Getting a extra space between the line in the PDF output

I an having the rtf templete contains a table . That table contains 3 row and for the second row i have a for loop start at 1st column and end's at last column . first and 3rd row are the simple data donot have any for loop .
So in the PDF out put of the templete gives me extra blank line between the data for the 2nd row.
Example
1st row ------ Contains data field
2nd row For Each grouph data fields End for
3rd row --------- Contains data field
On the PDF output the data which is in the for loop ( 2nd row ) takes one more extra line ( space ) between the record .

I an having the rtf templete contains a table . That table contains 3 row and for the second row i have a for loop start at 1st column and end's at last column . first and 3rd row are the simple data donot have any for loop .
So in the PDF out put of the templete gives me extra blank line between the data for the 2nd row.
Example
1st row ------ Contains data field
2nd row For Each grouph data fields End for
3rd row --------- Contains data field
On the PDF output the data which is in the for loop ( 2nd row ) takes one more extra line ( space ) between the record .

Similar Messages

  • Scrollbar & extra spaces between pages.

    Hi All,
    Please provide some help on smartforms.
         We are facing following problem with smartforms, We have created a smartform having one table with dynamic content.And after this dynamic table we have some static content.Based on the no.of items, the length of the entries in the table varies.If the table entries length increased beyond the page length, then we are getting a scrollbar in the page in which this table is displayed.
    We had maintained the page length to the maximum.
        And we are also getting some extra spaces between each static content of the smartform.
    Regards
    Veena.

    i already set the margins to the exact limits of the frames.,
    have a question:
    i have a big non repeating (a lot of repeating and no repeating frame inside.,print object 1st page) in the top of my main section and have a small repeating frame below it (print object last page.,)
    does the small repeating frame causes the space? or it doesn't?

  • Why is there a thin dark line between two of my three cover images that wasn't there before?  When I delete the images, you can tell that there is extra space between the first two image boxes.

    Getting ready to purchase my first book, I looked over everything once more and noticed that there is now a thin gray line between the first two of my three cover images.  I believe this may have happened when I switched out the left image.  When I delete the images, you can see an extra space between the center and left image boxes.  How can I fix this without starting over?

    What size book? Are you previewing this way -
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    LN

  • How to get rid of an extra space between news items in news module

    My home page is www.turbocam.com. Notice on the left side that there is an extra space between news item 1 and 2.  Between news item 2 and 3 the spacing is normal. I haven't touched the template. Any thoughts as to why this is occuring? The module is listed as:
    {module_announcement,l,3}
    Thanks.
    Liz Dorsett
    Turbocam

    Never mind! I figured it out. I had break tags outside the div tag!

  • Firefox web pages often print with many extra spaces between letters, making the printout illegible and useless..

    When I try to print e-mails in Thunderbird and web pages in Firefox, the individual letters usually print (either to my laser printer or to Acrobat Distiller) with many spaces between each letter, making the printout nearly illegible and useless. Any thoughts? And settings that would correct this? (I never had this problem before the last few months, using earlier versions of Firefox and Thunderbird.

    about:config has many listings for each of my printers, but instead of starting with "print.print_printer" [naming the printer], most listings that name a printer start with "print_printer" or simply printer_[printer name]. I don't want to reset all the listings, not knowing beforehand if that would be advisable.

  • I keep losing the line at the top of the page which includes "file,edit veiw,bookmarks,history,help etc" I can get it back by pressing lt+F8 but it goes again when i press another key.how can I restore this permanently

    I have lsot the line in the toolbar spaces which include "file,edie,veiw,bookmarks,history,help"etc.Ican get it back by pressing Alt+F8 but it goes when I press any other key.How can I restore this permanently

    Thanks for the information, is this a windows 7 problem?

  • How can I put extra spaces between hyperlinks?

    After I insert hyperlinks they are too close together and are very hard to determine where they are apart from one another. How can I insert extra space between the links so they are more legible?

    design view:
    Home Page Why Hi-TEC? Services Our Staff Contact Us
    Make Appointment Our Credentials Learn About Your Car
    code view:
    <p> </p>
          <p><a href="index.html">Home Page</a> <a href="why_hitecauto.html">Why Hi-TEC?</a> <a href="services.html">Services</a> <a href="staff.html">Our Staff</a> <a href="contacts.html">Contact Us</a></p>
          <p><a href="appointment.html">Make Appointment</a> <a href="credentials.html">Our Credentials</a> <a href="about_your_car.html">    Learn About Your Car</a></p>

  • How to get the line in the template (smartform) with out using under score

    Hi,
         How to get the line in the template (smartform) with out using under score,
         and how to print the box (line the check box - small squre box (which is used ot mark the tick by the user in front of the item).
         Please provide the valueble answer as early as possible.
    Thanks,
    Ravi

    Hi Ravi,
    Line -
    Use a SMATSTYLE for this purpose.in the smartstyle create a paragraph or character with underline atribute.Then call the smartstyle in the text.
    Search SDN with Key <b>UNDERSCORE</b>.. will get few more posts on the same.
    For Checkbox - refer link
    Re: Quick Question on Smartforms
    Re: putting tick mark into check box in smartform
    Reward points if this Helps.
    Manish
    Message was edited by:
            Manish Kumar

  • How to provide space and new line to the text in AI Script

    how to provide space and new line to the text in AI Script

    ?? can you explain better, can you at least add another sentence?
    space
    var mySpace = " ";
    new line
    var newLine = "\n";

  • I am using a 5D Mark II and I am getting a series of three curved lines on the photos that are under

    I am using a 5D Mark II and I am getting a series of three curved lines on the photos that are under exposed only.  Can anyone help me figure out why it is doing this?

