Getting error can not find xsl file esb:///ESB_PROJECTS/...

Hi,
I have one esb project 'A' that is invoking another esb 'B' that contains transformation. Routing rules are defined from server deployed service no soap service call. So in esbsvc file it puts xsl url as esb:///esb_projects/....
When i deploy A and test it, i get error unable to find xsl file in path esb:///esb_projects/...
I tried to look into this issue, it looks like all files are stored under temp_xxx_localhost directory.
did any one find solution for it?
Note: this issue will come only if you have transformation at B service.

Have you checked the logs in enterprise manager on deployment?
Can you run esb B independently? Again via the em choose the web service end point to test.
I have not had a problem with a missing xsl. You can create test cases for xsl transformations within JDeveloper which will enable to test the validity of you transformation. But, it sound like you are already beyond this point.

Similar Messages

Getting error can not find xsl file at esb:///esb_projects/...

Hi,
I have one esb project 'A' that is invoking another esb 'B' that contains transformation. Routing rules are defined from server deployed service no soap service call. So in esbsvc file it puts xsl url as esb:///esb_projects/....
When i deploy A and test it, i get error unable to find xsl file in path esb:///esb_projects/...
I tried to look into this issue, it looks like all files are stored under temp_xxx_localhost directory.
did any one find solution for it?
Note: this issue will come only if you have transformation at B service.

Have you checked the logs in enterprise manager on deployment?
Can you run esb B independently? Again via the em choose the web service end point to test.
I have not had a problem with a missing xsl. You can create test cases for xsl transformations within JDeveloper which will enable to test the validity of you transformation. But, it sound like you are already beyond this point.

I cannot open Beats Audio. Get a, "Can not find startup file" message

I have an HP Touchsmart 320-1030 desktop w Windows 7 32-bit and cannot open Beats Audio. When I go to control panel and click on the beats icon I get a, "Can not find startup file" message

Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
```````````````````````````````````````
If still no resolution, enter BIOS setup by tapping the F10 key immedaitely after powering on the laptop. Reset to Default settings.Usually done by tapping F9 key,check bottom of screen.Svae & Exit.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Dynadock V10 - " error can not find installation file" INSTALL ERROR

Hi I have a toshiba dynadock V10.
Every time i try to install the drivers it says " error can not find installation file". I have downloaded the latest drivers and switched off my anti virus and shut off all running proiceses and no go. There are a few references to this on the internet but none has a solution.
I amn trying to install it on an equium U400 running windows 7.
Funnily enough it loaded on an old dell pc easily!
I have spent hours searching the net and there is no answer. I dont have anything showing in programs to uninstall.
Thanks

>Funnily enough it loaded on an old pc easily!
Hi
This means that drivers are ok and there must be something wrong with the system preinstalled on Equium U400.
How did you proceed?
Its important that you would NOT connect the Dynadock to the notebook before the drivers and software installation has not been finished.
Therefore you have to install the software firstly. Then after new reboot connect the Dynadock to the notebook and the installation would finish the next steps.

Had to uninstall Firefox, now I can't reinstall. Get error message "Can not find archive file." Please help!

I believe I had some kind of virus attack. I got everything cleaned up. (I HOPE) In the process of cleaning the virus, I unintalled Firefox because it wouldn't open. Kept getting the error message that Firefox was already open and I had to close out of the sessions or restart the computer. After restarting the computer several times and not being able to find any open sessions in task manager, I uninstalled. When trying to reinstall, I get the error message "can not find archive file." I've tried downloading Firefox from cnet as well as the Mozilla site to no avail. Please help. I'm getting tired of using Chrome already!

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

Summary:
I have installed Windows 7 Ultimate x64 on my G580. Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
Details:
I bought lenovo G580 with Windows 8. Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64. Everything is working fine but my WLAN card is not recognized because of lack of driver.
The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error. I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
Error - "BCM4313: Can not find setup file"
Drivers Tried:
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028105
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028208
Any help about how to get past this error will be appreciated. The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder. Let me know if I can copy a specific file from there.
Thank you.
BJS
Solved!
Go to Solution.

Download this driver bcm4313
Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

Error on boot: "Can not find script file "C:\ProgramData\Lenovo-20841.vbs".

Recently I'm getting an error dialog box on my T530 when I boot it into my OEM installation of Windows 8. The window title bar is "Windows Script Host", and the error message is:
Error on boot: "Can not find script file "C:\ProgramData\Lenovo-20841.vbs".
I pulled up an old backup, and I do have that file, along with a number of other ones that are missing from that directory. I'm attaching a screenshot of the files that are missing. Not sure why they would have been deleted (I know I didn't do it manually). Should I just restore the file? What about the other ones?
Thanks very much.

I am getting a different VBS script error than the one listed above.
Does anyone know how I can get this file? or recreate it?
I get a similar message saying that it can't find the file c:\programdata\Lenovo-11472.vbs
Also, my wireless just randomly resets - sometimes very few minutes - after I've been using the system for a while. It's brand new and I can't figure out what's going on. Could this be the issue?
When I restart, it stays stable for a while and then starts acting up again.
Thanks for your help!

Using windows xp and ver 5.0.1. When opening firefox I get a can not find error, then the window appears.

Since I updated or auto updated to Firefox 5.0.1 I get a windows error, can not find when I try to open Firefox from the icon.

It fixed opening Firefox, but when I click Yahoo mail or Hotmail I still get a error message. I only seen a Yahoo Messenger in file folder, which I changed like I did for Firefox with no results. Thanks for your help.
Wayne

When I try to install Firefox, I get a "can not open output file" error. I was using Firefox before and it stopped working, so I uninstalled. Cannot re-install now.

When I try to install Firefox, I get a "can not open output file" error. I was using Firefox before and it stopped working, so I uninstalled. Cannot re-install now.
== This happened ==
Every time Firefox opened
== I tried to download firefox. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS-RTC LM 8)

When you click the download link on [http://getfirefox.com GetFirefox.com], you should be asked if you wish to Run or Save the file. If the described situation happens when trying to Run the download, try instead to Save it and put the file on your Desktop or a similar place where you are certain that you can find it again.
When the download is complete, try double-clicking the downloaded file in the normal Windows Explorer (browse your way to the file from My Computer). This should start the installation.
If you notice in the Explorer window that the file seems to be lacking the Firefox orange/blue icon, rightclick the file and select Properties. The picture should look somewhat like the attached picture (except that mine's in danish, but that is irrelevant) if saved correctly - if it does NOT look like this, please describe the contents or attach a screenshot of the box. Especially what it says under "File type" - it should be "Program"; if it's not, we'll have to look into what the problem could be here.
