Getting ASSERTION failed error while executing RSPC1

Hi Experts,
I have created a chain and when I am trying to open in rspc1 I am getting a prompt which states"Node key does not exist".
After executing the prompt I get a dump stating "Assertion condition was violated" .
source code extract--
METHOD SELECT_NODES.
DATA:   l_nodekey        TYPE tm_nodekey,
          l_t_node_key    TYPE treemnotab.
IF NOT i_t_nodeid IS INITIAL.
    LOOP AT i_t_nodeid INTO l_nodekey.
      APPEND l_nodekey TO l_t_node_key.
    ENDLOOP.
    o_r_tree_control->select_nodes(
    EXPORTING
      node_key_table               = l_t_node_key
    EXCEPTIONS
      multiple_node_selection_only = 1
      error_in_node_key_table      = 2
      OTHERS                       = 3
>>>   ASSERT sy-subrc = 0.
ENDIF.
ENDMETHOD.

Hi ,
This is due to there is some bug in your code.there might be some in the transformation that you are loading.
Check the code you had written in the transformation.
Try to re-activate you transformation and load again....
In whcih SP level you are in ?
Regards
Laxman.

Similar Messages

Getting SP2-0306 error while executing a scrpt.

Hi all,
We are using oracle version 11GR2 .
I am getting the below error while executing a unix script which connect to DB and returns a value. Why we get such issues/ anything wrong in the setup ?
Same code working fine in old db. any idead how to resolve this?
SP2-0306: Invalid option. Usage: CONN[ECT] [{logon|/|proxy} [AS {SYSDBA|SYSOPER|SYSASM}] [edition=value]] where <logon> ::= <username>[/<password>][@<connect_identifier>] <proxy> ::= <proxyuser>[<username>][/<password>][@<connect_identifier>] ERROR: ORA-01017: invalid username/password; logon denied SP2-0306: Invalid option. Usage: CONN[ECT] [{logon|/|proxy} [AS {SYSDBA|SYSOPER|SYSASM}] [edition=value]] where <logon> ::= <username>[/<password>][@<connect_identifier>] <proxy> ::= <proxyuser>[<username>][/<password>][@<connect_identifier>] SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*PlusPlease let me know if you need any details.
Thanks and Regards
Nagaraja

Thanks for the response rp.
I am calling the script checkdbtoproceedjob from another script as below.
DBVALUE=`checkdbtoproceedjob ODS_LOAD $1` >> $LOGFILE
echo "dbvalue is "$DBVALUE
if [ $DBVALUE != "DBCONTINUE" ]
then
echo "**** job will be exited as db says no *****"
exit 0
fi
echo "***** Job will be continued as db says yes ******" >> $LOGFILEDBVALUE is coming as null and I am getting the error.
HOwever, If I execute the script alone as below it is returning the values. I don't think there is issue with credentials.
checkdbtoproceedjob ODS_LOAD FORWARDARTICLE
checkdbtoproceedejob
#! /bin/bash
. config
set -x
checkdbtoproceedjob()
CONTROLFLAG=`sqlplus -s $CONNSTRODS << EOF
whenever sqlerror exit sql.sqlcode
set TRIMSPOOL ON
set serveroutput on
set pagesize 0 feedback off verify off heading off echo off
declare
pv_control_flag varchar2(50);
pv_feed_name varchar2(100) := '$2';
pv_job_name varchar2(100) := '$1';
begin
SP_CHECK_PROCEED_JOB(pv_job_name,pv_feed_name,pv_control_flag);
dbms_output.put_line(pv_control_flag);
end;
exit;
EOF`
checkdbtoproceedjob $1 $2
echo $CONTROLFLAG
set +x
exit 0am i doing something wrong? Please let me know.
Regards
Nagaraja Akkiivalli.
Edited by: Nagaraja Akkivalli on Mar 28, 2012 1:50 PM

Assert Failer Error while installing the Trial Version

Hi,
I am getting the following error while installing the trail version. any help is greatly appreciated. I am also not able to find XCMDOUT.LOG.
ERROR      2005-01-27 11:59:43 [iaxabactorext.cpp:420]
           CIaSdbActorExt::sdbSessionExecute_impl
MDB-07001 No action defined for actor.
ERROR      2005-01-27 11:59:43 [iaxxinscbk.cpp:223]
           abortInstallation
CJS-00081 Assertion failed: in
function sdb_inst_enum() {
    var actn = "SDB_INST_ENUM";
    var call_arr = sdb_action_with_info(actn, "75");
    ASSERT(arguments.callee, call_arr != undefined, "ERROR WHILE EXECUTING dbmcli COMMAND! CHECK THE XCMDOUT.LOG FILE");
    ASSERT(arguments.callee, call_arr[0] != "false", "ERROR WHILE EXECUTING dbmcli COMMAND! CHECK THE XCMDOUT.LOG FILE");
    var e_arr;
    e_arr = new Array();
    for (var a_cnt = 1; a_cnt < call_arr.length; a_cnt++) {
        e_arr.push(call_arr[a_cnt]);
    return e_arr;
ERROR WHILE EXECUTING dbmcli COMMAND! CHECK THE XCMDOUT.LOG FILE

