Get and Put not working in Fireworks

The file transfer commands in Fireworks are active, since the
sites have been defined in Dreamweaver, and they look like they
work (the proper screens seem to pop up, but only for a second,
even on large files), but I don't see any logs and the files are
not actually transfered. I have to go through Dreamweavers file
panel to transfer them. Any ideas?
Thanks,
Chris

Check to make sure that PNG files aren't cloaked in DW. That
might be
causing the problem.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
Extending Knowledge, Daily
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
news://forums.macromedia.com/macromedia.fireworks
news://forums.macromedia.com/macromedia.dreamweaver
[email protected] wrote:
> I had to ask the system administrator about the SFTP or
third-party systems,
> and he said no. . . I was kind of hoping that was it.
>
> All the rest of what you mentioned had been done. The
file transfer buttons
> were and are active. If I do a transfer in Dreamweaver,
it works just fine. But
> when I open the same file in fireworks, then try a Put,
the file transfer
> screens just fly by, and no file is transfered.
>
> I was able to trap a screen. One says "Failed to delete
file
> product_template_NNW2.png.LCK" - this seems to happen
when I create a file
> locally and there isn't a corresponding file already
existing on the remote
> server.
>
> When the file does exist on the remote server, I get the
message
> '"product_template_3.png" is newer on the remote server.
Do you wish to
> overwrite it?' - but when I press Yes, again the dialog
box pops up very
> quickly and dissapears, and again, no file is actually
transfered.
>
> Should I open a Tech Case with Adobe?
>
>
>

Similar Messages

  • HttpRequest POST and PUT not working?

    Hello:
    To send data to server I am trying to use POST or PUT command but
    just can't get them to work.
    The GET command makes connection to server but not the POST and PUT.
    Tried using onOutput for method GET to send data but data is not transferred if method is GET
    Has anyone successfully using POST command or experiencing similar behavior? Thanks.

    Could you post a code example? POST should be working.

  • I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, HELP

    I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, so i put the old batterys in and it still wont turn on. I am getting so angry woth apple things, the make it sound better than it is and over pice it, i paid over a grand for my imac and it dont even come with a cd SLOT. Please can some one help!

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

    How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

    You should copy everything from your old comptuer to your new one.

  • I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

    I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

    Instead of getting annoyed, read the User's Guide and try basic troubleshooting.

  • I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • I have a ipod 5 and its not working and i will like to get it fixed and i want to see if i still have my warranty

    I have a ipod 5 and its not working and i will like to get it fixed and i want to see if i still have my warranty

    Check Your Service and Support Coverage: Apple - Support

  • After updating to ios 7.0.6 i keep getting an error message saying "this cable or accessory is not certified and will not work reliably with this iphone" every two minutes and its annoying

    What is up with this error message after updating saying our cables are not reliable?

    Thank you for this suggestion, but the message continues to display every couple of minutes. (e.g. "This cable or accessory is not certified and may not work reliably with this iPhone.)
    Not only is it annoying and concerning...this is draining my battery, as the iPhone keeps waking up to display the message over and over. Like "MartinLegodi" above, I also have no cable or accessory plugged in and only use Apple cable and products when I do.
    It's a disconcerting mystery.

  • My Ipod touch 4th generation is not working, its frozen, ive tried everything and its not working, its just frozen on an app and i really really need HELP!!!

    My Ipod is frozen!!! Its a 4th generation and its frozen on an app, Ive tried everything like holding down the lock screen and stuff and its not showing the red thing to slid to shut it down....This is my only thing to use to contact my friends and its not working, i dont have a phone and i cant get one, so this is the onlything i have.....PLEASE HELP!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IPHONE 6 This cable or accessory is not certified and may not work reliably

    I have the IPhone 6.  Bought it last Saturday,Just updated it to the newest 8.0.2 software Friday Sept 26th. No Problems until today, Monday Sept. 29th when Im getting this error .
    It started this afternoon and, no i did not and do not have it plugged in. It was charged this morning and was at 57% battery this afternoon when the problem started.
    Now I get this messege that keeps poping up over and over "This cable or accessory is not certified and may not work reliably with this iphone"
    It keeps popping up and i dont have ANYTHING plugged into it.
    I called Verizon because thats who i bought it from who put me thru second line for help.
    After a bunch of BS and telling me that they have had problems with chargers because of the amplified voltage and wrong plug being sent out  which sounds like bull to me because he said the new iphones have a different head on the plug, not the phone side but the end that has the usb connection and goes to the ac outlet, which dont make a lot of sense when you can also plug them into a usb port. I looked at different iphone plugs from the 4s, the 5 and the 6,and they all show the same input and output voltages and amps. Basically nothing that has to do with my problem i am having
    Anyway at this point now they are saying something may have happened with the new software when i  download it last friday.
    So now they had me backup my phone to itunes, and restore the iphone from itunes.
    When you do this, itunes will automatically download the new version software, which seems to be taking a long time to download.
    I will try to post results later to see if this works......

