Get-SCPerformanceData Network And Storage Usage Data

The Get-SCPerformanceData -VMHost hostname -PerformanceCounter NetworkIOUsage -TimeFrame Hour powershell command successfully brings back data, but the problem is I'm not sure what metric the data that is collected by the powershell command is in. 
Is it bits, bytes, Kb, KB, Mb, MB per second?  I'm assuming based upon the data it looks as if it is bits per second.  The same goes with StorageIOPSUsage, it brings back data but not sure of the metric.  Anyone know metric the data is in when
retrieved by the powershell command?  Thanks.

The Get-SCPerformanceData -VMHost hostname -PerformanceCounter NetworkIOUsage -TimeFrame Hour powershell command successfully brings back data, but the problem is I'm not sure what metric the data that is collected by the powershell command is in. 
Is it bits, bytes, Kb, KB, Mb, MB per second?  I'm assuming based upon the data it looks as if it is bits per second.  The same goes with StorageIOPSUsage, it brings back data but not sure of the metric.  Anyone know metric the data is in when
retrieved by the powershell command?  Thanks.

Similar Messages

  • Get the first and the last date of a week

    Hi all
    I need to get the first and the last date of a specific week.
    I need a function that returns two date passing it just one date.
    The function has to calculate the first and the last date of the week of the argument date.
    hope to be clear
    regards

    goiters,
    I need to get the first and the last date of a specific week.Yup, and what's the first day of the week in your part of the world, is it Sunday or Monday?
    I need a function that returns two date passing it just one date.No you don't, just add 7 days to the start of the week.
    hope to be clearWell, you can hope.
    Keith.
    Message was edited by: corlettk - now I hope to clear ;-)

  • Is there any Vi for getting the CPU and Memory usage of the Local as well as Remote System

    Is there any Vi for getting the CPU and Memory usage of the Local as well as Remote System

    Find the attachment(LV8.5) for local machines. 
    You can use shared variables to monitor the remote machine's usage.
    Attachments:
    Task Monitor 85.vi ‏25 KB

  • My new iPhone get restored and all the storage from my old phone got on my new phone. is there a way I can get the pictures and storage I had on my new phone?

    i plugged my new iPhone into the computer for the first time and it proceeded to restore. i accidentally clicked on the storage saved on my iTunes for my old phone. so now all the storage from my old phone is on my new phone and I can't find any of the storage from my new phone. is there a way to get the pictures and data back onto my phone that i originally had ?

    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622
    SHARING iTunes MUSIC
    http://macmost.com/five-ways-to-share-music-in-itunes.html

  • How to get the Full and final settelment date from PC_payresults

    Hi Experts..sairam.
    We are preparing Functional specification  for a report on Full and final settelement.
    We need to extract the  full and final settelement date from  payresults.
    Full and final settelement would be an offcycle run.
    How can we identify the particular Offcycle is meant for full and final settelment.
    Full and final settelement can be done after date of relieving.
    Please share your ideas to get the field names and logic to fetch.
    Thanks in advance.
    Regards,
    Sairam.

    Hi Praveen,
    I found it from HRPY_RGDIR through SE11.
    But im in confusion in thinking on Logic to find the Full and final settelment processed date.
    First of all..Report has to check WPBP table weather Employment status is Zero.
    Later..It has to read the HRPY_RGDIR table.
    Here what the system to check.What conditions to be validated to fetch the Full and final settelment processed date.Will it be FPPER and INPER as 00000000 or shall we do it from offcycle reason.
    Please share your ideas.Thanks in advance.
    Regards,Sairam.

  • Getting Day, month and year from Date object

    hello everybody,
    Date mydate = Resultset.getDate(indexField);
    Now i would like to get day, month and year from mydate.
    In another words, i'm looking for something equivalent to
    mydate.getDay() as this method is deprecated.
    Can somebody help me out please?
    Thank you in advance,

