Gentoo installation: error while loading shared libraries
Hello,
I am trying to install Free JSP editor on Gentoo with 2.6 kernel. I get errors about loading shared libaries (full output below). I am almost sure that it is caused by LD_ASSUME_KERNEL=2.2.5 in install script but i dunno how to prevent it from exporting this variable? If i try to 'hack' it i do not get correct checksum and installation exits.
Preparing to install...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/opt/sun-jdk-1.4.2.07/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Try changing LD_ASSUME_KERNEL inside the installer binary to something else (LD_ASUSME_KERNEL for example) by using some binary editor.
Similar Messages
-
R12 installation giving me error [while loading shared libraries: librt.so]
Hello ..
I am installing Fresh R12 installation on Fedora. I was doing Single node installation. Installation was going fine but at the point when it said run "autoconfig.sh" for APPS_TIER. I went to $INST_TOP/admin/scripts and ran "autoconfig.sh". After that installer showed me all the errors and when i try to see the log file.
I am getting following errors.
[oracle@aurie / ]$ ls
ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
[oracle@aurie / ]$ su - root
su: error while loading shared libraries: libcrypt.so.1: cannot open shared object file: No such file or directory
Now, I cant do anything on this machine, I try rebooting it but no matter what command i try to run i am getting above error.
Cant find any solution online.
any help would be appreciated.
ThanksHello Hussein,
I chnaged my Fedora to following ..
[root@aurie /]# cat /etc/issue
Red Hat Enterprise Linux Server release 5 (Tikanga)
Kernel \r on an \m
[root@aurie /]# cat /proc/version
Linux version 2.6.18-8.el5 ([email protected]) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Fri Jan 26 14:15:21 EST 2007
But installer is failing at the end of DB installation and it is not able to create database
==== ApplyDatabase_05092341.log ===========
Executable : /d01/oracle/VIS/db/tech_st/11.1.0/bin/sqlplus
The log information will be written to
/d01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_aurie/adcrdb_VIS.txt
Creating the control file for VIS_aurie database ...
exit_code=127
Checking for errors ...
.end std out.
***sqlplus: error while loading shared libraries: libclntsh.so.11.1: cannot open shared object file: No such file or directory***
***egrep: /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_aurie/adcrdb_VIS.txt: No such file or directory***
**.end err out.**
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
=============
============05092156.log============
Processing Disk68....
^M
runProcess_2
Statusstring Registering Database
Executing command: /R12_setup/startCD/Disk1/rapidwiz/jre/Linux/1.6.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /R12_setup/startCD/Disk1/rapidwiz/jlib/java:/R12_setup/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/VIS_aurie.xml -stage /R12_setup/startCD/Disk1/rapidwiz -showProgress -phase reg -nopromptmsg
Log file located at /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_aurie/ApplyDatabase_05092341.log
^M
| 0% completed
runProcess_3
Statusstring Configuring Database
Executing command: /R12_setup/startCD/Disk1/rapidwiz/jre/Linux/1.6.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /R12_setup/startCD/Disk1/rapidwiz/jlib/java:/R12_setup/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/VIS_aurie.xml -stage /R12_setup/startCD/Disk1/rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_aurie/ApplyDatabase_05092342.log
^M
| 0% completed ^M
/ 0% completed ^M
- 0% completed ^M
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Processing DriverFile = /R12_setup/startCD/Disk1/rapidwiz/template/adridb.drv
Running Instantiation Drivers for /R12_setup/startCD/Disk1/rapidwiz/template/adridb.drv
instantiate file:
source : /R12_setup/startCD/Disk1/rapidwiz/template/adrun11g.sh
dest : /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrun11g.sh
backup : /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrun11g.sh to /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/VIS_aurie/templbac/adrun11g.sh
setting permissions: 755
setting ownership: oracle:dba
instantiate file:
source : /R12_setup/startCD/Disk1/rapidwiz/template/adrundb.sh
dest : /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh
backup : /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh to /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/VIS_aurie/templbac/adrundb.sh
setting permissions: 755
setting ownership: oracle:dba
Step 0 of 5
Command: /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrun11g.sh
Step 1 of 5: Doing UNIX preprocessing
Processing Step 1 of 5
Step 1 of 5
Command: /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh
Step 2 of 5: Doing UNIX preprocessing
Processing Step 2 of 5
Executing: /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh
STARTED INSTALL PHASE : DATABASE : Sun May 10 09:33:17 PDT 2009
Preparing environment to install databases ...
