Getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

Without knowing anything about your system, your image file, your working document and so on nobody can even begin to guess. The file could be damaged, there could be color management issues at play and what have you...
Mylenium

Similar Messages

  • Could not complete the command because there is not enough memory (RAM)

    Hi Folks:
    I am running into an error (Could not complete the command because there is not enough memory (RAM)) when trying to open any file of any size or any format.on my Mac.
    This error occurs when:
    No other applications or files are open
    Upon a fresh reboot
    After Repairing Disk Permissions
    The files can be opened by Fireworks and other image editor apps or video apps
    My SPECS:
    OSX 10.5.8
    4GB 667 MHz DDR2 SDRAM
    120.41 GB Free space available
    Graphics: GeForce 8600M GT - VRAM 512 MB
    PhotoShop settings:
    Available RAM 3072 - Let PS use 90% (2764)
    I really appreciate the help.

    http://forums.adobe.com/thread/370739?tstart=0
    http://forums.adobe.com/thread/370735?tstart=0

  • Lighting effects not working, 'Could not apply the workspace because there is not enough memory (RAM)' with 4GB RAM?

    Tried to use 'render/lighting effects' on 5 more or less new different laptops now. All kind of Window versions.
    They all have at least 4GB RAM. The Graphic Card is compatible.
    Layer to work on is RGB-Type.
    It's all about Photoshop CC 2014, trial version.
    When I go to 'Lighting effects' it says first:
    'The 3D features require that 'Use Graphics Processor' is enabled in the Performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly.'
    - I switched the 'Use Graphics Processor' on and off and restarted new - nothing happens.
    - Video card is compatible.
    Second it says:
    ''Could not apply the workspace because there is not enough memory (RAM)'
    - RAM on all the computers I tested it with is at least 4GB
    Please help!

    We would need to know the amount of Video ram you have. If it is above 512 MB, then check for driver updates.
    Windows OS
    Click Start.
    On the Start menu, click Run.
    In the Open box, type "dxdiag" (without the quotation marks), and then click OK.
    The DirectX Diagnostic Tool opens. Click the Display tab.
    On the Display tab, information about your graphics card is shown in the Device section. You can see the name of your card, as well as how much video memory it has.
    Once you know the kind of graphics card you have, visit the manufacturer's website to download the latest driver. Here are links for downloading drivers from the most common graphics card manufacturers:
    NVIDIA: http://www.nvidia.com/content/drivers/drivers.asp
    AMD: http://support.amd.com/en-us/download
    Intel: http://support.intel.com/support/graphics/

  • The operation cannot complete because there isn't enough memory (RAM) available

    Illustrator CS5 Verison 15.1 on a MacBook Pro Retina, 15-inch, Early 2013 Processor  2.7 GHz Intel Core i7, Memory  16 GB 1600 MHz DDR3,
    Graphics  NVIDIA GeForce GT 650M 1024 MB. Illustrator opens .ai and .pdf files. When I try to open a .dwg file, I get the following message, “The operation cannot complete because there isn’t enough memory (RAM) available”. I have been using the program for some time to successfully open .dwg files. This is a recent occurrence and I have not made any changes to the hard drive other than installing OS 10.9

    Have you already opened that specific file at some former time?
    Have you already tried a restart?
    Apart from that:
    Illustrator CS5 cannot use more than 3 GB of RAM, no matter how much is installed. OS 10.9 causes all kinds of problem even with newer versions of Illustrator.

  • Ai - The operation cannot complete because there isn't enough memory (RAM) available.

    Hi I got this message "The operation cannot complete because there isn't enough memory (RAM) available." when I was trying to scale the image or transform it to 3D. I just signed up for Adobe Creative Cloud a few days ago. Please help. Thank you.

    Have you already opened that specific file at some former time?
    Have you already tried a restart?
    Apart from that:
    Illustrator CS5 cannot use more than 3 GB of RAM, no matter how much is installed. OS 10.9 causes all kinds of problem even with newer versions of Illustrator.