Slightly off-topic, your Internet Explorer seems to be quite a bit out of date (IE 6, where current version is IE 8), so I would strongly recommend that you try to run Windows Update to get your system updated. If this is a company system (like a Terminal Server thin client machine), this may not be possible, and your system administrator will most likely have to help you.

Trying to install iTunes 8.0, can not find script file error

I recently tried to upgrade Win XP for iTunes 8.0, and got the following error msg:
can not find script file “C:\program files\uninstall scripts\quicksilver player 7.4\install.wsf”
HELP!
Tony

Hey Tony, you don't happen to work for a large aerospace company, do you? My guess is that you do, because I work at the same place, and the problem is with our company's distribution of quicktime. email me off list and I'll tell you how to fix it.
bralston at mac dot com

Bearts Audio Control Pannel will not open. Get error message cannot find startup file

Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500Z

Hi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I by accident deleted an important Note that had all my passwords on my Notes Ap on my Iphone 5. I can not find a file that has deleted Notes files so I can recover it. Any idea how I can get it back? Thanks,Mike

I by accident deleted an important Note that had all my passwords on my Notes Ap on my Iphone 5. I can not find a file that has deleted Notes files so I can recover it. Any idea how I can get it back? Thanks,Mike

Do you have a backup of your iPhone? If so, do a restore and whatever Notes were backed up should reappear.
You will lose any changes made since that backup though.

Keep getting can not find %appdata% file when trying to download itunes. do you know of a fix?

Have HP600PC with Windows 7 64-bit. Keep getting Can not find %APPDATA% file when I try to download Itunes and other software. Do you know of a fix?

Here you go, this should do it.
http://support.microsoft.com/kb/2258121

Error: Could not find the file "flash.ocx"

I have been receiving the error COULD NOT FIND THE FILE
"FLASH.OCX" for the past couple of months - I have been watching
the message boards and have seen a lot of "fixes" and beta's come
up errors (not sure that it's this exact error though).
I get this error continuously throughout the day - no matter
if I have nothing running on my computer or I have 10 things open.
This morning it occurred to me that my screen saver is not coming
on and it seems to me that the above errror is popping up everytime
my screen saver should start. I HAVE TIMED THIS TODAY AND CHANGED
HOW LONG BEFORE MY SCREEN SAVER STARTS - AND IT IS DEFINITELY
GETTING THE ERROR EVERYTIME THE SCREEN SAVER IS TRYING TO START.
Last week, I deleted the version of Flash that I had and then
re-installed; still getting the error.
I was getting the error when I had IE6 so I thought maybe
switching to IE7 would correct it - but it didn't (that was a few
weeks ago).
My computer does not freeze up but it is SOOO annoying to
continually throughout the day get this error.
IE7.0
ADOBE 9,0,28,0
WINDOWS XP - SP2
PLEASE HELP!

Ah-ah! The workaround is to map my network folder to a drive, say... M:\
So, when I select Edit->Edit in Audition->Sequence, I can select the Browse button to alter the Path destination. Instead of seeing '\\Zeus\Projects\...', I select the mapped M: drive so the path reads 'M:\Projects\...' instead.
Then, Audition loads and is able to find the sequence or clip.
So... that solves my problem!

Sysprep and Capture Task Sequence Fails "Can not find script file C:\LTIBootstrap.vbs"

I've just installed Windows 8 on a Lenovo ThinkPad T440s using Lenovo's recovery discs. I did not join it to a domain. I logged in as Administrator, navigated to our deployment share, and ran Scripts\LiteTouch.wsf. I selected the new Sysprep and Capture
Task Sequence that I just made, told it to upload to DeploymentShare$\Captures, then started the Task Sequence.
It seemed to run fine until after the first reboot. Windows 8 configured the PC for a while, then displayed an error that it had been shut down unexpectedly. I wasn't sure if this was normal, so I just clicked OK. Then I got an error that said "Can
not find script file C:\LTIBootstrap.vbs". After clicking OK on that, I am brought to the desktop.
The image cannot be found in DeploymentShare$\Captures. Under the Monitoring section of the DeploymentWorkbench, I can see that MDT thinks the Task Sequence is still running on the machine (though it is not), with progress stuck on step 16 of 23: Execute
Sysprep. There are 0 errors and 0 warnings listed.
BDD.log is too long to post all of it, but here's the last few lines in case that's helpful.
<![LOG[BCD> The operation completed successfully.]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Run Command: C:\windows\SYSTEM32\bcdedit.exe /default {d22e7e91-9ee7-46eb-89d7-c5859e4302f0}]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCD> The operation completed successfully.]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property BootPE is now = True]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[LTI Windows PE applied successfully]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41019 sent: LTI Windows PE applied successfully]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[LTIApply processing completed successfully.]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41001 sent: LTIApply processing completed successfully.]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
I would greatly appreciate any assistance determining what went wrong and how to correct it. Thank you.

You might get teh c:\LTIBootStrap.vbs error if you are running SysPrep with a unattend.xml template that contains the c:\bootstrap.vbs template, yet you are *NOT* deploying the image with MDT Litetouch, instead just applying the image to the final machine.
Crack open your install.wim file and search for the unattend.xml file in the normal places to see what it is.
I am concerned about the "shut down unexpectedly" error. There should be no shutdown state information left from a captured *.wim file.
If you still need assistance, please feel free to copy the bdd.log file to a public site like OneDrive, and share the link.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Getting error can not find xsl file esb:///ESB_PROJECTS/...

Similar Messages

Maybe you are looking for