Get these two error messages when I run the iTunes exe file: Error 2 and Error 2 (Windows error 2). Both say Apple Application Support is required. Uninstalled and tried to install again several times. Using Windows 7 64 bit on laptop.
Trying to install iTunes on my Dell laptop with Windows 7 - 64 bit. Get these two error messages when I run the iTunes exe file: Error 2 and Error 2 (Windows error 2). Both say Apple Application Support was not found. Can anyone tell me why this is happening?
See Troubleshooting issues with iTunes for Windows updates.
tt2
Similar Messages
-
Get a message on Itunes to uninstall and re-install Itunes since " Apple Application Support is required" Will this cause me to lose all records? Is there some to avoid this have tried to repair No LUCK
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
everytime i download itunes to my i get a message saying apple application support is required, where do i go for the support ???
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
How can I solve this issue?
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Error message when I run the Web Dynpro Project
Dear friend,
I had deploy & run project, but it's got the error message under the line:
I had install NWDS V. 2.0.11 on my PC, but the project which I deployed was the version that I created by NWDS V. 2.0.9, and I had install new OS as XP Home instead the old one (Windows2000), are these the cause of problem?
Please advise how can I do.
Best regards,
SeMs
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; Media Center PC 3.0; .NET CLR 1.0.3705), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4009.00.0000.20041104173322.0000 (release=630_REL, buildtime=2004-11-18:22:17:10[UTC], changelist=298578, host=PWDFM027)
Web Dynpro code generators of DC local/ZWelCome:
SapDictionaryGenerationCore: 6.4011.00.0000.20050127161623.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:34:47[UTC], changelist=324383, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4011.00.0000.20050121170001.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:38:14[UTC], changelist=322883, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4011.00.0000.20050121165648.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:28:49[UTC], changelist=322878, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4011.00.0000.20050217164947.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:53:22[UTC], changelist=329752, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4011.00.0000.20050217164947.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:53:22[UTC], changelist=329752, host=PWDFM026)
SapGenerationFrameworkCore: 6.4011.00.0000.20041104141254.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:28:00[UTC], changelist=298452, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4011.00.0000.20050215134310.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:42:02[UTC], changelist=329103, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4011.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:32:12[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4011.00.0000.20050121165648.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:28:59[UTC], changelist=322878, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4011.00.0000.20050215134310.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:42:32[UTC], changelist=329103, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_08-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows 2000, version: 5.0, architecture: x86
Message was edited by: Sukasem S.wattanakoon
Message was edited by: Sukasem S.wattanakoonProbably the usual problem of deploying an application built with a newer NWDS (SP11) on an older server (SP9).
But without the stacktrace this is only a guess.
Armin -
Can someone tell me how or why I'm getting an error message when I download the itunes update.
Hi. The download for the itunes update gives me an error 7 windows 193. How do I fix that?
Well, first, if you want help for an iTunes problem, you shouldn't post in the iPad forum. :-)
I've asked that your post be relocated to the appropriate forum.
This should answer your question. http://support.apple.com/kb/TS3074 -
I have instlled and uninstalled iTunes on multiple occasions but iTunes fails to start with message "Apple Application support is required to run iTunes .......... Error 2 (Windows error 2)". Most most frustrating. Can anyone help, pleeeeeeease!!
iTunes "Apple Application Support is required... Error 2" and possible fix.
Hi Redgilly (and others).
I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
Problems:
The initial error during the installation of iTunes was:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
The error (after installing iTunes) when trying to run iTunes was:
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
http://support.microsoft.com/kb/2688946
This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Note: The installation of VC++ rolls back when it fails.
Solution:
Through this error I found this MSKB article:
http://support.microsoft.com/kb/946414
The Automated MS "Fix It" msi package didn’t work.
Note: Please backup your registry first (see the above MSKB article for instructions).
I opened the registry and (as instructed in the MSKB article) deleted the following keys:
HKEY_LOCAL_MACHINE\COMPONENTS\
PendingXmlIdentifier
NextQueueEntryIndex
AdvancedInstallersNeedResolving
Reboot and reinstall iTunes.
I hope this helps. -
I have a windows 7 premium laptop, 64 bit driver, have tried to install itunes but recieve an error when trying to open. Error states "Apple Application Support is required to run itunes. uninstall and reinstall again, error 2 (windows error 2). have tried this 4-5 times with no success. help!
