Get "Windows BDF contains relative pathname" when backup windows server dir
Hi...
We are testing OSB with several server with windows anf linux, and when when run a scheduled dataset with several servers, all linux servers work correct and all windows server get an error (Windows BDF contains relative pathname). I check the datasets with the "check dataset" button and all is ok.
Any idea?, thanks a lot. Next i put some information:
Oracle Secure Backup Release 10.3.0.2.0
Scheduled dataset: (Simplified)
include dataset ALMACEN
include dataset ARTEMISA
ALMACEN dataset: (Runs ok)
include host ALMACEN
cross local mountpoints
exclude name .Trash
include path / { # include the local root directory
exclude name core # but no core files (for UNIX)
exclude name *~ # and no emacs backup files
exclude path /tmp
exclude path /historico
ARTEMISA dataset: (fails on backup)
include host ARTEMISA
include path "C:\"
exclude name pagefile.sys
exclude path "C:\temp"
exclude path "C:\tmp"
exclude path "C:\windows\temp"
exclude path "C:\CreativaNad"
The jobs sumary:
136 dataset IGNIFUGO 09/19.11:00 completed partially at 2010/09/20.00:36 - 75 not applicable 1 not applicable
select 136.1 136.1 backup ALMACEN 09/19.11:00 completed partially at 2010/09/19.14:53 - some of the requested pathnames encountered errors 75 ALMACEN 1 678.0 GB
select 136.10 136.10 backup ARTEMISA 09/19.11:00 failed at 2010/09/20.00:36 - Windows BDF contains relative pathname(s) 75 ARTEMISA 1 not applicable
The transcrip from ARTEMISA
2010/09/26.20:11:31 ______________________________________________________________________
2010/09/26.20:11:31
2010/09/26.20:11:31 Transcript for job 182.10 running on VCENTER
2010/09/26.20:11:31
Error: ** BDF error in "C:/Archivos de programa/Oracle/Backup/temp/182.10.obbdf" -- line 9: NT bdfs cannot contain relative pathnames
Error: 1 BDF error found - aborting session
Backup statistics:
status 35
devices Grabadora1
devices 1
volumes
voltags
file 7
host ARTEMISA
encryption on aes192
start_time Sun Sep 26 2010 at 20:11:42 (1285524702)
end_time Sun Sep 26 2010 at 20:11:44 (1285524704)
backup_time Sun Sep 26 2010 at 20:11:42 (1285524702)
entries_scanned 0
kbytes_scanned 0
entries_excluded 0
entries_skipped 0
mount_points_skipped 0
files 0
directories 0
hardlinks 0
symlinks 0
sparse_files 0
filesys_errors 0
unknown_type 0
file_kbytes 0
dev_kbytes 0
dev_iosecs 2
dev_iorate 512.0 B/S
path C:/ not started
Hi,
The OS partition is a Dell preinstalled volume. Since Dell indicates the FAT32 partition contains the UEFI build and should not be reformatted/converted, you could simply skip from backup as it is not related to operation system.
For more detailed information, please refer to the thread below:
Windows Server Backup Error: "Volume(s) OS have and unsupported files system and cannot be backed up."
https://social.technet.microsoft.com/Forums/windowsserver/en-US/20bbebf6-b0f8-4ae7-af0d-48b037876ef8/windows-server-backup-error-volumes-os-have-and-unsupported-files-system-and-cannot-be-backed?forum=windowsbackup
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Hi, Mandy
Thanks a lot for replying. The problem is that the OS partition is marked as System. When creating a System State backup, the System partition is presumably included because it has to be present in order for the server to boot. You are not given the
option to skip the partition when trying to do a System State backup.
Similar Messages
-
How to get Windows Server 2012 trial license key?
How to get Windows Server 2012 trial license key? I'm trying to install WinServer 2012 Trial on a VMWare Workstation 9. I'm asked for the product key during set up. If I ignore putting in the key (since I don't have one) The install fails stating no valid
key. I tried this with Oracle's Virtual Box and the same thing happens. I tried using Majic JellyBean to find the key, but that only works on pre-installed OS. A Technet article said to use aaaa-bbbbb-ccccc-ddddd etc. in the spaces. That doesn't work either.
Articles all over the web seem to have other people in the same boat. Please help :)Download the trial version from here -
http://www.microsoft.com/en-us/server-cloud/evaluate/trial-software.aspx It does not require a key. If the software is asking for a key, it is not the trial copy. Where did you get your copy?
