Getting error when reading xml file from a remote connection

Hi all,
I want to read an xml file from a remote connection, not from my local machine.So when i am creating the data server i am giving the host name(that is the ip of the machine where the xml file is located), giving the proper username and password and giving the path of the xml file. When i am testing the connection the error that is coming:- "Connection failed and the xml file could not be created, verify that you have write permission in the directory"...
but read write and execute permissions have been given on the directory as well as to the file...
Regards,
Sourav

Hi Sutirtha,
Initially I have started the agent.sh giving the agent name <agent name>and port number 20910 and defined it in the topology manager it is showing that the agent test is succesful. Then I tested a particular Data server against that agent and the test was successful.
After this we had stopped the agent and restarted it.
However now suddenly the testing against the remote agent is failing with the following excep:
java.lang.Exception:
     at com.sunopsis.graphical.l.pm.a(pm.java)
     at com.sunopsis.graphical.l.pm.s(pm.java)
     at com.sunopsis.graphical.l.pm.g(pm.java)
     at com.sunopsis.graphical.l.pm.a(pm.java)
     at com.sunopsis.graphical.l.pm.a(pm.java)
     at com.sunopsis.graphical.l.iz.actionPerformed(iz.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.Dialog$1.run(Unknown Source)
     at java.awt.Dialog.show(Unknown Source)
     at java.awt.Component.show(Unknown Source)
     at java.awt.Component.setVisible(Unknown Source)
     at com.sunopsis.graphical.l.pm.q(pm.java)
     at com.sunopsis.graphical.l.pm.<init>(pm.java)
     at com.sunopsis.graphical.frame.b.jh.bx(jh.java)
     at com.sunopsis.graphical.frame.bo.w(bo.java)
     at com.sunopsis.graphical.frame.bo.d(bo.java)
     at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
PS: do i have to modify any file after or before starting the odi agent
Thnks and Rgds,
Sourav
Edited by: user13263578 on Mar 15, 2011 9:35 PM
Edited by: user13263578 on Mar 15, 2011 9:48 PM

Similar Messages

PL/SQL: numeric or value error when extracting xml file from tables.

create or replace FUNCTION proc_generate_xml_from_tables(p_directory in varchar2,
p_areaname in varchar2)
return integer
AS
qryCtx DBMS_XMLGEN.ctxHandle;
result CLOB;
clob_len number := 0;
file_ptr utl_file.file_type;
oTableName restore_metadata.table_name%type;
o_filename restore_metadata.table_name%type;
cursor metadata_restore_list(p_area varchar2) is
select * from restore_metadata
where instr(area_name,upper(p_Area)) > 0
order by degree;
vtabcount number := 0;
sql_stmt varchar2(300);
BEGIN
dbms_lob.createtemporary(result, true,dbms_lob.session);
oTableName := upper('MAINT_ACTVS');
vtabcount := 0;
sql_stmt := 'select count(*) from ' || oTableName;
execute immediate sql_stmt into vtabcount;
o_filename := oTableName || '.xml';
file_ptr := utl_file.fopen(p_directory,o_filename,'W');
dbms_output.put_line(oTableName);
qryCtx := dbms_xmlgen.newcontext('select * from ' || oTableName);
result := dbms_xmlgen.getxml(qryCtx);
--dbms_output.put_line(result);
clob_len := dbms_lob.getlength(result);
dbms_output.put_line('Length of the clob file' || clob_len);
utl_file.put_line(file_ptr,result);
utl_file.fclose(file_ptr);
dbms_xmlgen.closeContext(qryCtx);
dbms_lob.freetemporary(result);
return 0;
EXCEPTION
when others THEN
utl_file.fclose(file_ptr);
dbms_output.put_line('Table Name into Consideration :- ' || oTableName);
dbms_output.put_line('Oracle Error Number:- ' || sqlcode || ' Ora Message :- ' || sqlerrm);
return -1;
END;
I am getting the following errors..
SQL> @temp1.sql
MAINT_ACTVS
Length of the clob file34245
Table Name into Consideration :- MAINT_ACTVS
Oracle Error Number:- -6502 Ora Message :- ORA-06502: PL/SQL: numeric or value error
What am I doing wrong here?
DB version is Oracle 10g
Edited by: userAtoZ on May 6, 2011 2:55 PM

