Getting duplication of records in the out put of the report on multipro..

hai ,
We are trying to execute a report on a multiprovder.While executing the report we are getting duplication of records while in case if we are removing the created 'new selection' or 'new fromula' in the query designer we are not getting the duplicate records.
Now as per our requirement we do not need duplicate records.
Plz could any one help me out with this problem

Hi Jvr,
$server | ($_ -split '=')[1] -replace '}' is working.. :)
The email doesn't have @{ = }, its only displayed in the output.
Any help on the REGEX part?

Similar Messages

How to display the out put of the sql query in a text file using forms

I want to display the out put of the sql query in a text file using forms 6.0.Same could be done using spool command in sqlplus but i want it using forms....Fiaz

Have a look at the text_io package:
http://www.oracle.com/webapps/online-help/forms/10g/state?navSetId=_&navId=3&vtTopicFile=f1_help/oraini/c_text_io.html&vtTopicId=
cheers

Importing the out-put to the exel

Hi all,
iam very new to the unix and sql,
just i want to know how to export the out-put of the query into exel using unix(spool)

A lot of people rob banks too.
You can spool an output to a file delimiting columns with commas if you wish. But that is outputting a file not outputting to Excel.
Personally I'd fire anyone in a data center I caught outputting Oracle into a non-secure unauditable form and putting the organization at risk.

Is it possible to export the out put of Crystal report into text file?

Hi All,
Is it possible to export the out put of Crystal report into text file?

Hi
Yes, Go to File --> Export --> Export Report --> Under Format select TEXT & select the destination as "Disk file"(defaultly selected)
Give the proper details as per your requirement for "Characters per inch" & "Number of lines per page" & click on 'OK"
In "Choose Export file" window, select the destination folder & provide file name. click on "SAVE"
Regards
Ashwini

To get the the out put of the procedure..help needed

hi all,
i have a procedure :
CREATE OR REPLACE PROCEDURE EN_GetCategory
     StaffID IN      VARCHAR2 DEFAULT NULL,
     ResultCategory OUT      VARCHAR2
AS
v_exec_tx varchar2(2000);
     Condition VARCHAR2(1000);
     Category VARCHAR2(1);
     SQL_ADV VARCHAR2(2000);
     Cnt          NUMBER(10);
     Cnt1          NUMBER(10);
CURSOR curCategory IS
SELECT SMC.Category,SMC.Condition FROM ST_MS_Category SMC ORDER BY OrderRowNo;
     BEGIN
          EXECUTE IMMEDIATE 'TRUNCATE TABLE TMP';
          OPEN curCategory;
          FETCH curCategory INTO Category, Condition;
          while curCategory%FOUND
          LOOP
          BEGIN
               v_exec_tx:='SELECT COUNT(*) FROM ST_EMPLOYEE WHERE StaffID=''' || EN_GETCATEGORY.STAFFID ||''' AND ' || EN_GETCATEGORY.CONDITION;
               EXECUTE IMMEDIATE v_exec_tx into Cnt;
IF Cnt > 0 THEN                              SELECT COUNT(*) INTO CNT1 FROM tmp ;
          IF CNT1> 0     THEN
                                   UPDATE tmp SET CAT = Category ;
          ELSE
                                   INSERT INTO tmp VALUES (Category );
          END IF;
          END IF;
          FETCH curCategory INTO Category, Condition;
               END;
          END LOOP;
          CLOSE curCategory;
          BEGIN
               FOR REC IN ( SELECT CAT FROM tmp
               LOOP
               EN_GetCategory.ResultCategory := REC.CAT;
               END LOOP;
          END;
     END;
i need to execute this procedure..
i tried EXEC EN_GETCATEGORY('812005','');
but getting error invalid sql statemnt..
i think for this we have to write some more code can u please help to to find the output ofthis procedure..
Thanks In advance

Hi,
i tried EXEC EN_GETCATEGORY('812005','');It's execute Procedure_name('Parameters');
Regds.What tosh! "exec" is perfectly ok to use to call a procedure.
The problem is with the OUT parameter. You need to declare a variable into which the OUT value can be put.