.:|:.:|:. tim -
Lost option to upload related files when using testing server.
I used to get a dialogue box when I was previewing files on my local machine using my localhost testing server setup. It was kind of annoying having to click yes every time. Last week I accidentally clicked the don't show this anymore box and now when I preview a site on my localhost related files and updated files are not uploaded. I have to manually upload the css, php, and any other related files to the testing server's folder.
I tried deleting preferences, re-installing Dreamweaver CS4, and everything else I can think of but I can't get this option back. Is there some way, other than using the same folder for the testing server and the site to avoid this problem?
Thanks.Edit > Preferences > Site > Dependant Files > Check the box for "Prompt on Put or Check-in"
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb -
I spent an entire work day trying to configure HYPER-V on Windows 2012 R2 Server to run Windows 8.1 in a virtual operating system. Gave up entirely on Windows 2012 R2 Server since no matter how I changed the memory configuration, it insisted there was
too little memory available to perform bootstrap and initialization of the Windows 2012 R2 Server / Windows 8.1 combination. In vivid contrast, getting Windows 8.1 installed and operational under HYPER-V running on Windows 2008 Server is a snap. No whining
from HYPER-V about a purported lack of memory. The machine has 2GB of main memory and nothing much running on it besides HYPER-V. This situation is, of course, all my fault.
MARK D ROCKMANHi Sir ,
Personally , 2 GB for 2012R2 host and a windows8.1 VM is a little low .
Also the memory consumption is different between 2012R2 and 2008 .
I would suggest you run RAMmap.exe to check the free space , then you may see how many RAM can be used :
http://technet.microsoft.com/en-us/sysinternals/ff700229.aspx
By the way , win8.1 is not in the
supported guest OS list of 2008 hyper-v server .
Best Regards
Elton JI
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How do I get the RSS Feed to work when loading onto server other than .mac?
Does anyone have any knowledge of this? I am uploading a site created in iWeb on to a Media Temple which of course, disables many key functions in iWeb. One thing it supposedly doesn't disable though, is the RSS Feed, provided you input the proper URL when publishing the site. However, after nearly 20 tries with as many variations on the url as I could think of, nothing seems to work. Anyone have any insight? Many thanks in advance.
It takes two things...
1. Entering the correct base URL in the Publish to Folder window, and...
2. Uploading the correct files to your server
Number 1
When you select "Publish to Folder", there should be a little text field where you are asked to enter in a URL. What you need to enter here is the base URL for your site, and in most cases this is simply your domain name: http://www.yourdomain.com That's it. Nothing more. iWeb will then take this URL base and generate a functioning RSS feed URL.
Number2
When you select "Publish to Folder", you are asked to specify a folder INTO which iWeb will save the files necessary for the functioning of your site. You will need to upload only the CONTENTS of this specified folder, which includes only TWO items: an index.html file & your sitefolder. You must upload only these two items to your server WITHOUT the enclosing folder (the one you told iWeb to publish into.
If you satisfy the above two conditions (and only if you satisfy these two conditions), then you will end up with a functioning, automatically generated RSS feed from iWeb on your own server. There are other ways of achieving this endpoint (a functioning RSS feed), but this is the ONLY way to get iWeb to do all the work for you. -
Getting kicked off of VNC connection when logging into server
We have noticed that when we log into the VNC server, and sign into the console of the server, that we get kicked off of the VNC connection. If we wait a few seconds then connect again we get the desktop of the server.
What is causing this? I use JollysFastVNC 0.98.50 (928701) and a coworker of mine uses ChickenoftheVNC, both are on Macs. It is very annoying. I do like that when I'm done and I log off of the console that it also logs me out of the VNC connection. But kicking me out for logging in is absurd.
Thanks,
Ben
PS. The server is Mac OS X 10.6.1 on a Mac Mini last generation, since they just came out with a new one.I linked to the free client. That is what runs on the computer that you you turn on in System Preferences --> Sharing, so you are going to want to install that on the server, not the machine you are connecting from. If you installed it on both it doesn't matter—it was there anyway as part of the OS. It is built into the OS, but a reinstall can fix problems and makes sure you have the latest version. The ARD application is what you would use to connect with from the machine you are sitting in front of. That is what costs money. Apple calling the software "client" can be confusing.
