Getting different result while executing the report by debugger
Hi All,
I am facing a peculiar issue. When i execute the report from SE38 i am getting a particular set of values in a alv report.
But if i start debugging the report by using /h and execute . i am getting another set of result. How does it happen any idea.
Without debugger result is
a
b
c
With debugger i am getting result as
a
d
e
f
What may be the reason . Kindly help.
Thanks in advance.
S.Velsankar
Hi,
you mean you have'nt change anything while debugging and results are different when ALV is displayed?
I don't really understand your issue... Could you give more details?
Kr,
m.
Similar Messages
-
Getting a dump while executing the standard report BUSCHDOC
Hi,
I am getting a dump while executing the standard report BUSCHDOC.
I am specifying the following values:-
Application Object : BUPA
Business partner:<some business partner>
Changed on: <some date>
Changed by:<some userid>
Below are the dump details
Short text
CREATE DATA: The specified type "BUSSRCH_401BUPAT" is no valid data type.
Any suggestions to avoid the dump are welcome.
Thanks,
RavindraHi Ravindra,
Can you execute report BUP_BUSSRCHGF_REPAIR and try again ?
Also, go to transaction BUS10, click the button Geneate Selection. On next screen, give Application object = BUPA, Max no. of tables per view = 1.
Regards,
Rishu. -
Error while executing the report to display on the web in BI 7.0?
Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance. -
Error while executing the report FAGLB03
Hi,
i am getting the below error while executing the report FAGLB03 and double click on the balances to view the report on line item wise.
There is no active info structure for field catalog SAP_FI_DOC_003
Message no. Q6504
Diagnosis
The system wants to access the Archive Information System. It uses the field catalog SAP_FI_DOC_003 to do this. However, there are no active archive information structures for this field catalog.
Procedure
Create an info structure for field catalog SAP_FI_DOC_003 or activate an info structure for this field catalog.
Please could some one help me on this issue.
Thanks & Regards,
VenkatHi,
Please refer the below note.
1361304.
Reg
Madhu M -
Portal asking for Login details again while executing the reports
Hi Team,
Our Portal is asking for Login details again while executing the reports individually.
The issue is the if i enter the same PORTAL Login credentials, its showing as Authentication failed.
PLEASE ADVICE ASAP.
thanks & regards
SnehaHi Kiran,
I have recently taken up this portal.. so not clear on the structure.
however, I observed there was no user mapping available.. so i added the same with my login credentials..
stil the issue persists.
Please advice.
Sneha -
TSV_TNEW_PAGE_ALLOC_FAILED error while executing the report
Hi all,
. We are having an info cubeXFIAP_C12 (FIAP: Vendor Line Item Open).In which we have defined 10 Dimensions and 6 Line Item Dimensions. We have created a report on this with Key date as Input Variable Which gives me From Start to Till Date data. Also have an Variable on company code.
Then No of Records in my Cube is 45, 70,624.Compressed the Info Cube data .But No aggregates on it.
Now when I provide the key date as 30.06.2011 and Company code =XYZ.
I am unable to Execute the Report, It gives me a short Dump. Saying NO ROLL MEMORY.
Variables:
1. Key Date: Is a Customer Exit variable .If user Enters Data as 30.06.2011 ,It fetches data from u201C00000000u201D to u201C30.06.2011u201D.
2.Company code: Is a Manual Entry /Default variable.
I also have shot dump.Please find the error analysis of dump below:
The internal table "\FUNCTION-POOL=RRK0\FORM=MEGA_SORT_M\DATA=C_TSX_SORTK[2]-GT
ABIX[1]-GTABIX" could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 4
Number of rows: 1503307
Allocated rows: 1503307
Newly requested rows: 2048 (in 1 blocks)
can any one help me .......
Regards
LaxmanHi,
Just check following things
1http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTMM/BCCSTMM.pdf
2. See whether any back up process is happening and it has consumed the main memory.
3. Are you getting this error regularly
4. See any transport went and compression/aggregation got removed.
5. Check whether there are many dumps in ST22 same time when you execute report
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4ab89e84-0d01-0010-cda2-82ddc3548c65?QuickLink=index&overridelayout=true
6. http://www.sap-press.de/download/dateien/1049/sappress_bw_performance_optimization_guide_080.pdf
7. Check whether Infoprovifder got removed from BIA
8. Query removed from BIA post transport
9. Run RSRT and regenerate the report.
Thanks and regards
Kiran -
I am getting a error while executing the Web Dynpro Application Page.
Hi All,
I am getting a Error while executing a web dynpro application :::
: Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component: Z_WEP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
I have checked this error description in ST22 :
What happened?
The exception 'CX_WDR_RT_EXCEPTION' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_WDR_CLIENT_APPLICATION=====CP' has to be
terminated.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WDR_RT_EXCEPTION', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component:
Z_XXP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
Can u plz help me regarding this error.