Can we able to take the out put have the file into another file in unix

Hi all ,
My question is .. we are having one shall fill , we need to take the output of that file to another file ,
but the output is not printing into another file..
what am guessing is we have only read and execute permission on that file.. we don't have write permission on that file and the folder where the file is exists .
my Question is , Do we need all permission on File to copy the output to another file... ?
because we are redirecting the output to another folder where we can create the another file and read and write permissions .
-rwxrwxr-x 1 th th 499 Jun 20 01:06 Coverage
like this we are having the permission on that file
for the folder we are having the permission
drwxrwxr-x 6 kpsmith kpsmith 12288 Aug 9 21:59 1.3
can any one help me out from this problem
Thanks
Sreedhar

Assuming 'shall fil' is shell script , other than dumping even more garbage in this forum, what does this question have to do with Oracle?
Or can't you type anything in the address bar of your browser and is this URL the only one you can visit?
Sybrand Bakker
Senior Oracle DBA

Need to filter the out put of iw38 reprort

hello Experts,
i have requirement like need to filter the out put of iw38 report and after that again i need to filter that output by using department and client code and oreder .ned to show out put with 3 push buttons .
dertails:
selection screen fields:
region
customer code
oreder
date range
from these 4 fields i need to pass two(order and date range)   fields to iw38 report and then what ever output i am getting again that should filter by customer code and region which are there in my program
, need to display the out put with 3 push buttons .
plz suggest me with appraoach and sample code .
Note : i am using using submit and return export memory but its directly showing iw38 output and not coming back.

Hi ananta,
The function module LIST_FROM_MEMORY loads the list from the ABAP Memory to an internal table of the row type ABAPLIST.
The function module WRITE_LIST inserts the content of an internal table of the row type ABAPLIST in the current list.
The function module DISPLAY_LIST displays the content of an internal table of the row type ABAPLIST in a separate list screen.
check the below program..
REPORT Z642_TEST2.
DATA list_tab TYPE TABLE OF abaplist.
SUBMIT riaufk20 EXPORTING LIST TO MEMORY
                                AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = list_tab
EXCEPTIONS
    not_found = 1
    OTHERS     = 2.
IF sy-subrc = 0.
CALL FUNCTION 'WRITE_LIST'
    TABLES
      listobject = list_tab.
ENDIF.
write: ' This is calling program', sy-repid.
Edited by: Rammohan Nagam on Apr 8, 2009 4:05 PM

How should we get the out put file-name same as in put file-name in file to

Hi frnds,
having hundreds of files in the sender system with different names, how should we get the out put file-name in the receiver system same as the in put file-name in file to file scenario ?
Thanks in advance.
truly,
snrvakiti.

Hi,
In Receiver File Adapter you can set under 'Adapter-Specific Message Properties'
check Use Adapter-Specific Message Properties
check Fail on Missing Adapter Message Properties
Check File Name
Have a look at this link, [File_to_File|http://allsapnetweavernotes.blogspot.com/2008/09/how-can-i-access-filename-from-fileftp.html]
Regards,
P.Rajesh

Printing all error messages in the out put report

Hi all,
I have MATNR and WERKS data in final internal table now my requirement is ineed to print all the error messages for all the materials (where sy-subrc ne 0) in the out put report. how can i do it for multiple error records will anybody tell me with coding
The Requirement is like bellow:
Take material number(s) (MARC-MATNR) from selection screen then check to see if any plants have that material setup as QM active (MARC-QMATV). If no, then issue message on report.
Thanks,

