Get following message " There was an error joining the airport network

my windows pc's recognoze home network but get message when trying to connect macbook."There was an error joining the airport network but it does not describe the error.

Homer Leon wrote:
Why can't I connect to WiFi when asked for a password
Judging from what you wrote, because there is something wrong with the settings or the password or passphrase. Make sure all devices use the same type of encryption, and make sure you enter the correct password. WRT to this, read
AirPort: Joining an encrypted WEP or WPA Wi-Fi network
<http://support.apple.com/kb/HT1126>
AirPort: How to enter a hexadecimal 64-character pre-shared key for WPA
<http://support.apple.com/kb/HT3160>
I have removed the password requirement from some of my WiFi options
Bad idea.

Similar Messages

  • I have an iMac G4 with AirPort with OS 10.4.11 installed. I keep getting an error message "There was an error joining the AirPort network "ATT5216." I called ATT U-verse - they were stumped. Any suggestions?

    I have an iMac G4 with AirPort with OS 10.4.11 installed. I keep getting an error message "There was an error joining the AirPort network "ATT5216." I called ATT U-verse - they were stumped. Any suggestions?

    I checked for the IP address, and I'm not pulling one
    up.
    That's the problem. Even with no base stations available you should eventually within a few minutes get a self-assigned IP of 169.x.x.x!
    http://docs.info.apple.com/article.html?artnum=106659
    Maybe you could manually configure an IP but that doesn't answer what's wrong. How about a simple test - create a new Location in Network System Preferences and see if that helps. If it doesn't then maybe a re-install of Airport or System software would help. If the Airport shows up as an available network port then the card is probably OK.

  • There was an error joining the Airport network

    Re: error joining the Airport Network
    My wife and I bought two new Macbooks at Best Buy on December 28, 2006. On the first day, I set them both up to work with our 2WIRE wireless router, and they both worked flawlessly.
    However, on January 27, 2007, my wife started her MacBook, tried to select the wireless router in the Airport drop down menu (like she always has done before with no problem), and received the following error message:
    "There was an error joining the Airport network "2WIRE229"
    After several unsuccessful attempts to fix this problem by restarting and reconnecting, I did some research on the internet and came across the following discussions from other people who have experienced exactly the same problem:
    http://discussions.apple.com/thread.jspa?messageID=3815739

    I am having the same problem. I have an access point in my living room and a homework desk in my bedroom. My desk is maybe thirty feet from the access point through one wall. The desk does sit in front of a window. When I try to use my PowerBook at my homework desk I can, intermittently, pick up three access points: mine and two others. The two others are on the same channel as each other, but that should not be interfering with my access point and certainly shouldn't be causing it to disappear from the list all together.
    Hoping that my signal just wasn't reaching well enough (the antenna on the AP was not very prominent) I bought a 6dBi antenna for it. My PowerBook has always worked in the living room and certainly works there now. I do get a much stronger signal in my bedroom but I still can't use the laptop on my homework desk.
    What doesn't make any sense in all of this is that the wall in my room with the window is the same wall in the living room where there is a large sliding glass door. So, if the interfering signal is coming from outside it should be affecting the living room as well. I am at my wits end on this one.

  • There was an error joining the airport network "2WIRE532"

    I just got my mac back from getting fixed for harddrive problems and now I'm trying to connect to the internet. Before I'd have some problems with losing connectivity but I always could connect. Now as I'm trying to connect to my wireless access point under the list of airport networks, it literally, right after I type in the WEP password, gives me the error message There was an error joining the airport network "2WIRE532". It looks like it doesn't even try to connect as fast as it does it. I need to know what's happening, I really want this mac mini networked to my network on my windows xp os computer.

    I'm having the same problem. The only thing that was different was that we installed a new update from Apple for Quicktime.... then the next day it kept asking for a password (it didn't before) and then when it was entered, it gave me the same error message just a different network name.

  • There was an error joining the Airport network with WEP or WPA

    I use a wireless adsl modem router (Philips). I can only connect via wireless to this router without encryption.
    As soon as I use WEP or WPA encryption, I get the error message "There was an error joining the Airport network".
    Thank you for any suggestion.