Hi Lakshmi,
Were you ever able to resolve the problem?
-wael

**** ASSERTION FAILED **** Error while starting WebLogic Server 7.0

Hi,
I am getting following error while starting WebLogic Server 7.0 for the first
time. Can anybody help me it this?
Error is:
==================================================
Enter username to boot WebLogic server:system
Enter password to boot WebLogic server:
Starting WebLogic Server...
<May 9, 2003 4:27:47 PM IST> <Notice> <Management> <140005> <Loading configurati
on C:\bea\user_projects\mydomain\.\config.xml>
<May 9, 2003 4:28:04 PM IST> <Notice> <Security> <090082> <Security initializing
using realm myrealm.>
<May 9, 2003 4:28:04 PM IST> <Notice> <WebLogicServer> <000327> <Starting WebLogic
Admin Server "myserver" for domain "m
ydomain">
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<May 9, 2003 4:28:14 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initializatio
n exception
Throwable: weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot
intialize Resource Manager Connection Fac
tory resources because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.
UnknownHostException: Unknown protocol: 'JNP'] ]
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
==================================================

I don't know what could cause this error.
I would suggest you take this upto [email protected]
Kumar
Ajay Jadhav wrote:
Hi,
I am getting following error while starting WebLogic Server 7.0 for the first
time. Can anybody help me it this?
Error is:
==================================================
Enter username to boot WebLogic server:system
Enter password to boot WebLogic server:
Starting WebLogic Server...
<May 9, 2003 4:27:47 PM IST> <Notice> <Management> <140005> <Loading configurati
on C:\bea\user_projects\mydomain\.\config.xml>
<May 9, 2003 4:28:04 PM IST> <Notice> <Security> <090082> <Security initializing
using realm myrealm.>
<May 9, 2003 4:28:04 PM IST> <Notice> <WebLogicServer> <000327> <Starting WebLogic
Admin Server "myserver" for domain "m
ydomain">
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<May 9, 2003 4:28:14 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initializatio
n exception
Throwable: weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot
intialize Resource Manager Connection Fac
tory resources because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.
UnknownHostException: Unknown protocol: 'JNP'] ]
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
==================================================

Getting run time errors while executing the copied SAP programs

Hi folks,
i want to copy an sap program.after coping i need to change some coding there.then i have to create a new transaction for that.
i am just copying the sap program RQEEAL10(transaction-QA32) to Z_RQEEAL10. it has 4 include programs.i am copying them to z programs like
RQ00MF10 copied to z_RQ00MF10
RQALVF14 copied to z_RQALVF14
RQALVF16 copied to z_RQALVF16
RQALVTOP copied to z_RQALVTOP.
now i am executing that program Z_RQEEAL10.but i am getting run time errors as given below.
<b>runtime error---</b>
The termination occurred in the ABAP program "Z_RQEEAL10" in
"SELECT_FIELDS_MANIP2_F16".
The main program was "Z_RQEEAL10 ".
The termination occurred in line 257 of the source code of the (Include)
program "RQALVF16"
of the source code of program "RQALVF16" (when calling the editor 2570).
--Error in ABAP statement when processing an internal table.
--When changing or deleting one or more lines of the internal table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS" or when inserting in the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS", 0 was used as
the line index. An index less than or equal to zero is not
allowed.
The error can occur when using the following options:
1. "INDEX idx" for specifying the line number in the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS"
   where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
   area from or inserting a line area into the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".
3. "TO idx" for specifying the end index when deleting a line
   area from or inserting a line area into the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".
When the program terminated, the table had 2 lines.
these r the runtime errors what i am getting.where is the problem?i have activated all interface & includes.plz advice.
Thanks & regards

Hi Madhu,
I will give you one more check point where you have to give your concentration while copying the standard programs....
Call Customer-Function (Function Exists) if any in the Program when copied will not get executed. Instead you need to call the FM Directly.
one more is also here
You are likely to have some problems with the text-elements and translation that may have been maintained for the original report.
~~Guduri

