Getting Error #1043: Invalid code_length=0 at runtime.

The project built fine in FB 4.6, but in 4.7, I get the following at runtime:
VerifyError: Error #1043: Invalid code_length=0
I use a number of .swcs in the build path and instinct tells me they might need to be re-exported with flash 6 with a higher player target? I only have Flash 5.5 (with a maximum player target of 10.2) so unfortunately cannot test that theory.

Hi Jayesh,
Do you mean "~/Documents/Adobe Flash Builder 4.7/.metadata/.log"? If so, here's mine:
!SESSION 2012-09-24 19:10:42.432 -----------------------------------------------
eclipse.buildId=M20110909-1335
java.version=1.6.0_35
java.vendor=Apple Inc.
BootLoader constants: OS=macosx, ARCH=x86_64, WS=cocoa, NL=en_US
Framework arguments: -keyring /Users/shane/.eclipse_keyring -showlocation
Command-line arguments: -os macosx -ws cocoa -arch x86_64 -keyring /Users/shane/.eclipse_keyring -consoleLog -showlocation
!ENTRY org.eclipse.core.net 1 0 2012-09-24 19:10:45.529
!MESSAGE System property http.nonProxyHosts has been set to local|*.local|169.254/16|*.169.254/16 by an external source. This value will be overwritten using the values from the preferences
Just to be clear, the error isn't a compile error, it's a run-time error. Here's what I get:
VerifyError: Error #1043: Invalid code_length=0.
[SWF] KartWorld.swf - 3,176,546 bytes after decompression
I've spent all day methodically trying to comment out the entire code base line by line. I really want this to work, so let me know if there is anything I can do to help.
Regards,
Shane

Similar Messages

I try to update iTunes but get error saying invalid signatures? why can't I update?

I try to install new version iTunes, safari and quick time and can't. I get error saying " invalid signatures". Why will these not install? I have windows xp.

Why? Don't know.
How to fix this...
Download iTunes again and then run the install. When his happened to me, the second download and install ran without any problem.

Unable to email a document. Keep getting error message: Invalid Date Enter 2-digit month

Unable to email a document. Keep getting error message: Invalid Date Enter 2-digit month
Does not happen with all forms which emante from same USG webpage
Any adivice?

If i am using 11G andrtp is 11g but on rtp side if they configure SSL, is it mandatory to do it from our side also?No it not mandatory to enable SSL at your end however you have to configure identity and trsut at your end.
Any update on my regular question(The main forum question)?You mentioned that you are posting message from 10g to 11g and as per log you are sending it to URL - https://dev-nog.server:443/b2b/transportServlet
So few things which I see as a problem are-
1. You should use URL https://hostname:soa_server_ssl_port/b2b/httpReceiver instead of https://dev-nog.server:443/b2b/transportServlet
2. SOA server SSL port should be enabled (SSL should be enabled on SOA server)
3. You should configure wallet at 10g side to contain trust cert of 11g server
Regards,
Anuj

When Import get Error-00904 Invalid Column Name

Hi all,
I'm using DI Premium 3.0 with Oracle 10.2.0.1.0 repository. I'm trying to connect Oracle 8.1.4.7.1 (8i) but when i going to import tables get Error-00904 Invalid Column Name. If i connect to Oracle 10.2.0.4.0 don't get error.
Trying from DI XI R2 (11.7) with Oracle 10.2.0.2.0 repository, to connect Oracle 8.1.4.7.1 (8i) don´t get error!
Is error from Oracle repository version?
Thanks in advance.
Jorge