    I am having the exact same problem you are, straight out of the box.  Got an iphone6+ this morning and five minutes after I turned it on, it started coming up with the same error as you.
    The phone was on ios 8 (not 8.02).  I did the upgrade to 8.02 but it still comes up.  I'd be very surprised if this is a software problem. I didn't even get to charge it or plug anything in !! Started doing it straight away.
    The error comes up even when I have NOTHING plugged it to the phone.
    I am very annoyed!!!
    If possible could you please let us know what the Apple Tech people say.
    thx
    David

  • Im installing the itunes and its not ******* working!!!!

    This is so ******* irriating i got locked out of my phone and im trying to fix that by downloading itunes and its not ******* working so fix your god **** software

    You are not addressing Apple here.  The software is not mine.  When you signed up to this forum you no doubt saw that it is a USER forum and we are all users like you.  Now if you can put your ranting aside and ask your question clearly you might get some kind user to volunteer a solution for you

  • My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

    My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

    Hello there, Capricious13.
    There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Get and Put options are greyed out in DW CS4

    I am a fairly green Dreamweaver user, and recently (finally) upgraded from MX4 to CS4.  I am trying to get a file from my local c:drive and both the get and put functions are greyed out.  Any idea how to enable these functions?  I do not have the file that I wish to transfer open.

    When you say you are trying to get a file from your local c:drive, dio you mean that you are trying to import a file into your site from elsewhere on your computer, rather than 'getting' it from your remote server.  If you are trying to import a file from your local c:drive don't use the 'get' or 'put' buttons because they are just for remote connections, instead just use windows explorer to locate the file then either copy or cut and paste the file into the folder for your site.
    Richard

  • Keyboard and Trackpad Not Working; Mac OSX Unexpectedly Quit?

    Hey everyone... I think I may need to stop by the Apple store to figure this one out, but I just wanted to make sure if there was anything I could do on my own first.
    So basically, on my MacBook Pro that I got nearly two years ago (late September of 2006) for the past month and a half has had problems. In the beginning, the mouse and keyboard would freeze up and just not work. Restarting the comp did nothing. Some times were worse than others (once it was frozen for 1.5 hours). Then it stopped, every now and then having a few freezes (sometimes when the keyboard froze but the trackpad was still good), but two days ago I had my comp not hooked up to an adapter. When the battery got low, the comp froze. I went to bed and closed the laptop, and the next day it was still frozen. I unfroze it, but then it happened again (I'm pretty sure the same situation... almost no battery)... and it is still frozen, even after multiple restarts.
    Also, during the time when freezes weren't as bad, sometimes the keyboard would get stuck on one key, usually the volume up button (very annoying)... then I was told to restart the comp. When I came back, I was told that Mac OS X had unexpectedly quit.
    Sorry that was a lot to read, but any help is really appreciated! Thanks!
    Not sure if this is also important, but I did spill some water on the keyboard a very long time ago (late December '06)... it wouldn't take this long for that to cause the problem, would it?

    Does booting up in [Safe Mode|http://support.apple.com/kb/HT1455?viewlocale=en_US] help at all? This boot mode checks the disk on startup and disables non-apple start up items and certain kernel extensions.
    Steve

  • Why does drag and drop not work?

    Why does drag and drop not work?

    Do you mean that when you move files on the Desktop, they don't stay where you put them ?.
    If so - use Finder - View menu - Show View options & choose 'Arrange by' : none
    If not - please describe exactly what the problem is.

Maybe you are looking for

  • File to IDOC for multiple records

    hi friends    my requirement is to design a scenario for FILE to IDOC (for customers) say i have 120 customers. i have changed the XSD file for IDOC and strucked at Integration Process. can anyone guide me in BPM. thanks and regards suman.

  • The before after...

    I once had a program that disabled a button when a frame/dialog was visible, and then enabled the button when the frame/dialog was not visible... problem is, I can't remember how to do something like that! if you could guide me i'd appreciate it, tha

  • Adobe products work properly with my new iMac.  Why?

    I recently purchased a new iMac and none of my Adobe products work properly with it.  I can't click on a PDF and have it open automatically.  I have to open it through Adobe Reader.  Same with my Adobe Photoshop CS.  I can't open an iPhoto image thro

  • We need an expert!

    It hit me that the exchange could really use an expert or two. Someone who could speak for NI and settle the "why" questions. I am not saying that we should draft Greg McKaskle, but the Exchange would benefit if there waws someone around that could "

  • Switch management access

    Hello, Cisco 3560 configured with management VLan10 ip 10.10.10.10 can be accessed via ssh, add new management interface VLan60 ip 10.10.60.10, also can access via ssh. When I remove interface vlan 10, I can no longer access the switch, ip 10.10.60.1