Getting error message after installing 990fxa-GD80

I get the following message:
Posted April 27, 2013 at 2:47PM
EFI Shell Version 2.31 [4.633] Current running mode 1.1.2
Map: Cannot find required ma name
Press Esc in 5 seconds to skip startup.nsh, any other key to continue
shell>

>>Posting Guide<<
Did you set boot priority?

Similar Messages

Help! Still get error message after installing new hard drive

The original problem is below and thought that it would help to include it to see the initial problem.
I went out and bought a new hard drive (500gb) and installed it in my laptop. I went to use the restore disks and I got the same exact error mentioned below. I used a set of disks that I copied from the original recovery disk and it still did the same. What is the error code and how can I fix this!!
Please help!!
I have a Satellite A215-S7444 laptop and everytime I go to restore the drive to it's factory settings using the Toshiba recovery wizard I get the following error: ERROR: 03-EEEE-000, AN ERROR HAS OCCURRED, PRESS [OK] TO TURN OFF COMPUTER.
Just a note, I have used my recovery disks to restore the factory settings before with no problems at all, now I get this message. All the files are accesible on the CD and I have no virus' on my computer.
Lastly, the image part of the drive (The one that is like 1.5 gb) which is usually visible is not any more and has not been for a bit when you should see it when you open "My computer". You can however see it when I go to "Administrative Tools-Computer Management." It states that the drive is Healthy (EISA Configuration), type is basic, and there is no file system associated with the drive and there is no drive letter for it either.

Thanks for your quick reply! I was wondering if anyone would reply!
I made the copies on a suggetion that the original may be scratched or something so I figured what the heck? I did format the hard drive though. It is a Seagate 500gb hard drive. I only formatted the whole drive and figured that the restore disks would make the additional partition.
Aside from that, it's the same error message that I had on the original drive. The original drive and OS works (Vista), but I wanted to restore it because I just wanted to wipe everything and start clean. What can be causing the error message, and what IS the error message?
Anymore suggestions or help would be great as I am in desperate need of getting my computer back to working.
Thanks again for replying!

TS1717 I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden

HT5957 Ios7.0.2 keep getting error message cannot install on my IPAD 2. Please help.

Cannot install IOS 7.0.2 on my ipad 2. Keep getting error message cannot install. Please help

Perform a "hard reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
Then test to see if it solved the problem. Then try again.

Trying to update frpm itunes 10 to itunes11, but get error message after installation

I am trying to update my itunes to be compatible with my replaced iphone 4s (apllecare replacement) that is not compatible with my current iTunes 10.6. I have tried several times to upload th enew version of iTunes to no avial getting an error message after a "successful installation" and the itunes reverts to 10.6. Since my imac was an older unit I had to update to OSX 10.6.8 (sucessfully) and increase my RAM. I am 120bucks in the hole plus the 49 dolar surcharge for the iphone replacement and i am still no closer to restoring my phone. Help please

First backup your music and content.
Then delete iTunes 10.6 Drag the application from Finder > Applications to Trash. Empty Trash
Try and install 10.7 first iPhone 4s will work with this. You can find the download here
http://support.apple.com/kb/DL1576
Install it. Does itunes 10.7 now appear? Is your content all there? Connect up your iPhone and start syncing.
From there if you want to you can upgrade to iTunes 11 but it is only necassary if you have an iPhone 5

Get error message after trying all the fixes

My hp psc 1315 all-in-one worked fine until today..trying to scan a doc got this error message --
An unexpected error has occurred. Check OK to close program, and then try the following:
--restart the program
--restart the PC and then try again
--reinstall the Photo and Imaging software and try again
I tried all these - and downloaded new software after uninstall of old.
Still getting error message -- any suggestions please?
Thanks in advance.

