Get a specific cluster out of a datalog file

HI!
I'm saving a cluster with controls (boolean, dbl, u32...) into a datalog file. For several different settings of the controls I'm saving the clusters consecutively in to the file. Is there a way to directly access a certain position at the file, in order to instantly read this position without going thru the hole file with a while loop? If I want to replace a certain position with a changed cluster is there a way to do it directly?

Random access for reading is very easy to do, simply wire up the position terminal on the Read VI. Random access for writing is unfortunately not so simple. LabVIEW won't do it for you, and while you might be able to figure it out with a lot of file manipulation (using binary access to the file rather than datalog) it would be a really big pain. If you are looking to do these types of things then you might be better off using a more robust file storage method such as the Storage VIs (7.1 only).
Regards,
Ryan K.

Similar Messages

How to print specific pages out of a book file

I've searched around but I cannot find any way of printing specific pages out of a book file. Has anyone got any ideas? I have a 100 page book file with 20 files, and doing print outs of sections is a nightmare. I want to be able to print page 5 out of file A and page 6 out of file B together so I can duplex them. I've tried scripting this but I can't seem to set the page range of the print preferences of the book file.

[Jongware] wrote:
I don't think it's possible to set the page range of a Book.printPreferences
Theoretically it ought to be possible. Can't test for myself now; what does happen when you set the pageRange to overlapping sub-files?
I've just tried it with CS3. It might have been implemented in later versions.
In the print Book dialogue the page range field is disabled. You cannot enter anything there.
If you try to do it with a script it says that printPreferences is read only.

How do I get firefox to write out homepages to pdf-files correctly

2011-08-22
I have been using Firefox for many years now. I like this browser better than Safari. However. I have a problem when I have connected to a homepage over the web and want to write the content out to a pfd-file. The pdf-file does sometimes contain only one page. The material is good enough for two or more pages of output. I have checked that using Safari browser. I´d like to continue using Firefox so please tell med what to do!
Göran Stille
[email protected]
Computer Mac Powerbook G4
Processor 1.67 GHz PowerPC G4
Operative system OSX 10.5.8
Firefox version 3.6.2

"Google" is a search engine (website) and NOT (repeat: NOT) a PDF viewer. It can't and won't open PDFs in any real or imaginable way.
Firefox added their own proprietary PDF viewer with version 20 - they're on 21 now. I'll be the first to admit "it sucks". You CAN'T fill in PDF forms with it, and you can't email them from the page like with Opera, Safari or Chrome (which use the reader plug-in still).
Unfortunately, the ONLY option you have now that they've added it and killed the ability for the Reader plug-in to work with Firefox, is Tools>Options>Applications - select Portable Document Format(PDF) and choose "Use Adobe Reader (Default)". What that will do is FORCE Firefox to download the PDF instead of opening it in their terrible PDF viewer in the browser window.
Or... use one of the other browsers I mentioned. They're all free.

Getting session has timed out while trying to redeem a gift card. have had no problem in the past. am running a g4 since 2002 with os 10.4 and itunes 9. have no internet problems and can connect to store ok. so far apple no help keeps blaming it on othrs

am having trouble for the first time trying to redeem a gift card. Everything same on computer, OS, and internet connection. have been able to redeem other cards. this time am getting "SESSION HAS TIMED OUT" while trying to redeem card. have contacted apple and checked out all their suggestion iE:( must be your connection. typed in code wrong, too old version of itunes, etc) anything but why would a gift card code bee tied to a specific vetrsion of ITUNES. Rediculous!! there has to be others out there that have an older version if itune than i have. has anyone ever had the error "SESSION HAS TIMED OUT" and if so was it corrected?? any information other than apples {change password and give us lots of personal info they probably have) would be appreciated..

Hello,
As far as I can see, that Verizon Jet Pack wireless Modem uses WPA2 to connect.
The Router might complicate things right now.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

How to get the specific filename

Hi..
I want to get the specific file where the filename contains current date like "asd.11.20051226.03.dat". Then, i want to write the filename to a text file.
Now, i only know how to get the list of file in a specific directory& write the whole list to a text file. How to filter the list of filename because they have "dot" in their name?

To determine if a string contains a dot:I have a feeling that about 10 seconds after he figures out whether the filename contains a dot he's going to need to look a little deeper to determine whether he found wakka.wrongfile.txt or 11.20.1980.the.file.hes.looking.for.data. Maybe?

Can not get a specific website to load in either Safari or Firefox?

Can not get a specific website to load in either Safari or Firefox on my MacBook Pro. Website loads on other devices such as iPhone, PC, etc. I've tried emptying the Cache in Safari. Any other suggestions?