Hi Mythili,
Hope the attached code helps you...
TABLES marc.
TYPE-POOLS: slis.
TYPES : BEGIN OF g_ty_msg,
        type LIKE sy-msgty,
        msg(120),
       END OF g_ty_msg.
TYPES: BEGIN OF g_ty_marc,
        matnr TYPE matnr,
        werks TYPE werks_d,
        qmatv TYPE qmatv,
      END OF g_ty_marc.
DATA: g_t_msg TYPE TABLE OF g_ty_msg,
      g_r_msg TYPE g_ty_msg.
DATA: g_t_marc TYPE TABLE OF g_ty_marc.
FIELD-SYMBOLS <fs_marc> TYPE g_ty_marc.
SELECT-OPTIONS: s_matnr FOR marc-matnr,
                s_werks FOR marc-werks.
START-OF-SELECTION.
SELECT matnr werks qmatv FROM marc
    INTO TABLE g_t_marc
    WHERE matnr IN s_matnr AND
          werks IN s_werks.
IF g_t_marc IS NOT INITIAL.
    LOOP AT g_t_marc ASSIGNING <fs_marc>.
      IF <fs_marc>-qmatv IS INITIAL.
        g_r_msg-type = 'E'.
        CONCATENATE <fs_marc>-matnr <fs_marc>-werks
          INTO g_r_msg-msg SEPARATED BY space.
        APPEND g_r_msg TO g_t_msg.
        CLEAR g_r_msg.
      ENDIF.
    ENDLOOP.
ENDIF.
END-OF-SELECTION.
PERFORM display_log.
*&      Form display_log
      To display error log as an ALV Popup
FORM display_log .
CONSTANTS: l_c_type(4)    TYPE c VALUE 'TYPE',
             l_c_msg(3)     TYPE c VALUE 'MSG'.
DATA : l_t_fieldcat TYPE TABLE OF slis_fieldcat_alv,
          l_r_fieldcat TYPE slis_fieldcat_alv.
DATA : l_f_line TYPE i.
CLEAR l_r_fieldcat.
l_f_line = l_f_line + 1.
l_r_fieldcat-col_pos    = l_f_line.
l_r_fieldcat-fieldname = l_c_type.
l_r_fieldcat-seltext_m = 'Type'.
APPEND l_r_fieldcat TO l_t_fieldcat.
CLEAR l_r_fieldcat.
l_f_line = l_f_line + 1.
l_r_fieldcat-col_pos = l_f_line.
l_r_fieldcat-fieldname = l_c_msg.
l_r_fieldcat-seltext_m = 'Message'.
l_r_fieldcat-outputlen = 120.
APPEND l_r_fieldcat TO l_t_fieldcat.
To display the message log as a Popup in the form of ALV List
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
    EXPORTING
      i_title       = 'Message Log'
      i_tabname     = 'G_TY_MSG'
      it_fieldcat   = l_t_fieldcat[]
    TABLES
      t_outtab      = g_t_msg
    EXCEPTIONS
      program_error = 1
      OTHERS        = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " display_log
Best Regards,
Suresh

Is it possible to display only dynamically selected fields in the out put?

Is it possible to display only dynamically selected fields in the out put? i need to display set of columns in the selection criteria, but in the output i have display only input given fields. because i need to convert it into .csv file. So i have to display selected fields from internal table. In oracle they are using"execute immediate". is there any equivalent in SAP?
thanks in advance.

Hi Remya,
Are you talking about dynamic programming in ABAP ?
If yes, there are concepts like RTTS which facilitates it.
Yes, the select query also supports dynamic selection of fields. ( Please care about ( ) in dynamic sql ).
Do more research on Field Symbols and statements like ASSIGN COMPONENT OF.
Regards,
Philip.

Run Clear Case command from java and save the out put in to a file.

Can any one help me out ...
I want to execute Clear case command from a java and want to save the out put of this command to a file.
I am naot able to find out how to start..
Message was edited by:
chandra_verma

http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html

In ALV Reports, i want to edit records manually in out put display

hello all,
in ALV Reports, i want to edit records manually in out put display. how can i do that?

