Getting 6120 to vibrate for SMS but not for incomi...

Is there any way of getting the 6120 classic to vibrate for SMS messages, but not for incoming calls? I would like only to be notified by a vibration if a SMS message is received in order to be able to be contacted in an emergency.

your right there pal its not
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • TS3274 Getting sound for music, but not for game apps.  Checked settings and sound is on.  Any suggestions.

    My volume controls work and getting sound for music but not for game apps.  I did check settings and sound is turned on under notifications and in the app.  Any help would be appreciated

    Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't controlled via the side switch is controlled via control centre instead : http://support.apple.com/kb/HT4085

  • Table of Contents page numbers works for PDF but not for other formats

    Hi,
    I followed exactly was indicated here regarding creation of TOC.
    http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/T421739T481157.htm
    The page numbers generated correctly for PDF but not for RTF, HTML and XLS.
    (HTML and XLS are understandably not paginated in nature but why not in RTF?)
    Tried to make the simplest example work, with 2 headings each on a separate page. Doesn't work on either MSWord 2003 or 2007.
    What am I doing wrong?
    Regards,
    Jarell
    Edited by: Jarell on Jan 11, 2012 8:08 PM

    Hi Kavipriya,
    What is your email address? I have attached a file in Oracle Metalink, under SR 3-5172030861. named test_toc.rtf
    You may use any xml because the template does not use any dynamic binding of values.
    The template is basically 2 pages, the TOC in the 1st page. First TOC item (Heading 1) is in Page 1, and Second TOC item is in Page 2.
    So the end result should be (PDF result from BI Publisher):
    First TOC Item .................. 1
    Second TOC Item ............. 2
    But for RTF it outputs:
    First TOC Item .................. 0
    Second TOC Item ............. 0
    And after doing Print Preview (once or twice)
    First TOC Item .................. Error in Bookmark
    Second TOC Item ............. Error in Bookmark
    Hope this is detailed enough to illustrate the problem.
    Edited by: Jarell on Jan 17, 2012 10:24 PM

  • How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

    How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

    Hello,
    I apologize for submitting this question.  Soon after I posted it I saw a similar question that had my answer..
    Again, my bad for not looking first.
    Ron Morris

  • Password works for login but not for the Adobe CC Desktop application

    Password works for login but not for the Adobe CC Desktop application

    Please refer to http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
    ou can try deleting OPM.DB from steps below and try again.
    Mac OS: You can locate the OPM.db file in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion. - http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html
    Windows: You can locate the OPM.db file in the :\Users\\AppData\Local\Adobe\OOBE folder.  To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7. -http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-ex tensions.html
    3) update to the latest version of the Creative Cloud app.
    Also we would like few more details:
    When has this issue started occurring, was this after installation of any specific adobe product.
    On which platform are you seeing this.
    Also we would like to know if after above steps this issue occurs ever again in future.
    You can refer to http://forums.adobe.com/thread/1239510
    Regards,
    Rajshree

  • Block G/L Account  for posting but not for parking

    Hi all,
    is there a possibility to customize a G/L account in a way that it is blocked for posting but not blocked for parking?
    Kind regards,
    Georg

    Hi Georg-Stefan,
    Directly, you cannot define such a thing. G/L blocking works on every posting level.
    You can try, though, to pull a trick with a validation (OB28) checking on the BKPF-BSTAT field if it's not V - then block the posting. The prerequisites will be the G/L accounts, which can be organized in sets for better maintenance.
    Regards,
    Eli

  • ISync works for iCal but not for Address Book

    Another lost soul. Can anybody suggest where I should start looking for the problem.
    I've just successfully modified my iSync so that it sees my brand new Nokia 6300. I have got the phone and my iMac to sync my calendar, but absolutely zero activity on the contacts front.
    Looking at the message on my Nokia, the Synchronisation Info message records changes to the Calendar but makes no mention of the Contacts. It is as if I've switched off the requirement to sync these somewhere.
    Any ideas for where to look?
    Frances

    I followed the instructions on http://kaspers.freeflux.net/blog/archive/2007/04/13/how-to-isync-a-nokia-6300.ht ml , including simply replacing my MetaClasses.plist with his. The site blog shows this worked for lots of people, but not for me
    Over the years I have found these Apple Discussion lists a very useful source of help, but I don't think I have ever come across a list with so many frantic pleas for help as this! ISync is a wonderful Idea, but it seems that it is far from plain sailing to implement.

  • Router works for desktop, but not for surrounding laptops.

    The router I have is the Linksys E1000. I bought it and hooked it up yesterday and works great for my desktop but not for my daughters laptop. Her laptop has wireless automatic internet recognitions which allows her to pick up surrounding internet networks. We cannot figure out how to make this work. Please help!

