Getting error " Incomplete update due to error in single records"

Dear All,
We are loading data from DSO to Cube using full load and the load is failing giving an error message Collection in the source system ended and when checked the error message button it is showing as  " Incomplete update due to error in single records" . and also one more message "Messages (type E) for data records with record number 0
Message no. RSM2714". Can any one tell us the reason for the failure of this load ? and how to resolve it ?.
When we click on the help button of the error message it is displaying the message as below
Incomplete update due to errors in single records --> Long text
Message no. RSM2712
Diagnosis
In the update rules, one InfoSource record was used to create several records in the data target. These records must be handled in the same way to enable tracking into the PSA and the treatment of errors in individual records.
In the previous case, one record was updated in this kind of group generated by update rules, whereas other records in the same group were rejected. If you updated the PSA data record again, the records that were already updated would be updated again. Duplicate records would appear in the data target and the data target would thus be inconsistent.
System Response
The data record with errors was highlighted in the PSA. However, no error request was generated.
Procedure
Delete the request in the data target and, after removing the error, update all records for the request to the data target again.
Regards,
JayaKrishna

hi,
Can you please check out the PSA error record and check this out in Source DSO as this load is for DSO -> Cube....
Please correct it in PSA if this is not correct as per DSO ....prior correcting data in PSA pls delete the request from Cube.....then it will allow to correct or delete record in PSA and then further push data from PSA to Target Cube...
If its correct as per DSO then run load in DSO sometime few records wrongly updated by  end user and they correct it by evening for Submission....So u will get the corrected record and then run manually further load to Cube...
Hope this will help....
Regards,
Mahesh

Similar Messages

  • HT201210 trying to update my iPhone 4 to latest 5x ios and getting a "cannot update due to firmware not compatible

    Trying to update iPhone 4 to the latest iOS 5, the error "cannot update due to incompatible firmware" prevents install. Any idea on where to find firmware update or resolve?

    The correct way to upgrade the firmware is to first assure that you have the latest version of iTunes, then connect the phone to your computer. Click on the name of the phone in iTunes, then "Check for Updates" on the iPhone Summary screen. It should tell you there is a new version, and ask if you want to upgrade to it. If you are using any other method, or you downloaded a firmware file from a web site, you are asking for trouble.
    The only thing you might want to do is to delete any .ipsw files on your computer before doing the above, in the unlikely event that the update file was corrupted during download.

  • Simulate update in Transformation using a single record

    In an update rule, it was possible from the monitor to simulate the update of an infoProvider.  During the simulation, you could choose to select only certain records of the PSA for simulation. This was very useful if you wanted to simulate only a single problematic record.
    In a transformation using a DTP, I can find out how to add the breakpoints and debut a start routine in a transformation, but I cannot find a way to do that simulation using only a single record from the PSA.
    The only option I can find is to create a DTP that has a filter that restricts the PSA down to a single record, but this is time consuming as you first have to find a way to filter the PSA to select a unique record.
    I have tried to use the ENTER DATA PACKAGE when setting the breakpoints, but this does not seem to allow this to happen.
    Is there a similar function in the DTP that allows you to simulate the update on a single selectable record?

    Hi Kevin,
    this function is not available from the transformation, yet check the DTP, where you can set the processing to serial. You can then change breakpoints at the processing steps of the DTP, and will also be asked to enter for which package you want to simulate the DTP or use the expert mode [next to processing mode] (I hope this is correct since I couldn't verify it in the system due to time constraints).
    Please search also the forum, since the topic simulation of DTP was already a topic here.
      Cheers
         SAP NetWeaver BI Organisation

  • Why am I getting error msg: Pairing Record is Missing?

    I have been syncing my iPhone with my Win7 PC for several weeks now, but I am suddenly getting the error message: "iTunes could not connect to the iPhone because the pairing record is missing".  What does this mean, and why has it occurred?  I've rebooted both my PC and the iPhone several times, with no luck.  Just a few hours ago I successfully synced, and nothing's been changed on either device, but now I cannot sync.  Thank you.

