Getting a error message 6 on PSE 8 Help please?

I downloaded PSE8 to an external hard drive and now I am recieving error message 6 when I try to open on my laptop. Please help.

I believe this is a licensing error.
I don't think you can run Elements from an external hard drive. I'm pretty sure it has to be on the internal hard drive since the two allowable activations are tied to specific computers. Be aware you can only have it on two computers...activated...at one time. If you need it on a third, you'll have to deactivate it one one of the others before it'll let you use it.

Similar Messages

  • ITunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5). I have uninstalled in correct order and reinstalled but still getting same error message. Any help??

    iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5). I have uninstalled in correct order and reinstalled but still getting same error message. Any help??

    Take a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I deleted my microsoft office:mac 2011 word from my toolbar. I have Mac OS X version 10.6.8.  I tried to reinstall but it won't work. I get an error message each time. Please help!!!!!!!!!!!!!!

    I deleted my microsoft office:mac 2011 word from my toolbar. I have Mac OS X version 10.6.8.  I tried to reinstall but it won't work. This has never happened before.  I get an error message each time. Please help!!!!!!!!!!!!!!  I don't have time machine. 

    By Toolbar, do you mean the Dock?  The Translucent bar normally at the bottom of the screen, but sometimes at the right or left side?
    If that's what you mean, the Dock is merely a shortcut to what is already inside the Applications folder's Microsoft Office 2011 folder.  If you have Word inside your Microsoft Office 2011 folder, you can drag it back to the Dock.
    If you deleted the Microsoft Office folder, or it is empty, you'll have to reinstall it. 
    If you don't have your registration code, you'll have to call Microsoft for a new one.

  • I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message  Exit Code: 7 Please see specific errors below for troubleshoo

    I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message  Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR: DW041 ...   -------------------------------------- Summary --------------------------------------   - 0 fatal error(s), 1 error(s)
    ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist.  -------------------------------------------------------------------------------------  System Requirements  and it will not install, It says cant find the path D: im not sure why because as far as I can see its set to install on drive C: which is where I want it!

    Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

  • Every time I try to update Muse to 2014.3 version in my mac (OS X 10.10.2) I get this error message: "Exit Code: 39 Please see specific errors below for troubleshooting. For example,  ERROR: DW042 ...  ---- Summary   - 0 fatal error(s), 2 error(s)   ERROR

    Every time I try to update Muse to 2014.3 version in my mac (OS X 10.10.2) I get this error message: "Exit Code: 39 Please see specific errors below for troubleshooting. For example,  ERROR: DW042 ...  ---- Summary   - 0 fatal error(s), 2 error(s)   ERROR: Failed CreateAlias ERROR: DW042: ARP Entry couldn't be created for language : es_ES". I've tried both to uninstall the app and run CleanTooler, but there's no way. What else should I do?

    Davidv82268468 have you removed and reinstalled Adobe Muse using the steps listed in CC desktop lists applications as "Up to Date" when not installed?

  • Installing onto a second computer? Getting this error message: Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR: DW006 ...  -------------------------------------- Summary --------------------------------------  - 0 fa

    Hi there,
    I have just installed creative cloud on my mac laptop and am trying to download lightroom and photoshop (as a second computer) and am getting this error message
    Exit Code: 7
    Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s)
    ----------- Payload: Adobe Photoshop Lightroom 5 5.4.0.0 Adobe Photoshop Lightroom 5.pkg_5.4 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1

    See:
    Exit Code: 6, Exit Code: 7 Installation Errors -
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  • After updating to OS6, I cannot sync my photos and I get an Error Message 1140.  Help!

    After updating to OS6, I cannot sync my photos and I get an Error Message 1140.  Help!

