Get error mesage when installing Ipod

When I try to install Itunes 7 in my laptop, I get and error:
The older version of Apple Software Update can't be removed. Contact your technical support group.
I try to remove it with windows remove program (removing Itunes) however I get an error:
The feature you are trying to use is on a network resource that is unavailable.
The file that is looking for is "iTunes.msi" which is no where in my laptop. Apparently they install my iTunes in Venesuela in my syster office and now I do not have a connection to her network.
How can I remove/install iTunes ?? thank you

Hi Paul. Two more things:
- Click the Apple logo and run Software Update. Update everything. Restart.
- If this still doesn't solve the problem, install Cocktail. Cocktail is a maintenance program for your Mac. You can install it here:
http://www.macosxcocktail.com/
In Cocktail, run the"Pilot" option. After it is finished, restart.
Best of luck,
Vikram

Similar Messages

  • Get error message when syching iPod, iPod cannot be synced. You do not have enough access priveleges for this operation.  How to solve this?

    Get error message when syching iPod, iPod cannot be synced. You do not have enough access priveleges for this operation.  How to solve this?

    Hello FranBNYC
    It sounds like a permissions issue with your library, check out the article below to check and make sure that things are set correctly.
    Trouble adding music to iTunes library or importing audio CD
    http://support.apple.com/kb/ts1387
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I KEEP GETTING ERROR -3 WHEN INSTALLING THEN ERROR -2093 WHEN I TRY TO RUN

    I KEEP GETTING ERROR -3 WHEN INSTALLING QUICK TIME, AND THEN WHEN I TRY TO RUN ITUNES I GET ERROR -2093. PLEASE HELP!! I HAVE DELETED AND REINSTALLED THIS MORE THAN 5 TIMES ALREADY! I HAVE AN ACER COMPUTER WITH WINDOWS XP. IF YOU CAN HELP ME PLEASE REPLY OR WRITE ME AT [email protected]

    Hi DaFudgeWizzad57392483,
    Please refer to the threads below where this issue has been addressed:
    1. Installing Creative Cloud-Error 205
    2. Creative Cloud Error 205
    3. Creative Cloud App, installation error code 205
    Regards,
    Sheena

  • I get error 1309 when installing a downloaded version of Lightroom 5 trial

    I get error 1309 when installing a downloaded version of Lightroom 5 trial

    See the following help document:
    Error 1321 or 1309 | Install | CS4, CS5, CS5.5 | Windows
    http://helpx.adobe.com/creative-suite/kb/error-1321-or-1309-install.html

  • Error message when installing ipod on my mac mini:

    "You cannot install ipod on this volume. This installer does not contain support for your system language."
    This is the message I get when I try to load from the cd or the net the ipod software on my mac mini. As far as I am aware my language is set to english.
    Any ideas?
    Thanks

    Hi Paul. Two more things:
    - Click the Apple logo and run Software Update. Update everything. Restart.
    - If this still doesn't solve the problem, install Cocktail. Cocktail is a maintenance program for your Mac. You can install it here:
    http://www.macosxcocktail.com/
    In Cocktail, run the"Pilot" option. After it is finished, restart.
    Best of luck,
    Vikram

  • Getting error 25004 when installing MS Project 2013 Trial edition on Windows 8

    I am trying to install the trial version of MS Project 2103 on my Windows 8 laptop. When I try to activate my key, I get error 25004. It thinks that I have another trial version on my computer. I un-installed my office 2010 (the only Office installed on
    my laptop) and tried un-installing and re-installing Project and when it comes to activating the key, it give me the same error message. Somehow, it thinks that I still have another trial version on my computer. Any help would be greatly appreciated!

