PDF!!!!
    They do, it's just not free (A company in business to make money? I'm sure IBM would never think this way... ;)). As mentioned you have Adobe LiveCycle PDF Generator, which you can customize and extend with Java. You also have the Adobe PDF Library SDK, which is written for use with C/C++ although if you license it from Datalogics (the only company in NA Adobe allows to license the PDF Library) you will also get .NET and Java interfaces (part of the DLE - DataLogics Extensions).
    > There must be a way to generate PDF dynamically on a server or from Javascript!
    JavaScript? Not really, no. As far as I'm aware JavaScript has no file system access capabilities without some form of intermediary (like sending the data to a webservice that writes it out to file). How would you create a PDF file with JavaScript?
    The PDF Standard is also in ISOs hands now (ISO 32000-1:2008), it is no longer owned by Adobe - you can download a copy of the specification from them and write your own library based on that as well.

  • Can you generate PDF file from LabVIEW?

    Can you generate a PDF file from LabVIEW?

    Hi there,
    I just read this post in passing.
    Heres a fairly detailed forum post on the matter - seems to be a few work arounds, but basically no you can't with just the normal labview.
    http://forums.ni.com/ni/board/message?board.id=170&message.id=259103&query.id=65866#M259103
    Thanks
    Kind Regards
    James Hillman
    Applications Engineer 2008 to 2009 National Instruments UK & Ireland
    Loughborough University UK - 2006 to 2011
    Remember Kudos those who help!

  • Generating PDF-files from HTML-page saved as Unicode?

    I have followed this Quick Start on how to generate a PDF-file from HTML using web services in .NET: http://livedocs.adobe.com/livecycle/8.2/programLC/programmer/help/000093.html
    It works just fine when the html-page is saved as ANSI, but when it's saved as UNICODE I get problem. The code runs without errors but the PFD looks really strange. Any suggestions on how to solve this? I really need to use UNICODE as my application needs to handle different languages (including for example Chinese).

    I found out that UTF-8 worked as well so the problem is solved. :-)

  • Generate pdf file from 9i reports and save it in C:\oracle_reports\

    i want to generate a file from oracle reports in PDF format and want to save it on already defined path.
    c:\oracle_reports\
    right now pdf generation of report is working fine but before generation of pdf report system prompt me or open a dialogue box to save my pdf file on drive. i dont want to see these dialogue box or prompt me to explicitly save it.
    i want all the work done automatically.
    regards
    ------------ source code--------------
    PROCEDURE PRINT_PROC IS
    repid REPORT_OBJECT;
    v_rep VARCHAR2(100);
    rep_status VARCHAR2(20);
    pl_id ParamList;
    report_path varchar2(100);
    aud_sno varchar2(1000);
    aud_type varchar2(500);
    BEGIN
         pl_id := Get_Parameter_List('report_data');
         IF NOT Id_Null(pl_id) THEN
              Destroy_Parameter_List( pl_id );
         END IF;
         pl_id := Create_Parameter_List('report_data');
         User parameters : Customize these to fit your report
         report_path := :GLOBAL.Web_BASE_PATH||:GLOBAL.PATH_SCM||'REPORT\scm_rfq.rep';
    -- Initialize your report parameters here
         Add_Parameter(pl_id, 'p_cmp_code'                     , TEXT_PARAMETER, :global.company_code);
         Add_Parameter(pl_id, 'p_rfq_sno'                     , TEXT_PARAMETER, :document_sno);
         Add_Parameter(pl_id, 'P_PATH'                               , TEXT_PARAMETER, REPORT_PATH);
    Standard parameters: Don't change
         Add_Parameter(pl_id, 'PARAMFORM' , TEXT_PARAMETER, 'NO');
         Add_Parameter(pl_id, 'PAGESTREAM' , TEXT_PARAMETER, 'NO');
         Add_Parameter(pl_id, 'MAXIMIZE' , TEXT_PARAMETER, 'YES');
         -- end standard parameters
         repid := find_report_object('REPORT_OBJ');
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rep_oas');
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,report_path);
    -- SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'htmlcss');
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,'\\ORCLSRV\UTL_MAIL\'||:doc_type||:receiver_sno||'.pdf');
         v_rep := RUN_REPORT_OBJECT(repid,pl_id);
         rep_status := REPORT_OBJECT_STATUS(v_rep);
         WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
         LOOP
         rep_status := report_object_status(v_rep);
         END LOOP;
    END;

    If you use rwclient you could that easily, from a Form, it requires additional steps.
    Look at this thread Re: save report

  • Generate PDF file from a report using greek characters

    Dear all,
    I tried to generate a PDF file from a Report having greek characters on it.While in previewer I could see everything OK, when PDF file was generated all greek characters had been substituted by symbols...
    Any ideas, suggestions and workarounds are welcome.
    Thanx a lot!

    hi Kiriakos,
    which version are you using ?
    please test this with reports 9i since PDF support
    has been enhanced there.
    to test i would suggest to run the report from rwclient
    as well and specify desformat=pdf and to a generate to
    file within builder to see if the same behavior occurs.
    if this problem reproduces there as well i suggest
    to contact oracle support to log the problem.
    regards,
    christian

  • How to open an PDF file from Java Application

    Hi
    I am developing a GUI application in java swing.
    on clicking one button, I want to open PDF file from my swing application.
    Is there any API through which I can achieve this?
    Tapan Maru
    Sun Certified Java Programmer