Have you turned on the VNC option under either Screen Sharing or Remote Management. You will need that to connect with a third party VNC app like JollysFastVNC or Tight. If you don't turn that on then the built in Screen Sharing app should just work (accessible from Safari or the Connect to Server dialog in finder by typing vnc://ipofserver)
It is hard to say if this is a SL bug, or a problem on your network since you only have one machine to test. You could try running Vine Server on your server. You will want to change it's port to something else like 5901, or at least turn off Screen Sharing so it doesn't conflict ports. If you change the port you would connect by typing vnc://ipofserver:5901
In Vine be sure to use System Server (under Server menu) to keep vine running all the time, even after a reboot.
Vine:
http://www.macupdate.com/info.php/id/11283/vine-server-%26-viewer -
As you can see the operating system is well out of date. This has been an ongoing issue for quite some time. Any help would be appreciated. Would going to an Apple store for hands-on help, be the best solution??
Sounds like you might need to take it to an Apple Store but if it is an iPhone 3G it would no longer be under warranty.
Looking at the Apple Store online you can get an iPhone 3GS from $49 on AT&T if it comes to having to get a new one. Your other option is second hand. -
A fatal error occurred during a windows server backup snap-in operation;
Unable to get windows server backup to work, I believe it was running fine not too long ago.
getting the following errors in the event log;
Faulting application name: wbengine.exe, version: 6.3.9600.17415, time stamp: 0x54504543
Faulting module name: wbengine.exe, version: 6.3.9600.17415, time stamp: 0x54504543
Exception code: 0xc0000005
Fault offset: 0x000000000011e4d7
Faulting process id: 0x1a20
Faulting application start time: 0x01d01a1b546c5049
Faulting application path: C:\Windows\system32\wbengine.exe
Faulting module path: C:\Windows\system32\wbengine.exe
Report Id: 99e58796-860e-11e4-80c4-40167e73010e
Faulting package full name:
Faulting package-relative application ID:
and
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: wbengine.exe
P2: 6.3.9600.17415
P3: 54504543
P4: wbengine.exe
P5: 6.3.9600.17415
P6: 54504543
P7: c0000005
P8: 000000000011e4d7
P9:
P10:
Attached files:
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_wbengine.exe_a2f5333556c4387ec0eb41803df32b5ef88b1de_6e4602a0_1b3ef3fb
Analysis symbol:
Rechecking for solution: 0
Report Id: 8a7a7549-860e-11e4-80c4-40167e73010e
Report Status: 0
Hashed bucket:Hi,
It seems that there is an error accessing the catalog. You could run the "wbadmin delete catalog" to delete the catalog to resolve the issue.
For more detailed information, please refer to the thread below:
Windows Server 2k8 Backup Errors
https://social.technet.microsoft.com/Forums/windowsserver/en-US/9051f767-2e25-44f9-a4cf-d49f75513da6/windows-server-2k8-backup-errors?forum=winservergen
Please note: The command "wbadmin delete catalog" will remove all backups existed on your server.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Windows Server 2k8 Backup Errors
Running WS2k8 x64 RTM. Running IIS, Sharepoint, SQL 2005 and WMS roles. When I first setup the server, the Backup utility ran fine using either form of VSS. Now when I run Windows Backup it abends with a fatal error.
The Windows logs reports:
Log Name: Application
Source: Application Error
Date: 3/22/2008 5:32:53 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: WS8-1.mydomain.com
Description:
Faulting application wbengine.exe, version 6.0.6001.18000, time stamp 0x479191b2, faulting module wbengine.exe, version 6.0.6001.18000, time stamp 0x479191b2, exception code 0xc0000005, fault offset 0x0000000000029ad7, process id 0xe88, application start time 0x01c88c7d54508b64.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2008-03-23T00:32:53.000Z" />
<EventRecordID>8704</EventRecordID>
<Channel>Application</Channel>
<Computer>WS8-1.mydomain.com</Computer>
<Security />
</System>
<EventData>
<Data>wbengine.exe</Data>
<Data>6.0.6001.18000</Data>
<Data>479191b2</Data>
<Data>wbengine.exe</Data>
<Data>6.0.6001.18000</Data>
<Data>479191b2</Data>
<Data>c0000005</Data>
<Data>0000000000029ad7</Data>
<Data>e88</Data>
<Data>01c88c7d54508b64</Data>
</EventData>
</Event>
I have tried researching the error with no luck. I haven't found any other log file with additional detail.