    Do this:
    Unplug your iPhone from your computer
    Tap on the iTunes app
    Scroll down to the bottom
    Tap on your AppleID
    Sign out
    Sign back in
    Plug your iPhone back into your computer
    Your iPhone should now be recognized by iTunes.

  • Getting error when record type is used

    Hi Experts,
    Getting error when using record type as in parameter.
    PLS-00306: wrong number or types of arguments in call to 'SAL_UPDATE_PROC'
    PLS-00302: component 'ENAME' must be declared
    PLS-00302: component 'SAL' must be declared
    CREATE OR REPLACE PACKAGE emp_details_proc
    IS
    TYPE emp_record IS RECORD
    (empno emp.empno%TYPE,
    ename emp.ename%TYPE,
    sal emp.sal%TYPE);
    TYPE emp_type is TABLE OF emp_record INDEX BY binary_integer;
    PROCEDURE EMP_PROC;
      PROCEDURE sal_update_PROC
      (    p_rule in  emp_type
         , p_deptno in number
         , p_job in number
    END;
    CREATE OR REPLACE PACKAGE BODY emp_details_proc
    IS
    PROCEDURE EMP_PROC
      IS
        V_DEPTNO NUMBER := 10;
        V_JOB VARCHAR2(20):='CLERK';
      BEGIN
    for rc in (SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno)
             loop
                  sal_update_PROC
                  (  p_rule => rc
                    , p_deptno => V_DEPTNO
                    , p_job =>V_JOB
      end loop;
    EXCEPTION
         WHEN OTHERS THEN
    DBMS_output.put_line(SQLERRM);
    END;
      PROCEDURE  sal_update_PROC
      (    p_rule in  emp_type
         , p_deptno in number
         , p_job in number
      IS
        V_ename VARCHAR2(20);
        V_SAL NUMBER;
      BEGIN
          V_ename := p_rule.ename;
          V_sal := p_rule.sal;
            IF V_sal <=3000 THEN
            UPDATE EMP SET sal=sal+v_sal*10 WHERE ename=v_ename;
            commit;
          END IF;
    dbms_output.put_line(v_ename||'   '||v_sal);      
          END;
          END;
    Instead of this
    SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno;
      PROCEDURE  sal_update_PROC
      (    p_rule in  emp_type
         , p_deptno in number
         , p_job in number
    If I use
    SELECT * FROM emp where deptno =v_deptno
      PROCEDURE  sal_update_PROC
      (    p_rule in  emp%ROWTYPE
         , p_deptno in number
         , p_job in number
      I am not getting any error.
      Please help me.Why I am getting error what is wrong in my code.
      Thanks in advance.

    for rc in (SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno)
             loop
                  sal_update_PROC
                  (  p_rule => rc                        
                    , p_deptno => V_DEPTNO
                    , p_job =>V_JOB
    p_rule => rc       --> What exactly in rc? It's just a counter. You are using this (SELECT EMPNO,ENAME,SAL FROM emp where deptno =v_deptno)query but not using a single value returned from this query in the code.
    Ishan

  • Getting error Data record has grouping value "" in

    Trying to change Address data in HR using BAPI_ADDRESSEMPUS_CHANGE
    Getting error message : Data record has grouping value "" instead of ""
    Please advise.
    Thanks,
    Bhaskar

    Hi,
    I assume the following system situation exists:
    The new Infotypeframework NITF is inactive for PA30. Flag CCURE PC UI is activated in T77SO. You are using ESS based on Web Dynpro which uses the new Infotypeframework.
    Here we have to differentiate between infotypes which are participating in the data sharing functionality and all other infotypes. Such as:
    Infotypes without Data Sharing:
              - Infotype checks     => module pool
              - Infotype update     => SAPFP50P/SAPUP50R
    Infotypes with Data Sharing:
              - Infotype checks     => module pool
              - Infotype update     => NITF
    ATTENTION:
    BAdI HRPAD00INFTY is not processed in this case (importing parameter NEW_IMAGE is always space). Instead the BAdI HRPAD00INFTYDB of the NITF is been processed.
    The following notes (1 and 2) will solve the problem. Note 3) solves an involving problem caused during the deletion process of a personnel number.
    1) 783499 - Incorrect framework synchronization
    2) 845592 - Incorrect framework synchronization - Retroactive accounting
    3) 844998 - PU00: Termination when deleting a personnel number
    Hope this will help!
    Regards,
    Sibylle

