Generic service issue-need to text value on drop down selection

Hello,
Below given is the problem scenario.
I have a dropdown box, on the selection of which values should be filled to the next drop down box.
It is working perfectly using generic service. When the second drop down box is selected, certain
values should be shown on the screen. But the values are not appearing on the display texts.
Let me know the possible causes.
Thanks,
Aravind

solved

Similar Messages

Dashboard prompt issue (Restricting Values in drop down) ????

Hi Friends,
In my report I have "days to start" column which list almost 10,000 values ranging from -1000 to 5000.
I need to create a prompt for this report on "Days to Start" column.
When I create a prompt on Days to start with Operator "Greater than" and Control "Drop Down List" it shows me all the values in Drop down.
I need only specific Values like 30, 60, 90, 180 which might not be in the "days to start" column.
If I select "SQL Result" what should be the SQL for that??
Is there any other way to solve this problem
Aprreciate your help on this
Thanks

You could make a table VALUES with 1 column and fill it with values like 30,60,90....then in sql you'd write SELECT * FROM VALUES....as simple as that
(of course, it'd have to be in RPD, and you'd need to expose it in Presentation layer)
Edited by: wildmight on Feb 19, 2009 8:18 AM
Also, you could try this - it works for me - but it could be slower and you might want to figure out how to round it - also, it has to be a number or cast to number format
SELECT Table."Column"/30 saw_0 FROM "Subj Area" ORDER BY saw_0
Edited by: wildmight on Feb 19, 2009 8:29 AM

How to get the values of drop downs, which are gonna create at run time.

As per my design requirement, I have to create drop downs in an ADF display table.
The no# of rows of the table are gonna decide the no# of the drop downs. User can select the values from drop downs. My issue is, how can I capture the selected values of those drop downs as those are gonna created run time.

Hi
ohh ,ok ,then as u said that u r storing twenty values ,thats y i aksed earlier ,are these form values part of tbale ,or as u said 20 values are there ,for these u r creating 20 form values ???.
My suggestion would be ,u do four calculation and put all your results in a hashmap ,and keep this hash map in to sesion ,using the following method
pageContext.putTransactionTransientValue("HashMapName",myHashMap);
and inside the PFR method when u want to display these values ,u can loop through your hashmap and can display these values.
like this
HasMap hm=pageContext.getTransactionTransientValue("HashMapName");
thanx
Pratap

Lost all the text in my drop down menus

All of a sudden I do not see any text in my drop down menus or on pop-ups. I tried to open Safari and got the pop up menu with a yellow triangle with a black exclamation point in it. It also had the three buttons at the bottom - one was blue - but no words.
I can open Firefox but not Safari. I can open the System Preferences widget but all I see are the icons, not the names of the choices. No matter what application is open I do not see any words in the dropdown menu.
First I tried zapping the PRAM. Didn't work. Then I booted from the startup disk and ran the disk repair utility, it repaired several things, but I'm still having the problem.
The font on my menu bar has changed too.
I installed x11 two days ago - not from the startup disk but from a website a friend helped me find when I didn't have my disk with me. I also installed Open Office. Should I uninstall those?
Is it possible I got a virus?? I have no clue how to deal with a virus on a Mac. I haven't had any trouble with my iBook since I got it in November 2005, and I don't know any tricks.

hi Rina!
my apologies, i'm guessing from your name that you might be from a non-english-speaking location ... if so, check to see if this is an issue for you (also see other posts in the thread):
Markus Eberhard, "iTunes 6: No music shows up in iTunes after upgrading" #12, 03:59pm Oct 18, 2005 CDT
... if i've gotten things horribly wrong, post back and we can try again.
love, b

Text elements in drop down box

Hi,
I am working on text elements in drop down box for service request application. I have a requirement that the display of text elements in PCUI should be in such a way that
depends on the role of the user. eg: for role 'X' some text elements should be displayed and role 'Y' remaining text elements should be displayed. In SAP GUI all text elements should be displayed. I copied MAC of text data to ZCL_CRM_BSP_AM_SLS_TM and tried to add the logic in methods IF_CRM_BSP_MODEL_ACCESS_IL~GET_ALLOWED_DDLB_VALUES
IF_CRM_BSP_MODEL_ACCESS_IL~FILL_DROPDOWN_LISTBOX
when i put external break point none of this methods are touched. Instead it goes to the methods of the class CL_CRM_BSP_TEXTMANAGEMENT_SC. This method is buried deep inside. Should i copy all the standard classes above this class and do the modification? Is there any other way? Any help is highly appreciated.
Kind Regards,
Charan

Hi Charan,
You have mentioned that in GUI all text elements have to be displayed. Why is it so?
If that's not the case then you can control it in PFCG authorizations. Object CRM_TXT_ID.
If you provide authorizations for a specific role for specific text ids only, the same would reflect in PCUI also. Others may not appear in the dropdown.
Please try.
Regards,
J.Prabananth

External XML data files to add values to drop down lists

I would like to have external XML data files to add values to drop down lists in my form.. But when i create a data connection it is working properly only in the Preview in Livecycle Designer.. but not in the PDF form(Adobe Reader). Moreover im not sure whether it will work in the form manager..!plzz help me!
Raghava Kumar V.S.S.