    Here's a way to do it (if I understand you
    correctly). Just let explorer.exe do it for you.
    import java.awt.*;
    public class openPDF
         Desktop desktop = Desktop.getDesktop();
         public openPDF()
              open("test.pdf");
         public void open(String path)
              try
                   Runtime.getRuntime().exec("explorer.exe "+path);
    } catch(Exception e) { System.out.println("NAI!
    I! ERROR!\n"+e); }
         public static void main(String[] args)
              openPDF myApplication = new openPDF();
    Why do you have a Desktop object as a member but instead of using it, you execute a command with Runtime (which is not platform independent!)???
    -Puce

  • Generating PDF file from PL/SQL

    Hello,
    I'm new using XML DB. I have XML data and a stylesheet stored into the database but i don't know how to generate PDF files.
    I' ve already tried to load Apache FOP into the DB and that's work very well. Is there any other solution using only Oracle's PL/SQL environment ???
    Thanks for your help.
    Lionel from Switzerland.

    can you provide the steps that you used to load fop into the database?
    which db version, and which fop version? When I tried to follow the cmsxdb load into a 10g instance I had numerous resolution errors.
    please help

  • When trying to generate pdf file from firefox 7.0.1 , getting corrupt content error, used to work with previous versions of firefox

    We have done toleration testing on firefox version 5 thru 6 and haven't got an issue with our website generating pdf files for our users. One of our users upgraded to firefox version 7.0.1 and they tried to generate a pdf report, now a screen pops up with Corrupted Content Error The page you are trying to view cannot be shown because an error in the data transmission was detected. I recreated this issue on my pc yesterday by installing firefox 7.0.1. Any hints as to what I need to look at would help. Cannot provide the url because it is a secure website for law enforcement. Thanks.

    You can turn off compatibility checking, but more and more of the Google Toolbar will not work. Google is no longer supporting the Google Toolbar so you should use the alternatives.
    Hi Mark,
    See http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
    If you have an aspect that is not covered, indicate what that is; otherwise, expect you to be fully functional within 1-2 weeks.
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • Need to generate PDF file from OAF with "n" number of fields

    Hi All,
    I have a requirement in OAF to generate PDF file with n number of fields in PDF output. PDF output could have some times 2 fields or 3 fields or 7 fields too in some condition and it will be based on one parameter. This output will be looks like below given scenarios:
    Example Scenario I
    Emp No | Emp Name | Dept No | Job |
    11 | Abc | 10 | MGR |
    Example Scenario II
    Emp No | Emp Name |
    11 | Abc |
    Please let me know if any one know how to go about it.
    Thanks in advance,
    Arvin
    Edited by: user636850 on Jan 26, 2011 6:11 AM

    Hi All,
    I have a requirement in OAF to generate PDF file with n number of fields in PDF output. PDF output could have some times 2 fields or 3 fields or 7 fields too in some condition and it will be based on one parameter. This output will be looks like below given scenarios:
    Example Scenario I
    Emp No | Emp Name | Dept No | Job |
    11 | Abc | 10 | MGR |
    Example Scenario II
    Emp No | Emp Name |
    11 | Abc |
    Please let me know if any one know how to go about it.
    Thanks in advance,
    Arvin
    Edited by: user636850 on Jan 26, 2011 6:11 AM

  • Generating pdf file from report

    I have one report showing electricity bill of number of consumers.
    I want to generate pdf file for each consumer while running above report .
    How to do?
    Wheather SRW.RUN_REPORT package will do it?

    Dear Arun,
    You are working in which environment C/S or Web?
    Regards,
    Senthil .A. Perumal.

  • Generate .PDF file from Oracle Form and print .pdf

    Hello, I am new to oracle form. I need direction on how to create .pdf file on a button click.
    The requirement is when user click a button on a form, I need to write some data to the pdf file and open the .pdf file for print.
    I am using Oracle Form builder 10.1.2.0.2
    Thanks a lot! Please help!

    Dear all,am new to oracle report and oracle forms and i know the
    basics how to generate the report and to create the form, Now my doubt is, like generating report
    from oracle report how to generate the report from oracle from,should i add any command button? and where
    to add the coding and what coding ? when i click that command button the report should be generated like oracle
    report,what should i do?Please help me to learn.
    my table name is 'student' and it has the following columns,
    sid,sname,grade,result.
    Am using oracle from 10.1.2.0.2 version and
    oracle report version is 10.1.2.0.2.
    Please give step by step procss.
    Thank you.

  • Unable to create PDF files from any application in any Acrobat version

    Hello, I am hoping someone can help me find a solution to a problem I am having creating PDF files.
    I have searched the Internet for a solution to this problem and can't find any information that helps me.
    I am running OSX 10.8.5 on a 2.5 GHZ Intel i5 Mac Laptop
    I cannot create PDFs from any program, Quark, Word, ect.
    When I try to print to the PDF printer, the printer pauses when it tries to open the Distiller. When I click resume, it pauses itself again.
    I have tried to save the document and create the PDF from within the distiller itself and get this error log:
    %%[ Error: undefined; OffendingCommand: MMXPR3 ]%%
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%
    I was originally using Acrobat 8, But I installed the trial version of Acrobat 11 and it has the same problem.
    The problem seems to be something to do with the distiller. I have a lot of Adobe software so I am trying to avoid a clean/re-install of Adobe software but will do it as a last resort.
    Thanks in advance for any suggestions.

    Hi，
    Besides pamma has suggested, here are similar issues, you can take a look at:
    http://unsolicitedbutoffered.blogspot.com/2014/01/quick-fix-volume-syntax-error-when.html
    http://crowdsupport.telstra.com.au/t5/T-Suite-Applications/There-was-an-error-opening-this-document-The-filename-directory/td-p/197425
    Best Regards,
    Lisa Chen
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Lisa Chen
    TechNet Community Support

Maybe you are looking for