  • Master Delta Load - Error "38 Duplicate records found"

    Hi Guys,
    In one of our delta uploads for a Master data we are getting error "38 Duplicate records found". I checked the PSA data but there were no duplicate records in that.
    Once the data upload fails I manually update the failed packet and it goes fine.
    Please any one have solution for this.

    Hi
    You can see the check box in the Processing tab page. Make a tick mark for the check box Ignore Duplicate Data Records indicator . When multiple data records that have the same key are transferred, the last data record in the request is updated to BI. Any other data records in the request with the same key are ignored.
    Help says that:
    To maintain consistency, ignoring duplicate data records is only possible if the data is updated serially. A serial update is when data is first updated into the PSA then, after it has been successfully written to the PSA, it is updated into the master data or text tables of the InfoObject.
    If a DataSource transfers potentially duplicate data records or if you manually set the Ignore Duplicate Data Records indicator, the PSA Only update type is automatically selected in the scheduler.
    hope it clears ur doubt, otherwise let me know.
    u can see the same in my previous thread
    Re: duplicate records found while loading master data(very urgent)
    Regards
    Kiran

  • My iphone 5 got suddenly slipped into recovery mode when i was updating my phone with the latest update. I request the officials to act fast and come up with a recovery solution because the phone is unable to get restored on itunes due to error 3

    My iphone 5 got suddenly slipped into recovery mode when i was updating my phone with the latest update. I request the officials to act fast and come up with a recovery solution because the phone is unable to get restored on itunes due to "error 3" when ever i am trying to restore and neither of the istores have the solution for the same.

    Hi, Milanista5
    Thank you for visiting Apple Support Communities.
    When experiencing issues restoring or updating an iPhone, here are the best articles to go through.  If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    iOS: Troubleshooting update and restore issues
    http://support.apple.com/kb/ts1275
    Cheers,
    Jason H.

  • While updating iphone software to 5.0.1, I am getting error message that Iphone cound not be updated because the firmware file is not compatible. Can anyone help me to resolve this issue.

    While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
    Can anyone help me to resolve this issue.

    Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
    First did a full back up of  iphone using iTunes
    Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
    Disconnected USB cable from iphone
    Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
    Pressed and kept holding Home button while plugging cable back into phone
    I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
    Recovery Mode alert came up in iTunes.
    Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
    iphone did not appear in iTunes due to missing pairing file (that made me nervous)
    iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
    Eventually the iphone asked if I wanted to restore from a back-up (whew!)
    A window opened in iTunes and I was able to select my previous back-up file for the restore
    A full restore from back-up then occured
    I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
    When the restore was done I had to re-enter some passwords, but everything was there
    iOS is now 5.0.1 (9A406). The whole process took about an hour.

  • Getting error while importing SPAM update

    hello ,
    We are getting folowing error while updating SPAM :
    The import was stopped, since an error occurred during the phase
    CHECK_REQUIREMENTS, which the Support Package Manager is unable to
    resolve without your input.
    After you have corrected the cause of the error, continue with the
    import by choosing Support Package -> Import queue from the initia
    screen of the Support Package Manager.
    The following details help you to analyze the problem:
        -   Error in phase: CHECK_REQUIREMENTS
        -   Reason for error: TP_CANNOT_CONNECT_SYSTEM
        -   Return code: 0208
        -   Error message: error in transportprofil (param missing,
            unknown,...)
    Also checked tp connect SID getting error :
    This is tp version 340.16.41 (release 640)
    E-TPSETTINGS could not be opened.
    EXIT
    ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
    Error in TPSETTINGS: transdir not set.
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0208
    tp finished with return code: 208
    I also checked the permissions , all are right...
    any help would be appreciated...
    thanks
    Anju