Hi,
For the case of raghavakumar, Is it really that I need to have LiveCycle Reader Extensions? Is there any other way that could do the same?
Thank you

Not able to set values in drop down for a table field

Hi All,
I am not able to set values in drop down for a table field. Although I am able to set these values to a stand alone field but its not happening for a particular table field. I am using ABAP web dynpro for coding.
Pls help.
Regards,
Bhaskar

Hi Otto,
Here is the code I am using:
* navigate from <CONTEXT> to <DATASOURCE> via lead selection
lo_nd_datasource = wd_context->get_child_node( name = wd_this->wdctx_datasource ).
* navigate from <DATASOURCE> to <CHANGING_PARAM> via lead selection
lo_nd_changing_param = lo_nd_datasource->get_child_node( name = wd_this->wdctx_changing_param ).
* navigate from <CHANGING_PARAM> to <EDUCATION_TAB> via lead selection
lo_nd_education_tab = lo_nd_changing_param->get_child_node( name = wd_this->wdctx_education_tab ).
node_info = lo_nd_education_tab->get_node_info( ).
REFRESH ddlb_value_set.
DATA: wa_edu_est TYPE t517t.
SELECT * FROM t517t INTO wa_edu_est WHERE sprsL = 'EN'.
    s_element-text = wa_edu_est-stext.
    s_element-value = wa_edu_est-slart.
    APPEND s_element TO ddlb_value_set.
ENDSELECT.
SORT ddlb_value_set BY text.
*    Set Value_sets to node_info
node_info->set_attribute_value_set(
     name      = 'EDU_EST'
     value_set = ddlb_value_set ).
Regards,
Bhaskar

Populating values to drop down list in Adobe Forms

Hi,
We have added a drop down list in our adobe form. Our requirement is Payment Terms should be displayed in this drop down list. We tried by adding values to drop down list in object palette window by using '+' sign. But now we want to display values dynamically from table T052U. We need to bring two fields ZTERM and TEXT1. We don't want to use database connection, just from a table as an importing parameter it should be appended to this list.
Atpresent, we don't want to use webdynpro or java for getting values.
Please provide suitable answers.

hi,
cretae simple type in data dictionary i don't have any idea to create simple type in adobe forms.
For creating Simple Type------in Dictionary->Local Dictionary->Data Type->Simple Type(here right click u get create simple type).and after that choose Enumaration Here u can add values
and create a node WITH one attribute and this attribute is off Type of that simple type u created in local dictionary and bind that node with interactive form data source property ,now in interactive form drag and drop that attribte from your dataView Run your application these values will populate in your Interactive form.
Regards
Trilochan

How to set default value for drop down box in jsf

Hi,
Can anyone help me to set the default value in drop down box using <af:selectManyChoice> ?
As I know there is an unselectedLabel attribute in <af:selectOneChoice> but not valid attribute for <af:selectManyChoice>.
Any help must be appreciated.
Regards,
AK

Hi Frank
My entity type is a List in managed bean. I have set the entityType in the constructor of the managed bean. I have attached my code here.
TPSearchCriteriaBean.java****************************************
/** Constructor */
public TPSearchCriteriaBean() {
super();
entityType=new ArrayList<String>();
entityType.add(UIConstants.LIST_ITEM_ALL);
authorizationType=new ArrayList<String>();
authorizationType.add(UIConstants.LIST_ITEM_ALL);
companyType=new ArrayList<String>();
companyType.add(UIConstants.LIST_ITEM_ALL);
mrgStatus=new ArrayList<String>();
mrgStatus.add(UIConstants.LIST_ITEM_ALL);
legalStatus=new ArrayList<String>();
setEntityType(entityType);
setAuthorizationType(authorizationType);
setCompanyType(companyType);
setMrgStatus(mrgStatus);
country = "0";
//address = new AddressBean();
UIConstants.java***********************************************************
public static final String LIST_ITEM_DEFAULT = "select";
public static final String LIST_ITEM_ALL = "0";
LOVManager.java*****************************************************************
public List<SelectItem> getLovList(String lovType, boolean requiredOption_SELECT, boolean requiredOption_ALL)
log.debug("LOV loading for " + lovType + ": START");
List<SelectItem> lovList = new ArrayList<SelectItem>();
//check validity of lov loading request
validLov:
for (int i = 0; i < lovTypeArray.length; i++)
if (lovTypeArray.equals(lovType))
break validLov;
log.debug("ERROR: LOV Type not valid.");
return lovList;
//First select is replaced by ALL here
//<-- Select --> should be an option
if (requiredOption_SELECT)
lovList.add(new SelectItem(UIConstants.LIST_ITEM_DEFAULT, "--Select--"));
LOVDao dao = new LOVDao();
dao.loadLOVValues(lovType, lovList);
log.debug("LOV Loading successful!");
//<ALL> should be an option
if (requiredOption_ALL)
lovList.add(new SelectItem( UIConstants.LIST_ITEM_ALL, "ALL"));
return lovList;
Kindly help me.
Regards,
AK