"Assertion failed" error when executing a simple UCI program

I am using a simple UCI program (tt1.c) with Xmath version 7.0.1 on Sloaris 2.8 that performs the followings:
- Start Xmath701
- Sleep 10 Seconds
- Load a sysbuild model
- Stop Xmath
I am calling the uci executable using the following command:
> /usr/local/apps/matrixx-7.0.1/bin/xmath -call tt1 &
In this way everything works fine and the following printouts from the program are produced.
--------- uci printout ----------
## Starting Xmath 701
## sleep 10 seconds
## load "case_h_cs_ds.xmd";
## Stopping Xmath 701
All the processes (tt1, XMATH, xmath_mon, and sysbld) terminate correctly.
The problem occurs if the 10 second wait after starting xmath is omitted:
- Start Xmath701
- Load a sysbuild model
- Stop Xmath
This results to the following printouts:
--------- uci printout ----------
## Starting Xmath 701
## load "case_h_cs_ds.xmd";
Assertion failed: file "/vob1/xm/ipc/ipc.cxx", line 420 errno 0.
Note that the last line is not produced by the uci program and the tt1 did not
finish (the printout before stopping xmath "## Stopping Xmath 701" was
not produced).
A call to the unix "ps -ef" utility shows that none of the related process has been terminated:
fs085312 27631 20243 0 10:45:29 pts/27 0:00 tt1
fs085312 27643 1 0 10:45:30 ? 0:00 /usr/local/apps/matrixx-7.0.1/solaris_mx_70.1/xmath/bin/xmath_mon /usr/local/app
fs085312 27641 27631 0 10:45:30 ? 0:01 /usr/local/apps/matrixx-7.0.1/solaris_mx_70.1/xmath/bin/XMATH 142606339, 0x8800
fs085312 25473 25446 0 10:45:33 ? 0:01 sysbld ++ 19 4 7 6 5 8 9 0 25446 ++
The questions are as follows:
1- What is "Assertion failed: file "/vob1/xm/ipc/ipc.cxx", line 420 errno 0" and why is that produced?
2- Should the UCI program waits for end of sysbld initialization before issuing commands?
3- If the answer to the above question is yes, is there a way to check the termination of sysbld initialization?
Thanks in advance for you help.
Attachments:
tt1.c ‏1 KB

I tracked down the problem and it is a race condition between the many processes being started up. A smaller delay should also solve the problem. Or, maybe do something else before the first 'load'. The 'load' command tries to launch systembuild and causes the race condition.

XD01 assertion failed error while updating customer master data

Hi Guys,
This is an error when I use transaction XD01 to create customers accounts, If you have any ideas do let me and we'll try it....
The error does not let an BDC or LSMW progress as well. There are also no recent sap notes on the same.
The error is as follow
ASSERTION_FAILED
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
I have a company code CG01 with sales organization CTS0 and I want to transfer or extend all the customer master data to another company code CG03 with the sales organization CTS0
The things that I have tried and not work
using xd01, fd15, fd16, fd01, does not wok and gives the error as above
The things that I have tried and it works
Change the sales organization from CTS0 to CTS1 I am able to post the customer master data, using any of the above tcodes and it does not give any error, however the client wants to sales organization to remain CTS0
So please give me any ideas as per your experience as this transfer of master data has to happen by Monday, else I'll be fried by my boss
My number is 9820029197
Will also keep you'll posted on any developments on this case,
Ronan Pinto

>
> Firstly I am from SAP FI, so totally new to SAP SD
>
Then you are best person to explain the reason on why the same sales organization, can't be assigned to different company codes. When a sales is done through one sales organization, then will the profit/loss be accounted in different company codes. Is it legally allowed in the country, where your customer is doing business? How you are going to develop the balance sheet? Again being the FI person, you are best judge to provide the details to your customer and not a SD guy.
>
> 1) How did the system not give an error while putting the data inside CG02 with sales organisaton same as CST0 same as in company code CG01.
>
I dont see any other method than removing the assignments in the backend and uploading the data. You can consult a Basis person to find the change logs for the assignment table. In my opinion, removing the sales organization from a company code assignment just for loading a customer master data and then reassigning to original sales org is a crooked method and/or not a professional method.
>
> 2) Since I have limited experience of SD, If I have to convince my client about the use of CTS1 sales organisation or a unique sales organisation against his argument that it worked for company code CG02, how should I do it.......
>
As explained above, how the sales will be accounted in different company codes (even if the system allows to assign the same sales org to different company codes)?
I would recommend you to post this question in FI forum (after closing here) to check what are the legal implications for this scenario.
Regards,