    Everything on the sensor is going to be organized in rows and columns. You can get a bad pixel or a column of bad pixels... or perhaps even a block ... but not a curve. If you're seeing a curve then certainly there must be something else causing this.
    The camera does have two internal filters in front of the sensor, but those are flat and would probably not be the source of a curved reflection.
    If you are confident this happens with more than one lens, then I might remove the lens and use the menu system to put the camera into manual "sensor cleaning" mode. This really just causes the mirror to swing clear (to the roof the chamber) and also causes the shutter door to open and expose the sensor (although the sensor is actually powered down when in "cleaning" mode). This would allow you to visually check to make sure nothing is hanging in the light path.
    I would normally suspect the problem is caused either by the lens or possibly by a filter mounted on the front of the lens (do you use any type of UV filter or other filter when this happens?) The lens itself is curved glass... but since a "filter" would be flat glass in front of the curved glass, a reflection off the curved glass can bounce back off the filter and into the camera. Many "ghosting" problems are caused by the use of filters (and these can be eliminated by removing the filter or reduced by using filters with anti-reflective coatings.)
    Hopefully you can the solution -- but I would probably be looking at the optics as I suspect this is not related to the camera body.
    Tim Campbell
    5D II, 5D III, 60Da

  • How to remove extract space between pages in smartform without changing output

    Hello Experts,
    I've been given a requirement where I need to remove extra space between pages of a smartform (refer to the attachment). If you look at the following screen shot then you will notice that that there is a command provided to display details on these pages which has a checkbox 'Go to New Page'.
    When I removed the above New Page comment then still I don't see the expected output (Refer to the attached screen shot 'Expected' to see what I need).
    Also there is another there is another New Page command (as shown below).
    When I tried to removed the above New Page Command then output was totally changed which user don't want (as shown below. Table should have been break on BCVI on red line, which happens today but with so much extra space).
    To view the correct output how user want please have a look at 'Expected' screen shot.
    Now the question is what change I should make in my smartform to accomplish the expected output.
    Many thanks in advance.

    Hello,
    I think that it should work, this construction of an loop node including all relevant items and at the event TAB event sort field only these items are copied in the OUTPUT_TAB which should be printed in a separate table on the form. After having printed the table, the content of the internal table is cleared.
    I suppose that you first should check if this TAB "event sort field" includes the correct criteria for the necessary group change. If this event is really defined correctly, then I only have one hint for you.
    I know that the only possibility to define a page break in a table in the Window MAIN is to use the following technique:
    Define an outside loop node and in this loop node a table node, but this table does not have a internal table to be looped through. It includes only the fields to be printed, maybe you have to re-design your table node.
    By the way only then you can define a command node including a page break during the processing of an internal table.
    Regards
    Juergen

  • Make a multiline paragraph match the lines on the form

    I have a form from work that has paragraphs that must be filled out.  The current version of the form has several individual textboxes to fill the paragraph.  This is very cumbersome because if information has to be added or removed to any line except the last line, all the other lines must be manually adjusted.  I am trying to get the praragraph to flow smoothly for editing content while matching the lines on the form.
    I know how to make a multiline textbox and if I use size 10 font i can make it match up pretty well, but then the font size can't be adjustable in case the user needs more space.
    Any suggests?
    Thanks
    Gary

    The lines are supposed to disappear in the demo since they serve no useful purpose when filling-in electronically. They are really only useful when filling-in by hand.
    What you want is indeed something that a lot of people want, but you simply do not have that type of control. I find it better to eliminate the lines altogether from the design of form, or if they are wanted because the blank form may be printed and filled-in by hand, change the spacing of the underlying form to match what a multiline field will be at a particular font size with a particular font. The problem is whatever formula Acrobat/Reader uses to determine the line spacing (leading) is not published, and is in fact different depending on what version is being used. Non-Adobe software that deals with form fields uses something that is likely different than what Adobe software uses since it's not part of the PDF standard or otherwise published.

  • Saving large tiff files we see a lot of times the lines in the saved file that have either missing ( white) pixels or they appear as a black line across entire file or portion of it

    saving large tiff files we see a lot of times the lines in the saved file that have either missing ( white) pixels or they appear as a black line across entire file or portion of it

    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • How can I disappear the lines of the grid from the picture?

    Please help!
    This photo was made through a grid.
    http://www.flickr.com/photos/apexivision/4468964280/sizes/o/in/photostream/
    My question is: how can I disappear the lines of the grid from the picture with Photoshop CS2?  Thanks!!!

    Select the offending parts with a fuzzy-edged selection and adjust the curves to get some relief.
    Then Burn and Dodge can be your friends as well.
    Some things that can help:  Make a duplicate layer so you have the original to compare against (and to go back to as needed.  Work in 16 bits / channel and (ideally) at an upsampled resolution.  Add a Curves adjustment layer above with the curves pulled up so you can lighten up the shadows as needed and see that you're getting things right even in the dark shadows.
    You may need to do some selective noise reduction in the places you've enhanced, as the lightening and darkening will bring up the noise.
    -Noel

  • How do I remove the lines from the picture after using rectangular grid tool.

    So I was making a pixel character for test purpose for my game, and after I finish I didn't know how remove the lines without messing up the picture. I use the erase to remove the excess lines. So I was wondering how do I remove the lines within the picture with out messing up the picture.
    I'm going be using the Illustrator and rectangular grid tool for my game pictures. This is in Illustrator CS6.

    If you use the pathfinders unite, you can be left with gaps between your filled objects. If thats the case, use your select menu to select all of one color, then add a stroke with that same color and increase the size of the stroke if necessary. Repeat for the next color until your done.

Maybe you are looking for