Get and Put options are greyed out in DW CS4

I am a fairly green Dreamweaver user, and recently (finally) upgraded from MX4 to CS4.  I am trying to get a file from my local c:drive and both the get and put functions are greyed out.  Any idea how to enable these functions?  I do not have the file that I wish to transfer open.

When you say you are trying to get a file from your local c:drive, dio you mean that you are trying to import a file into your site from elsewhere on your computer, rather than 'getting' it from your remote server.  If you are trying to import a file from your local c:drive don't use the 'get' or 'put' buttons because they are just for remote connections, instead just use windows explorer to locate the file then either copy or cut and paste the file into the folder for your site.
Richard

Similar Messages

  • Calendar and contact options are greyed out

    Hi all,
    I wand to sync my contacts and calendar between my iPad1 and my Windows Laptop.
    After installing the icloud sync software, I was only able to check "favourites and photostream" to be synced. The fields mail, calendar and contacts are greyed out and not available to select.
    I have browsed through the Internet, de-installed that software piece and installed it again, not change.
    Passwaords have been corrected according to the iTune needs (8characters, and so on).
    I do not know what to do, any ideas?
    Thanks

    When you say you are trying to get a file from your local c:drive, dio you mean that you are trying to import a file into your site from elsewhere on your computer, rather than 'getting' it from your remote server.  If you are trying to import a file from your local c:drive don't use the 'get' or 'put' buttons because they are just for remote connections, instead just use windows explorer to locate the file then either copy or cut and paste the file into the folder for your site.
    Richard

  • Logic 9 - factory and function options are greyed out in audio editor

    When editing audio files, I can't seem to use the things like reverse, fade in fade out etc. as they are all grey. I've tried all sorts of audio files and made sure they're not locked and also tried bouncing them down into another folder but no joy. Any ideas?

    When editing audio files, I can't seem to use the things like reverse, fade in fade out etc. as they are all grey. I've tried all sorts of audio files and made sure they're not locked and also tried bouncing them down into another folder but no joy. Any ideas?

  • Iphone fingerprint options are greyed out and won't enable!!

    I Have had my iPhone 5s since feb and never had an issue, but just yesterday the finger print scanner stopped working... Went back in to enable and the options are greyed out.. When I click them to enable them it just says failed. Have restored and turned off loads!! Help!!!!

    Try a reset, hold down the home/sleep button together until you see the apple logo and then release then wait for the phone to boot back up.
    iPhone 5s: Using Touch ID
    You still have a 4 digit passcode turn on right?

  • Trying to get cd onto ipod touch but snching options are greyed out - I've opted to manually manage.

    I'm trying to get CD onto ipod touch. copied it into ITunes library but when I get to synching 'selected playlists etc' all options are greyed out.  If I try and clink sync in bottom right hand corner it gives me warning msg that everything already on ipod will be deleted and I don't want that.  any ideas?

    Head to Settings -> General -> Restrictions on your iPod Touch and make sure that restrictions for app installations are turned off.
    B-rock

  • Since updating to Yosemite and CS6 2 of my print options are greyed out on my epson R2880 print pane?

    My colour and colour settings options are 'greyed out' on my  Epson printer pane since updating to Yosemite and CS6,this happened before after running a software update on the printer driver! The driver version at that time was 6.62 and now it has updated to version 9.00....could this be the problem??

    That's strange ... did you try restarting before printer install? You also may need to delete the printer itself (System Preferences > Printers & Scanners) and add it again , in order to access the proper drivers (?)
    Can you show screen shot(s) of your incomplete print dialog?

  • When I try and print a web page in the print screen ALL the Print Frame options are greyed out. It won't let me print a page as I see it. I need to pring a page as is. How do I do it in the new 8.0??

    I go to print and try to select the radio button to print all frames, but It's not working

    The '''Print Frames''' options are greyed out unless the web page is made with Frames. I-Frames don't work the same.
    Check out this '''''frames test page''''' - http://www.draac.com/framestest.html <br />Is the '''Print Frames''' part of the print dialog box active?
    As far as printing a page as you see it, many web pages use '''print.css''' files for print-media. The print.css specifies exactly what is to be sent to the printer and it can control the formatting of the printed page.

  • IWeb window won't load - and all menu options are greyed-out

    I've used iWeb before (with a web site set-up), but I tried to open it today and the iweb screen would not open. The program menubar loads, but almost everything,including New Page and New Site are greyed out.
    I checked my ME account and it is active and working.
    Not sure what the problem is here - any ideas?

    Hi, I had the same problem!
    After one evening of pulling my hair out, I tried the following:
    1. Located the 'domain' file (or package). In my case at /*user/Library/Application Support/iWeb.
    2. moved the domain file to the desktop (or somewhere else)
    3. Started iWeb. I got the warning that iWeb needed a domain file in order to operate, and I confirmed that I wanted the program to create a new one for me.
    4. iWeb started as normal, but with no contents. I closed iWeb.
    5. I ctrl-clicked the original domain file on my desktop, and selected 'show package contents'.
    6. I ctrl-clicked the new, empty domain file in the Application Support/iWeb directory, and selected 'show package contents'.
    7. I deleted everything in the new, empty domain package file.
    8. And finally copied the contents from the old (seemingly corrupt) package file into the new one.
    9. Hooooray! iWeb started with the old contents intact!