    swvc2000,
    Here is a sample class that demonstrates two ways in which to do this.import java.util.*;
    import java.text.*;
    public class DateSplitter {
       public static void main(String args[]) {
          /* even though your date is from a result set,
             pretend the following date is your date that
             you are using. The try catch block is used
             because I hand-crafted my date using
             SimpleDateFormat.  Substitute your date.*/
          Date yourDate = null;
          try {
             SimpleDateFormat formatter = new SimpleDateFormat("MM/dd/yyyy");
             yourDate = formatter.parse("05/06/2000");
          } catch (ParseException e) { }
          //the following gets the current date
          Calendar c = Calendar.getInstance();
          //use the calendar object to set it to your date
          c.setTime(yourDate);
          //note months start at zero
          int month = c.get(Calendar.MONTH);
          int year = c.get(Calendar.YEAR);
          int dayOfMonth = c.get(Calendar.DAY_OF_MONTH);
          System.out.println("Calendar Month: "+month);
          System.out.println("Calendar Day: "+dayOfMonth);
          System.out.println("Calendar Year: "+year);
          System.out.println();
          /* Simple date format can also be used to strip them
             out of your date object.  When you use it, notice that
             months start at 1.  Also, it returns string values.  If
             you need integer values, you will have to use
             Integer.parseInt() as I did below.  If you are
             only concerned about the string values, just remove
             the Integer.parseInt part. */
          DateFormat formatter = new SimpleDateFormat("M");
          month = Integer.parseInt(formatter.format(yourDate));
          System.out.println("SDF Month: "+ month);
          formatter = new SimpleDateFormat("d");
          dayOfMonth = Integer.parseInt(formatter.format(yourDate));
          System.out.println("SDF Day: "+ dayOfMonth);
          formatter = new SimpleDateFormat("yyyy");
          year = Integer.parseInt(formatter.format(yourDate));
          System.out.println("SDF Year: "+ year);
       }//end main
    }//end DateSplitter classtajenkins

  • Copy files over network and preserve original date modified/created

    This problem originally cropped up when importing photos into iphoto. I copied all my pics across the network and stored them locally then imported them into iPhoto. Problem was, any pics that did not have EXIF data were sorted by iPhoto, by date created...which was the date they were copied to the Mac.
    I got around that by trashing the iPhoto Library, then importing the photos over the network. The dates on the pics were correct on the Windows machine till the copy process changed them.
    is there a way to copy across the network and keep all the file attributes as they are on the original..An archive type feature.
    I had thought of RsyncX, but have not used that yet from within the Mac.
    Is there a way from within Finder to copy and keep attributes? or a third party app?
    Neil

    zip the folder with your pictures (control-click on it and choose "compress folder"), copy the zip files to the remote computer and unzip it there. this will preserve the modified and created dates.

  • How can I get Virtual Machine NIC traffic usage data using SCOM 2012 R2 ?

    Hello Guys,
    How can I get Hyper-V 2012 r2 Virtual Machine NIC traffic usage data using SCOM 2012 R2 ?
    Thanks
    NM-BG

    Hi,
    Please refer to the following links:
    Hyper-V Management Pack Extensions 2012 / 2012 R2
    https://hypervmpe2012.codeplex.com/
    System Center Management Pack for Windows Server 2012 R2 Hyper-V
    http://www.microsoft.com/en-us/download/details.aspx?id=40798
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to Get As is and As was data using Hierarchies.

    Hi Experts,
    I have scenario,  I want to report sales by the Sales Organization Hierarchy..
    A- B- ORG1 -( 01/2010 - 05/2010)   -
       100
    After 05/2010 my ORG1 has been changed from B to C then my Hierarchy looks like this
    A-C- ORG1 - ( 06/2010 to 12/999) -
    500
    if i build a time dependent Hierarchy on Organization and run a report for calendar month selection as 01/2010 to 12/2010. it is showing the net sales for the Organization  A as 500 only,  the quantity 100 is not showing in the report as the hierarchy structure is not valid for the current date.
    How to model a BW Hierarchy which shows  AS is and As was Data in the report using Hierarchy..
    Thanks
    Bhanu

    Hi,
    Have you tried to make nodes time-dependent and not the whole hierarchy?
    If this is not enough then I am afraid you should not use external hierarchies for this and change data model.
    You can use only ONE hierarchy version in the same time.
    HAve you tried to map this hierarchy to attributes of Org Structure?
    If A is an attribute of Sales ORg you can use it in the report in the way it is required.
    Sorry, I couldn't help.
    Edited by: ASUC on Nov 24, 2010 6:54 PM

  • Network and storage queries in respect to RAC

    Network port usage identification in the switch
    I’m not sure about the usage of number of sockets/ports in the private switches for Oracle RAC. If we run two node cluster, how the socket usage is like and how many more nodes can be added to the cluster.
    For example, if we run two nodes in the cluster, it might use 6 sockets. If the switch is a 24 sockets, I can identify how many more nodes can be added into this cluster. This is to know the scalability of the RAC based on the network component switch.
    for information: Our environment has got a gigabit ethernet switch..not sure about the sockets in it.
    Storage question
    1. How do I identify if a single LUN is shared by multiple databases?
    For example, I see only one data volume in ASM, like '+DATA1' which has got many database datafiles, logfile etc. I want to know is there a way I can see a single LUN or a group of LUN been assigned to this volume group in ASM. Is there a recommended practice to do this setup?
    I read somewhere "The best practices advise not to mix the LUN with different databases present in the cluster to minimize IO operations." The question 1 is based on this only.
    2. If we add/expand the disk or LUN in the volume group, I think the system needs a reboot of all cluster nodes for this to be visible to Oracle ASM. Am I correct? what is restricting not to add dynamically? Storage or OS..no clues for me. Any ideas here...
    I have seen the disks which are already part of the disk group can be added dynamically to the ASM disk group but not sure about the addition/expansion of LUN...
    Thanks in advance.