  • CS5 - The operation cannot complete because there isn't enough memory (RAM) available

    Hi,
    I keep getting the above message whenever I try to perform any 3D functions in Illustrator. I have Adobe Premium CS5 V5 and am using Windows 7 Proffesional on 2 machines:
    desktop pc:
    Core i5 3.33Ghz/4Gb Ram with an independant graphics card: ATI Radeon HD 4550 (512mb Ram)
    and a laptop:
    Core i5 2.4Ghz/6Gb Ram with Geforce 310M graphics.
    Both are brand new setups and I am local administrator for both machines.
    The Pagefile has now been set to 3x Ram size (was originally managed by Windows) to see if it resolved the problem but it has not.
    Can anyone help with this? we have invested a lot of money both in equipment and software (i.e. 2xAdobe Premiums!) to avoid issues like this.
    Many Thanks

    Hi Wade,
    Many thanks again for your continued (and quick) responses.
    It seems a bit harsh (of Adobe) that we need to put in extra hardware just to keep the program alive. Particularly when both machines far exceed the requirements stipulated by Adobe's site:
    http://www.adobe.com/products/illustrator/systemreqs/
    If I was trying to speed things up or edit something really big, then I could understand the need. But I really am not trying to do anything that demanding.
    Just to add, I have noted that I have not set the program to run as administrator, and have remedied this (something in Windows Vista and 7 that allows a user to be administrator but elevating the level of programs is separate. I will monitor to see if this makes any difference also.
    Please don't read this as not appreciating the suggestion. We are really getting to stages where we will try anything (i.e. an extra drive will be put into the desktop if, my latest settings change does not work and I can get it authorised).
    I'll keep you posted.

  • The operation cannot complete because there isn't enough memory (RAM) available? Anyone had this issue?

    I was working on a file, closed it briefly, then reopened it but didn't open and continued to get the message that I don't have enough memory.
    The file is not huge at all. 41.3 MB
    Anyone had this issue before? Need help soon. Need to send this file to the printer.

    OK. I figured it out. I just opened the file on Illustrator CS5 instead of CSS. It opened fine, but still didn't resolved the issue why CSS couldn't open that file, but CS5 can.
    If anyone has an answer for that, I would really appreciate it.
    Would prefer to send files to the latest software versus using an older program.
    Thanks!

  • Could not complete the command because there is not enough RAM

    i have already made a few changes to an image but when i try to Distort>Wave then click ok it comes up with that message. i have looked on other forums which say to allocate more memory to photoshop but that doesn't work for me. Any ideas?

    You did not say which verson of PS you are using.  If CS5 and a 32 bit system you are handicapping youself.
    Works best in 64 bit mode with 6-8 gigs of RAM.
    If you are limited you keeping what you should also check you have enough free area on the scratch disk.

  • CS6 CS5  "operation can not complete because there isn't enough memory (RAM) available"

    Hi,
    I told the client (rather foolishly it seems) that I could open a DXF in Illustrator CS6.  I get the message shown even though I have 8g of ram
    any ideas??
    It refuses to open in cs5 as well
    file is 4.2mb
    thanks
    G
    iMac 27" 2.88 i5
    OSX 10.6.8
    8g ram
    CS6
    CS5

    A .dxf of 4.2Mb seems large, must be something else in there than a die line. Did they send you a .pdf with this so you know what this looks like. Also if they did not put dimensions on there that can be a hassle as often you have to try every unit you figure out what units the operator was wiring in.
    If you can post the file (hightail has a free trial), I have 32gb and can try this for you.

  • "Can't copy the type. There isn't enough memory. ID=-108"

    I'm running Illustrator, Dreamweaver, Fireworks, Photoshop, iTunes and Suitcase. In Illustrator I get an error: "Can't copy the type. There isn't enough memory. ID=-108"
    How is this possible with 4gb of ram and 242 gb available on my hard drive? Is my new MBP a lemon?

    Illustrator itself it's what's short of memory, these tips apply to After Effects and the same error message so see if you can apply them in Illustrator.
    http://kb.adobe.com/selfservice/viewContent.do?externalId=320043&sliceId=2

  • Error - Could not place the document 'IMG_1664.MOV' because no parser...

    I am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
    Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
    The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. Can anyone help as Im desperate to try out the new features of CS6 for video editing.
    I am running a 27" iMac with 12gb RAM and 1gb of Video RAM. Any help would be very much appreciated as im at a complete loss and there seems to be very little about this problem on the net at the moment. I am also running Lion if that helps.
    Thanks
    James

    I was getting the same error message when trying to instal a simple brush in CS6 64bit, I saved my work and backed out of the program and opened the regular (i'm guessing 32 bit) program and tried to instal them there. It worked no problem. That would be my suggestion to you to see if it is an error in both formats of CS6 and if it works, it might be something to let adobe know is an error that needs be fixed or at least addressed to the general public as to why it won't work. I beleive you should have received both version with your install. I did anyways.
    Best wishes

  • Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message  Can't install the software because it is not currently available from the Software Update server.

    Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message  Can't install the software because it is not currently available from the Software Update server. Please help.

    Installing an HP network printer

  • Could not print "image name" because there is not enough memory (RAM).

    I cannot print anything from Photoshop CS5. I always get the message:
    Could not print “image name” because there is not enough memory (RAM).
    I'm using Mac OS 10.6.8, with 8 GB RAM. I have tried setting memory usage to 100% of RAM (7379 MB for me). The "Ideal Range" is 4058-5313 MB. I cannot print anything, not even a 20 kB  file because I always get that error message.
    I've tried unistalling & reinstalling, just to see if that did anything. It didn't help.
    Does anyione have any ideas for what the problem is?
    Thanks,
    Dan
    (I don't have a problem printing from any other programs, like Gimp, but I want to print from Photoshop because of they way it allows you to adjust what part of the image you print when you are cropping the image during printing.)

    shanahan3030 wrote:
    …have tried setting memory usage to 100% of RAM (7379 MB for me…
    That is never a good idea.  You're starving the OS of RAM.  Try pulling it back to 70% or less.
    Also, clarify how much disk space you have left on your boot drive and on your scratch drive.

  • 2146827284Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space

    Hi Experts,
    I am getting below error when Exporting data from my one web application to the Excel 2010 on Windows Server 2008 R2 ,
    02/29/2012 18:54:50
    Type : System.Exception, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b11a5c481859e569
    Message : -2146827284Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space.
    • To make more memory available, close workbooks or programs you no longer need.
    • To free disk space, delete files you no longer need from the disk you are saving to.
    The disk space is 30 GB free, I have cleared all the temp files, increased the virtual memory & internet temp files size to max but no luck

    You want to use this one here - MMC
    comexp.msc /32
    THAT will launch the MMC process
    as 32 bit then you'll the Microsoft Excel Application.
    Right Click -> Properties.
    What I did at this point was to select the Identity tab and then select "The Interactive User" (the default was "The launching user").  My app pool was already running as "LocalSystem".  I believe by running it as the Interactive User now that it
    has the right permissions to save workbooks.
    Everything worked after this.
    This was a tough one!
    R. Matt Sampson

  • "no photos were copied to the ipod because there is not enough free space"

    i've been trying to download photos on my nano for weeks and i always receive this message :
    "no photos were copied to the ipod because there is not enough free space on the ipod to hold your photos and albums."
    the weird thing is that there IS free space; i actually made some (there are 18 available MB right now on my nano). and the folder containing the photos i am trying to download is far from 18 MB. but i still get the same message.
    anyone knows what i could do?? thanks!!

    R U sure you have enough space? Double check to make sure you are only trying to upload the pictures you want on your ipod not all the pictures on your computer (more than 18 MB).

Maybe you are looking for

  • How to see how many users are working on a Dynpro application?

    Hello, Is it possible to see somwhere at the portal or on the WAS how many users are currently working with my Web Dynpro application?

  • Using MIDI cable with M-Audio FastTrack  Pro

    I have 2 keyboards. One has USB MIDI, so I just plug it directly in to my computer and Logic sees it. I also have a nicer keyboard (weighted keys), but this one doesn't have a USB out. It has a 1/4" jack and a 5 pin MIDI jack. I've tried plugging it

  • Why is safari hidden behind my Macbook (OS X 10.5.8) desktop screen?

    When I click on Safari only half of the address bar shows. All web pages are hidden by the desktop Screen. This is not true of Firefox. Many thanks if someone can help.

  • Moving clips between movies

    What's the best method to split an iMovie in 2 or move clips from one movie to another? I've tried 3 methods which sort of work but I was wondering if there's a more efficient method. 1. Copy entire movie and delete unwanted footage from each copy. T

  • WebEx Productivity Tools for Mac

    I have a MacBook Pro 15 Retina running Yosemite 10.10.2 and MS Office for Mac 2011.  I installed the latest version of WebEx Productivity Tools for Mac, the installation completed just fine, the WebEx icons hooked into Outlook OK.  But every time I t