Getting an error in CIF Inbound queue:"Only 0 decimal places are permitted for unit of measure PC"

Hi,
I am getting an error in CIF Inbound queue (function: CIF_ORDER_INBOUND_30A). The error text says "Only 0 decimal places are permitted for unit of measure PC".
Can anyone point out the solution to resolve this error? It would be a big help for me as I am new to APO and so getting difficult to find a clue for it.
Thanks.
Regards
Mansi

Hi Mansi,
Please check the cif queue you will get the order number from that order number you can find out material code. Then check the material master unit of measure in MM03 you have used some alternative unit of measure and system is unable to convert order to  alternative unit of measure because of decimal setting. If you go to CUNI and check the unit if measure PC it is not permitted for decimal places. If you need decimal than change the UoMof Material and use diff UoM or allow the decimal for PC which is not good practice.
Regards,
R.Brahmankar

Similar Messages

  • Problem in CIF Inbound Queue

    Hello Every1,
         When I try to process the CIF inbound queue (APO system) it says the logical system is not  found. But when I check in the table TRFCQIN and TRFCQSTATE the logical system has assigned properly. So please let me know how to rectify this.
    Thanks,
    Siva.

    Hello Chinni,
    Master data cannot be reconciled using Delta Report. It is only for transaction data. If you are still having problem transferring inforecords - first check if the location product combinations used in the inforecord exist in APO.
    Next follow these steps:
    0. Make sure there are no error CIF queues inboudn to APO
    1. Do you have an active integration model with the inforecord and still the procurement relationship is not created in APO? If so then exclude the particular inforecord (by document number) from the integration model.
    2. Generate it and activate it.
    3. Then generate the integration model again without the exclusion and activate this model. This will force sending the inforecord to APO.
    4. See what is the error coming and send the details.
    Thanks,
    Somnath

  • Jwsc Error - Only HTTP ports are supported for JAX-WS

    Hi
    I am trying to create a Webservice from wsdl. I have been able to generate java files and jar file with wsdlc ant task.
    However when i try jwsc I get follwoing error
    [jwsc] [ERROR] - Only HTTP ports are supported for JAX-WS.
    <----- follwowing task for generating java files --->
    <taskdef name="wsdlc" classname="weblogic.wsee.tools.anttasks.WsdlcTask"/>     
    <target name="generate-from-wsdl">
              <wsdlc
                   srcWsdl="wsdl_files/UserPrefWebService.wsdl"
                   destJwsDir="web/web-inf/lib"
                   destImplDir="src"
                   packageName="com.ws.userpref"
                   type="JAXWS"/>
         </target>
    <----- follwowing task for generating class files ----THIS IS FAILING --->
         <taskdef name="jwsc" classname="weblogic.wsee.tools.anttasks.JwscTask" />      
         <target name="build-service">
              <jwsc srcdir="src" destdir="ear">
                   <jws file="com/ws/userpref/UserPrefWebServiceImpl.java"
                        compiledWsdl="web/web-inf/lib/UserPrefWebService_wsdl.jar"
                        type="JAXWS"/>
              </jwsc>
         </target>
    <----- This is the Error --->
    C:\Development\CFCDemoWorkspace\UserPreferencesServer>ant build-service
    Buildfile: build.xml
    build-service:
    [jwsc] JWS: processing module /com/ws/userpref/UserPrefWebServiceImpl
    [jwsc] Parsing source files
    [jwsc] Parsing source files
    [jwsc] 1 JWS files being processed for module /com/ws/userpref/UserPrefWebS
    erviceImpl
    [jwsc] C:\Development\CFCDemoWorkspace\UserPreferencesServer\src\com\ws\use
    rpref\UserPrefWebServiceImpl.java 18:8
    [jwsc] [ERROR] - Only HTTP ports are supported for JAX-WS.
    [AntUtil.deleteDir] Deleting directory C:\DOCUME~1\138904\LOCALS~1\Temp\_3os716
    BUILD FAILED
    C:\Development\CFCDemoWorkspace\UserPreferencesServer\build.xml:24: weblogic.wse
    e.tools.WsBuildException: JWS Validation failed.
    Total time: 10 seconds
    Does any one has any input on this error?
    Thanks
    Srikant

    Thanks David,
    Below is the wsdl
    <s0:message name="ws_getUserPreference">
    <s0:part element="s1:ws_getUserPreference" name="parameters"/>
    </s0:message>
    <s0:message name="ws_getUserPreferenceResponse">
    <s0:part element="s1:ws_getUserPreferenceResponse" name="parameters"/>
    </s0:message>
    <s0:portType name="UserPrefWebServicePort">
    <s0:operation name="ws_getUserPreference" parameterOrder="parameters">
    <s0:input message="s1:ws_getUserPreference"/>
    <s0:output message="s1:ws_getUserPreferenceResponse"/>
    </s0:operation>
    </s0:portType>
    <s0:binding name="UserPrefWebServiceSoapBinding" type="s1:UserPrefWebServicePort">
    <s2:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <s0:operation name="ws_getUserPreference">
    <s2:operation soapAction="" style="document"/>
    <s0:input>
    <s2:body parts="parameters" use="literal"/>
    </s0:input>
    <s0:output>
    <s2:body parts="parameters" use="literal"/>
    </s0:output>
    </s0:operation>
    </s0:binding>
    <s0:service name="UserPrefWebService">
    <s0:port binding="s1:UserPrefWebServiceSoapBinding" name="UserPrefWebServicePortSoapPort">
    <s2:address location="https://localhost:7001/UserPrefService/UserPref"/>
    </s0:port>
    </s0:service>
    </s0:definitions>
    do i need to add <wlhttptransport/> in jws during the buid?