    Network port usage identification in the switch
    I’m not sure about the usage of number of sockets/ports in the private switches for Oracle RAC. If we run two node cluster, how the socket usage is like and how many more nodes can be added to the cluster.About Switch for Private network... you have 2 nodes ,you should 2 ports on switch. If you make bonding on Private interface (server), so 2 nodes .. each of nodes use 2 ports for bonding -> you should use 4 ports on switch.
    >
    For example, if we run two nodes in the cluster, it might use 6 sockets. If the switch is a 24 sockets, I can identify how many more nodes can be added into this cluster. This is to know the scalability of the RAC based on the network component switch.
    for information: Our environment has got a gigabit ethernet switch..not sure about the sockets in it.about port number on switch... you can check from product owner...
    Many nodes?... if you have plan to add many nodes... you can buy new switch and then cross to old private switch...
    Or example... stack switch feature on Cisco 3750
    http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_25_see/configuration/guide/swstack.html
    Storage question
    1. How do I identify if a single LUN is shared by multiple databases?
    For example, I see only one data volume in ASM, like '+DATA1' which has got many database datafiles, logfile etc. I want to know is there a way I can see a single LUN or a group of LUN been assigned to this volume group in ASM. Is there a recommended practice to do this setup?You have to know what Storage (EMC/NetApp) you are using? and find document... to help
    About ASM:
    Example: ASM with Emc .. check on node1
    $ export ORACLE_SID=+ASM1
    $ sqlplus / as sysdba
    SQL> select path, library from v$asm_disk where LABEL='DATA1';
    PATH LIBRARY
    /dev/raw/raw4 System
    that mean we have to check about device name (DATA1) at /etc/sysconfig/rawdevices file
    Or
    SQL> select path, library from v$asm_disk where LABEL='DATA1';
    PATH LIBRARY
    ORCL:DATA1 ASM Library - Generic Linux, version 2.0.2 (KABI_V2)
    that mean we have used asmlib, So...
    # /etc/init.d/oracleasm querydisk DATA1
    Disk "DATA" is a valid ASM disk on device [1, 127]
    and
    # ls -la /dev/* | grep '1\, ' | grep 127
    We'll see device name 's used for 'DATA1'
    by the way... if you use EMC you can... use "powermt" to check storage on servers
    # powermt display dev=all
    >
    I read somewhere "The best practices advise not to mix the LUN with different databases present in the cluster to minimize IO operations." The question 1 is based on this only.
    Mix the LUN with different database may make bottle neck on HW Storage...
    2. If we add/expand the disk or LUN in the volume group, I think the system needs a reboot of all cluster nodes for this to be visible to Oracle ASM. Am I correct? what is restricting not to add dynamically? Storage or OS..no clues for me. Any ideas here...On Linux... you have to reboot... to reload library... You can reboot each of nodes ... don't need reboot all nodes
    >
    I have seen the disks which are already part of the disk group can be added dynamically to the ASM disk group but not sure about the addition/expansion of LUN...You can use "dbca" to help add/expand LUN , after every nodes see new disks.

  • How to get ONLY month and MONTH within date...

    I have to convert something from sql server to oracle.
    In SQL Server I have:
    SELECT
             TEXT_26 AS CostUnit,
             MILESTONE_DATE AS ContractShipDate,
             ACTUALFINISH AS ActualShipDate FROM PROJ_TASK
    WHERE
              TEXT_29='SHIP'
              AND NAME NOT LIKE 'CMSB%'
              AND NAME NOT LIKE 'CCFB%'
              AND (MONTH(ACTUALFINISH) = MONTH(GETDATE()) - 1)All seems very simple SQL except I don't know how to convert that last line:
    ...         AND (MONTH(ACTUALFINISH) = MONTH(GETDATE()) - 1)Basically Im just extracting the month so that I say the MONTH of the actual finish date is equal to the month of Today - 1. Meaning get the month for today (GETDATE() in sql server) and then subtract ONE month from it.
    How can I do that line in oracle?
    Thanks,
    Jon