Thanks,
Deepika>Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered
Looks to me like you are trying to fire a navigation plug within WDDOMODIFYVIEW. According to the rules of the WD Phase Model this is not allowed. -
Dump while Executing the Report HINUINFU
Dear All
I am getting Dump while executing the T.Code - HRPBSIN_IN_INFU (HINUINFU). As per my Configuration it should update the IT0267 and the IT0582. While debugging the We found out that its updating the IT0267 internally. But while reaching to IT0582 its reflecting on the feature 40CEA and the T549D.
here we are having the Telephone Reimbursement for this i copied the Tax code SEXM to ZTEL and assigned to my wage type
I also maintaied this Subtype to the feature 40CEA.
Checked also the IT0582 and its subtype time constraint.
Still the the DUMP persisisting. Please provide the solutions if any of you come across with the same situation.
Thanks & Regards
Srikanth ReddyHi
Issue has been resoved internally. Return value to feature set as HINUOSD0 to MOLGA. hence closing the thread
Regards
Srikanth Reddy -
Getting no result while executing RFC-enabled function module
Hi folks,
Iam having a remote-enable function module which
divides two numbers and gives out the result.
For this i have created two import parameters A and B
of type CHAR10 and one export parameter C.
In the source code i've given the code as C = A / B.
when i execute this function module by providing the
appropriate RFC TARGET SYS and values for A and B respectively,
Iam getting no result!!
The RFC destination used here is of type T and is working fine!
Where iam going wrong in getting the desired result for the parameter C ?
Lookin forward for your quick response..
cheers ...
RamFirst, are you changing the values to numeric types inside the FM?
Second, if you are doing so check the FM in SE37 that it is giving result or not?
Regards,
Amit
Reward all helpful replies. -
Getting different result while running Dashboard SP Using Temporary table?
Hi Experts
I am getting different result when I run my dashboard procedure I am using temporary table with "ON COMMIT PRESERVE ROWS", below is the information
I am running my attendance dashboard procedure which will display the employee attendance status based IN and OUT punches the status like AA-full day absent, GG-Full day Present, AG-First half absent,GA-Second half absent. Now when I run the first time my procedure for first time I am getting status AA even though IN and OUT timings are correct and if run it again then it is displaying the status for same employee as GG
I didn't understand the problem where it is effecting the statusChakravarthyDBA wrote:
It is procedure which will display the employee status, back end I am storing the procedure result in Temporary table with "ON COMMIT PRESERVE ROWS", when I run the procedure first time it is showing wrong information when I run it again second time then it is showing correct information. I don't know why the status is changing.
first time employee status is AA --Full day absent and Second time is GG--Full day present (in both cases IN and OUT timings are correct only)
is it effecting due to temporary table?
So, you have a GTT and you're doing "something" with it and that "something" isn't what you expect.
I've about summed up what you've posted and given us to work with. If you have specific examples please do share. Without them we're going to be of very little use to you.
If you aren't getting the results you expect, it stands to reason that
1) you don't understand the outputs you are supposed to be getting
2) you have a bug in the code developed
Please stop and think about this, pretend you are the one trying to help out. You've been given little to no information about a system you've never seen before. You need to explain your situation as you would if you brought someone in to your shop to show them this problem you are having ... the rules don't change just because it's not face-face interaction.
Cheers, -
Getting error while executing the report in WEB
Hello Experts,
I have did validation in my report on selection screen, if that validation is successful then only we can see the report output
otherwise it's give the error message.
Validations are working query designer and RSRT but when I run the report in WEB then even if the validation is successful then also I am getting the error message and not able to see the report output.
I have written the code in user exit for validation.
Can any one tell me why it is so?
what needs to do?
Thanks
ChetanHi.
Could you plz explain your validation logic and wich way it done ?
Could you plz provide error message ?
Regards. -
Dump while executing the report in the background!!!
Hi Experts,
I have created one report which is calling the "HRASR_TEST_PROCESS" (HR form process) thru BDC.
Its running fine while executing via SE38 (foreground) but getting dump while executing from the background with same variant.
The dump is follows,
Short Text
Exception condition "CNTL_ERROR" raised.
ERROR ANALYSIS
A RAISE statement in the program "CL_GUI_CUSTOM_CONTAINER=======CP" raised the exception condition "CNTL_ERROR". Since the exception was not intercepted by a superior program, processing was terminated.
Line Source Code
32 WHEN 1.
33 RAISE CNTL_SYSTEM_ERROR.
34 WHEN 2.
35 RAISE CNTL_ERROR.
36 WHEN 3.
37 class cl_gui_cfw definition load.
38 message id 'DC' type 'W' number cl_gui_cfw=>reason_no_init
39 raising create_error.
40 WHEN 4.
41 RAISE LIFETIME_ERROR.
42 WHEN 5.
43 RAISE LIFETIME_DYNPRO_DYNPRO_LINK.
44 WHEN OTHERS.
45 RAISE CNTL_ERROR.
46 ENDCASE.
47
48 m_container_type = CONTAINER_TYPE_CUSTOM.
49
50 CALL METHOD SET_VISIBLE
51 EXPORTING
52 VISIBLE = '1'
53 EXCEPTIONS
54 CNTL_SYSTEM_ERROR = 1
55 CNTL_ERROR = 2.
56
57 CASE SY-SUBRC.
58 WHEN 0.
59 WHEN 1.
60 RAISE CNTL_SYSTEM_ERROR.
61 WHEN 2.
>>>>> RAISE CNTL_ERROR.
