Getting an error when trying to use warp stabilizer

I made a picture slideshow with some videos and I am trying to stabilize my videos. When I click on "Analyze" a red bar comes up saying: "Warp Stabilizer requires clip dimensions to match sequence". Is there an easy was to transfer everything over to a new sequence that matches the dimensions? Also I am using Premiere Pro CS6.

Try nesting the clips and then adding the warp stabiliser to the nest.

Similar Messages

Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.

Why do I get an error when trying to use a link in the forum?

I just tried to use the link that Varad offered in Redirect certain users with login procedure and I got an error:
The specified thread [0] was not found.
I got the same thing when trying to use a similar link a couple of days ago. They sound like something I might benefit from, but I can' get to them.
The link URL looks like Re: logon username determines page that opens, how can I accomplish this?
Any ideas?
Thanks,
Gregory
P.S. I'm using Firefox 3.0.4

Tony,
That's what I thought, but apparently it worked for Stefan. If you go to Stefan's post (first link above) do you also see the same link as I have attempted to copy? In Stefan's post, do you see the question mark in a diamond?
Thanks,
Gregory

Can i reinstall adobe reader? i get an error when trying to use what i previously installed?

Can I reinstall adobe reader?
I get an error message when I need to use the reader I installed.

Yes, you can reinstall the Adobe Reader, my suggestion would be run the cleaner tool first3 http://labs.adobe.com/downloads/acrobatcleaner.html
then download and install the latest Adobe Reader from this location# http://get.adobe.com/reader/
~Deepak

Getting Security Error when trying to use bitmapdata.draw method on youtube videos

Hi All ,
I am playing youtube videos in UIComponet of flex, but when I trying to capture the image using bitmapdata.draw() method it gives me an secutity error on server , It works well locally in flex editor.
Is any one knows how to resolve this bug??
Thanks in advance
sujit Rai

Try nesting the clips and then adding the warp stabiliser to the nest.

I get an error when trying to use GoToMeeting in Firefox 4.

Specifically, GoToMeeting throws up an error page (link referenced below) that says to join the meeting I must enable Java. They correctly describe the process for doing so in Firefox (Toolbar -> Add-ons -> Plug-ins -> Enable Java Plug-in). However , when I do this I find that the Java Plug-in is already enabled. Is there some other Java Plug-in that I need? Please let me know as soon as possible, as we were poised to deploy FF4 across the company, but as we often use GoToMeeting we can not do so. Thanks in advance for your time and efforts.

Brooks Potteiger I would recommend also reviewing the installation log for the update you are trying to apply. You can find details on how to accomplish this at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

Getting spool error when trying to use a network printer from a remote computer.

I have 2 HP deskjet printers attached to my computer. One is a D4260 and the 2nd is an F4280 all in one. I would like both of these printers to be available on our wireless network so that my girlfriend can use the printers from her laptop. The D4260 is working just fine but when I try to print to the all in one it looks as if it printed on her computer but I get a spooling error on mine and no printing.

Go to hp.com.au, top right corner select support & drivers
select software & driver download type in your printer name HP Deskjet F4280
then select your operating system-step 1
on step 2 select utility diagnostic tools,select HP Print Diagnostic Utility
run the software, select your printer, then diagnose...then select fix all
this software automatically detects spooler errors & fix them
just follow the instructions from the HP Print Diagnostic Utility
good luck.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Get -3256 error when trying to use "multiple speakers" in iTunes

I have had a LOT of Airport problems since switching to Leopard. For the moment, the Airport does seem to now work. I use an Airport Extreme 802.11n, and an Airport Express using WDS. I had a TON of problems with my MBP connecting, running great, then slowly losing bandwidth. For the moment, all is working. The next hassle was that my formerly working WDS stopped working. Now, the base station says WDS is happy. iTunes show the Airport Express is available to broadcast to.
It lets me select multiple speakers, but then gives and error -3256.

I think that I just solved your multiple speaker issue in another post; check out: http://discussions.apple.com/thread.jspa?messageID=5765343&#5765343. Hope this solution works for you too.

I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again.

I get the following error when trying to use the itunes store "your apple id has been disabled"

I get the following error when trying to use the itunes store "your apple id has been disabled". My account was disabled when someone else had been using it without my knowledge. I changed my apple id password and the apple id is still fine, but itunes has it disabled. I verified that the computer is authorized for this apple id. What to do now?

Welcome to the Apple Community.
Contact Apple through iTunes Store Support

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?
Thanks, Scott

Hi
This Q is close to - Something is wrong. What's it ?
You have to supply much more info to be able to start guessing.
• What material was used ? Video codec, Audio file format and Photo file format
• Free space on Start-Up hard disk. How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Burn speed set down or not ?
• Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
And all extra info You can supply - that set's us on track.
Yours wanting to be of help. Bengt W

"500 internal server error" when trying to use F4 help in the variable sele

Hi Experts,
I am getting "500 internal server error" when trying to use F4 help in the variable selection screen (in WAD).
How could this be resolved?
Quick reply would be very helpfull.
Thanks in advance !!

It seems you are using wrong client ID. Make sure your logon pad has right details. You should verify this with your basis team.
If the problem persists then try re-installing. But before you do that you can execute sapbexc.xla which is in the c:\program files\sap\bw. Type c:\ in cell c3 and click "start button". Any red flag means you have wrong version dll/ocx on your local drive, in that case you should reinstall with right patches.
if this solution helps u then pls assign points

Runtime error when trying to use Thinkvantage system updater

I get a runtime error when trying to use the Thinkvantage system updater.Have tried it numerous times and this is the exact message:
"Runtime error!
Program:C:\Program Files\Lenovo\System Update\tvsu.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information."
Can somebody please help me to get the Thinkvantage system updater working properly?
Thanks-George
This issue has since been resolved.Thanks-G

I'm getting the same error. I tried reinstalling system updater but it didn't help.

I keep getting an error when trying to update an app- cannot connect to store. I logged out from my account and tried to log back in and got the same error. I am doing all this from my phone since I no longer own a personal computer (only work)

I keep getting an error when trying to update an app- cannot connect to store. I logged out from my account and tried to log back in and got the same error. I am doing all this from my phone since I no longer own a personal computer (only work) since I use iCloud and I tunes match

YAY!!! Saved it in my Mac's Firefox Bookmarks for easy future access!
Hope you are having a lovely afternoon today! I'm about ready to go bobo....I have an early meeting, and I don't want to oversleep! The nice part is that I work remotely, so I only have to wake up 15 minutes or so before the meeting.... I don't even use an alarm clock anymore (really, my iPhone alarm, which is much more pleasant), unless I have to get up at 6:30 or something....
TMI?
GB

HT204406 hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!

hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!

That's definitely enough to start.
It sure seems like it should work...and then I saw that you're using a router. It could very well be that the router is the weak link here.
Instead connecting to your network router, try using a direct USB connection from your MBP. If that doesn't work, you read this post, which may be relevant to your problem:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Scanning-from-Mac-10-7-fa ils-after-all-recommendations-Not-ready/td-p/1287003
It seems you're up to date with software. Post with your results.

Getting an error when trying to use warp stabilizer

Similar Messages

Maybe you are looking for