>
My problem lies that my xml file is having data more than 32 K.
When I write it 32K at a time then it work fine.
>
Then break it down.
l_pos number;
WHILE (l_pos <= clob_len)
LOOP
UTL_FILE.PUT_LINE (file_ptr,DBMS_LOB.SUBSTR ( RESULT , 32767,l_pos));
l_pos := l_pos + 32767;
END LOOP;
utl_file.fclose(file_ptr);

Error while retreiving xml file from database

Hi-
I am trying to configure Planning and getting the following error message at instance configuration step:
"Error while retreiving xml file from database"
We looked at PlanningSystemDB.properties, changes server name to its ip, reinstalled planning, made sure both auth methods are selected (sql server and windows), created new relational repository.. still the same error.
Here is the contents of the configtool error file:
(Dec 11, 2008, 04:36:44 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:37:09 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:38:41 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:07 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:12 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:22 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:40:46 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:41:05 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:48:28 PM), com.hyperion.cis.DBConfigurator, ERROR, Invalid SQL statement: begin transaction IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PROPERTIES]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PROPERTIES IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APP_CLUSTER_DTL]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APP_CLUSTER_DTL IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APPLICATION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APPLICATION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_DATASOURCE]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_DATASOURCE IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_CLUSTER]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_CLUSTER IF EXISTS (select * from sysobjects where id = object_id(N'[HSP_ACTION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSP_ACTION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PI_INFO]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PI_INFO commit begin transaction CREATE TABLE HSP_ACTION ( ID INTEGER NOT NULL IDENTITY, CONSTRAINT PK_HSP_ACTION PRIMARY KEY(ID) , FROM_ID INTEGER, TO_ID INTEGER, ACTION_ID INTEGER, OBJECT_TYPE INTEGER, PRIMARY_KEY VARCHAR(255), ACTION_TIME DATETIME ); CREATE TABLE HSPSYS_CLUSTER ( CLUSTER_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), CONSTRAINT PK_HSPCLUSTER PRIMARY KEY(CLUSTER_ID) ); CREATE TABLE HSPSYS_DATASOURCE ( DATASOURCE_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), APP_ID INTEGER, RDB_SERVER_URL VARCHAR(255), RDB_TYPE VARCHAR(255) NOT NULL, RDB_CATALOG_NAME VARCHAR(255) NOT NULL, RDB_USER VARCHAR(255) NOT NULL, RDB_PASSWORD VARCHAR(255), RDB_DRIVER VARCHAR(255) NOT NULL, ESS_SERVER VARCHAR(255) NOT NULL, ESS_USER VARCHAR(255) NOT NULL, ESS_PASSWORD VARCHAR(255), CONSTRAINT PK_HSPDTASRC PRIMARY KEY(DATASOURCE_ID) ); CREATE TABLE HSPSYS_APPLICATION ( APP_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), DATASOURCE_ID INTEGER NOT NULL, CONSTRAINT FK_HSPAPP_DSID FOREIGN KEY(DATASOURCE_ID) REFERENCES HSPSYS_DATASOURCE, VERSION VARCHAR(255) NOT NULL, CONSTRAINT PK_HSPAPP PRIMARY KEY(APP_ID) ); CREATE TABLE HSPSYS_APP_CLUSTER_DTL ( APP_ID INTEGER NOT NULL , CONSTRAINT FK_HSP_APP_ID FOREIGN KEY (APP_ID) REFERENCES HSPSYS_APPLICATION , CLUSTER_ID INTEGER NOT NULL, CONSTRAINT FK_HSPCS_CLID FOREIGN KEY(CLUSTER_ID) REFERENCES HSPSYS_CLUSTER, CONSTRAINT PK_APP_CLSTR_DTL PRIMARY KEY(CLUSTER_ID, APP_ID) ); CREATE TABLE HSPSYS_PROPERTIES ( PROPERTY_ID INTEGER NOT NULL, OBJECT_ID INTEGER NOT NULL, PROPERTY_NAME VARCHAR(255) NOT NULL, PROPERTY_VALUE VARCHAR(255), CONSTRAINT PK_HSPPROP PRIMARY KEY(PROPERTY_ID, OBJECT_ID, PROPERTY_NAME) ); CREATE TABLE HSPSYS_PI_INFO ( XML_FILE NTEXT NOT NULL ); commit
(Dec 11, 2008, 04:50:32 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
Thanks for any help.