    You can use an external drive with LR but I recommend only using it for
    image file storage while keeping your catalog on your internal HD for
    performance. If you moved files outside of LR (Finder or Explorer) you will
    have to clue LR in on where they are now. Use the left-hand folder panel in
    Library mode to navigate to the location on your external drive and use the
    find photo option get LR to reconnect them. If you moved the catalog and
    now LR can't find it you should get a window allowing you to select a new
    one where you can navigate to the new location and select it. You can also
    just start LR by clicking on the Lightroom 5 catalog.lrcat file to open it
    and start LR.

  • TS3694 I was doing the latest update (7) and when it got to exporting files it gave me error message 3194, need help please

    I was doing the latest update to my iphone4. when it got to exporting files it gave me error 3194, can anyone help?

    Error -1 is not mentioned in this article about error messages during a restore process: http://support.apple.com/kb/TS3694
    This one comes close:
    The device could not be restored. An internal error occurred, or Error 3200: This indicates a network-connectivity or traffic issue. If you see this error, wait an hour or more and try again.
    You may also check your security software settings, to make sure that iTunes can contact Apple servers during this process: iTunes for Windows: Troubleshooting security software issues

  • My itunes wont work and wont let my uninstall and then reinstall the newer version as its asking me too! i keep getting an error message!...please can someone help?

    please can someone help me to unistall itunes from my laptop control panel, this means it also wont let me install the latest version!

    I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
    I am running Yosemitie on a  iMac.
    Paul

  • Archiving on FCSvr and now major error messages...help please

    So I was archiving a bunch of stuff off to our archive device when this happened...
    *ERROR: E_FD*
    *file write error*
    *No space left on device*
    then
    *ERROR: E_FILE*
    *Unable to open file /Volumes/DroboFCSvrArchive/7/Content2/Content1/RAW Footage Library/BELUGA BIRTH ALL/Beluga Day After/swim day2.mov for writing*
    *No space left on device*
    then
    *ERROR: E_DATABASE*
    *ERROR: could not extend relation 1663/16385/16747: No space left on device*
    *HINT: Check free disk space.*
    So, drobo is our archive device. It has plenty of room. The drive that is full is our system drive. Our system drive is completely out of room. It is not a FCSvr device. I can't find anything unusual about the system drive and searches turn up nothing (not indexed I guess).
    So it looks like FCSvr was telling me that drobo was full. It's not. I can currently archive to it. But it doesn't help me understand why the system drive is full or why it was reporting that drobo had no room.
    Until a week or two ago (last time I checked) the system drive had about 50 gig remaining. It only holds apps and operating system.

    Hi,
    have you looked at /Volumes/ ? Is it possible that you have a 'dead' folder named the same way like you drobo drive in that path?
    It's possible that FCSvr tries to write to the drobo drive, yet, the folder it really writes its data into is a local folder.
    This can happen if your system crashes and for that reason doesn't unmount /Volumes/DroboFCSvrArchive properly during system shut down. Then even with the drobo drive unmounted, the folder remains.
    If then the system restarts, your drobo drive gets mounted into the path /Volumes/DroboFCSvrArchive (1) or something like that, though in Finder it looks quite normal.
    So if you find two similar folders at /Volumes/DroboFCSvrArchive, the solution would be to unmount and disconnect the drobo drive and then to move the remaining folder /Volumes/DroboFCSvrArchive to your desktop (by typing sudo mv /Volumes/DroboFCSvrArchive ~/Desktop/ in your Terminal, e.g.).
    Now reconnect your drobo drive and copy data from your desktop into FCSvr.
    Hope that helps.
    André

  • Adobe photoshop CS6.Receiving the error "could not complete your request because it is not a valid photoshop document? Tried renaming the files and had working psd files and now all psd files will not open and getting the error listed. Anyone help please?

    Could not complete your request because it is not a valid photoshop document. Tried renaming the file extensions and still no luck.

    Nobody can tell you anything without proper system info or other technical details.
    Mylenium

  • Hi i have a g56 laptop and i am getting this error message

    hi i have a g56 laptop and i am getting this error message system disabled 58347730 please help
    This question was solved.
    View Solution.