Setting LD_LIBRARY_PATH to - /R12_setup/startCD/Disk1/rapidwiz/lib/Linux -
Setting PATH to - /R12_setup/startCD/Disk1/rapidwiz/jlib/java:/R12_setup/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
Setting CLASSPATH to - /R12_setup/startCD/Disk1/rapidwiz/jlib/java:/R12_setup/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
... installing VISION demo database
FINISHED INSTALL PHASE : DATABASE : Sun May 10 09:33:18 PDT 2009
/d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh has succeeded
=============
Now, I am again hitting the same issue .. whatever I try to do after this fail installation i am getting following
*[oracle@aurie 11.1.0]$ ls*
ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
*[oracle@aurie 11.1.0]$ cat /etc/issue*
cat: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
*[oracle@aurie 11.1.0]$ cd /*
*[oracle@aurie /]$ ls*
ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory -
While booting linux VM getting error "error while loading shared libraries
Hi Expert,
while booting Oracle linux Virtual Machine getting error "error while loading shared libraries: libpopt.so.0 cannot open shared object file" no such file or directory
Now i am unable to boot linux, any help appreciated.
Note: Its Oracle Linux 5.8 x86_64 under Oracle VirtualBox
Edited by: IgnitedMind on Apr 30, 2013 7:12 AM
Edited by: IgnitedMind on May 1, 2013 12:04 AM
Edited by: IgnitedMind on May 1, 2013 12:06 AMWithout knowing what you have installed or what modifications you have done it is not possible to say what goes wrong. Like I previously mentioned, you may have installed an incompatible version of a core system library. Sorry, I'm not going to read any installation manual to find out what you might have done wrong. You may need to reinstall the complete system or just the popt installation package.
Based on my experience people sometimes seem to misunderstanding the concept of software version requirements, which are always minimum version requirements and does not mean, for instance, software made for gcc 4.1.10 does not work under 4.1.12. You cannot simply upgrade or downgrade core system libraries without affecting the installed system. Using YUM to install software will check this and prevent you from breaking your system. RPM does not check any dependencies and hence can break your system beyond repair. -
Hi,
I installed Oracle 10g on RHLinux AS4. I created a initOEMREP.ora file
in $ORACLE_HOME/dbs.
my .bash_profile file is,
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
#Added on 05-feb-2008
#For oracle1g db installation
export ORACLE_SID=OEMREP
export ORACLE_BASE=/home/app/oracle10gdb
export ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1
export PATH=$ORACLE_HOME/bin:$PATH:.
export LD_LIBRARY_KERNEL=$ORACLE_HOME/lib
export TNS_ADMIN=$ORACLE_HOME/network/admin
export TMP=/home/tmp
export TMPDIR=/home/tmp
While
$sqlplus "/as sysdba"
I am getting
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Feb 6 21:27:08 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
oracleorcl: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
Please help me to solve this.
Regards,
MathewHi,
THank you for the replay. Where will I get this package?
Regards,
Mathew. -
I got the following error
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.4681/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Tuxedo 9.1 base installation complete
when tried to install Tuxedo 9.1 on unbreakable Linux 5. I am trying to install Peoplesoft.
I found this error is pretty common, not necessary appear when installing Tuxedo. I am searching around and a lot of people saying to comment out the line
export LD_ASSUME_KERNEL
The problem is I don't know which in which file I need to do it. Has anyone have the encountered the similar problem before? Thanks.After reading the installation script, I figure out which is the evil file. I just post it here so if someone get into this problem in the future, he can fix it.
Here is the solution:
Assume you are at the directory where the install.sh is. Do the following:
-bash-3.1$ cd linux/sles9/base
-bash-3.1$ cp tuxedo91_32_SLES_9_x86.bin tuxedo91_32_SLES_9_x86.bin.bak
-bash-3.1$ cat tuxedo91_32_SLES_9_x86.bin.bak | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" >tuxedo91_32_SLES_9_x86.bin
-bash: tuxedo91_32_SLES_9_x86.bin: Permission denied
-bash-3.1$ cat tuxedo91_32_SLES_9_x86.bin.bak | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" >tuxedo91_32_SLES_9_x86.bin
Then run the installation script
sh install.sh and be happy as I am now!!!! -
Ops center 12c installation last stage we are getting below error :
INFO: starting new satellite SMF services
satadm: Enable HTML redirect
satadm: Disabling application/scn/ec-server-splashpage
/opt/sun/xvmoc/bin/svcadm: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
satadm: ERROR: application/scn/ec-server-splashpage failed to stop
satadm: Starting Enterprise Controller with SMFlite...