After spending 2+ hrs with Hyperion Support nothing got resolved.. Just to give more background on this problem, we originally reconfigured all Hyperion components to use different SQL server, that is when the problem started happening as soon as we got to Planning Instance Configuration. Could this be the situations when old server name is still somewhere in the system?.. Could this be Shared Services problem.
Here is another quote from SharedServices_Security.log
2008-12-12 15:08:48,249 [http-58080-Processor1] WARN com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) - Exception getting Child Roles in hierarchy due to Illegal or invalid id.dflt passed in. Please check the argument.
2008-12-12 15:31:18,121 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 1016
2008-12-12 15:31:30,823 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:31:41,229 [http-58080-Processor4] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:31:41,229 [http-58080-Processor4] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:38:01,938 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 813
2008-12-12 15:38:35,453 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:42:09,776 [http-58080-Processor3] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor3] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:42:09,776 [http-58080-Processor2] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor2] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

Product Instance Registration Error: "System Failure: Error while retrieving xml file from database"

Hi S9 installation Gurus,
Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
Detail of Problem:-
After Susessful configuration of
1) Foundation Services (Hyperion Shared Services)
2) Essbase administration services
3) Essbase Server
4) Hyperion reporting and analysis
5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
Error Point: when i tick ckeck box in front of Product instance registration
click next
create instance
click next
instance name-Plan1
Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
server port: 8300 (system suggesting)
tick on active instance
click next
Error Pop Up "System Failure: Error while retrieving xml file from database"
Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=puser
SYSTEM_DB_PASSWORD=GGAKFJ
SYSTEM_DB_CATALOG=p1db
SYSTEM_DB_TYPE=SQL
INSTANCE=
Note: puser (SQL Authenticated user)
Thanks
Kumar
Edited by: user10385300 on Dec 4, 2008 5:44 AM

This has been resolved at :- Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"
Cheers
John
http://john-goodwin.blogspot.com/

Problem while reading XML file from Aplication server(Al11)

Hi Experts
I am facing a problem while reading XML file from Aplication server using open data set.
OPEN DATASET v_dsn IN BINARY MODE FOR INPUT.
IF sy-subrc <> 0.
EXIT.
ENDIF.
READ DATASET v_dsn INTO v_rec.
WHILE sy-subrc <> 0.
ENDWHILE.
CLOSE DATASET v_dsn.
The XML file contains the details from an IDOC number , the expected output is XML file giving all the segments details in a single page and send the user in lotus note as an attachment, But in the present output after opening the attachment i am getting a single XML file which contains most of the segments ,but in the bottom part it is giving the below error .
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/SHPORD_0080005842.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
for all the xml its giving the error in bottom part , but once we open the source code and if we saved in system without changing anything the file giving the xml file without any error in that .
could any one can help to solve this issue .

Hi Oliver
Thanx for your reply.
see the latest output
- <E1EDT13 SEGMENT="1">
<QUALF>003</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/~1922011.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
E1EDT13 with QUALF>003 and <E1EDT13 SEGMENT="1">
with <QUALF>001 having almost same segment data . but E1EDT13 with QUALF>003 is populating all segment data
properly ,but E1EDT13 with QUALF>001 is giving in between.