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2 -
I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)".... I have uninstalled and reinstalled several times and the error still occurs!!! This started happening after I installed the 10.3 update
I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and some people said that they worked.
Here is the original Link:
https://discussions.apple.com/thread/2151777?start=0&tstart=0
OK, this worked for me:( Original Post by r0tt3n4pp13)
1. Save iTunes install file to your desktop.
2. Disconnect from internet.
3. Disable Firewall/Security software.
4. Run install. Note that it installs Application Support and a bunch of other software this time.
5. Run iTunes.
6. Enable Firewall/Security software.
7. Reconnect to internet.
8. Download Watchmen Director's Cut post haste.
OR!
(Original post by Cr4z33)
1. Download and install WinRAR.
2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
4. Done! You can now run iTunes normally. -
When I try to run iTunes I receive the following error message: "Apple Application Support was not found. Apple Application Support is required to run iTunes helper. Please unistall iTunes, then install iTunes again". I have done this twice and continue to get the error message. What now?
Hi texasslagle,
It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
There is an article that you may want to use to try to complete your install here -
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Thanks for using Apple Support Communities.
Best,
Brett L -
I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone
Microsoft Windows Vista Ultimate Edition (Build 6000)
Dell Inc. Studio 1535
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0020AEDC02A7C4B8
Current user is an administrator.
The current local date and time is 2012-04-17 17:05:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {92497F93-8A79-419C-AA27-50CD2F263F77}
Description: Microsoft Virtual WiFi Miniport Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {6FECCC1D-04CF-4A3F-92B6-DC6E68D12BE5}
Description: Dell Wireless 1397 WLAN Mini-Card
IP Address: 192.168.0.118
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Tue Apr 17 16:59:28 2012
Lease Expires: Wed Apr 18 16:59:28 2012
DNS Servers: 192.168.20.254
192.168.30.217
Adapter Name: {3323A300-E864-46C3-A6B6-F0B90AFF4AFE}
Description: Broadcom NetLink (TM) Gigabit Ethernet
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-17 17:04:26.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: Optiarc DVD+-RW AD-7640S, Rev HD14
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.This should get your itunes store connection working.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
In iTunes software get error message when attempting to access iTunes Store. Could not connect. Unknown error occurred (0xx800903318). Make sure your network connection is active and try again...NG
Hello there,
Thanks for using Apple Support Communities.
Since this error 0x800903318 combined with the network connection error message is occuring when you're trying to connect to the iTunes Store, I'd like you to please follow the steps in the article linked to below.
Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
Cheers,
Alex H. -
I have a new iTouch. I'm having trouble downloading iTunes. I keep getting the error message: "Apple Application Software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2." I have uninstalled and tried installing again and get the same error message. What do i need to do?
LgInstall 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2 -
I keep getting the error message "apple application support is required to run itunes. Please uninstall itunes and then install it again." I've done this twice and still keep getting the same message...I'm at wits end Please HELP!!!
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I'm getting an error message when I try the click on a link in an email. No associated application could be found. How do I fix this problem?
Is this a one-off or a general problem? If a one-off, is it a link to a web page or something else? If not a web page, try control-clicking on it and choosing to download the linked file. This will at least access the file though it might be to something you don't have an application to open with. If you do this, what sort of file do you get? - select it and hit command-i to get information on it.
Maybe you are looking for
-
[Solved]Calibre No longer working
I'm not sure when it started but I just tried loading Calibre and it crashes at startup. This is what I recieve when running it from a terminal: [keystone@Archos CyberBasics]$ calibre Traceback (most recent call last): File "/usr/bin/calibre", line 2
-
How can i output information at the same location of the console?
I want to print some messages at the same line(location) of the console how can i do that? thank a lot!
-
While checking the MIR5 Report Tax code isn't coming in it?? Can anybody tell me why it isn't coming?? In MIR4 In can see the Tax code. But I want to see the Tax code in All my IV Doc.
-
Transport Request Locks on release!!
Hello there, I am facing one problem; When I create a transport request of a smart form and try releasing it, the request gets locked, thus failing the release. I unlock the request via transport organizer tool (SE03), but again when I try to release
-
When attempting to install Apps such as skype or whatsapp, prompted to advise a parrent to sign in.
Hi, I have a Nokia Lumia 520 phone. When I attempt to install apps such as skype or whatsapp, prompted to advise a parent to sign in. To be sure, I place my birthday as of year 2001 for convienient sake. But I began to think that it could be this rea