    Hi,
    Please find the below I think it may help you :
    CHECK_REQUIREMENTS
    This phase checks various requirements for importing a Support Package. This phase may terminate for the following reasons:
    ¡        TP_CANNOT_CONNECT_TO_SYSTEM: tp cannot log on to the database of the system.
    ¡        QUEUE_NOT_EMPTY: There are incompletely processed OCS requests in the tp buffer. Use the following tp command to display these requests:
         tp SHOWBUFFER  -D SOURCESYSTEMS= TAG=SPAM
    You can only continue to import the queue after these requests have been completely processed, or deleted from the tp buffer.
    Regards
    Sreedhar Reddy.A

  • Server 2012 In-place upgrade to 2012 R2 error. Error upgrading: Setup can't continue. Restart the computer and restart Setup. When prompted, try getting the latest updates

    Trying to upgrade server 2012 with RDS role on it, to server 2012 R2.
    It stays for a while on step "Collecting files, settings, and applications 0%"
    and then returns the error:
    Error upgrading: Setup can't continue. Restart the computer and restart Setup. When prompted, try getting the latest update
    Installed all the latest updates, rebooted, also tried to to run setup with local admin, still the same.
    Setup logs contain user profile related errors:
    [0x08039d] MIG    Cannot add mapping for user profile C:/Users/Administrator.001. Error: 32: Win32Exception: The process cannot access the file because it is being used by another process. [0x00000020] __cdecl Mig::CIndirectKeyMapper::CIndirectKeyMapper(class
    UnBCL::String *,struct HKEY__ *,class UnBCL::String *,class UnBCL::String *,int,int,const Mig::HiveLoadRetryOptions *)[gle=0x000000cb]2014-08-17 03:30:13, Error      [0x080801] MIG    User profile loading error. Aborting
    due to external request.[gle=0x000000cb]

    I was able to get past "Collecting files, settings, and applications 0%" by disabling user profile disks, but then on reboot I got another error:
    Setup can't continue. Your computer will now restart, and your previous version of Windows will be restored.
    Setuperr.log
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:11:43, Error      [0x0808fe] MIG    Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:15:12, Error      [0x0808fe] MIG    Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
    2014-08-17 04:15:23, Error      [0x0808fe] MIG    Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Failed to read machine binding, hr=0x80070002
    2014-08-17 04:15:23, Error      [0x0808fe] MIG    Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Error reading Server Info hr=0x80070490
    2014-08-17 08:52:44, Error                        Mig::CUpgradeTransportPlatform::SetUserContext: Offline platform failed to set the user context
    USER00000000[gle=0x000000cb]
    2014-08-17 08:52:44, Error                 MIG    Mig::CKnowledgeManager::BeginProcessingContext: Source platform failed to set the user context USER00000000[gle=0x000000cb]
    2014-08-17 08:52:44, Error                        MigApply caught exception: Win32Exception: Can't switch to requested user context: USER00000000.:
    A device attached to the system is not functioning. [0x0000001F] int __cdecl Mig::CKnowledgeManager::Apply(class Mig::CPlatform *,class Mig::CPlatform *,class Mig::CPlatform *,class Mig::CUserMappingList *,class UnBCL::Hashtable<class UnBCL::String *,class
    UnBCL::String *> *,class Mig::CAgentManager *,struct IMigExecuteProgress *)[gle=0x000000cb]
    2014-08-17 08:52:44, Error                 MIG    pDoOnlineApply: Apply operation failed. Error: 0x00000004[gle=0x000000cb]
    2014-08-17 08:52:44, Error      [0x0802f5] MIG    CMediaManager::Close: m_pSelectedTransport->Close(1) failed with Exception Win32Exception: Device was open with readonly access.: Access is denied. [0x00000005] void
    __cdecl Mig::CMediaManager::CloseTransport(int)
    void __cdecl Mig::CUNCTransport::Close(int).[gle=0x000000cb]
    2014-08-17 08:52:44, Error                        MigCloseCurrentStore caught exception: Win32Exception: Device was open with readonly access.:
    Access is denied. [0x00000005] void __cdecl Mig::CMediaManager::CloseTransport(int)
    void __cdecl Mig::CUNCTransport::Close(int)[gle=0x000000cb]
    2014-08-17 08:52:47, Error                 MIG    Callback_ApplyNewSysMachineSpecific: Migration phase failed.