Reading XML file from UNIX

I am reading XML file from unix using :
FORM read_file USING p_name.
DO.
    READ DATASET p_name INTO WXML_LINE LENGTH LENG.
ENDDO.
Then I am using subroutine below where I get a short dump at
case X_NODE->get_type( ).
FORM get_data tables   Y_CAPXML   structure GV_CAPXML
              using value(x_node) type ref to if_ixml_node.
data: INDENT      type i.
data: PTEXT       type ref to if_ixml_text.
data: STRING      type string.
data: TEMP_STRING(100).
case X_NODE->get_type( ).
    when if_ixml_node=>co_node_element.
      STRING = X_NODE->get_name( ).
      GV_NODETEXT = STRING.
    when if_ixml_node=>co_node_text.
      PTEXT ?= X_NODE->query_interface( IXML_IID_TEXT ).
      if PTEXT->ws_only( ) is initial.
        STRING = X_NODE->get_value( ).
        case GV_NODETEXT.
          when 'NIIN'.
            move STRING to GV_CAPXML-NIIN.
          when 'FED_x0020_STOCK_x0020_CLASS'.
            move STRING to GV_CAPXML-fed_stock_class.
          when 'DODIC'.
            move STRING to GV_CAPXML-dodic.
         endcase.
The text for the short dump is : STACK_STATE_NO_ROLL_MEMORY
Can someone please explain what is it mean.
Thanks.

May be this blog can help:
<a href="/people/r.eijpe/blog/2005/11/21/xml-dom-processing-in-abap-part-ii--convert-an-xml-file-into-an-abap-table-using-sap-dom-approach for Blog</a>
Sri

How to read .xml file from embedded .swf(flash output) in captivate

I have been trying to read .xml file from the .swf (Flash output) that is embedded within the captivate file but no luck yet . Please if anyone got any clue on how get this thing done using Action script 3.0 then let me know. I am using Adobe Captivate 5.5 at present and Flash CS 5.5.
I am well aware about how to read .xml file through action script 3.0 in flash but when insert the same flash in captivate and publish nothing comes in captivate output. I would higly appreciate if anyone could help me out with that.
Here is is graphical demonstration of my query :
Message was edited by: captainmkv

Hi Captainmkv,
Does the information in this post cover what you're trying to do: http://forums.adobe.com/message/5081928#5081928
Tristan,

System Failure:-Error while retreiving xml file from database

I install Planning 9.3.1 at Windows2003 server SP1 and MS SQL 2000 SP3A. In Hyperion Planning Instance Registration I take "System Failure:-Error while retreiving xml file from database" error in Configuration .
Please help
Thanks

I also have the same error. Win2000 Server and MS SQL 2005.
Maybe someone made request for official information from Oracle about this issue?
I'd like to change MS SQL to Oracle 10g, I hope this can helps (if reason in RDBMS). But if reason in logic of scripts... I dont't know...

Read XML file from presentation server

Hi All,
I want read XML file from presentation server currently i am using GUI_UPLOAD fm . but it is reading some junk data.
DATA : BEGIN OF upl OCCURS 0,
          f(255) TYPE c,
       END OF upl.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename = D:\XX.XML'
      filetype = 'BIN'
    TABLES
      data_tab = upl.
is there any other alternative.
Thanks
Swarup,

Hi Swarup,
Use method IMPORT_FROM_FILE of class CL_XML_DOCUMENT.
A sample code snippet :-
PARAMETERS: p_filnam TYPE localfile OBLIGATORY
DEFAULT 'C:\Documents and Settings\ssaha\Desktop\test.xml'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_filnam.
DATA: l_v_fieldname TYPE dynfnam.
l_v_fieldname = p_filnam.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = l_v_fieldname
IMPORTING
file_name = p_filnam.
START-OF-SELECTION.
TYPES:
BEGIN OF ty_tab,
name TYPE string,
value TYPE string,
END OF ty_tab.
DATA:
lcl_xml_doc TYPE REF TO cl_xml_document,
v_subrc TYPE sysubrc,
v_node TYPE REF TO if_ixml_node,
v_child_node TYPE REF TO if_ixml_node,
v_root TYPE REF TO if_ixml_node,
v_iterator TYPE REF TO if_ixml_node_iterator,
v_nodemap TYPE REF TO if_ixml_named_node_map,
v_count TYPE i,
v_index TYPE i,
v_attr TYPE REF TO if_ixml_node,
v_name TYPE string,
v_prefix TYPE string,
v_value TYPE string,
v_char TYPE char2.
DATA:
itab TYPE STANDARD TABLE OF ty_tab,
wa TYPE ty_tab.
CREATE OBJECT lcl_xml_doc.
CALL METHOD lcl_xml_doc->import_from_file
EXPORTING
filename = p_filnam
RECEIVING
retcode = v_subrc.
CHECK v_subrc = 0.
v_node = lcl_xml_doc->m_document.
CHECK NOT v_node IS INITIAL.
v_iterator = v_node->create_iterator( ).
v_node = v_iterator->get_next( ).
WHILE NOT v_node IS INITIAL.
CASE v_node->get_type( ).
WHEN if_ixml_node=>co_node_element.
v_name = v_node->get_name( ).
v_nodemap = v_node->get_attributes( ).
IF NOT v_nodemap IS INITIAL
* attributes
v_count = v_nodemap->get_length( ).
DO v_count TIMES.
v_index = sy-index - 1.
v_attr = v_nodemap->get_item( v_index ).
v_name = v_attr->get_name( ).
v_prefix = v_attr->get_namespace_prefix( ).
v_value = v_attr->get_value( ).
ENDDO.
ENDIF.
WHEN if_ixml_node=>co_node_text OR
if_ixml_node=>co_node_cdata_section.
* text node
v_value = v_node->get_value( ).
MOVE v_value TO v_char.
IF v_char <> cl_abap_char_utilities=>cr_lf.
wa-name = v_name.
wa-value = v_value.
APPEND wa TO itab.
CLEAR wa.
ENDIF.
ENDCASE.
* advance to next node
v_node = v_iterator->get_next( ).
ENDWHILE.
LOOP AT itab INTO wa.
ENDLOOP.
Regards
Abhii