    Here are some articles that may help you:
    http://docs.info.apple.com/article.html?artnum=107938
    http://docs.info.apple.com/article.html?artnum=107921
    http://docs.info.apple.com/article.html?artnum=304197
    http://docs.info.apple.com/article.html?artnum=106424
    http://docs.info.apple.com/article.html?artnum=106250
    Do not overlook the possibility that the router itself may be incompatible or may require a firmware update to work properly. You should configure the router to use WPA2, preferably, as this is the most compatible form of encryption with Airports.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • There was an error joining the Airport network "NameOfTheNetwork"

    Hi there
    I am French in London for an internship. I took a flat to share with an other girl. My father advised me to take a Mac for my specific utilisation (internet, music, movies...) and Macs are so cool exept for internet in my case. It doesn't work at all. The network of my landlord is hidden. So, I go in "other", I type manually the network name and the WEP password... Always the same message : There was an error joining the Airport network "NameOfTheNetwork". I tried several times with always the unlucky result.
    My landlord said that there wasn't this kind of problem with her other flatmates before me...
    I am pratically sure that the problem doesn't comme from my Mac because I reached to join an unprotected other network which appear sometimes (but the signal is not enought strong).
    Is there an incompatibility between my Mac and the setup Network? And what do I have to to do to fix it?
    I visited a lot of forums but :
    1-I didn't find any topics on my specific problem
    2-There explanations (when the topic is closed to my issue) are not clear and seem not to correspond to my issue.
    Is there someone who can help me please? I really need internet!!!!!
    Emma

    This confirms it is a WEP issue.
    You will need to find the HEX key.
    One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
    In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
    The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
    One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
    Though sometimes not even that works and the HEX key must be used regardless.
    AirPort: Joining an encrypted wireless network
    http://docs.info.apple.com/article.html?artnum=106424
    Choosing a password for networks that use Wired Equivalent Privacy (WEP)
    http://docs.info.apple.com/article.html?artnum=108058

  • IMac can't get online: "There was an error joining the Airport network "X"

    This didn't use to happen, but now I can't get my iMac (Intel) online. We have a wireless network that works on all the other computers in the house (currently 3). My laptop can be placed on the same desk and connect to our network without any trouble, but the iMac won't. The iMac picks up 8 other networks in the Airport menu--one of which has no security but still doesn't connect to the Internet--but our network's name does not appear in the list and repeated attempts to write it in while choosing "other" lead to the error message in the subject line. The Powerbook, however, picks up 2-4 other networks and always has 4 bars for our network.
    In the past I've been able to correct this by restarting the iMac, but that no longer works--only other change noted is the increase in other networks in the neighborhood.
    Any one have any ideas about how to remedy this?
    Many thanks,
    Anne

    Hi Anne,
    Might try this for starters, even though the Symptoms/Hardware listed are different...
    http://docs.info.apple.com/article.html?artnum=304482

  • New Macbook - "There was an error joining the Airport network..."

    Hey,
    Just bought a new macbook which comes with an Airport Extreme card. This has worked perfectly with my home router (Belkin Mimo) and my work router (unknown) as well as in various train stations and public places. However I'm currently staying at my parents house and I can't connect to their router (3Com Office Connect ADSL Wireless 11g Firewall Router). Originally I thought this was an encryption issue - my parents use a WEP password rather than more sophisticated encryption. However even after making it an open network I still get this familiar error message. I was originally able to log onto a neighbouring "Apple Network" which made me think it was just down to this particular router however I can now longer connect to this. Is Airport Extreme compatible with all networks or only the newest? Are there Mac/PC issues here? Or do you think I need to get my macbook to Apple to see if the Extreme card is faulty? I can still use this router via ethernet.
    Macbook Mac OS X (10.4.8)
    Macbook   Mac OS X (10.4.8)  

    Just to add that I've up to date on all updates and tried various tricks from previous posts about this error message...

  • "There was an error joining the airport network" details included

    im running a linksys wireless router with mac filtering, no password. network works well, filters other people fine, allows me to connect...usually. both mac id's for the PB are in there, ethernet and airport. I can connect wirelessly sometimes and hold the connection for varying lengths of time. hardwired is always perfect. I've searched extensively for answers before bothering all you wonderful people and apparently its an issue related to the computer going to sleep. upon waking up it sees all the networks in range (townhomes, so there are about 6 networks at max) including mine. i try to connect and it gives me the "error joining network" message. I've tried turning airport on and off, restarting computer, and router. nothing seems to do the trick every time, it just randomly will work again. router reset works the best overall but ireally dont want to keep having to do that all the time. Is there any way to fix this issue? thanks in advance for all the help
    linksys router with mac filtering, dhcp
    all other things connect and stay connected just fine

    Silly question first ... do you have a 2.4 Ghz phone or does your neighbor have a teenager with one? Maybe try changing the channel on the linksys.
    I used to live with my sister whose phone would knock out my signal on a regular basis and that's the message I would get.