    Are you able to see your router's network  name on your laptop? If yes, then follow the below mentioned settings.
    Click Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Networks, here remove all the networks present and close the Window...
    Click on Connect to a Network and try to re-connect to your Network, it should ask for your Network Key/Password, enter the correct password/network key and click Connect...
    It should connect...Once you are connected you should restart the computer, it should connect to Internet...

  • Linked server works for sa but not for user

    I have a linked server to an Oracle database. It works fine for me logged in as DBA but not for the user. The linked server uses the same account regardless of who's using it.
    When the user tries it the following error is thrown:
    Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server
    I have granted public access to MSDB and execute on the xp_prop_oledb_provider object to the user.

    this link should give all the connection string to sql server
    http://www.connectionstrings.com/sql-server/
    but can you verify if your application is really using that connection file ? try running trace alongside and try to connect to the database.. so do you atleast see  a call from this config file with username - myapplication??
    Hope it Helps!!

  • Can I have auto adjust for RAW, but not for JPEG?

    I want auto adjust for RAW files, but NOT for JPEGs. I generate JPEGs from my adjusted RAWs and the last thing I want Bridge/ACR to do is to auto-adjust the generated JPEGs just because I looked at them in Bridge. Yet, I've been using auto-adjust on my RAW files for years and find it a useful starting point.
    Is there any way to configure ACR 4 to do auto-adjust on RAW files, but not on JPEG files?

    Anyone have any advice on this question? I like auto-adjust on RAW files. I like the idea of using ACR capabilities on some JPEGs, but letting ACR do auto-adjust on JPEGs that I generated from hand-tweaked RAW files just ruins the JPEGs completely. Thus, I'd like auto-adjust on RAWs, but not on JPEGs. Is there any way to do this?

  • Office Web App - Use for viewing but not for editing

    Hello,
    i'm searching for a possibility to use the web app server only for viewing documents but not for editing.
    I want to accomplish this for docs and ppts.
    So the possibility to edit in Web App should be greyed out or even better, vanish completely.
    Best regards
    Stephan

    You can remove the bindings for OWA for some actions.
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/34948782-74cb-452c-af32-af260a7f988a/document-library-new-document-office-web-apps-server?forum=sharepointgeneral

  • Disable Control Panel for users but NOT for administrators

    I'm unsure why Microsoft has not yet published this information.  I'm sure that sysadmins everywhere want more granular control of the control panel besides disabling for everyone or enabling for everyone, which is what it seems Microsoft wants me and
    you to do, disable CP for everyone, enable it every time I log on as admin and need to use it, then disable again.  Ridiculous.
    I am a consultant for a large company and our partners like to take as much control as possible.  I do too, for that matter.  Last week I began researching how to disable the control panel for everyone except admins.  I am operating under
    the assumption that non-admin accounts do not need access to control panel and it's better if they don't, especially in a production environment where the terminals the users are operating are mission critical.
    Finally, I found the answer.  I hope this helps you because it took me 3 days to finally find it.  It works.  I've tested it with admin and non-admin.  The great thing is, you can control any GP setting for non-admin users in this manner,
    not just the Control Panel.  You could disable any and all functionality not necessary for day to day operations for all your users but still maintain access to everything by logging on as an administrator.
    The question is answered here
    http://www.sevenforums.com/tutorials/101869-local-group-policies-apply-all-users-except-administrators.html

    Don:
    Sorry for the confusion.  Not sure why my link is bad and yours is good.  They both appear to be identical.
    The issue with executing gpedit.msc is that when you apply a setting, the setting is for all users, even administrators.  If I want to disable access to the control panel, I do so for admins as well when simply executing gpedit.msc, which means if I
    log in and need access to control panel, I have to enable it in GP, do the work necessary and then disable it again (if I remember) when work is complete.  A bit of a drag, especially for busy admins and support techs.  On the other hand, following
    the instructions in the link disables control panel for all users except administrators.  So if I need to work with Control Panel as an admin, I've saved the enable, disable steps and don't have to worry about remembering as well.
    I hope that clarifies.  Thanks for your feedback.
    ok, thanks. I re-read the guide one more time and now I understand the logic - it creates a LocalGPO object, when gpedit.msc is launched in this very special way. It's kind of cool, even if rather niche. (I'm assuming that it only works for LocalGP and not
    for Domain GP).
    I think your original link had a trailing dot, but it's fine now.
    Thanks for clarifying - even after all these years, I am still learning new things :)
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • X6 - vibrates on SMS but not on calls