  • Getting error while trying for software update although ios 7.1.1 version is released

    Getting error while I am trying to search the ios 7.1.1 update

    Hey there YashasManju,
    It sounds like you are unable to update to iOS 7.1.1 due to an error message. I would start with the troubleshooting from the following article to help resolve the issue:
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    If you are getting a specific error message, you may be able to find it in the following article and troubleshoot accordingly:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Failed to start ranking update due to this error - Authoritative Pages

    Hello together,
    i always get an error if i add an Authoritative Web Page and use the Option "Relevance Ranking Analytics".
    The error is:
    Failed to start ranking update due to this error: Failed to connect to system manager. SystemManagerLocations: net.tcp://SERVER/64BFD2/AdminComponent1/Management
    Does anyone have a solution?
    The Search Service component´s are running!
    Best Regards
    Darius.K

    Hi! I had this issue and I was able to resolve it by retrying from an application server (I was trying to run from an Index server and that's not where the admin component was located in my topology)

  • Discussions Account couldn't be updated due to system error?

    Like everyone else, I was excited to check out the new Support Communities design and functionality when it was launched on Saturday. Unfortunately, when I tried to sign in, I got a message that said: "We're Sorry. Your account couldn't be updated due to a system error." It gave me a short form to fill out for help. I did that and still am not able to sign in. Right now, I'm writing from an old Apple ID in order to post this message. The ID that I normally use (and can't use now) has lots of posts, points, etc, and I really need to recover that.
    Interestingly, if I search for the username associated with that Apple ID, it comes up and shows all of my posts and my profile, with all of my points intact. So, the information is still there...I just can't access it. Also, the ID works everywhere other than the Support Communities (such as iTunes Store and Apple Store online).
    Has anyone else run into this problem? If a Host happens to see this, I'd love any suggestions as to how to get this straightened out. I was quite active on the old discussion boards and would like to continue to be on the new version!

    I got an email directly from the apple person who manages the support communities. He's been helping lots of people out with the transition. It turns out the root of my problem was having the same email address associated with the two different Apple IDs as the "primary email address." If you have two IDs, that could also be your problem. Make sure they all have different email addresses.

  • Cant open itunes. get error message 7 followed by error message windows error 127.     i have redownloaded new updates with luck.   window xp

    cant open itunes. get error message 7 followed by error message windows error 127.     i have redownloaded new updates with luck.   window xp

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

Maybe you are looking for

  • Script for validating Text fields or numeric fields

    I'm looking for a simple script that will check the entered data in a specific field.If i enter numbers in the name/last name field i should get a pop up message that entering numbers in this field are not allowed. (And vice versa regarding numeric f

  • Installing oracle 10.2.0.2 x86 on solaris sparc 64bit

    hi, Can i install oracle 10.2.0.2 x86 on solaris sparc 64 bit server. Regards, Veeresh S

  • Problem Applying Profile - Windows computer Connecting to OSX Network

    I have an Airport, whose network is being administered on my macbook pro, but my Dell Inspiron 1520 Laptop is not able to connect to due to "problem applying profile." Is this because it has a g card trying to connect to an N network? Or due to it be

  • Why doesn't my webcam work?

    My Macbook Air has a builtin webcam. It worked fine a few days ago but now it's suddenly stopped. When I go on Facetime it comes up with an image of a camera with a line through it. On Photo Booth it says there is no camera connected. Why is this?

  • Morroring of serial interface....??

    Hi.. Is it possible to mirror a WAN interface on the router.Means if the packets are coming on one serial interface can go to another mirrored serial interface at the same time. i need to analyze A WAN link with out putting the analyzer in between th


HashFlare