At times running Backup after a reboot works. Otherwise I have to uninstall the feature, reboot, and reinstall the backup feature to make things work.
Any thoughts as to that the root cause may be will be appreciated.
PeterHi,
The error message indicates this is in regard to Block Level Backup Engine service(wbengine.exe).This service comes into use when you use the Vista Backup and Restore Center to perform a Complete PC Backup.
Additionally, the error code '0xC0000005' is mainly generated by an illegal "memory access violation". This can be caused from a faulty RAM, such as an incorrect/corrupt device driver, third-party software, anti-malware software and so on. So this issue is associated with the current system state.
I suspect due to some drivers or third-party software, when Backup Engine server is running, this error occurred. However, after rebooting the system, the system state is changed and the factors that lead to this error was removed , so Block Level Backup Engine service works well.
I hope this helps.
Best wishes
Morgan Che
-
Not working properly Computer Browser service in Windows Server 2012
Good afternoon.
Migrated from 2003 to 2012 Active Directory, all is good, but the service Computer Browser in Windows Server 2012 is not working properly.
Online, there are several hundred computers, one network, no segments. PDC is the Master Browser, it is in my list of all the computers, but gives customers or Backup Browser computers only part, and in alphabetical order, giving the first 70 computers and
all.
Looked packet sniffer:
Microsoft Windows Lanman Remote API Protocol
Entry Count: 70
Available Entries: 251
So on Master Browser shows 251 computer, and the client 70.
If disabled on Windows Server 2012 Service Computer Browser, Master Browser is a computer running Windows Server 2003. He gives all computers.
What is the problem, how to get Windows Server 2012 to work correctly as a Master Browser?More info. I have high lighted in bold where the issue is. This is a massive headache for me at the moment
Frame: Number = 377, Captured Frame Length = 182, MediaType = ETHERNET
- Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-13-72-52-6E-A1],SourceAddress:[00-1E-0B-2B-68-DD]
- DestinationAddress: Dell Inc. 526EA1 [00-13-72-52-6E-A1]
Rsv: (000000..)
UL: (......0.) Universally Administered Address
IG: (.......0) Individual address (unicast)
- SourceAddress: 001E0B 2B68DD [00-1E-0B-2B-68-DD]
Rsv: (000000..)
UL: (......0.) Universally Administered Address
IG: (.......0) Individual address (unicast)
EthernetType: Internet IP (IPv4), 2048(0x800)
- Ipv4: Src = 10.44.46.101, Dest = 10.44.44.14, Next Protocol = TCP, Packet ID = 14025, Total IP Length = 168
- Versions: IPv4, Internet Protocol; Header Length = 20
Version: (0100....) IPv4, Internet Protocol
HeaderLength: (....0101) 20 bytes (0x5)
- DifferentiatedServicesField: DSCP: 0, ECN: 0
DSCP: (000000..) Differentiated services codepoint 0
ECT: (......0.) ECN-Capable Transport not set
CE: (.......0) ECN-CE not set
TotalLength: 168 (0xA8)
Identification: 14025 (0x36C9)
- FragmentFlags: 16384 (0x4000)
Reserved: (0...............)
DF: (.1..............) Do not fragment
MF: (..0.............) This is the last fragment
Offset: (...0000000000000) 0
TimeToLive: 128 (0x80)
NextProtocol: TCP, 6(0x6)
Checksum: 0 (0x0)
SourceAddress: 10.44.46.101
DestinationAddress: 10.44.44.14
- Tcp: Flags=...AP..., SrcPort=65372, DstPort=NETBIOS Session Service(139), PayloadLen=128, Seq=1910965363 - 1910965491, Ack=580319796, Win=252 (scale factor 0x8) = 64512
SrcPort: 65372
DstPort: NETBIOS Session Service(139)
SequenceNumber: 1910965363 (0x71E70473)
AcknowledgementNumber: 580319796 (0x2296FA34)
- DataOffset: 80 (0x50)
DataOffset: (0101....) 20 bytes
Reserved: (....000.)
NS: (.......0) Nonce Sum not significant
- Flags: ...AP...