*& Report ZTEST1
REPORT ztest1.
TYPE-POOLS: slis.
DATA:i_sbook TYPE STANDARD TABLE OF sbook INITIAL SIZE 0,
     i_sbook1 TYPE STANDARD TABLE OF sbook INITIAL SIZE 0,
     i_fieldcatalog TYPE slis_t_fieldcat_alv,
     wa_fieldcatalog LIKE LINE OF i_fieldcatalog,
     wa_sbook TYPE sbook.
DATA:wa_layout TYPE slis_layout_alv.
SELECT-OPTIONS:
s_carrid FOR wa_sbook-carrid.
AT SELECTION-SCREEN.
IF s_carrid IS NOT INITIAL.
    SELECT COUNT( * )
      FROM scarr WHERE carrid IN s_carrid.
    IF sy-subrc <> 0.
      MESSAGE e000(ztest) WITH 'Invalid Airline Code'.
    ENDIF.
ENDIF.
START-OF-SELECTION.
SELECT *
    FROM sbook
    INTO TABLE i_sbook
    UP TO 50 ROWS
    WHERE carrid IN s_carrid.
CHECK sy-subrc = 0.
i_sbook1[] = i_sbook[].
DATA: l_repid TYPE syrepid VALUE sy-repid.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name               = l_repid
      i_internal_tabname           = 'I_SBOOK'
     i_structure_name             = 'SBOOK'
      i_client_never_display       = 'X'
*   I_INCLNAME                   =
*   I_BYPASSING_BUFFER           =
*   I_BUFFER_ACTIVE              =
    CHANGING
      ct_fieldcat                  = i_fieldcatalog
    EXCEPTIONS
      inconsistent_interface       = 1
      program_error                = 2
      OTHERS                       = 3
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT i_fieldcatalog INTO wa_fieldcatalog.
    IF wa_fieldcatalog-fieldname = 'SMOKER'.
      wa_fieldcatalog-edit = 'X'. " REUSE_ALV_GRID_DISPLAY
*      wa_fieldcatalog-input = 'X'. " REUSE_ALV_LIST_DISPLAY
    ENDIF.
    MODIFY i_fieldcatalog FROM wa_fieldcatalog TRANSPORTING edit input.
ENDLOOP.
wa_layout-window_titlebar = 'My Title'.
wa_layout-zebra = 'X'.
wa_layout-colwidth_optimize = 'X'.
DATA repid TYPE syrepid VALUE sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = repid
      i_callback_pf_status_set = 'SET_PF_STATUS'
      i_callback_user_command = 'SUB_USER_COMMAND'
      is_layout        = wa_layout
      it_fieldcat      = i_fieldcatalog
    TABLES
      t_outtab         = i_sbook
    EXCEPTIONS
      program_error    = 1
      OTHERS           = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*&      Form sub_user_command
*       text
*      -->R_UCOMM      text
*      -->RS_SELFIELD text
FORM sub_user_command USING r_ucomm LIKE sy-ucomm
                                   rs_selfield TYPE slis_selfield.
CASE r_ucomm.
    WHEN '&IC1'. "Double click
      IF i_sbook1[] NE i_sbook[].
        MESSAGE i001(00) WITH 'Hmm...some data changed'.
      ENDIF.
ENDCASE.
ENDFORM.                    "sub_user_command
*&      Form set_pf_status
*       text
*      -->RT_EXTAB   text
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTANDARD'.
ENDFORM.                    "set_pf_status

While printing, why does PE11 crop the out put?

While printing, why does PE11 crop the out put?

Did you crop the photo to the same aspect ratio as your print size? If not, then the software will crop it for you.

I want the out put of number in(10,4)

I want out put of the number like this formate (10,4). can any one give the syntax for this..
by using the round function round(38.439494) = 38.439. but how to restrict the integer to 10

Prem,
My understnding the below you are expecting.
select round(38.439494,3) from dual;
38.439
If it's not,please make sure post clearly.
Regards,
Vissu.....

Store the out put of smartform in a directory which is created on app..Serv

Dear All,
I want to store the out put of smartform in a directory which is created on application server.so that the user in future can directly print the output with out again executing the smartform.....
regards,
Sudheer.G

hi Sudheer,
Correct me if I am worng but you cannot issue output without executing smartform.
If you want to just store the output in App server then use the PDF output option in SmartForm attributes. Then use
OPEN DATASET.
READ DATASET.
CLOSE DATASET.
to store the PDF on app servee.
Rgd
Vivek
Reward if helps

Getting duplication of records in the out put of the report on multipro..

Similar Messages

Maybe you are looking for