    Pls try fixit tool here at: http://support.microsoft.com/fixit/
    Also this article contains some relevant information: http://www.pallareviews.com/2997/office-2013-error-25004-fix/

  • Why do I get Error 1627 when installing NI-488.2 ver 2.2SW on WinXP?

    when installing NI-488.2 on a win XP laptop I get the following error what do I need to do?
    MsiError 1627: 1: 2707 2: WindowsFolder.47899608_E211_483A_A7CE_0FDFB1FC04F3
    Exception code: E06D7363 ()
    Fault address: 7C81EB33 0001:0001DB33 C:\WINDOWS\system32\kernel32.dll
    Registers:
    EAX:00D9FA4C
    EBX:0046A160
    ECX:00000000
    EDX:0051ED38
    ESI:00D9FADC
    EDI:00D9FADC
    CS:EIP:001B7C81EB33
    SS:ESP:002300D9FA48 EBP:00D9FA9C
    DS:0023 ES:0023 FS:003B GS:0000
    Flags:00000206
    Stack Trace
    Address Frame LogicalAddr Module SymbolName + Offset
    7C81EB33 00D9FA9C 0001:0001DB33 C:\WINDOWS\system32\kernel32.dll RaiseException + 82
    004D0E5F 00D9FADC 0001:000CFE5F E:\NI-488.2\Setup.exe
    00479A63 00D
    9FBBC 0001:00078A63 E:\NI-488.2\Setup.exe
    004272F7 00D9FCC4 0001:000262F7 E:\NI-488.2\Setup.exe
    00469FEC 00D9FD78 0001:00068FEC E:\NI-488.2\Setup.exe
    0046A0E6 00D9FD9C 0001:000690E6 E:\NI-488.2\Setup.exe
    00472121 00D9FDE4 0001:00071121 E:\NI-488.2\Setup.exe
    004721DE 00D9FF18 0001:000711DE E:\NI-488.2\Setup.exe
    004F7119 00D9FF80 0001:000F6119 E:\NI-488.2\Setup.exe
    004D69AE 00D9FFB4 0001:000D59AE E:\NI-488.2\Setup.exe
    7C80B50B 00D9FFEC 0001:0000A50B C:\WINDOWS\system32\kernel32.dll GetModuleFileNameA + 436

    Hi,
    First make sure that you are installing the software as an Administrator so that you have access to all the registries. Now, if logged in as an Administrator and you are still having this error, check the following link.
    How Do I Install LabVIEW if I Receive an Error During the Installation?
    This document is valid for any software that installs from a CD. Basically is copying the content of the CD into the Hard Disk and running the install from the HD.
    If that doesn't fix the problem then try installing the driver in a different machine just to make sure that it is not the software in the CD that is corrupted. If it is corrupted then you can
    download the driver from the GPIB Drivers page.
    Make sure that every time you want to install or reinstall the driver, that you uninstall the previous version and reboot the computer before installing the new one.
    Hope this helps.
    Ricardo S.
    National Instruments.

  • I keep getting error messages when installing creative cloud desktop app.

    I was having a problem with downloading photoshop.  The creative cloud pop window is just showing a spinning wheel, so I tried to reinstall the creative cloud desktop app but I'm getting an Error 1: Creative Cloud failed to install message. Help please?!

    Wtf help please utilize the steps listed in Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to resolve your current error.

  • Keeping getting error DF016 when installing Master Collection

    Hi,
    I am trying to install the cs5 Master Collection on my Windows 7 PC, and I get through to clicking install and before it gets anywhere it throws up an error that reads "ERROR: DF016: Failed to create required folders". On the Adobe knowledge base it says something about the file permissions, and I have tried to follow the instructions to allow full access to the program files folder. However I'm not 100% sure I did it right, and it still isn't working. But I don't understand why it would have an issue with the file permissions, all the other programs by other manufacturers have always intalled into there with no issues. Any ideas?
    Thanks,
    Ross

    Are you installing the software in your C:/ or to a different drive? , If it is on the different drive then install the application in the c:/
    Check after installing from the Hidden Admin account , to know  how to unable/disable the hidden admin account  follow the link :
    http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/
    If incase this doesn't work then create the folder as C:/adobe and then install the applications here...