svcadm: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
satadm: ERROR: Error enabling Enterprise Controller run-time milestone svc:/application/scn/satellite-enable:default (rc=127)
Error: starting satellite services
Command: /opt/sun/xvmoc/bin/satadm start -v -w
Exit code: 1
Output:
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.14112.
t. Try this step again (correct the failure before proceeding)
x. ExitHi Valentin
The copy error occurs when you try to copy the files to the main OS that has allocated the VM ?
Because another option is to get those files toward the VM across and ftp server. You could use
an ftp server installed in the main machine or in the network where you are connected o inclusive from
your mail if you have connection to internet.
Joel Perez
Oracle Ace Member
DBA Oracle -
Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AMa step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed. -
Error while loading shared libraries libQtGui.so.4
I was "fixing" TeamSpeak 3 shortcut today, and I don't know why I logged on as root and copied all the libs from TS directory to /usr/lib. Apparently, there was libQtGui.so.4, and I have overwritten the "original".
Now my KDE (latest from repos) won't start with the message "error while loading shared libraries libqtgui.so.4" and "kdeinit4 cannot start: check your installation".
I have tried reinstalling KDE, but that didn't fix anything...
Any suggestions? Tnx in advance.
Neky
Last edited by Neky (2010-05-18 21:25:59)reinstall QT and it's fixed.
-
Error while loading shared libraries: libpng12.so.0
Am trying to install Rockbox installer. After running the app, I get the following error:
error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory
I have already installed libpng12 earlier this month for another application through AUR and that worked fine.
Where do I start?
thanksRockBox is an aur package? Does the aur package compile it from source? If it does, you should just be able to recompile. If its doing something funny and trying to download a prebuilt binary you may be out of luck on that one. The libpng12 package from AUR is installed on your system?
-
So, I have a sligtly old computer that I use web browsers like midori on, because they are good for slow computers. Whenever I launch dwb or midori or luakit from the launcher in the Gnome shell, nothing happends. When launching from the terminal (dwb here, it happens for all three) I get:
dwb: error while loading shared libraries: /usr/lib/libwebkitgtk-1.0.so.0: file too short
and when installing packages I get:
ldconfig: File /usr/lib/libjavascriptcoregtk-1.0.so is empty, not checked.
ldconfig: File /usr/lib/libjavascriptcoregtk-1.0.so.0.16.10 is empty, not checked.
ldconfig: File /usr/lib/libtotem.so.0 is empty, not checked.
ldconfig: File /usr/lib/libxvidcore.so.4.3 is empty, not checked.
ldconfig: File /usr/lib/libwebkitgtk-1.0.so.0.22.8 is empty, not checked.
ldconfig: File /usr/lib/libjavascriptcoregtk-1.0.so.0 is empty, not checked.
ldconfig: File /usr/lib/libxvidcore.so is empty, not checked.
ldconfig: File /usr/lib/libxvidcore.so.4 is empty, not checked.
ldconfig: File /usr/lib/libtotem.so.0.0.0 is empty, not checked.
ldconfig: File /usr/lib/libwebkitgtk-1.0.so.0 is empty, not checked.
ldconfig: File /usr/lib/libtotem.so is empty, not checked.
ldconfig: File /usr/lib/libwebkitgtk-1.0.so is empty, not checked.
The package installs, and then this prints out.
What can I do to fix it?
Note: this happened after a system update
Last edited by dubble (2014-06-04 20:42:09)Alright, I read the thread and preformed
sudo pacman -Syyf <all packages updated>
but the option wasn't found (-f)
so i did
sudo pacman -Syyu <all packages updated>
and it spit out several hundered lines consisting of:
webkitgtk2: /usr/share/webkitgtk-1.0/images/panIcon.png exists in filesystem
except with different packages and files
help? -
Hi,
I'm trying to install SRM-MDM Catalog 2.0 under SUSE_LINUX Enterprise Server 10 (x86_64).
First to all I'm trying to install Server part. So I navigate under the CD installation: /Master_Data_Server/LINUX_X64/MDM/bin/ and then execute ./mds-r.