CWR: (0.......) CWR not significant
ECE: (.0......) ECN-Echo not significant
Urgent: (..0.....) Not Urgent Data
Ack: (...1....) Acknowledgement field significant
Push: (....1...) Push Function
Reset: (.....0..) No Reset
Syn: (......0.) Not Synchronize sequence numbers
Fin: (.......0) Not End of data
Window: 252 (scale factor 0x8) = 64512
Checksum: 0x6F65, Disregarded
UrgentPointer: 0 (0x0)
TCPPayload: SourcePort = 65372, DestinationPort = 139
- Nbtss: SESSION MESSAGE, Length =124
PacketType: SESSION MESSAGE, 0(0x00)
- Flags: Add 0 to Length
Reserved: (0000000.)
Extension: (.......0)Add 0 to Length
Length: 124(0x7C)
- SMB: C; Transaction, Remote Administration Protocol, FileName = \PIPE\LANMAN
Protocol: SMB
Command: Transaction 37(0x25)
- NTStatus: 0x0, Facility = FACILITY_SYSTEM, Severity = STATUS_SEVERITY_SUCCESS, Code = (0) STATUS_SUCCESS
Code: (................0000000000000000) (0) STATUS_SUCCESS
Facility: (...0000000000000................) FACILITY_SYSTEM
Customer: (..0.............................) NOT Customer Defined
Severity: (00..............................) STATUS_SEVERITY_SUCCESS
- SMBHeader: Command, TID: 0x2001, PID: 0x276C, UID: 0x3801, MID: 0x0140
- Flags: 24 (0x18)
LockAndRead: (.......0) LOCK_AND_READ and WRITE_AND_UNLOCK NOT supported (Obsolete) (SMB_FLAGS_LOCK_AND_READ_OK)
NoAck: (......0.) An ACK response is needed (SMB_FLAGS_SEND_NO_ACK[only applicable when SMB transport is NetBIOS over IPX])
Reserved_bit2: (.....0..) Reserved (Must Be Zero)
CaseInsensitive: (....1...) SMB paths are case-insensitive (SMB_FLAGS_CASE_INSENSITIVE)
Canonicalized: (...1....) Canonicalized File and pathnames (Obsolete) (SMB_FLAGS_CANONICALIZED_PATHS)
Oplock: (..0.....) Oplocks NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK)
OplockNotify: (.0......) Notifications NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK_NOTIFY_ANY)
FromServer: (0.......) Command - SMB is being sent from the client (SMB_FLAGS_SERVER_TO_REDIR)
- Flags2: 51207 (0xC807)
KnowsLongFiles: (...............1) Understands Long File Names (SMB_FLAGS2_KNOWS_LONG_NAMES)
KnowsEas: (..............1.) Understands extended attributes (SMB_FLAGS2_KNOWS_EAS)
SmbSecuritySignature: (.............1..) Security signatures enabled (SMB_FLAGS2_SMB_SECURITY_SIGNATURE)
Compressed: (............0...) Compression Disabled for REQ_NT_WRITE_ANDX and RESP_READ_ANDX (SMB_FLAGS2_COMPRESSED)
SecuritySignatureRequired: (...........0....) Security Signatures are NOT required (SMB_FLAGS2_SMB_SECURITY_SIGNATURE_REQUIRED)
Reserved_bit5: (..........0.....) Reserved (Must Be Zero)
IsLongName: (.........0......) DO NOT use Long File Names (SMB_FLAGS2_IS_LONG_NAME)
Reserved_bits7_9: (......000.......) Reserved (Must Be Zero)
ReparsePath: (.....0..........) NOT a Reparse path (SMB_FLAGS2_REPARSE_PATH)
ExtendedSecurity: (....1...........) Aware of extended security (SMB_FLAGS2_EXTENDED_SECURITY)
Dfs: (...0............) NO DFS namespace (SMB_FLAGS2_DFS)
Paging: (..0.............) Read operation will NOT be permitted unless user has permission (NO Paging IO) (SMB_FLAGS2_PAGING_IO)
NTStatus: (.1..............) Using 32-bit NT status error codes (SMB_FLAGS2_NT_STATUS)
Unicode: (1...............) Using UNICODE strings (SMB_FLAGS2_UNICODE)
PIDHigh: 0 (0x0)
SecuritySignature: 0x0
Unused: 0 (0x0)
TreeID: 8193 (0x2001)
ProcessID: 10092 (0x276C)
UserID: 14337 (0x3801)
MultiplexID: 320 (0x140)
- CTransaction:
WordCount: 14 (0xE)
TotalParameterCount: 32 (0x20)
TotalDataCount: 0 (0x0)
MaxParameterCount: 8 (0x8)
MaxDataCount: 4200 (0x1068)
MaxSetupCount: 0 (0x0)
Reserved: 0 (0x0)
- Flags: Do NOT disconnect TID
Disconnect: (...............0) Do NOT disconnect TID