I want to make a schedular which read xml files from a folder ,import in Indesign template then export as a pdf....

i want to make a schedular probably in Coldfusion or using javascript , which read xml files from a folder ,import in Indesign template then export as a pdf....

I don't think you understand: I want to open Dreamweaver and build a brand new site, then when I am done I want to host the dreamweaver site on the Business Catalyst platform. I dont want to use anything in BC to build the site, I just want to use the hosting platform. I do not want to import a BC site into dreamweaver or anything like that. I just want to use BC the same way I would use godaddy, or uhost or any other hosting provider. Based on your response you said that "of course its possible to build a BC site in Dreamweaver" I dont want to build a BC site, I want to build a Dreamweaver site and host it on the BC platform. Like I said before it doesnt seem like this is possible. As of now we can only build a new site in MUSE and integrate it into BC without using a BC template. Can you understand what I am saying. I DONT WANT TO USE A BC TEMPLATE, I WANT NOTHING TO DO WITH BC WHILE I AM BUILDING THE SITE WITH DREAMWEAVER, JUST LIKE MUSE DOES.

FM to read XML files from Application server in ECC5.0

Hi All,
We need to pick up an XML file from Application server/FTP server. The requirement is to parse the XML file and process it to create material master. SAP provides standard function modules to read XML files.
Now we need to read the XML file contents of MM01 and upload into SAP Data Base through BAPI
I need to know about the Function modules to read XML files from Application Server and also about the FM's that will update the Date base tables with the data obtained form XML files.
Regards
Prathima

Parsing XML data:
http://help.sap.com/saphelp_nw04/helpdata/en/86/8280ba12d511d5991b00508b6b8b11/frameset.htm
or alternatively check out ABAP online help for "CALL TRANSFORMATION".
For creating the material master look at BAPI_STANDARDMATERIAL_CREATE.
Thomas

Reading XML file from application server and put into internal table-4.6C

Dear All,
Is there any way of reading XML file from application server to SAP? I am using 4.6C. Function module SCMS_STRING_TO_XSTRING function module is not available. Please suggest.
Thanks and regards,
Atanu

Hi Atanu!
Simply use the XSLT transformation 'ID'.
FIELD-SYMBOLS <ls_result> TYPE ANY.
CREATE DATA lref_data TYPE (your_structure).
ASSIGN lref_data->* TO <ls_result>.
CALL TRANSFORMATION id
SOURCE XML xmlstr
RESULT result = <ls_result>.
"xmlstr" contains your XML file. Just read it into it via standard I/O operations. "<ls_result>" will contain your DDIC formatted content.
Best regards
Torsten

Function module to read xml files from application server

Hi experts,
I need to read xml files from application server to sap. Is the any siutable function moldule for that?