Hi Manoj,
This is the output:
SQL> desc all_tab_columns
Name                                      Null?    Type
OWNER                                      NOT NULL      VARCHAR2(30)
TABLE_NAME                             NOT NULL      VARCHAR2(30)
COLUMN_NAME                          NOT NULL      VARCHAR2(30)
DATA_TYPE                                           VARCHAR2(106)
DATA_TYPE_MOD                                           VARCHAR2(3)
DATA_TYPE_OWNER                                         VARCHAR2(30)
DATA_LENGTH                           NOT NULL      NUMBER
DATA_PRECISION                                          NUMBER
DATA_SCALE                                                   NUMBER
NULLABLE                                                     VARCHAR2(1)
COLUMN_ID                                 NOT NULL      NUMBER
DEFAULT_LENGTH                                          NUMBER
DATA_DEFAULT                                            LONG
NUM_DISTINCT                                                 NUMBER
LOW_VALUE                                                    RAW(32)
HIGH_VALUE                                                   RAW(32)
DENSITY                                                      NUMBER
NUM_NULLS                                                    NUMBER
NUM_BUCKETS                                             NUMBER
LAST_ANALYZED                                           DATE
SAMPLE_SIZE                                                  NUMBER
CHARACTER_SET_NAME                                    VARCHAR2(44)
CHAR_COL_DECL_LENGTH                                 NUMBER
GLOBAL_STATS                                            VARCHAR2(3)
USER_STATS                                                   VARCHAR2(3)
AVG_COL_LEN                                             NUMBER
Thanks for your help.
Jorge

Getting error message "invalid formaula that cannot be compiled"

Hi,
I have installed SAP Crystal Report Viewer 2008, when tries to open output file that has RPT extension, getting error message "this report contains invalid Crystal Reports formulas that cannot be compile".
It seems it requires some DLL files that we already have but we dont know where to place it on SAP Crystal Report Viewer program files folder.
Please help me in resolving this error.
Thank you in advance.
Regards,
Manish Gupta

Manish,
If the report contains formulae that reference UFLs then it will Not work in the CR Viewer.
Following are the kind of reports that don't work with the free (standalone) CR Viewer per this SAP Note:
1. Reports that have no saved data, unless they are being accessed online from BusinessObjects Enterprise and you have the appropriate rights.
2. Reports that use Business Views as a data source.
3. Reports that use universes as a data source. (Static instances of reports that use universes will open if these reports are downloaded from BusinessObjects Enterprise.)
4. Reports that use Crystal Dictionaries as a data source.
5. Reports that use Crystal Queries as a data source.
6. Reports that depend on UFLs
7. Reports that are successfully using "Perform Grouping on Server". (That is, the generated report SQL contains a "group by" clause.)
If you want UFLs to work with the Viewer, please have a look at the 3rd-party Crystal report viewers listed at: http://www.kenhamady.com/bookmarks.html
-Abhilash

SAINT import of TU/SPS gets error 207 Invalid Column name 'area'

Hi,
I have installed a EHP5 ECC 6 system, Windows 2008 SQLServer 2008R2. Have used SolMan MaintOpz to download the additional Technical Usages (TU) like HCM and SPS to be imported into the system using transaction SAINT.
I am using the stack.xml file for the Saint import.
IMPORT phase have completed, but now I am getting an SQL error 207 duing the XPRA_EXECUTION phase when doing method execution. This stops the SAINT import and when I click on Continue button i will et the same error and SAINT will stop again.
The error is for the support package SAPKB70204 Basis Support Package 04 for 7.02.
The return code for method execution is RC 8.
When I check the log file, the errors are
SQL Error 207 Invalid colun name 'area'
Errors occurred during post-handling MSS_SDBP_AFTER_IMP for SDBP L
The error affects the following components: BC-DB-MSS
Further analysis find that it is trying to run a SQL script and the script fails due to the above error.
I read the script, it contains statements to create a table with a field name 'area' and select statements to this table.
I have tried patching the SAPEXE and SAPEXEDB kernels to the latest but still the same error. Already on the latest kernel level and dbmssslib.dll and tp and r3load and r3trans files due to the patch.
Without fixing this error, my SAINT import will never complete and I will not have a functioning ERP system. The entire team is waiting for me so plese can anyone help me? I am desperate.
Thank you for any advise or help.