  • When i login to MES operator resp..i get a error saying...You must setup an HR employee for this Oracle Application user...how to resolve this?

    when i login to MES operator resp..i get a error saying...You must setup an HR employee for this Oracle Application user...how to resolve this?

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software. Please reinstall iTunes."

    When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software. Please reinstall iTunes."  I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility.  Any tips on removing this error message for good?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    Error 1402 | Error 1406 | Acrobat, Reader

  • TS1424 Keep trying to down load a Magazine I just purchased an I keep getting an error message that "unable to download folio". Have check for enough space and have deleated app. And reloaded. Also rebooted iPad nothing fixes problem

    Keep trying to down load a Magazine I just purchased an I keep getting an error message that "unable to download folio". Have check for enough space and have deleated app. And reloaded. Also rebooted iPad nothing fixes problem.
    Does the iTunes Store need to reset my subscription or is this a fix I can do on my iPad

    Try This...
    Close All Open Apps...  Sign Out of yopur Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.

  • Gmail question.  I'm getting an error message that states my username or password are incorrect.  I haven't changed anything and the gmail is working fine on the mac book.  The mail function worked yesterday on the iphone but not today - any solutions??

    Gmail question.  I'm getting an error message that states my username or password are incorrect.  I haven't changed anything and the gmail is working fine on the mac book.  The mail function worked yesterday on the iphone but not today - any solutions??

    Try Restarting / rebooting  your Mac before doing anything more drastic..
    S.

  • UKMCRED_SGM0C: Only tables and views are permitted for extraction???

    All,
      My BI transport got failed (from Dev to QA) with the reason
      " UKMCRED_SGM0C: Only tables and views are permitted for extraction" . Can you please help me in this.
    Thanks,
    Andy

    hi Roger,
       Could you please provide more details of the transport ... like what was being transported ... from what I see I feel you attempted to transport a generic datasource.. not sure.
    Best regards,
    Kazmi

  • I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

    I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

    What operating system are you using? Is it on a Mac or a PC? Which preferences are set for external mic/headphones, Audition's or the computers?

  • HT203609 On my 6 plus I cannot get consistent email notifications. I have wifi. Notifications are enabled for the gmail account. Anyone have an idea?

    On my 6 plus I cannot get consistent email notifications. I have wifi. Notifications are enabled for the gmail account. Anyone have an idea?

    Hi Try this Settings, email account Sign, out then Sign, back, in do this will all Email, Accounts that are not working. Cheers Brian

  • Parking error msgs from Inbound queue

    Hi Experts,
    There are situations when an inbound queue (SMQ2) gets build up because of an error msg. In this case, we manually cancel the error msg and allow subsequent msgs to get process. Is there any way using which we can park the error msg aside automatically (into some new queue, like an error queue) and allow subsequent msgs to get process. This will prevent queues from building up and we can fix all the error msgs at later point of time by checking them from newly created error queue.
    Thanks,
    Aditya

    Hi,
    PI 7.3 has the feature of parking the error queues aside and allows the other messages of queue to process....
    I heard this feature is downported to the PI 7.1 also...but no hands on or more info at hand on this...if your are using 7.1 check the sap site...
    Apart from that try to check for activation of CCMS alerts so that person is notified in case if message in queue gets blocked..
    HTH
    Rajesh

  • I am getting a error TN3 Gallery update needed only using firefox where can I update this??

    yes I am getting a error code to update a tn3 gallery to a 4.2v or higher and says I am currently on 4.1. This is only happening on my firefox web browser. All my others work just fine can you tell me where to update this?

    yes I am getting a error code to update a tn3 gallery to a 4.2v or higher and says I am currently on 4.1. This is only happening on my firefox web browser. All my others work just fine can you tell me where to update this?

  • I get this error all the time. Only happened since last month. Script: chrome://browser/content/tabbrowser.xml:537

    ever since up upgraded to firefox 6 i have had problems. i get this error all the time Script: chrome://browser/content/tabbrowser.xml:537
    MAKE IT STOP!!!

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I MOVIE won't let me finalise the project. I am getting an error message saying..The project could not be prepared for publishing because an error occurred. (-50)

    I MOVIE won't let me finalise the project. I am getting an error message saying..
    The project could not be prepared for publishing because an error occurred. (-50)
    Can anyone help please and thank you! :-)

    See my suggestion about duplicating the project in this thread:
    https://discussions.apple.com/thread/4949234?tstart=0
    John

Maybe you are looking for