    Try entering the following code
    47025316
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I Keep getting this error message after installing elements 7

    I Keep getting this error message,-Photoshop Elements Help could not be found. Please re-install Photoshop Elements to fix this problem.

    Moving this discussion to the Photoshop Elements forum.
    Philipk91962784 what operating system are you installing Photoshop Elements on?

  • I keep getting the error message:

    I keep getting the error message:
    The MobileMe IMAP server “p01-imap.mail.me.com” is not responding. Try checking the network connection, and that the server name is correct. Otherwise, the server might be temporarily unavailable. If you continue, you might not be able to receive messages.
    I am trying to set up my mac mail.  It used to work fine and all of a sudden it stopped working.  Any suggestions as to why I cant make it work?  I have tryed deleting the account and starting again but I continue to get this error message.  Any help would be greatly appreciated.
    Best,
    Andrew

    Make sure all the settings, incoming and outgoing seervers and port numbers, are as this apple article.
    http://support.apple.com/kb/HT4864
    If they are you are one of many that have problems with the apple mac mail app where all of a sudden it just stops working.
    If that is the case I suggest you try a different mail program.

  • HT201210 Ios6 will not download I get an error message it worked fine on my iPad I have the iphone4

    I cannot update my iPhone 4 ios6 I get an error message frustrated any help appreciated

    dont do it!!! wait until apple has this all worked out!  took forever for me to get my phone to restore.  had to uninstall all antivirus software from pc andd turn off firewall.  apparently something blocks itunes to where it cant restore your phone

  • Please help--Error message in PSE 7

    When I open PSE 7 I'm getting an error message that says:
    Microsoft Visual C ++ Runtime Library
    Runtime Error Program....Adobe Photoshop, etc
    This application has requested the Runtime to terminate in an unusual way. Please contact the application support team for information.
    and a couple times the message just says Adobe Photoshop has stopped working and must close.
    When I click "okay" the entire program shuts down.
    This started about 10 days ago.  I uninstalled the program and re-installed and it worked okay.  Now today the message is back again.  I've tried unplugging everything, restarting the computer and nothing is working.   I am using Windows Vista.
    Please help.
    Thanks, Doris

    I do not know enough about my computer etc. to
    follow the troubleshooting
    information that you referenced. But  I was able to check my system
    information and everything was okay in that area.  I've been using
    the PSE 7 program for almost a year with no problem until now.  Is there some way that I can talk to
    a "real live" person to get help.   Thank you for taking time to try and help me.  I'm just not computer savvy enough to follow the instructions as given.
    Thanks,Doris

Maybe you are looking for

  • FINDER becomes UNRESPONSIVE during AppleScript runs in 10.6.5

    Has anyone experiences the Finder becoming unresponsive when running a script in Snow Leopard? We have scripts that push PDFs to an Apple Server (10.4) via SMB or AFP and while the script does run fine- during the last minute of it running, the Finde

  • IP which only allowed for PAT

    Hello, I am looking for example which allow some of the IP's belongs to INSIDE which can allow to using PAT method to access Internet. With reference to URL http://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config

  • How to setup the fax function for a AOI device

    I read in several post on this forum that people get full print/scan/FAX functionality for the supported printers. In my case, I have a HP Photosmart C7280, which is full supported using the C7200 series drivers, including a FAX driver. Now, I add a

  • TOO MUCH JUNK MAIL

    Need a little help and guidance- New Mac user should have done this a long time ago, LOVE IT!!! Question, I am using entourage for my mail, calendar etc. I am getting so much junk mail it is crazy, is there a program that is can be used to filter it

  • Can i create a large number of identical tabs?

    I have searched around and found nothing on the topic.. what i am looking at here is this. I have currently set up two tabs that are identical, each representing a component on a device and the component is selected when the user clicks on the tab. F