Check
Note 769842 - SQL errors occur in XPRAS_UPG phase
Markus

Get error from SQL AGENT: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D024

I am running SQL Agent that executes an SSIS process from sql server1. The SSIS process executes its SQL/tables/sp’s against another sql server2.
I get an error after adding data flow tasks with transaction supported within a sequence with transaction required. The error, “The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D024 "The transaction
manager has disabled its support for remote/network transactions"
Prior to adding this sequence everything was working from sql agent, and there were other sequences with oledb destinations.
Everything works when running within SSIS Package.
I see this article on similar issue,
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0bfa2569-8849-4884-8f68-8edf98a9b4fe/problem-to-execute-a-package-and-tasks-with-a-certain-transactionoption-property-i-need-help?forum=sqlintegrationservices
“I had similar issue and solved by setting the following on both the machines. Allow Remote Clients, Allow Remote Administration,
Allow Inbound Clients, Allow Outbound Clients, and TIP are enabled in Component Services/My Computer/Properties/MSDTC/Security Configuration.”
I don’t want to remove transaction required for the “Remove Duplicates from Staging” sequence.
Anyone seen this?
Greg Hanson

DTC was running on remote computer. The problem was it was no longer accepting transactions from remote servers. This was in SSIS so I had to turn to "Transaction Supported" for all Data Flow Transactions.
Greg Hanson

Cannot complete email client form, keep getting error message "Invalid credentials check email and password"

I have Elements and Premier Photoshop 8 on my windows 7, 64 bit, computer. I just downloaded the upgrade to #13 for both. The Elements downloaded ok and transferred pictures from #8. My problem is that on 13 I cannot configure an email client so I can email my photos to other people. When I fill out the configure email client form I get an error message that says "Invalid credentials Please check your email address and password and try again" I did that and continued to receive the same error message. I entered the email address and password I use to get into my adobe account. How can I solve this problem?

Hi,
In the organizer, in the Preferences -> Email, the email address and password is not your Adobe Id, it should be your mail service provider - it could be a Microsoft Account or a Gmail.
When you normally use emails, you must have an email account with a password - use that.
If you have to use the "other" type of service provider, it needs to be configured for the SMTP service.
Brian

I am trying to upgrade to 10.5 from 10.0 ,i download upgrade ok but when i install i get error F/ invalid . i have all my media on G/ how do i change where to install to as cannot find it anywhere

Just need a little help to change destination for itunes upgrade, have downloaded 10.5 but when i go to install i get F/ invalid . my F/ drive is my camera memory card drive and all my media is on G/ drive how do i change this as not getting any help from apple other than generic message saying this is not my department and look at links
Any help would be appreciated

I don't use Windows (Thankfully!) but there should be an option in the installer to change the installation destination and I'm pretty certain the default would be on the drive Windows is installed on.

I get error message invalid serial number

I get invalid serial Number when installing

Error "The serial number is not valid for this product" | Creative Suite

Getting error message "Invalid COD" when trying to download bible software....

Anyone know why I can't download youverse bible software to my bb curve 8330, getting the "Invalid COD" message?

I had no idea where you were downloading it from, I just went off what you called it, youverse.
Keep trying later, perhaps they are having server issues.
YouVersion is a great application, had it loaded for a while and use it often.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Simple Form Problem: Cant press Enter in form without getting error message: Invalid Input

The problem is very simple,
I have several forms on my site such as the 'quick enquiry'
form on the home page about half way down.
http://www.party-invitation.co.uk/index.htm
The user enters name- Works Fine
user enters email address- Works Fine
User enters a question- This is were the problem occurs when
the users presses the Enter key. This seems to bring up a message
that says Invalid Input.
Does anyone know how i can allow people to use the Enter key
in my forms to skip lines without causing this error message?
Any help would be appreciated.
Feel free to use the form to test it out.
Thanks.
Here is my php code for the form.
<?
function checkOK($field)
if (eregi("\r",$field) || eregi("\n",$field)){
die("Invalid Input!");
$Name=$_POST['Name'];
checkOK($Name);
$Email=$_POST['Email'];
checkOK($Email);
$Question=$_POST['Question'];
checkOK($Question);
$to="[email protected]";
$message="
A Quick Enquiry has been submitted from
www.Party-Invitation.co.uk
Here are the details:
Name: $Name
Email: $Email
Question: $Question
if(mail($to,"Quick Enquiry: $Email $Name" ,$message,"From:
$email\n")) {
echo "";
} else {
echo; "There was a problem sending the mail. Please check
that you filled in the form correctly.";
?>