    I generally find it simplier if one answers the question I posedYou need to realize that with free advice and help you get what you pay for. If you want people to run the statements for you then you should provide create table and sample data scripts.
    Another alternative is
    trunc(actualfinish,'mm') = add_months(trunc(sysdate,'mm'),-1)http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14200/functions201.htm#i79761
    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14200/functions004.htm#i76717

  • Getting the Transaction/Transaction Code Usage data

    Hello, I wonder if anyone could help me?
    The requirement given by the client calls for a report that displays the usage of a transaction code, specifically the following:
    1. given the transaction code, the date/time it was last used and the user who used it;
    2. given a key date (default current), the list of transaction codes used in the last three months, the user who last used it, also with date and time.
    I have looked at the tcode ST03, but it only gives me the list of transaction codes and users who accessed the transaction code.  I need the access date and time in order to meet the requirement.
    Thanks in advance. Ü

    chk this from other thread
    also chk the structure   MYLIST for the required informatiuon
    report abc.
    DATA : MYLIST LIKE UINFO OCCURS 0 WITH HEADER LINE.
    PARAMETERS : TCODE LIKE TSTC-TCODE.
    CALL FUNCTION 'TH_USER_LIST'
    TABLES
    LIST = MYLIST.
    LOOP AT MYLIST WHERE TCODE = TCODE.
    WRITE : / MYLIST-BNAME , MYLIST-TCODE.
    ENDLOOP.

  • Satellite M100-150 gets "blue screen" and resets bios' data

    This problem started month ago.
    Laptop sometimes shows "blue screen" for unknown reason, and constantly does it if there is some modern graphical game executing.
    After that I always note, that bios' settings were reset to defaults
    what do I have to do?

    Ok, sounds like some kind of an serious issue. Could be a hardware problem, but thats just an guess of your situation.
    Firstly you should perform a BIOS update on your machine to make sure the BIOS rom is OK.
    Then, if the problem persists, I would contact an authorized service partner, since the problem seems then more hardware related.
    If thats the case, then visit the following link to find the nearest ASP in your country. Send your machine there for an hardware checkup:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
    greetings

  • Get CPU and memory usage

    Hi!
    I would like to know if there is any way of getting system CPU and memory usage using Java code.

    I want to get the system CPU and memory usage using the performance monitor dll, the perfctrs.dll, but access this data using Java language.Then you should create wrapper dll between your java code and perfctrs.dll and convert data from format of dll to format of your java code.
    So, that is next question - how to create wrapper dll, how to deal with or how perfctrs.dll works?

  • Get name and type of data in an object?

    Hello,
    I would like to know if there is a way of getting the names and types of data encapsulated by a labview object?
    For example, lets say I make a simple object, called myObject to be unoriginal, with private data: myObjectName (string), myObjectValue (int 32) (etc)
    How then do I construct a method to return the type of the myObjectValue data, or infact return the names and types of all of the data fields within the object, which could be many?
    Thanks,
    Paul.
    Solved!
    Go to Solution.

    Hi there
    i can't find a generic solution. Attached is a workaround. The trick is to pack all private data inside a cluster and use the "Controls" property of a template of this cluster to get all data elements and their types.
    Best regards
    chris
    CL(A)Dly bending G-Force with LabVIEW
    famous last words: "oh my god, it is full of stars!"
    Attachments:
    LVClass_8.5.1.zip ‏38 KB

Maybe you are looking for

  • How to know if a sent-email was opened or deleted? AnyThing in API??????

    Hi pal, Is there anyThing in API to know if a sent email has been opened or deleted by reciever? Asif

  • Max no of application modules

    Hi all, In our Jdeveloper application, we have around 18 root application modules (with no nested application modules). For a new project, we want to build a another model project on top of this application. Is it possible to do so? and if so what ar

  • Register Flash Lite problems

    I registered this on my computer after having problems with my handheld... well once I got that all cleared up I tried to open the program on my handheld and it said It needs to be registered... well I tired again on my handheld and no adobe's websit

  • Latest Flash for G5?

    The latest version of Flash fixes some security vulnerabilites in Flash, but also drops support for PowerPCs. At our company, we have to install the latest versions of the software to be compliant with security policies. Unfortunately, this means tha

  • How to emulate invoke in BPEL process test

    I do some experiments with BPEL tests. There are some possibilities to emulate messages (for receive activities). How can I test invoke activities. I need that BPEL test do not invoke webservice but continue with emulated ouput values. Thanks.