NoResponse: (..............0.) Server response to the client
Reserved: (00000000000000..) Reserved
Timeout: 5000 milli sec(s)
Reserved2: 0 (0x0)
ParameterCount: 32 (0x20)
ParameterOffset: 92 (0x5C)
DataCount: 0 (0x0)
DataOffset: 0 (0x0)
SetupCount: 0 (0x0)
Reserved3: 0 (0x0)
ByteCount: 61 (0x3D)
- RemoteAPIBuffer:
- FileName: \PIPE\LANMAN
- Align: 1 Bytes
AlignBytes: Binary Large Object (1 Bytes)
Name: \PIPE\LANMAN
Pad1: Binary Large Object (2 Bytes)
- RAPRequest: NetServerEnum2 Request, InfoLevel = 1, SV_TYPE_ALL: All in NSNET
RAPOpcode: NetServerEnum2
- ParameterDescriptor: WrLehDz; 4 send, 1 receive parameter
Param: (W) WORD (send parameter, 16 bit integer)
Param: (r) Receive buffer (format in data descriptor) (receive data, 0 bit integer)
Param: (L) Receive buffer length (send/receive parameter, 16/16 bit integer)
Param: (e) Entries read (receive data, 0 bit integer)
Param: (h) WORD (receive parameter, 16 bit integer)
Param: (D) DWORD (send parameter, 32 bit integer)
Param: (z) ASCIIZ (send parameter, 8 bit integer)
Param: ASCII NUL (string terminator)
- DataDescriptor: B16BBDz; data bytes send: 0, receive: 34
- Datum: (B) BYTE[16] (receive data, 8 bit integer)
Datum: (B) BYTE (receive data, 8 bit integer)
Digit: 1
Digit: 6
Datum: (B) BYTE (receive data, 8 bit integer)
Datum: (B) BYTE (receive data, 8 bit integer)
Datum: (D) DWORD (receive data, 32 bit integer)
Datum: (z) ASCIIZ* (receive data offset, 32 bit integer)
Datum: ASCII NUL (string terminator)
- NetServerEnum2: SV_TYPE_ALL: All in NSNET
InfoLevel: (1) SERVER_INFO_1
ReceiveBufferSize: 4200 (0x1068)
- ServerType: SV_TYPE_ALL: All
Workstation: (...............................1) All workstations
Server: (..............................1.) All computers with the server service running
Sqlserver: (.............................1..) All running Microsoft SQL Server
DomainCtrl: (............................1...) All primary domain controllers
DomainBakctrl: (...........................1....) All backup domain controllers
TimeSource: (..........................1.....) All Time servers
AFP: (.........................1......) All Apple File Protocol servers
Novell: (........................1.......) All Novell servers
DomainMember: (.......................1........) All LAN Manager 2.x domain members
PrintqServer: (......................1.........) All print servers
DialinServer: (.....................1..........) All dial-in servers
ServerUnix: (....................1...........) All Unix/Xenix servers
NT: (...................1............) All Windows NT workstations or servers
WFW: (..................1.............) All Windows for Workgroups servers
ServerMFPN: (.................1..............) All Microsoft File and Print for NetWare servers
ServerNT: (................1...............) All non-domain controller servers
PotentialBrowser: (...............1................) All servers that can run the browser service
BackupBrowser: (..............1.................) All backup browsers
MasterBrowser: (.............1..................) All master browsers
DomainMaster: (............1...................) All domain master browsers
Reserved1: (..........11....................)
Windows: (.........1......................) All Windows 95 or later
DFS: (........1.......................) All DFS root servers
ClusterNT: (.......1........................) All NT Clusters
Terminalserver: (......1.........................) All Terminal Servers
ClusterVSNT: (.....1..........................) All NT Cluster Virtual Server Names
DCE: (....1...........................) AllIBM DSS (Directory & Security Services)
Reserved2: (...1............................)