The following error appears: error while loading shared libraries: libxerces-c.so.26: cannot open shared object file: No such file or directory.
libxerces-c.so.26 is located under /Master_Data_Server/LINUX_X64/MDM/lib/
Could you please help me?
Thanks in advance!Thanks for your comment Shiv, Yes I know that MDM 5.5 is out of standard maintainence but anyway our business scenario requires SRM-MDM 2.0.
If anyone finds the same error I mentioned, It has been solved using ldconfig -v in the library directory of choice.
I'd like to ask another issue: Right now We have the following error after executing ./mdis-r or ./mds-r:
Could not open language resource file "LangStrings/ImportManagerCommon.lang". Try setting the MDM_HOME environment variable.
Could you please help me how to do if?
Thanks in advance,
Edited by: Guillermo Montes on May 5, 2010 4:21 PM
Edited by: Guillermo Montes on May 5, 2010 4:22 PM -
Error while loading shared libraries libnnz10.so with brconnect
Hi
I am experiencing some problems within an installation, brconnect seems to be looking for oracle 10 libraries? while my oracle is a 9.2 !
these are the logs:
ERROR CJS-00288 Could not update database statistics.<br>DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPXID returned 127.<br>SOLUTION: See brconnect.log for details.
brconnect.log:
Execution of the command "/sapmnt/XIE/exe/brconnect -u / -c -f crsyn -o SAPXID" finished with return code 127. Output:
/sapmnt/XIE/exe/brconnect: error while loading shared libraries: libnnz10.so: cannot open shared object file: No such file or directory
Yes, that's true, libnnz10.so does not exist, it happened something similar with the library libclntsh.so.10.1, I only have a libclntsh.so, with a softlink from libclntsh.so.9.
maybe the brtools imagine I have an oracle 10?
I specified a 9.2 Oracle during the installation!
Many thanks, Mario.>
Tecnica de Sistemas wrote:
> I am experiencing some problems within an installation, brconnect seems to be looking for oracle 10 libraries? while my oracle is a 9.2 !
> [...]
> I specified a 9.2 Oracle during the installation!
Installation of what?
Clearly the BRTOOLS are version 700, so, even when you specified that Oracle 9i was to be installed the BRTOOLS delivered are the mentioned version and you
must install the oracle 10g instant client or
replace the version 700 by version 640
Regards -
Error while loading shared libraries: libgij.so.7rh
Hi everyone,
I just installed jdk1.6.0_06 on red hat linux 5 server, and try to run a simply java class but have the following error message:
java: error while loading shared libraries: libgij.so.7rh: cannot open shared object file: No such file or directory
I have added the following into /etc/profile
export JAVA_HOME=/usr/java/jdk1.6.0_06
export PATH=$PATH:$JAVA_HOME/bin:$JAVA_HOME/jre/bin
export CLASSPATH=.:$JAVA_HOME/lib:$JAVA_HOME/jre/lib:$CLASSPATH
Can you kindly indicate the cause for this issue? Thanks a lot.
Best,
VovoTsaiYou have GNU Java installed by default on many Linux distributions and this is being picked up ahead of the Sun Java. You can change the PATH declaration to make sure that the Sun Java is found first.
export PATH=$JAVA_HOME/bin:$JAVA_HOME/jre/bin:$PATHI have removed GNU Java from all my Linux installations. -
Error while loading shared libraries: libclntsh.so.10.1
Hi,
I have installed R12 on Oracle EL 5.
AT the end during system check details,the check "database availability" shows passed, but when I checked log it says the following error at one point.
Executable : /apps/tools/oracle/VIS/apps/tech_st/10.1.2/bin/sqlplus
riwTDBup.sh exiting with status 0
sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Can you please let me know whether this is going to be a problem or not. If yes, how I can rectify this.
I could connect to DB using sqlplus without any issues.