The problem I am having is that this website will not load on my MacBook Pro. I don't know if it has something to do with the fact that the website was created on this computer using iWeb and then I had to change to a different webhost on July 1st (Dreamhost) when Apple discontinued Mobile Me / Webhosting as of July 1st. That is when I was no longer able to load the site on this one computer.
I get this message with Safari:
Safari can’t open the page “http://www.challengefitnesscrossfit.com/” because the server where this page is located isn’t responding.
and this message from Firefox:
The connection has timed out
The server at www.challengefitnesscrossfit.com is taking too long to respond.

Tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery

tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery for two ouers. After the internet recovery the same problem with reinstalling OSX message

Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev

I am trying to buy songs on itunes and half way through the terms and conditions come up, I accept them and press return and then I get a 'session timed out' notice and the sale hasn't gone through - tried loads of times / updating software, any answers?

I am trying to buy songs on itunes and half way through the terms and conditions come up, I accept them and press return and then I get a 'session timed out' notice and the sale hasn't gone through - tried loads of times / updating software, any answers?

I am trying to buy songs on itunes and half way through the terms and conditions come up, I accept them and press return and then I get a 'session timed out' notice and the sale hasn't gone through - tried loads of times / updating software, any answers?

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

Whether you can redownload music depends upon what country that you in. If you are using your computer's iTunes then does music show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (on your phone you might be able to redownload media via the Purchased tab in the iTunes store app) ? If music shows there, but not that album, then check to see if it's hidden : http://support.apple.com/kb/HT4919
If you aren't in a country when you can redownload music and it's still on your phone then you should be able to copy it over from the phone via File > Devices > Transfer Purchases.

How do i get credit card info out of app store on phone

I bought my son an app now i want to get my card info out so he can not continue buying apss??

You can disable purchases in Restrictions on the phone, requiring a password to do so.
You can buy an iTunes card for a predetermined amount.
You can log into iTunes on your computer and change your billing information.

How can I get my old memory out to upgrade? one seems to be frozen

I am trying to upgrade my iMac. I have ordered the upgrade but am having trouble getting the old memory card out (one came out pretty easily, but the other won't move). Also when I inserted the new memory card in the one that would come out, it didn't seem to go in as far as the one that had come out. I had to just put the old card back in. Help!

Here are the complete specs for your iMac:
http://www.everymac.com/systems/apple/imac/stats/imac-core-2-extreme-2.8-24-inch -aluminum-specs.html
Now, I've never heard of Axiom, but that does not necessarily mean anything; however, what does is that iMacs are known to be extremely finicky about the RAM. The brands usually recommended here are either Crucial or OWC (macsales.com) - this would be the RAM you'd need from them:
http://eshop.macsales.com/shop/apple/memory/iMac/Intel_Core_2_Duo
As for getting the old stick out, if you can't manage it, I would make an appointment at your nearest Genius Bar and ask them to check out the slot (this is free). Also check on why you can't put the new stick in all the way - it may just be that you're not pushing hard enough, it does require quite a push. If the Genius can't seat the RAM correctly, I'd say there is a problem with the RAM and I'd return it.

How can I get 300 dpi tifs out of webex stills & then worked on in adobe illustrator?

How can I get 300 dpi tifs out of webex stills & then worked on in adobe illustrator?
I have been trying to convert images created in webex and transferred to illustrator into 300 dpi tifs. They download as ucf's when generated on white board. Or I have to upload files from other webex participants coming in at 72 dpi, converting them to something bigger in photoshop to paint in before taking them back into the webex session as a doc that then gets worked on further during the session. Later they go into illustrator for some more work with vectors. That's fine for the web but now a publisher wants them as 300 dpi tifs and I can only get things back & forth as 72 dpi pdf's. If I try to bump them up with a resample, they come out teensy weensy. What am I missing and is there any way to make them look good?

What I need is to be able to transfer the images between formats without degradation of the resolution and find ways to sharpen what I have even if I can't increase pixels. If the original I'm delivered is a 96 dpi power point slide, for example, that's what I have to work with, I'm using Illustrator to compensate with vectors. But then I still need to get it back to a 300 dpi tiff to meet the specs.

How do I get my iPhone 5c out of black screen recovery mode?