AlternateXport: (..1.............................) Return list for alternate transport
LocalListOnly: (.1..............................) Return local list only
DomainEnum: (1...............................) Enumerate primary domain
Domain: NSNET
Then the reply;
Frame: Number = 378, Captured Frame Length = 1514, MediaType = ETHERNET
+ Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-1E-0B-2B-68-DD],SourceAddress:[00-13-72-52-6E-A1]
+ Ipv4: Src = 10.44.44.14, Dest = 10.44.46.101, Next Protocol = TCP, Packet ID = 27036, Total IP Length = 1500
+ Tcp: Flags=...A...., SrcPort=NETBIOS Session Service(139), DstPort=65372, PayloadLen=1460, Seq=580319796 - 580321256, Ack=1910965491, Win=253 (scale factor 0x8) = 64768
+ Nbtss: SESSION MESSAGE, Length =2013
+ SMB: R; Transaction, Remote Administration Protocol
- RAPResponse: NetServerEnum2 Response, Count = 31
Win32ErrorCode: 0x00000000 - ERROR_SUCCESS - The operation completed successfully.
Converter: 2251 (0x8CB)
- NetServerEnum2: Count = 31
EntriesReturned: 31 (0x1F)
EntriesAvailable: 31 (0x1F)
+ NetServerInfo1: APOLLO
+ NetServerInfo1: ARTEMIS
+ NetServerInfo1: ASKLEPIOS
+ NetServerInfo1: CASTOR
+ NetServerInfo1: DCC4503-131L
+ NetServerInfo1: DCC4503-155L
+ NetServerInfo1: DCC4503-157L
+ NetServerInfo1: DCC4503-161L
+ NetServerInfo1: DCC4503-171L
+ NetServerInfo1: DCC4503-172L
+ NetServerInfo1: DCC4503-175L
+ NetServerInfo1: DCC4503-177L
+ NetServerInfo1: DCC4503-183L
+ NetServerInfo1: DCC4503-184L
+ NetServerInfo1: DCC4503-185L
+ NetServerInfo1: DCC4503-188L
+ NetServerInfo1: DCC4503-196L
+ NetServerInfo1: DCC4503-197L
+ NetServerInfo1: DCC4503-199L
+ NetServerInfo1: DCC4503-202L
+ NetServerInfo1: DCC4503-203L
+ NetServerInfo1: DCC4503-205L
+ NetServerInfo1: DCC4503-210L
+ NetServerInfo1: DCC4503-213L
+ NetServerInfo1: DCC4503-219L
+ NetServerInfo1: DCC4503-220L
+ NetServerInfo1: DCC4503-228L
+ NetServerInfo1: DCC4503-233L
+ NetServerInfo1: DCC4503-234L
+ NetServerInfo1: DCC4503-236L
+ NetServerInfo1: DCC4503-241L
StringData: Binary Large Object (586 Bytes) -
Windows Server 2008 R2 issues on OVS 3
I've been trying to get Windows Server 2008 R2 to work on OVS3 and been having issues.
First I tried to copy a working VM from OVS2 and it seemed to work, but it would crash whenever intensive I/O happened. I installed the OVS3 PVM drivers, hoping that would fix it, but it didn't. I moved it over to another server, thinking maybe it was a hardware issue. No luck there.
I also tried a fresh install. It boots up and when it starts to unpack the install files the VM reboots. I tried this with an NFS repository and on local disk with the same result.
Has anyone successfully installed Win2K8 Server on OVM3? Any ideas?
Thanks,
JimBoth Mem and Max Mem were set to 2048 mb, so I figured it was fine. But I changed them both to 4096 mb and now it's working. Odd.
Both the copied VM and the fresh install are working.
Thanks. -
NPO wants to get windows server 2012 r2 datacenter as the main operating system and then windows server 2012 r2 essentials plus 10 windows 8.1 as virtual desktops. Each desktop for one remote user running office 2013. Is there a better configuration?
In either case what licenses does the NPO need to purchase?
BobHi,
For license related questions we recommend you contact Microsoft licensing specialist.
http://support.microsoft.com/kb/141850/en-us
Regards.
Vivian Wang -
Hard drive upgrade on Windows Server 2008
I have 2 servers with similar issues. One is an HP Proliant DL380 G7 with 4 72GB hard drives running RAID5. I replaced each drive, one at a time, with 146 GB hard drive. I ran HP's Array Configuration Utility which showed the correct
new volume size after the array was rebuilt and parity re-initialized. When looking at the drive in Computer, it shows the old size. How can I get Windows Server 2008 to recognize the new size for the logical drive? I have a similar issue
with another DL380 G7. This one has 2 mirrored 72GB drives that I replaced one at a time with 300 GB drives. The HP Array Configuration Utility sees the new size but, Windows does not. Any suggestions would be appreciated.This one may help.
http://blogs.technet.com/b/mghazai/archive/2009/02/24/extend-system-boot-volume-on-windows-server-2008-windows-vista-win7-beta.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Windows Server 2008 x64 on Bootcamp: Ethernet drivers missing/not working
Hello folks,
at the moment I try to get Windows Server 2008 x64 running on a new Mac Pro (Early 2009).