Hello golden1, and thanks for the reponse!
I would suggest following the steps laid out in this document: An Unexpected Internal Error Has Occurred which is found on http://hpanswers.blogspot.ca.
Step 1:
-In C:\Windows folder, look for "Twain_32", which should be there. Also, look for a folder called "Twain32". If this folder exists, it will be empty. Copy and paste the contents of "Twain_32" into "Twain32".
Step 2:
- In "Services" (to access Services, Go to Start, then Run. Type services.msc and hit enter. Make sure the service named Remote Procedure Call is Started.
- Go to Shell Hardware Detection, right click, and select properties.
- Set the Startup Type as Manual and hit Apply. Then you should be able to Start the service by hitting Start.
- Try to scan using the software. If you are unable to scan, try uninstalling and reinstalling the printer software.
Step 3:
If you if you are using downloaded software instead of the printer CD:
-Go to the Start menu, and go to Run. Then type %temp% and hit Enter.
-Locate the correct folder starting with "7z" (the correct folder contains "Util" and "CCC" folders).
-Open folder "Util".
- Open folder "CCC".
- Please run the L3uninstall.bat.
- When the uninstall has completed, restart the computer.
- Run Disk cleanup in "System Tools"
- Download and install the latest version of Adobe flash player: http://get.adobe.com/flashplayer/
- Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
- Rename the twain_32 folder "twain_old".
- Restart computer.
- Download printer software and reinstall.
If you are using the printer software disc, follow these steps instead of downloaded software:
- Go to the Start menu, and go to Computer.
- Double-click on the icon for the HP printer CD.
- Open folder "Util".
- Open folder "CCC".
- Please run the L3uninstall.bat.
- When the uninstall has completed, restart the computer.
- Run Disk cleanup in "System Tools"
- Download and install the latest version of Adobe flash player: http://get.adobe.com/flashplayer/
- Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
- Rename the twain_32 folder "twain_old".
- Restart computer
- Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
- Rename the twain_32 folder "twain_old".
- Restart computer.
- Download printer software and reinstall.
Step 4:
- Download an updated twain_32.dll file and place it in C:\Windows>twain_32. Replace the new file with the old.
Step 5:
- Perform a system restore, if the issue occurred recently. Be sure that you select a restore point dated before the issue occurred. You can reference this document on how to do a system restore: http://windows.microsoft.com/en-CA/windows7/products/features/system-restore
If none of these steps do not resolve the issue, I 2would suggest you re-format the computer.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Error messages after installing mavericks

as soon as i installed mavericks i started getting error messages - "com.apple.safariServices quit unexpectedly while using the WebKit2 plug-in" i get a similar message about ibooks, can anyone help me? i cant open either of them?

Download and install this update, even though you've already updated.
(26492)

Anyone getting this pop up error message after installing Lion?

After installing Lion I now get random pop up error messages that say...There was a problem connecting to the server. URL's with the type "file" are not supported. I have to keep closing them. Any ideas what to do?

Actually, In my case, turning off Time Machine didn't help. I had the same problem. We definitely traced it to Time Machine. The "Fix" was this: plugged in and designated different external HD as Backup volume. Then unplugged it and plugged in the original disc (after testing in in a different machine) and now the computer recognized it and error message stopped popping up. The Apple tech was as puzzled as I as to why this worked, but perhaps, forcing the machine to re-recognize it (or maybe even gettting it recognized by a different machine first) somehow worked some magic.

An internal error occurred....why do I get this message after installing adobe reader

I have a mac pro, installed the adobe reader, everything fine until I try to use it then I get the message "An internal error occured" what is wrong...thanks, Lucy

Check for the permissions.
Login as administrator account.

I Keep getting this error message after installing elements 7

I Keep getting this error message,-Photoshop Elements Help could not be found. Please re-install Photoshop Elements to fix this problem.

Moving this discussion to the Photoshop Elements forum.
Philipk91962784 what operating system are you installing Photoshop Elements on?

Getting this error message after installing and clicking getting started

I have been getting this error message when i click the Getting Started option for oracle
"Windows cannot find 'http://127.0.0.1:%HTTPPORT%/apex/f?p=4950'. Make sure you typed the name correctly, and then try again."
any ideas on what to do about this?