How to set a default value in a Value Help Drop Down List

Hi,
I used an age Range field in my adobe form, the control is a Value Help Drop Down List. i am populating the drop down using following code.
IWDAttributeInfo ageInfo = wdContext.nodePersonalData().getNodeInfo().getAttribute("CTAgeRange");
     ISimpleTypeModifiable ageType = ageInfo.getModifiableSimpleType();
     IModifiableSimpleValueSet ageValueSet = ageType.getSVServices().getModifiableSimpleValueSet();
     ageValueSet.put("1","21-29");
     ageValueSet.put("2","30-34");
     ageValueSet.put("3","35 or Above");
My requirement is to set a default value e.g. 30-34 in the age range field.
I want to give input to iform from my Implementation code only.
Please help.
Thanks in advance

hi Ranjan,
that means you have to set at design time,
to set default drop down value you will have to set the value for particular attribute (which is linked to the dropdown element) in the context
like
wdContext.currentContext<nodeName>Element.set<FieldName>(<default value>)
This generally done in Initialization method of the controller.

How to capture selected value from drop down by index

Dear friends,
i want to capture the value of select value from drop down by index, for eg if select air france, how to capture , could any one please let me know
Thanks
Vijaya

Hi Vijaya,
You can get the value of selected from drop down as below
Check out the event handler method attached to Onselect event of the ui element drop down by index , if no event is associated, then create an event and attach to the drop down list
Now you will be having the CONTEXT_ELEMENT in the WDEVENT parameter
               data lo_element type ref to if_wd_context_element.
               lo_element = wdevent->get_context_element( name = 'CONTEXT_ELEMENT').
Now, you can get the static attribute value of selected drop down value & let us say your drop down list values are populated from context node 'ND_DRP_DOWN'
               data ls_data type wd_this->element_nd_drp_down.
                         lo_element->get_static_attributes(
                                   importing
                                   static_attributes = ls_data ).
Hope this helps you.
Regards,
Rama

Allow Custom Text Entry for Drop down not working For Dynamic form

Dear All,
In drop down field Allow custom text entry is working fine if the form is save as a static pdf form file.But if the form is save as a Dynamic pdf form file it is not working.I can enter custom text in drop down field but after filling it up when I click on next field the text from the drop down is disappearing.
If any body can please help me to solve this problem.
Thanks a lot in advance
Regards
Rakesh

Dear Jimmypham,
Thanks a lot for your quick response.But it's not working for me.I have even tried with a form having only single field and save it as a dynamic pdf file.In that form also it's not working.The text which I have entered is disappearing when I click outside of this field.
Can you please help me to find out the solution for this problem.
Regards
Rakesh

I have made one field as drop down in web ui. there are 3 values in drop down suppose a, b , c.

i have made one field as drop down in web ui. there are 3 values in drop down suppose a, b , c.
now i want to make c value as default value in drop down what to do?

Hello Bala,
you can find number of discussions regarding this on SCN.
Search and do code in DO_INIT_CONTEXT method of view to set the value in entity.
lr_entity ?= me->typed_context->context_node_name->collection_wrapper->get_current( ).
lr_entity->set_property( iv_attr_name = 'Attribute_name' iv_value = 'value' ).
Regards Harish Kumar

Is it possible to customise the text within the drop down boxes. ie attributes in online shop

Is it possible to customise the text colour and size within the drop down boxes. ie. in the drop down created for attributes in online shops
In the drop down, the font is black and bigger than I'd like it. I want it grey. How can I customise the text inside these drop downs?

Hi Liam,
Please refer to this link: http://zahir.businesscatalyst.com/view-all/pom-pom-short#.UeZcwY1xTjY
Should the class be applied to the actual tag within the 'Shop Product Large' customised layout?

How to add values to drop down list in adobe forms

how to add values to drop down list in adobe forms

Hi,
If you are using WD Java following are steps of filling values in DD Box:
1 Create a simple type in the Dictionary.
2 Create an attribute "CountryNew" in the Context of type created by you.
3 Write following code in the init method of the form:
IWDAttributeInfo countryinfo =
wdContext.nodeEmployee().getNodeInfo().getAttribute("CountryNew");
ISimpleTypeModifiable Country = countryinfo.getModifiableSimpleType();
IModifiableSimpleValueSet countryValueSet =
Country.getSVServices().getModifiableSimpleValueSet();
countryValueSet.put("IN", "INDIA");
countryValueSet.put("US "USA");
4 Add a Enumrated DD box in the form and bind it to the attribute "CountryNew"
Hope this helps
Amit

Generic service issue-need to text value on drop down selection

Similar Messages

Maybe you are looking for