ASSERTION FAILED error while migrating update rules

Hi all,
We are migrating the 3.x datasource for sd - lo cockpit.
Migration steps are as follows...
1. Make a copy of the infosouce. Activate it.
2. Migrate transfer rules. Activate it.
3. Migrate datasource.
4. Migrate Update rules for the respective info providers.
      But while migrating update rules ASSERTION_FAILED runtime error occurs.
       the assert condition was violated.
       CL_RSTRAN_TEMPLATE========CP or CL_RSTRAN_TEMPLATE======CM003
Please help i tried all the means to rectify but none succeds.
It is occuring for each datasource .
Thanks in advance.
aravind

Hello
Assertion statement is like a conditional break point in ABAP. When you are trying to migrate the update rules,it is failing with Assertion statement it means there is some error with your update rules. Either the mapping is wrong or the the target to which it is mapped is in inactive state. Please check these and retry your migration.
Regards,
Krishna Tangudu

Getting error while executing workflow: java.lang.OutOfMemoryError.

Hi,
I am getting the below error while executing the unassigment workflow on AD resource having 160 user objects.
java.lang.OutOfMemoryError.
Please provid your inputs on this.
Your help wolud be appriciated.
Thanks
Renuka.

Well, if you're getting an out of memory exception then your memory settings are too low. Odds are there's a period of activity where the memory usage spikes above what you've configured for the VM.

Js-error while executing Multiple Image Upload wizard

If i want to save the configured window of Multiple Image Upload with Save to Database wizard i get this js-error: "While executing onClick in MIUploadWSaveWizard.htm, a JavaScript error occured".
can someone help?
thanx
peter

That again would be more of a question for the Cold Fusion group.
Try http://forums.adobe.com/community/coldfusion/coldfusion_administration
Those people will be able to help you out more.
Brad Lawryk
Adobe Community Expert, Dreamweaver
Adobe Usergroup Manager, Northern British Columbia Adobe User Group

Error while executing BexQuery

Hi all,
I am getting the following error while executing a Bex Query.
SQL Error: 16
SQL Error: 0
Error while reading data; navigation is possible
Can you let me know of any inputs regarding the same ?
Regards
Snehith.

hi snehith,
Check whether your infoprovider on which this query is build contains invalid Chars.
thanks

ORA-01722: Error while executing query in Query Designer

Hi All;
I am getting the below error while executing a query
ORA-01722: invalid number
Error reading the data of InfoProvider
Error while reading data; navigation is possible
Have anyone encountered this before? How do i resolve this?
Thanks!
~ Arun KK

Hi,
Did you checked all the setting required to run this query are present in the Qualtiy system??
Which means all the characteristics,key figures are in active state.
Also all the cubes are in active state with no issues with the involved in the dimensions used for the query.
Also do a check in the query and if you have authorization try to save the same query and execute the saved one again in quality and see if the same error happens again.
Thanks
Ajeet

Error while executing the CKMLCP (Actual Costing) Transaction

Hi Expert,
I am getting the following Error while executing the CKMLCP (Actual Costing) Transaction through my User ID in system. If we execute the same transaction with other user id then there is no Error. same role is assign to both user. Try to check SU53 screen shot but it show no error
See the below error for referance:-
Internal error in program SAPLCKML_RUN_COCKPIT_ACT
Message no. CKMLRUN004
Diagnosis
An unexpected situation has appeared in program SAPLCKML_RUN_COCKPIT_ACT.
The problem has to do with a program error - the indirect result of a program error or an inconsistency in Customizing.
System Response
Processing had to be terminated.
Procedure
Inform your system administrator
Thanks
Dinesh

Hi Shyam,
Thanks Shyam,
I check this note this is not applicable for my system, In mention note Correction delivered in Support Package 600.
but support Package in my system SAP_APPL 603 SAPKH60303,
Is there any other note or solution for 603 SP
Thanks
Dinesh

Error while executing the report FAGLB03

Hi,
i am getting the below error while executing the report FAGLB03 and double click on the balances to view the report on line item wise.
There is no active info structure for field catalog SAP_FI_DOC_003
Message no. Q6504
Diagnosis
The system wants to access the Archive Information System. It uses the field catalog SAP_FI_DOC_003 to do this. However, there are no active archive information structures for this field catalog.
Procedure
Create an info structure for field catalog SAP_FI_DOC_003 or activate an info structure for this field catalog.
Please could some one help me on this issue.
Thanks & Regards,
Venkat

Hi,
Please refer the below note.
1361304.
Reg
Madhu M

Error While Executing the Asset history report S_ALR_87011990

Hi,
I am getting the below error while executing the Asset History Report - S_ALR_87011990
No data was selected
Message no. AB064
Kindly advice me

Hi,
Thi may be a authorisation issue. I doubt that it will get recorded in su53 for report executing. Check with basis guy for respective asset class authorization.

Getting ASSERTION failed error while executing RSPC1

Similar Messages

Maybe you are looking for