.oO(stuckinthesystem)
> Here is my php code for the form.
> <?
This should be <?php for portability reasons. Short open
tags are an
optional feature and can be disabled.
> function checkOK($field)
> {
> if (eregi("\r",$field) || eregi("\n",$field)){
The old ereg_* functions should not be used anymore. Better
would be
something like
if (preg_match("/[\n\r]/", $field)) {...}
> $Name=$_POST['Name'];
> checkOK($Name);
> $Email=$_POST['Email'];
> checkOK($Email);
> $Question=$_POST['Question'];
> checkOK($Question);
The last check causes the error if the user enters multiple
lines in the
text area. You can remove that check, because line breaks in
the email
body are safe.
> if(mail($to,"Quick Enquiry: $Email $Name"
,$message,"From: $email\n")) {
> echo "";
There's a typo in the last parameter. Variable names in PHP
are
case-sensitive, so $Email != $email. You should set
error_reporting to
E_ALL in your php.ini, so PHP will let you know about such
errors.
Micha

HT4623 I get error message "invalid email" when I try to log into sites

I get an "invalid email" whenever I try to log into a site with my apple phone and ipad. It is the same email I have used for 15 years.

Thank you thank you thank you. I removed the Babylon program and now I can print PDF files, thanks for your time and effort. I was going crazy. I appreciate you taking the time to answer my inquiry. Cmnman9

I get error about invalide security certificate

I have a problem with certificate , every time i visit secure sites like yahoo, paypal, alertpay ... ect. i get this error : You have asked Firefox to connect
securely to www.paypal.com, but we can't confirm that your connection is secure. After i add the site to the exception list i get this error : The certificate is not trusted because is self-signed.
I film the brownser to be easy for you to understand , hir is the link :
http://hotfile.com/dl/41402461/129b610/5-4-2010_11-28-22_PM.avi.html
== This happened ==
Not sure how often
== relly i don't know , i think a week ago

Some firewalls monitor secure (https) connections and send their own certificate instead of the website's certificate.
You can click the link at the bottom of the error page: "I Understand the Risks"
Make Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
Click the "View..." button to inspect the certificate and check who is the issuer.
Only leave the mark in the box at the bottom to "Permanently store this exception" if you trust that certificate.
Click "Confirm Security Exception" to enter the site if you still want to go to that website.
If the issuer is your security software then you either have to disable that check in your firewall or install the root certificate of that firewall. See [[Firewalls]]

Getting Error with date parameter field -"Invalid DATE"

Hi
I created a report with 9.2 version. And i created 2 date parameter fields in it. And within crystal reports it works fine.
But If, I call from the VS2005 crystalreport.net(report document) SDK , i am getting error as Invalid Date" enter a Date Value". Actually it is a dtp control. how can i modify it.

There's not enough details to get a good understanding of your scenario, but it sounds like you're using some kind of date control to retrieve the date value and pass it to the report's parameter field at runtime. If this is correct, it sounds like the format of the date value from the control may not be what the report is expecting. To debug, I would first use hardcoded values when you set the report parameter fields to see what works. Then compare that to what the return value is from the control to see if they match. I suspect the formats differ. I did a quick search on the BOBJ kbase and found a couple of articles that may help you. I recommend searching as there are lots of information on how to set parameter fields at runtime. <a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2010247&sliceId=&dialogID=8582434&stateId=1 0 8584068" target="_blank">c2010247</a><a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2010251&sliceId=&dialogID=8582434&stateId=1 0 8584068" target="_blank">c2010251</a>-MJ

Getting Error #1043: Invalid code_length=0 at runtime.

Similar Messages

Maybe you are looking for