Thanks
Vas
Complete message from "Database availability"
Database Availability
command: /diskb/orainstall/StageR12/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /apps/tools/oracle/VIS/db/tech_st/10.2.0/VIS_home.env APPS/APPS
riwTDBup.sh started at Sun Jul 1 09:14:04 PDT 2007
Parameters passed are : /apps/tools/oracle/VIS/db/tech_st/10.2.0/VIS_home.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /apps/tools/oracle/VIS/db/tech_st/10.2.0
ORACLE_SID : VIS
TWO_TASK :
PATH : /apps/tools/oracle/VIS/db/tech_st/10.2.0/perl/bin:/apps/tools/oracle/VIS/db/tech_st/10.2.0/bin:/usr/bin:/usr/sbin:/apps/tools/oracle/VIS/db/tech_st/10.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/diskb/orainstall/StageR12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
LD_LIBRARY_PATH : /apps/tools/oracle/VIS/db/tech_st/10.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/apps/tools/oracle/VIS/db/tech_st/10.2.0/lib:/usr/dt/lib:/apps/tools/oracle/VIS/db/tech_st/10.2.0/ctx/lib
Executable : /apps/tools/oracle/VIS/db/tech_st/10.2.0/bin/sqlplus
riwTDBup.sh exiting with status 0
Database ORACLE_HOME connection test has succeeded
command: /diskb/orainstall/StageR12/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /apps/tools/oracle/VIS/inst/apps/VIS_home/ora/10.1.2/VIS_home.env APPS/APPS
riwTDBup.sh started at Sun Jul 1 09:14:05 PDT 2007
Parameters passed are : /apps/tools/oracle/VIS/inst/apps/VIS_home/ora/10.1.2/VIS_home.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /apps/tools/oracle/VIS/apps/tech_st/10.1.2
ORACLE_SID :
TWO_TASK : VIS
PATH : /apps/tools/oracle/VIS/apps/tech_st/10.1.2/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/diskb/orainstall/StageR12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
LD_LIBRARY_PATH : /apps/tools/oracle/VIS/apps/tech_st/10.1.2/lib32:/apps/tools/oracle/VIS/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/apps/tools/oracle/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386:/apps/tools/oracle/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/apps/tools/oracle/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads
Executable : /apps/tools/oracle/VIS/apps/tech_st/10.1.2/bin/sqlplus
riwTDBup.sh exiting with status 0
sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Apps ORACLE_HOME connection test has succeeded
nullDo an su - oracle and see if you can execute any commands. If you cannot, as root, vi /home/oracle/.profile and remove any LD_ASSUME_KERNEL references.
Also note that R12 is not certified for OL 5 or RH 5.
Oracle Applications Installation and Upgrade Notes Release 12 (12.0) for Linux (64-bit)
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416305.1
Oracle Applications Installation and Upgrade Notes Release 12 (12.0) for Linux (32-bit)
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=402310.1 -
Unable to install JRun on Linux receive error while loading shared libraries
I'm installing JRun trial version on Ubuntu with java version
"1.6.0_07". I receive the following errors when I install:
guest:~/Desktop$ sh ./jrun-40-linux-en.bin -i gui
Preparing to install...
Extracting the installation resources from the installer
archive...
Configuring the installer for this system's environment...
dirname: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1:
cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
Launching installer...
rm: error while loading shared libraries: libc.so.6: cannot
open shared object file: No such file or directory
rm: error while loading shared libraries: libc.so.6: cannot
open shared object file: No such file or directoryI get that error too when try to install Jrun 4.0 on Open
Suse 11.0, Can anyone show me how to solve that problem.
Maybe you are looking for
-
Inconsistent Mac Availability on Network
Have a situation where my primary Mac (iMac) is inconsistently available to other macs and devices on the network. Screen sharing and File sharing are on in the Sharing preferences. Typically after a reboot is when things work the best, but it doesn'
-
How do I branch to a dynamic page on the App Server
I have a dynamic page that is a menu that is dynamically generated based on what choice was selected from a higher level menu that is a portlet on the front page of our site (Application Server based). This menu calls up application code, currently a
-
Pls explain how to add standard text in sapscript & smartforms
Dear friends, pls explain how to implement standard text into sap script and smartforms. in how many we can do. and what is diff between include text & text modules in smartforms. how we can translate into multiple languages. Regards Jagadeeshwar.B
-
How to check file name in local c drive and run exe file
Hi All, I'm newbie user in action script. How can i check sepecific file name in local c:\ drive and if file doesn't exist in local drive download from server and run and if exist go to frame ..... . Please help to me. Thanks,
-
Object does not existis in applicant number
Hi, While ubdating the infotype 0024 to the applicant. i m getting the error object does not exists in applicant number. Pls let me know how to solve this issue. Thanks and Regards, Revathi.