    I've been using the Nokia X6 for a couple of days now. There's a little thing I can't seem to solve right away: my phone is always on a custom made silent profile in order to have vibrating alert but no ringtone alert. This works perfectly fine when I receive an SMS, but there is no vibration when receiving a call. Hence, there's no malfunction in the vibration or something, it does work. Am I missing some kind of setting here?
    Oh, I've read some other topics and I'm working on phone memory, not SIM memory, so that's not the problem.
    Thanks ahead!

    first back up your data then type in star hash 7370 hash and then the security code is 12345
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Built app with subpanels works for me, but not for him

    Using labview 8.6 I have successfully built several revisions of an app that has multiple subpanels.  It has successfully executed on several different hosts.   However, with the most recent version I received a report that it launches, but the sub-panels do not load.  Of course, WFM (works for me) -- the sub-panels are compiled into the app and they load just fine for me.  The other user is using the free 8.6 LabView runtime.  Again, previous app revisions have worked fine, and I don't know what is different about this build that could affect loading of the subpanels.
    On my PC I renamed the path to the source files just in case the built app was picking up some missing file directly from the original VI directory.  Still works for me.  I even monitored it with FileMon (sysinternals.com) and confirmed that it never tried to open any other file (which further confirms that all the sub-panels are successfully incorporated into the built application).
    The only other significant difference is that the app is designed for 1280x1024 screen and the other user is running on a 1024x768 laptop.  But how could that affect loading the sub-VIs?
    Does anyone have any idea what would cause a built application with subpanels to work fine on one host but not display the sub-panels on another host?
    Thanks and Best Regards,
    J.

    How are you getting the software on the other computer? Did you build an installer?
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Ftp works for start() but not for custom procedure sendFile()

    Hello,
    i'm busy building an ftp upload applet by using sun's ftp class sun.net.ftp.FtpClient and by including my applet in a signed jar.
    Now here's my problem. The code i have to ftp works fine when i put it into the applet's start() or init() procedures, but when i put the code into public void sendFile() and i call this procedure from javascript, it does call the procedure fine (i can check this by incrementing my progress bar - just for debug purposes), but seems to hang at a specific point when i try and get the length of the file (see the code). Here is the code that works in the start() procedure but not my sendFile procedure.
        public void sendFile() {
             try {
                ftpclient = new FtpClient(server);
                ftpclient.login(user, password);
                ftpclient.cd(dir);
                ftpclient.binary();
                progress.setPercentOn(true);
                byte abyte0[] = new byte[1024];
                File file1 = new File(file);
                // Applet seems to be hanging here?
                long l = file1.length();
                in = new FileInputStream(file);
                out = ftpclient.put(filename);
                long l1 = 0L;
                while(blncheck == true)
                    int i = in.read(abyte0);
                    if(i < 0) break;
                    out.write(abyte0, 0, i);
                    l1 += i;
                    long l2 = l1 * 100L;
                    long l3 = l2 / l;
                    progress.setValue(l3);
                out.close();
                in.close();
            } catch(Exception e) {
                e.printStackTrace();
    }Any idea why this code would only work in the applets start() and init() procedures?
    Help would be much appreciated
    Hagen

    Ok, the problem is with security. As soon as the html button accesses the applet, the following exception is thrown
    java.security.AccessControllException: access denied(java.io.FilePermission C:\blah.txt read)So my plan is to try and not use html but JButtons, then the signed applet shouldn't have a problem anymore

Maybe you are looking for

  • 7.3 CD Burning issue.

    [IMG]http://i5.photobucket.com/albums/y198/kameki/Untitled-1.gif[/IMG] I've been getting this error since I got 7.3. I can burn using WMP and still import using iTunes, but I can't burn any playlists.

  • Yahoo music videos do not play with v4 - rolled back to v3.6 and had no problem

    yahoo music videos do not play with v4 - rolled back to v3.6 and had no problems.

  • Project Documentation Format

    Hi SAPians, We are a bunch of SAP trainees, and have recently completed a corporate training as a final year project. We need to prepare documentation, report and presentation for project completion and degree. we have all the screen shots, theory ex

  • How to hide particular data on rows in ssrs reports ?

    Hi, i have requirement, in my ssrs report i have columns like sites,Accounts,LOBs and etc., i don't want to show some of the accounts in rows for some particular sites, please check the below image.here i don't want to show the ally finacial and fox

  • Workflow does not stop after the first reject

    Hi! We just got a 30-day Microsoft 365 trial at work in which we also received a Share site! I've been playing around with it a lot, especially to help them build an approval process. I believe since this is just a trial, I do not get the globally re