63 WHEN OTHERS.
64 RAISE CNTL_ERROR.
65 ENDCASE.
66
67 m_name = container_name.
68 call method set_window_property
69 exporting property_id = property_name
70 value = m_name
71 keep_cache = 'X'
72 exceptions others = 1.
73 if sy-subrc ne 0.
74 clear m_name.
75 raise cntl_error.
76 endif.
77
78 CALL METHOD ME->REGISTER_CACHED_W_PROPERTY
79 EXPORTING
80 PROPERTY_ID = property_height
81 EXCEPTIONS
Kindly let me know, what is the problem and how can i solve it.
Thanks in advance.
Regards,
HarishHello Zhou,
indeed, as you mention the ALV grid, there are some workarounds in the system, but there is no global solution. For example, the function module REUSE_ALV_GRID_DISPLAY detects internally whether it is called in background mode, and in this case it forwards the call to REUSE_ALV_LIST_DISPLAY which is runnable in background mode, since it creates an ABAP list.
But normally, when using objects of the control framework in your program, you are restricted to dialog mode.
Kind regards,
Rüdiger -
GETTING NOT ASSIGNED WHILE EXECUTING THE QUERY
Hi Experts,
i have one query on 0sd_c03, while i am executing this query i am getting 'notassingned' in some keyfigures like "width,length,grade,grade series,quality". but i have the data in datatarget.
what is the problem,what is the solution for this.
pl help me,
thanks & regards
venkathi,
is the report is on cube/ over multiprovider. if the report is multiprovider then chk all the fields in the identifcation is properly assigned to the infoproviders(cubes).
if u have more than one cube then this issue might happen.
any way, chk for the codntions/filters/restrcition for key figures at the report level.
Ramesh -
Issue while executing the report
Hello experts,
I have an issue related to executing the BI Report. In one report , i get an issue of Time Out, as the report is executed for a single day only with a single restriction. Also i execute the same report in RSRT, there also it gives a short dump. I checked the data into the related component for the same selection parameter values. here I get the data but it is creating issue while executing in RSRT or analyser or EP.
what is happening there am not able to understand. please advice.
Also searched in SDN but not get the relevant thread.
Thanks in advance
Nehahii
The query does not includes any RKF, CKF any complex calculations. as I said before also query is based on MP which is designed on a single Cube. There are no such navigational Attributes used for selection, Number of records are not more than 300 on that particular selection parameter
there is only one info object which is creating issue & it is a master info object. If i am restricting this info object in the query & then executes the query , it gives the error msg also i put a variable for input parameter, & there I restrict the value, then also query executes with an error msg
But if query is not restricted with any value for that info object then query executes with in a second.
Thanks
neha -
SSRS Error while executing the report
Hi,
dataextension!WindowsService_0!7d4!03/09/2015-11:21:04:: e ERROR: Throwing Microsoft.ReportingServices.DataExtensions.XmlDP.XmlDPException: , Microsoft.ReportingServices.DataExtensions.XmlDP.XmlDPException: Failed to execute web request for the specified
URL.
Internal Server Error: The remote server returned an error: (500) Internal Server Error. ---> System.Exception: The remote server returned an error: (500) Internal Server Error.
i can see the above log in reporting services log files, does anyone having the idea about this?
Thanks
Veera
Thanks
VeeraHi Veera,
According to your description, when you run the report, you get XMLDPException and 500 error.
In your scenario, I would like to know if you are running report in report server or SharePoint site. Does the error only occur when executing this report? Based on my research, the same issue occurs when using SSRS 2008. And the reason the IIS 7 defaults
to Kernel auth mode. So if that is a case, please disable Kernal Auth mode for IIS and registering the SPN on the APPool account.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support
Maybe you are looking for
-
Can you use apple tv as second screen? Kun je apple tv gebruiken als 2e beeldscherm?
Can you use apple tv as second screen (on a Philips 32PFL8404H/12)? Thanx! Kun je apple tv gebruiken als 2e beeldscherm (op een Philips 32PFL8404H/12)? Bedankt! Sander
-
64-bit iFilter will not index remote files
I have the 64-bit Adobe iFilter installed on a Windows 2008 Server, and I am using it with Windows Indexing Service to index documents. I am able to read .pdf documents on the local machine, but I cannot get data from .pdfs on remote file servers (w
-
I accidentally upgrade Lightroom 4 Catalog
Is there way to recover files from my backup of time machine, I lost everything in my catalog,collection, public services, settings and also presents. Is there way to recover them can some one please help.
-
I have a php script that runs that sends out an email for notification purposes. However, the From user does not exist in Groupwise. Therefore if a user has a rule set to auto reply in example an out of office reply they receive a 550 host unknown er
-
Forgot password, email isn't being sent
I forgot my Blackberry ID password. Went to reset it, it said an email would be sent but it never showed. It's been 4 days. What can I do?