Obvious thing to do is to correct Get_Started url shortcut.
If you had searched the forum, you'd found previous threads and solutions to go, e.g.:
{thread:id=2279339}
{thread:id=2277895}

Error Message after installing Photoshop & Illustrator (CS2) on new iMac

When I launch Illustrator or Photoshop (both CS2) on my new iMac 2.8 GHz, I get the error message: "Connection Failed. server may not exist or is not operational at this time. Check the server name or IP address and your network connection and try again."
I click OK and they open, but this behavior is getting OLD. I've uninstalled and re-installed and I continue to get the error every time I open these applications. It only happens with Illustrator and Photoshop. I'm in the process of transferring all my files and apps from my old G4 which is connected via ethernet. I've de-activated and removed the old copies on the G4. Does anyone know what is causing this error message and how I can remedy the situation? Thanks for your help.
(24" 2.*GHz Core 2 Duo iMac / OS 10.5.6 / 2 GB memory)

I've just done almost exactly this. Moved to a brand new imac runnning Leopard, (but I've got the newer model imac - 4Gb, 2.93 Ghz 10.5.6) and not yet bought CS4.
I installed both Illustrator and Photoshop CS2 from the disc (migrating didn't work, suprise suprise so I just wiped everything off and started with a clean install) but both still refused to start until I'd repaired permissions. After I did that it worked fine.
Even using Rosetta, Photoshop CS2 seems to be faster than on the G5 imac I've just replaced (especially using an external firewire 800 drive as a scratch disc). And no apparent bugs so far.

Error message after installing 10.8.2 update

After installing the osx 10.8.2 update the mok resrtarts and give a error message: "the update could no be installed" or so. As I look up in the system info the update appears al isnatlled. Why?

I'm another user with same issue, started right after the upgrade, appears consistently with login/out, sleep/wake, rarely otherwise.
? some launchd process calling usereventagent which then crashes
Application Specific Information:
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFNumber length]: unrecognized selector sent to instance 0x5088002c7'
abort() called
terminate called throwing an exception
This is on a 2.66 GHz Quad-Core Xeon. No similar issue with my Air which I also upgraded to 10.8.2, so I suspect it's a launchd process installed by something which I and others have added that gets run at login and logout (and less frequently at other times).

Error Messages after Instaling 10.6.2

After installing !0.6.2 I get the following error messages--System extension cannot be used. The system extension"/System/Library/Extensions/hpPluginInit.kext" was installed improperly and cannot be used.Please try reinstalling it or contact the products's vendor for an update --- Second Message---System extension cannot be used.The system extension"System/Library/Extensions/CDSDAudioCaptureSupport.Kext" was installed improperly and cannot be used. Please try reinstallingit or contact the products vendor for a update,
Every thing appears to be operating OK.Should I delete the extesions or what repair should I implement to correct the problem
Thanks A Lot For Your Help

Trying to update with the latest drivers didn't do me any good.
HP has the worst software and horrible update instructions.
This is the page that purports to having the latest for snowleopard
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadInst?swfsequence=1&lc=en&dlc= en&cc=us&lang=en&softwareitem=oj-74786-1&os=219&product=3737195
I found I had to specifically delete the offending file "hpPlugInInit.kext" before I no longer received that error message.
HP also has this firmware update:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-71331-1 &lc=en&dlc=en&cc=us&lang=en&os=219&product=3737195
There are no instructions telling me if this has or has not been included in my printer.
I'm guessing at the instructions, and I'm going to run the program. But who know at the success.
I'm never buying another HP anything. Especially if Apple offers me a "deal" on it.

Error message after installing latest FlashPlayerPlugin

After installing FlashPlayerPlugin_11_9_900_117.exe with the downloaded install file install_flashplayer11x32_mssd_aih.exe when I open Firefox and go to another tab I get this error message:
The exception unknown software exception (0xc0000710) occurred in the application at location 0x.......... (this is different each time) Click OK to terminate the program.
I do this and everything seems to work OK but I keep getting the error message each time I open Frirefox and move to different pages.
What can I do to fix this problem?

Hi - I've just uninstalled Flash Player 11.9 and installed archived version 11.8.800.168 as advised in your FixNow Support. At 72 years of age I find having to put things like this right on my laptop is usually most confusing,
but it has solved the problem simply and easily!
Thank you so much!

Getting error message after installing 990fxa-GD80

Similar Messages

Maybe you are looking for