I have been trying for countless hours and days to get my iPhone 5c out of recovery mode (black screen no apple logo or anything else) the only reason I know it turns on is because the backlight LCD changes color. When I press down on it it leaves a little finger pressure thing. I have tried all of the ways to get it out of DFU mode, Out of Recovery Mode, I have tried restoring it, in which case i get the error 4005,40013 etc. So now I have come here for my last hoorah on trying to get this pile out of recovery mode and the IOS installed and working.
I don't know if this matters or not but, I have recently purchased a screen from ebay, it was an original iPhone screen etc. I have replaced it and as i said the screen works fine. that shouldn't have any problem with the actual software malfunctioning to update, but here is the log! Enjoy!
All help is greatly appreciated and I will do my best to give credit where it is deserved in the future! God Bless!
2014-07-08 23:05:05.000 iTunes[796:707]: restore library built Jan 31 2014 at 16:40:15
2014-07-08 23:05:05.000 iTunes[796:707]: iTunes: iTunes 11.2.2
2014-07-08 23:05:05.000 iTunes[796:707]: iTunes: Software payload version: 11D257 (option key)
2014-07-08 23:05:05.000 iTunes[796:707]: iTunes: Using MobileRestore state machine
[23:05:52.8450] Successfully applied power assertion
[23:05:52.8454] Changing state from 'Idle' to 'Restoring'
[23:05:52.8692] amai: AMAuthInstallSsoInitialize: can't find SSOClient.framework
[23:05:52.8695] requested restore behavior: Erase
[23:05:52.8698] requested variant: Erase
[23:05:52.8822] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:53.4330] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
[23:05:53.4334] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 0x6000002b7ac0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4339] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 0x6000002b7460 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4344] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0x6000000bf680 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4349] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0x6000002a13e0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4354] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0x6080000b40a0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4359] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0x6000002a88e0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4364] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0x6000002af720 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4369] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0x6000002b6380 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4374] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 0x6000000bcaa0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4379] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 0x6000002b1760 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4384] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 0x6000002ac240 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4388] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 0x6000002b0bc0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4392] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 0x6000002b5cc0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4396] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 0x6000002b0740 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4400] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 0x6000002aa980 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4405] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 0x6000002b1340 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4408] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 0x6000002b13a0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4412] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 0x6100000b5600 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[23:05:53.4416] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 0x6000008531a0 [0x7fff72885f00]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[23:05:53.4419] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
[23:05:53.4422] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/tmp/PersonalizedBundle_E7EE0982-00C0-4513-B599-39C008B08D9C/am ai/debug/tss-request.plist
[23:05:53.4425] amai: AMAuthInstallHttpMessageSendSync: httpRequest=<CFHTTPMessageRef 0x61000016fc00(0x61000016fc10)> { POST request, priority -1, url http://gs.apple.com:80/TSS/controller?action=2 }
[23:05:53.9574] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
[23:05:53.9640] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/tmp/PersonalizedBundle_E7EE0982-00C0-4513-B599-39C008B08D9C/am ai/debug/tss-response.plist
[23:05:53.9676] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
[23:05:53.9709] iBoot build-version = iBoot-1940.10.58
[23:05:53.9716] iBoot build-style = RELEASE
[23:05:53.9720] requested restore behavior: Erase
[23:05:53.9731] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:53.9735] requested restore behavior: Erase
[23:05:53.9747] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:53.9751] unable to open device_map.txt: No such file or directory
[23:05:53.9937] found device map entry for 0x00008950 0x0000000a. boardConfig=n48ap platform=s5l8950x
[23:05:53.9941] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[23:05:53.9945] DeviceRequest failed: 0xe000404f
[23:05:53.9949] command device request for 'getenv radio-error' failed: 2008
[23:05:53.9952] radio-error not set
[23:05:53.9955] unable to open device_map.txt: No such file or directory
[23:05:53.9958] <Recovery Mode Device 0x60800014bf20>: production fused device
[23:05:53.9961] requested restore behavior: Erase
[23:05:53.9965] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:53.9968] requested restore behavior: Erase
[23:05:53.9977] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:54.0270] <Recovery Mode Device 0x60800014bf20>: operation 4 progress -1
[23:05:54.0553] bootstrapping restore with iBEC
[23:05:54.0557] requested restore behavior: Erase
[23:05:54.0568] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:54.0673] <Recovery Mode Device 0x60800014bf20>: operation 31 progress -1
[23:05:55.0687] <Recovery Mode Device 0x60800014bf20>: Recovery mode succeeded
[23:05:55.0692] Finished Recovery Restore Phase: Successful
[23:05:55.1899] Recovery mode device disconnected
[23:05:55.1903] Device removed when in state Restoring, moving device to transition state