  • There was an error joining the Airport network "xyz"

    Hello,
    I am recently having a problem as my powerbook cannot connect to wireless network at school. I went to the Help desk at school, but they were not useful at all by blunting saying that they are no mac users.
    Here is a few things that might be helpful to know.
    1) my powerbook is G4 12inc (OS X 10.4.11)
    2) my powerbook could connect to the wireless network without any problems up until last week. (I did have some issue with wifi in the past but it was resolved by turning off the airport for about 10 mins, and turing it back on)
    3) my powerbook however can still connect to other wifi at home or at my friends house (so, this is not my computer issue)
    4) other people (mac users) in school don't have the same problem as mine (the wifi source seems to be ok)
    I cannot trouble shoot since my computer is cool with other wifi except my school network, and other mac users seem to be fine with the school network.
    HELPPPPP PLEASE.. I don't want to go back to the help desk again in school.

    use the network preference and under airport delete your previous network then re-apply that network.

  • Airport displays "There was an error joining the Airport network iBook"

    First my iBook would no longer access my printer via airport - it said no connection, tho nothing was changed. But Airport still connected to the Net. Today neither one works. I've checked all the Sharing etc. settings and they seem correct.

    The iBook is connected via Airport and the iMac via Ethernet. I don't know what I did in the Network and Airport screens but both the Net and printing are now working again. I thought neither Mac was a base station - just the Linksys broadband router I use. It turns out the network WAS called "iBook"

  • Express - there was an error joining the apple network!

    I have an Imac g5 that did not come with an airport expreme card, so I just bought one and installed it.
    I'm also trying to set up a new airport express as my main base station for internet and stereo use. I have a green light on my base station, but every time I try to use the Airport Setup Assistant, I get the error message, "there was an error joining the apple network". My computer recognizes that there is a new network and asks me if I want to join it, but when I try to, I get that error message. I pulled out the extreme card and reinstalled it. I moved the AX right next to my computer . . . still nothing. I spent a half hour on the phone with Apple support, and he concluded that the AX was defective. I exchanged it, and am still having the same problem. HELP PlEASE!
    My OS is 10.3.9
    Imac G5   Mac OS X (10.3.9)  

    I checked for the IP address, and I'm not pulling one
    up.
    That's the problem. Even with no base stations available you should eventually within a few minutes get a self-assigned IP of 169.x.x.x!
    http://docs.info.apple.com/article.html?artnum=106659
    Maybe you could manually configure an IP but that doesn't answer what's wrong. How about a simple test - create a new Location in Network System Preferences and see if that helps. If it doesn't then maybe a re-install of Airport or System software would help. If the Airport shows up as an available network port then the card is probably OK.

  • When I try to update an app in the App Store i get a message "There was an error in the App Store. Please try again later. (13)"  I have tried many many times and keep getting the same message.  How do I resolve?

    When I try to update an app in the App Store i get a message "There was an error in the App Store. Please try again later. (13)"  I have tried many many times and keep getting the same message.  How do I resolve?

    First take the steps recommended in this support article. If there's no change, continue as follows.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Cookies/com.apple.appstore.cookies
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • TS1424 I am unable to update my apps and get this message: There was an error in the App Store. Please try again later. (20)

    Help, i'm unable to update anything in the app store and get this message: There was an error in the App Store. Please try again later. (20)? I updated my account info and still no luck...
    And yes, I have tried later.

    And now I get this message:
    There was an error in the App Store. Please try again later. (13)

  • Library recovery: how can I recover a library after I get this message: There was an error opening the database for the library "/Users/Jim/Pictures/Libraries/K2 Library.aplibrary"???

    Library recovery: how can I recover a library after I get this message: "There was an error opening the database for the library “/Users/Jim/Pictures/Libraries/K2 Library.aplibrary”???

    Thanks a lot, Frank. The lsregister did the trick! I am testing this on 10.8.2.
    http://support.apple.com/kb/TA24770 : I deleted the "com.apple.LaunchServices.plist", and restarted the Finder, even logged off and on again; did not change anything. The file has not been recreated, so it may not be used anymore.
    http://itpixie.com/2011/05/fix-duplicate-old-items-open-with-list/#.ULZqa6XAoqY
    The direct "copy and paste" from the post did not work: I had to retype it :
    /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
    but then it worked like a charm!
    Cheers
    Léonie
    And btw: I turned on the "-v" option for the lsregister to see, what was going on, and saw plenty of error messages (error -10811); so I repeated the command with "sudo". After that I still saw five iPhotos. Repeating as regular user finally got rid of the redundant iPhoto entries. It looks like registering as super user may be causing this trouble.

Maybe you are looking for