Installation of Windows Server 2008 x64 (Enterprise) worked out of the box. However, the ethernet drivers do not work. Ethernet cards are not detected and working due to missing drivers.
I have tried several different Intel driver packages. All of them report "No intel card found.". However, the vendor ID of the ethernet card clearly points to Intel.
I have not been able to find a driver yet, does anyone have an idea?
E.g. does someone know the exact chip name? The driver "name"? Anything else?
Thank you in advance,
StefanErik - Thanks for the info!
I use 64-bit applications ... some notes on why:
enterprise supports up to 32GB of memory so the argument to use x64 for memory support is nullified.
... that's not correct. x64 windows versions allow 64-bit addressing, so 64-bit applications created for x64 windows can take advantage of large amounts of cheap RAM as 32-bit applications cannot. 32-bit applications (they are all 32-bit applications in a 32-bit Windows version, even in Server 2008) are restricted to a limited process space of at most 2 GB.
It's true there is a LARGEADDRESSAWARE kludge to enable limited use of up to 3 GB by a user process (and there is an equivalent to this in Server 2008), but this has gone nowhere because it is far more straightforward and more productive for an applications developer to simply go 64-bit rather than invest any engineering resources into a one-of-a-kind kludge for an era that is already past.
Yes, it is true that if you are stuck running 32-bit applications you have less incentive to use x64 windows. But going true 64-bit is a huge advantage in reliability and performance. Given the very low cost of RAM in modern times it makes sense to do so, even in notebook settings that are often limited to only 4 GB of RAM. 64-bit applications in Windows tend to have decisive performance and reliability advantages so whenever one competitor in a given segment makes the jump to 64-bit pretty much all of them must do so. -
I keep getting ' user not register for online ' when trying to get track names for my CD imports for Windows 7 and I'm unable to find a solution.
I can't be certain exactly which steps are going to be needed in each case, but if you work through this in sequence hopefully one of the steps will prove effective.
First try this:
With iTunes closed.
Press the WinLogoKey+R
Type in %appdata% and press return
Double click on Apple Computer
Double click on iTunes
Delete the file CD Info.cidb
Start iTunes and try again.
If that doesn't work close iTunes and try deleting com.apple.iTunes.Gracenote.plist in the same folder.
If that doesn't work close iTunes and try deleting iTunesPrefs.xml. This will reset your some of your preferences in iTunes so be sure to check them and reset as required.
If that still hasn't resolved things close iTunes and try deleting the entire %appdata%\Apple Computer folder or look for parallel files/folders in the C:\Users\<User>\AppData\Local or C:\Users\<User>\AppData\LocalLow in case a corrupt file is persisting there.
Note that any iOS device backups are stored in the MobileSync folder within Apple Computer. Once things are working you should backup your devices again as soon as possible.
Or it might not be the preference files after all...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
Maybe you are looking for
-
IMPORT DATA -- EXCEL not working
Hello Friends, I am trying to import excel data into an oracle database file. I choose all columns and then when I click 'INSERT', I get the following message: Excel Import Selection Error No columns selected for insert Could anyone help me in findin
-
OC4J crash: ConcurrentReaderHashMap$HashIterator.hasNext
I use OC4J-standalone 10.1.3.3 and Java 1.6 update 22. Almost everyday OC4J crashes and a hs*.log file is produced with the following contents underneath. # A fatal error has been detected by the Java Runtime Environment: # EXCEPTION_ACCESS_VIOLATION
-
What year was MacPro3,1 created
Can I update this Mac Pro to Mt Lion?
-
I cannot open files with Adobe Reader XI on my windows 7
Please help. I am not able to open or attach PDF files on my windows 7 machine
-
Hi , I am reversing SAP ERP table. I have ODI 10.1.3.6.4_02. After selecting table i click reverse and check status in Operator. The SetMetaData step stays in Running state. It is around 8 hrs now and it's still in Running State. This is the first ti