[23:05:55.1906] Changing state from 'Restoring' to 'Transitioning'
[23:05:55.1909] Creating timer to monitor transition
[23:05:57.3207] Recovery mode device connected
[23:05:57.3210] Transitioning device returned, continuing restore.
[23:05:57.3213] Canceling timer
[23:05:57.3217] Changing state from 'Transitioning' to 'Restoring'
[23:05:57.3220] requested restore behavior: Erase
[23:05:57.3223] requested variant: Erase
[23:05:57.3227] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.6937] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[23:05:57.6941] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[23:05:57.6945] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[23:05:57.6950] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[23:05:57.6953] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[23:05:57.6957] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
[23:05:57.6961] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[23:05:57.6964] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[23:05:57.6968] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[23:05:57.6971] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[23:05:57.6975] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[23:05:57.6978] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[23:05:57.6981] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[23:05:57.6984] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[23:05:57.6987] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[23:05:57.6991] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[23:05:57.6994] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[23:05:57.6997] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[23:05:57.7000] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[23:05:57.7004] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[23:05:57.7007] iBoot build-version = iBoot-1940.10.58
[23:05:57.7011] iBoot build-style = RELEASE
[23:05:57.7015] requested restore behavior: Erase
[23:05:57.7018] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7022] requested restore behavior: Erase
[23:05:57.7025] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7029] unable to open device_map.txt: No such file or directory
[23:05:57.7033] found device map entry for 0x00008950 0x0000000a. boardConfig=n48ap platform=s5l8950x
[23:05:57.7036] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[23:05:57.7040] DeviceRequest failed: 0xe000404f
[23:05:57.7043] command device request for 'getenv radio-error' failed: 2008
[23:05:57.7047] radio-error not set
[23:05:57.7050] unable to open device_map.txt: No such file or directory
[23:05:57.7054] <Recovery Mode Device 0x60800014d1b0>: production fused device
[23:05:57.7057] requested restore behavior: Erase
[23:05:57.7061] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7065] requested restore behavior: Erase
[23:05:57.7068] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7325] <Recovery Mode Device 0x60800014d1b0>: operation 4 progress -1
[23:05:57.7714] unable to open device_map.txt: No such file or directory
[23:05:57.7719] found device map entry for 0x00008950 0x0000000a. boardConfig=n48ap platform=s5l8950x
[23:05:57.7722] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[23:05:57.7726] requested restore behavior: Erase
[23:05:57.7733] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7738] requested restore behavior: Erase
[23:05:57.7750] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:57.7754] <Recovery Mode Device 0x60800014d1b0>: operation 42 progress -1
[23:05:57.7758] requested restore behavior: Erase
[23:05:57.7767] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[23:05:58.8029] <Recovery Mode Device 0x60800014d1b0>: operation 5 progress -1
[23:05:59.1074] unable to open device_map.txt: No such file or directory
[23:05:59.1078] found device map entry for 0x00008950 0x0000000a. boardConfig=n48ap platform=s5l8950x
[23:05:59.1082] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[23:05:59.1086] DeviceRequest failed: 0xe000404f
[23:05:59.1089] command device request for 'getenv ramdisk-delay' failed: 2008
[23:06:00.7244] <Recovery Mode Device 0x60800014d1b0>: operation 6 progress -1
[23:06:01.7350] <Recovery Mode Device 0x60800014d1b0>: operation 7 progress -1
[23:06:02.0286] <Recovery Mode Device 0x60800014d1b0>: operation 8 progress -1
[23:06:02.0290] unable to open device_map.txt: No such file or directory
[23:06:02.0294] found device map entry for 0x00008950 0x0000000a. boardConfig=n48ap platform=s5l8950x
[23:06:02.0298] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[23:06:02.0301] <Recovery Mode Device 0x60800014d1b0>: operation 9 progress -1
[23:06:02.0305] <Recovery Mode Device 0x60800014d1b0>: Recovery mode succeeded
[23:06:02.0308] Finished Recovery Restore Phase: Successful
[23:06:03.2217] Recovery mode device disconnected
[23:06:03.2220] Device removed when in state Restoring, moving device to transition state
[23:06:03.2223] Changing state from 'Restoring' to 'Transitioning'
[23:06:03.2226] Creating timer to monitor transition
[23:06:29.9952] Restore completed, status:4013
[23:06:29.9952] Failure Description:
[23:06:29.9952] Depth:0 Error:Unexpected device state 'Recovery' expected 'RestoreOS'

I ran into the problem you have after trying to update to 7.1.2 the phone updated, but got stuck in recovery mode, and none of the reset methods worked. I did some searching and came up with a simple method, and it got me out of the loop.
Once i used this app, My phone booted and The update was in place.
http://jaxov.com/2010/05/recboot-iphone-recovery-mode/

How: can i get a specificated item from a list with more than 100.000 items

Hi,
i have a very large list and i got always an exception that the list has more than 5000 items and cant query!! But in the default list view i can see, order and filter all items. So how can i do this by c#?

Hi,
According to your description, my understanding is that you want to get a specific list item form a list which with more than 100000 items using C#.
I suggest you can use CAML Query with some condition and set Row Limit to specify the number of items to return.
Here is a detailed code demo for your reference:
Client Object Model Access Large Lists/Overcome ListView Threshold while accessing large list
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

TS3694 I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please

I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Get a specific cluster out of a datalog file

Similar Messages

Maybe you are looking for