  • Getting error message when installing Java 2 SDK SE V1.4.2_02

    When I go to install the program Java 2 SDK SE V1.4.2_02, it starts fine, put mid way through the installation I get the following error:
    Error 1316.A network error occurred while attempting to read from the file
    http://java.sun.com/webapps/download/GetFile/1.4.2_02-b03/windows-i586/Java 2 SDK, SE v1.4.2_02.msi. And the installation just stops.
    I am running Windows XP Home, and IE 6.0. Any help would be greatly appreciated.....
    Thanks,
    Bob

    This error evidently occurs after an upgrade to XP from a prior Windows version. From what I have read, it is due to some registry problems with the upgrade. You may not be able to do an uninstall, but you can install a new JVM by using the offline install as opposed to an MSI install.
    If you are able to get around your uninstall issue, please let us know.
    Thanks...

  • Get error -69 when syncing iPod to Itunes

    I just bought a new Ipod Nano (used to have an mini). I tried syncing it to my existing Itunes library but it said I had to upgrade to 7.0. So I did, and now when I try to sync it it doesn't copy it just gives me a -69 error "attempting to copy to the disk "Jo's Ipod" failed. An unknown error occured.
    Im not sure if the problem is the new ipod, or the upgrade to the later Itunes...help. I was so excited about getting my new one and now it doesn't work.
    Thanks in advance.
    Jo
    Dell   Windows XP  

    See if this helps: iTunes displays a -69 error when syncing iPod

  • I keep getting error 205 when installing adobe creative cloud!

    When I try to install adobe creative cloud, it keeps giving me error code 205! I have tried everything and haven't solved this problem for months. I even upgraded my internet! The LBS log is here. The DLM log is here. Not sure which one is needed so there is both of them, Thanks!

    Hi DaFudgeWizzad57392483,
    Please refer to the threads below where this issue has been addressed:
    1. Installing Creative Cloud-Error 205
    2. Creative Cloud Error 205
    3. Creative Cloud App, installation error code 205
    Regards,
    Sheena

  • Why Do I Get Error 1722 When Installing the Driver CD with Windows XP?

    I'm having problem to install the driver CD, it shows a message saying that occured an error 1722
    A tried to do what you said on this topic: http://digital.ni.com/public.nsf/websearch/34ABE6F20DD4981D86256E8600752DFE?OpenDocument
    But on step 10, when a I tried to Select the property "Replace permission entries on all child objects with entries shown here that apply to child objects" and aply, the PC showed an error saying that de Registry Editor cannot define the security of that key selected or one of its sub-keys.
    I tried to install after this and showed de 1722 error's message again.
    Solved!
    Go to Solution.

    Have you also tried disabling the anti virus?

  • Getting Error Message When Installing Bootcamp

    When I try to install Windows Support Software this error message comes up...

    Your link does not work.

  • Getting error ex20 when installing AE CC

    can't extract files; running Win7 Ultimate 64 bit.  Retried many times.  Any suggestions

    Nobody can say anything without exact system info. Extraction errors can ahve all sorts of causes from being low on disk space to otehr tools blocking the process.
    Mylenium

Maybe you are looking for

  • Phone is really slow with text messages

    hi, im new here and lookin for a little help. iv had the phone for a few months and now my curve freezes when i try to open a text message. also when i press send it freezes up. i dont have to restart it or anything but it takes about 7 seconds to re

  • Multicube creation Issue

    Dear SDN, The compounding consistency is not ensured: InfoObject X__Z is compounded with InfoObject X__Y in an involved InfoProvider. X__Yis mapped to InfoObject X__Z in the identification list. As a result, X__Y must also be mapped to X__Y . Thanks

  • Error message when running Business rules

    Hello, We are having the following error message when launching the business rules; cannot calculate - analytic server error (1013131): Failed to start Asynchonous thread. When looking att he Essabse log, we find the following errors around the same

  • Adobe Document Services / Interactive Forms

    Gud Mrng Techies, Can anyone suggest a gud reading on 1. How To Configure Adobe Document Services on J2EE Engine. 2. How To Work With Adobe Interactive Forms in NWDS using Adobe Live Cycle Designer. Thanks in advance.... Bhushan Reddy.

  • HT1721 First Generation Ipad Few Months Old

    I have the first generation of iPad.  Apple Care replaced my iPad 3 months ago due to a battery/charging problem.  A couple of weeks ago, the iPad screen appeared to have colors reversed.  Photos  appear to be like negitives, background is light, ico