  • Save and Save As options are greyed out

    I have an install of Adobe X Standard. An external source is sending in PDFs which are marked as Secured. However, according to the creator of these documents, only editing has been locked down, not Save or Save As functionality. When I open the document, all Edit functionality, as well as Save and Save As are greyed out.
    This is a new install of Adobe X. These documents could previously be saved using the same version of Adobe, but that machine needed to be re-installed due to OS instability. After re-installing Windows 7, then Adobe X, then updating to 10.1.13, these functions are now missing. I have no idea as to why. Does anyone know what might be causing this? Again, I've verified with the original creating that Save functionality shouldn't be disabled.

    There is no security setting that locks out save/save as.
    Save is greyed out when a file has not yet been changed, so that is normal. Save AS should not be greyed out at all. Don't know why that should happen.

  • CS6 Encore launches but all options are greyed out

    The headline says it all. I'm using CS6 on a MacBook Pro, OS 10.7. Previously Encore has worked well. After the most recent update, Encore will launch but all of the options are greyed out. I can't start a new project, etc. When I try to open a previous Encore project, I receive an error message that some needed software is missing. Any ideas to help me solve the problem? With many thanks.
    Christopher B

    I suspect that same sort of issues that one gets when the activation is messed up. I think the resolution is deactivate and reactivate.
    Are you missing any presets in Premiere? I would look at some of the issues in the Premiere forum to further diagnose the problem and look for the recommended fix.

  • IMovie: My options are greyed out in content library. Help!

    I have iMovie 10.0.6 and I have used iMovie in previous versions. When I go to window > content library all the options are greyed out. How do I fix this?!

    anyone?????

  • When I select the lab color mode, many options are greyed out?

    Can anyone help me .  When I select Lab color, many options are grey out.  The following are greyed out: exposure,vibrance, black and white, channel mixer, and selective color.  It worked perfectly the first time I used it but will not work now.  Do I need to reset something.  I have tried everything I can think of.  I use a PC and PS 5.
    Thanks for the help.

    I'm working on the Mac versions of CC and CC 2014. If I select Lab, those very same options are grayed out.

  • Newbie:  In printing dialog, "Scale to" size options are greyed out

    I am in the initial stages of figuring out how to use Aperture (v1.5). I am currently trying to make a 5x7 print of a photo.
    In the print dialog, "Scale to" 4x6, 5x7, 8x10 size options are greyed out (only "fit image" and "fill entire page" are available).
    I've tried searching through the forums, but to no avail...
    Thanks!

    Click the Arrange button on the toolbar and select the desired option.

  • Share Calendar & Calendar Permission Options are Greyed Out

    I was trying to share my calendar with my bosses and colleagues but I couldn't. I found my Outlook Share Calendar & Calendar Permission Options are greyed out. 
    I am using Microsoft Office Outlook 2013 IMAP account. 
    Please help me on this matter. 
    Regards;
    Taufiq

    Hi Taufiq,
    From your description, I recommend you follow the steps below to use Outlook safe mode to determine whether the issue is related to add-ins.
    Run -> Type Outlook.exe /safe -> Click OK
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Lightroom 5.4. Edit options are greyed out. I tried reset warnings already.

    Hi,
    I just added a bigger harddrive and reinstalled Lightroom 5.4.
    Now,  2 of 3 edit options are greyed out.
    No access to plug-ins or external editors for original files.(NEF's)
    I tried reset warnings already.

    Yes, Nikon transfer was used. From a D800, But that was a year ago.
    It has been working fine.
    Before I upgraded to 5.4 I had this problem.
    When I upgraded to a larger harddrive and re-installed 5.4 the access was limited to only "Copy with Lightroom adjustments."
    Last night it started working, I had full access!
    But, today it won't work on the same image/plug-ins.
    the NIK Collection for example.
    This effecting ALL RAW files! D100, D90, D3100, D7000, D800.
    My Laptop is doing it now, too!!!
    I installed DNG Converter 8.4 with No Difference. NO RAW EDITS.
    I can't send a NEF to DXO Optics Pro 9, or anything else!

Maybe you are looking for

  • Delay in save and open dialog boxes waiting for Sidebar "Favorites" section

    Upgraded Macbook Pro (3,1) from Snow Leopard 10.6.8 to Lion 10.7.2. Ever since upgrading, when opening or saving documents in any application, the Favorites section in the sidebar is blank for a few seconds, maybe 5-10, and then populates normally. I

  • My Passport for Mac external Hard drive is not recognized

    I recently had to purchase a new MacBook Pro, and when I tried to get files off of my Passport for Mac external hard drive.  I get an error stating "The disk you inserted was not readable by this computer."  And when I try to initalize, and verify di

  • Developing the report

    Hi, I required a report with purchase order GR/ IR postings and vendor account how much paid to vendor and out standing balance What tables is required how can I develop report Please help me it is very urgent I will assign points Thanks   Radha

  • Order of execution of rules in a transformation

    I have a transformation in wich 2 rules are using abap-code. Both rules need an initial calculation which is the same for both rules. After the initial calculation each rules proceeds differently. So I have rule 1: - INITIAL ABAPCODE A - FURTHER ABAP

  • Multiple Database configurations with Hibernate and caching

    Hi, I am building an webservice app which has 2 different DBs( Oracle and DB2). Please let me know whats the best way of designing the hibernate layer to access both the DBs ; I have some cross reference tables in both of them. I am planning to creat