Hi Cenosure,
Donno about FM which will upload data directly to SAP, I think you have to do some mapping for it so that it will suit the SAP format. Again it depends on your requirement..
Please elaborate more about your requirement.
Please have a look on below FM
TEXT_CONVERT_XML_TO_SAP
Also search on SCN there are many threads on the same topic available.
http://abapreports.blogspot.com/2008/09/upload-xml-file-from-application-server.html
This is the link which will give you the Code
http://www.geocities.com/rmtiwari/Resources/MySolutions/Dev/Codes/Report/Z_RMTIWARI_XML_TO_ABAP_46C.html
Use this XML file to Upload the same, this Program will work for your XML file also,
http://www.geocities.com/rmtiwari/Resources/MySolutions/Dev/Codes/Report/input_xml.xml
See the below thread also
Upload XML to internal table and vice versa in SAP 4.6C
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

Compilation Error when Readimg XML File.....Help me plz...

Hi Dudes,
I am new to XML, when I am trying to read (parsing) the xml file from url, I am getting the following error.(using JAXP)
xml2jsp.java:50: createTextNode(java.lang.String) in org.w3c.dom.Document cannot
be applied to () Text index = request.createTextNode();
here is the source code:
import java.net.*;
import java.io.*;
import org.w3c.dom.*;
import javax.xml.parsers.*;
import javax.xml.transform.*;
import javax.xml.transform.stream.StreamResult;
import javax.xml.transform.dom.DOMSource;
public class xml2jsp {
private static String server
= "http://webservices.amazon.com/onca/xml?Service=AWSECommerceService&SubscriptionId=026CJ8XE8ZGWH4H58YG2&AssociateTag=" +
                                   "bookinscom-20&Operation=ItemLookup&IdType=ASIN&ItemId=0060006781&ResponseGroup=Reviews";
public static void main(String[] args) {
//String server = DEFAULT_SERVER;
try {
          // Build the request document
          DocumentBuilderFactory builderFactory
          = DocumentBuilderFactory.newInstance();
          DocumentBuilder builder
          = builderFactory.newDocumentBuilder();
          Document request = builder.newDocument();
          Element methodCall = request.createElement("methodCall");
          request.appendChild(methodCall);
          Element methodName = request.createElement("methodName");
          Text text = request.createTextNode("calculatexml2jsp");
          methodName.appendChild(text);
          methodCall.appendChild(methodName);
          Element params = request.createElement("params");
          methodCall.appendChild(params);
          Element param = request.createElement("param");
          params.appendChild(param);
          Element value = request.createElement("value");
          param.appendChild(value);
          // Had to break the naming convention here because of a
          // conflict with the Java keyword int
          Element intElement = request.createElement("int");
          Text index = request.createTextNode();
          intElement.appendChild(index);
          value.appendChild(intElement);
          // Transmit the request document
          URL u = new URL(server);
          URLConnection uc = u.openConnection();
          HttpURLConnection connection = (HttpURLConnection) uc;
          connection.setDoOutput(true);
          connection.setDoInput(true);
          connection.setRequestMethod("POST");
          OutputStream out = connection.getOutputStream();
          TransformerFactory xformFactory
          = TransformerFactory.newInstance();
          Transformer idTransform = xformFactory.newTransformer();
          Source input = new DOMSource(request);
          Result output = new StreamResult(out);
          idTransform.transform(input, output);
          out.flush();
          out.close();
          // Read the response
          InputStream in = connection.getInputStream();
          Document response = builder.parse(in);
          in.close();
          connection.disconnect();
          NodeList doubles = response.getElementsByTagName("double");
          Node datum = doubles.item(0);
          Text result = (Text) datum.getFirstChild();
          System.out.println(result.getNodeValue());
catch (Exception e) {
System.err.println(e);
Please send your valueable suggestions to sort out the error.
Looking forward for your favourable reply.
Regards
Sridhar

You need to spcify a string when you try to create a text node. If your goal is to have the <int> element with no content (like either <int></int> or <int/>) then do not create the text node and that will be the result.
Dave Patterson

Getting error when reading xml file from a remote connection

Similar Messages

Maybe you are looking for